used Eccentric Presses for sale

DELTECO PE-63 (1998) Swan neck eccentric mechanical press Nominal force: 630 KN Normal stop position: TDC Lifting points: 2 Maximum mass of moving part of die: 136 Kg Max. number of clutches/min in stroke by stroke: 38 Strokes per minute in continuous operation: 100 Minimum travel: 8 mm Maximum travel: 100 mm Maximum height of closed die: 340 mm Slider adjustment: 92 mm Total stop time: 190 ms Spindle adjustment: 80 mm. Safety distance with two hands: 304 mm Max. r.p.m. Flywheel: 380 Electrical Data: Installed power: 5.5 KW Voltage: 380 V. Clutch/brake: Max. pressure: 0.588 Mpa Min. pressure: 0.343 Mpa Pneumatic System: Max. pressure: 0.588 Mpa Min. pressure: 0.440 Mpa Characteristics of the largest die: Maximum mass: 275 Kg Length: 450 mm Width: 310 mm Dimensions: 1500 x 1240 x 2810 mm. Press mass: 4,300 Kg.

Eccentric Press Manufacturer: Edelhoff Press type EPR 4 Pressing force 45 to Year of manufacture: 4-1975 Plunger strokes 150 / min. Plunger adjustment 55 mm Stroke adjustment from 10 - 100 mm

Inv. Num. : 8320 Type: 250 T Producer: GALATO Generated: 2000 Parameters: Compressive force: 250 t Table length: 1500 mm Table width: 1000 mm Stroke length: 130 mm Maximum stroke rate per minute: 22-72 1/min Machine height: 4650 mm Machine length: 2550 mm Machine width: 1340 mm Machine weight: 25000 kg Equipment: ARKU RM 3060.4/21 Uncoiling and leveling system

- Press force 125 t - Stroke 10 - 124 mm - Adjustable plunger 85 mm - Stroke rate 20-100 - Table 920 x 560 mm - Weight 6,100 kg

Inv. Num. : 8437 Type: 50-VE Producer: IMS Created: 2002 Parameters: Compressive force: 50 t Maximum stroke rate per minute: 145 1/min Stroke: 80 mm Adjusting the ram: 75 mm Machine weight: 2300 kg

PRESS DESIGN  drive system: eccentric / crank   openings in uprights: yes   number of slide actions: 1 PRESS FORCES  total force (nominal): 100 toSLIDE  stroke: 125 mm  stroke rate (max.): 70 /minTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 325 mm

- Press force 60 t - Projection 280 mm - Stroke 10 - 90 mm - Adjustable plunger 60 mm - Stroke rate 100 - Table 750 x 530 mm - Weight 3,250 kg There would be 2 machines available!

Stock number: 3855 ECCENTRIC PRESS Manufacturer: PMB, Type: EPF 64 Machine NO.: 744103, Year of manufacture: 1974 Specifications: Gr. pressing pressure 64 to Table size 520 x 700 mm Stroke length 8-96 mm Projection 265 mm Total power 5.5 kW Control Fabr. Pneumatic clutch. Length: 2000 mm, Height: 2500 mm, Width: 1200 mm, Weight: 4000 kg

CAPASITY 100 T

Inv. Num. : 8115 Type: PEKR 400 Producer: Richter Created: 1961 Parameters: Compressive force: 400 t Stroke length: 10-220 mm Maximum stroke rate per minute: 30 1/min Adjusting the ram: 160 mm Motor power: 30 kW Max. sheet thickness: 26 mm One hole in the table: 400/255 mm Machine height: 3750 mm Machine length: 2400 mm Machine width: 3250 mm Machine weight: 42000 kg

Inv. Num. : 7936 Type: T450 RCE Producer: Sangiacomo Created: 2018 Parameters: Compressive force: 450 t Table length: 1800 mm Table width: 1000 mm Stroke length: 20-250 mm Total power requirement: 37 kW Adjusting the ram: 120 mm Maximum stroke rate: 50 1/min Ram dimensions: 1400 x 900 mm Machine height: 4960 mm Machine width: 2880 mm Machine weight: 50000 kg

2 x Schmidt Eccentric Press ZHS-4/36 - 600 tons of pressing force Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

WEINGARTEN DE 200-20 press built in 1975 in Germany is used for precision workpiece machining. The rigid construction combined with a high press force of 200 tonnes make the machine the perfect solution for mass production of various types of parts. The process of precision sheet metal pressing can be fully automated when the WEINGARTEN press is retrofitted with a sheet metal feeder. Technical specifications of the WEINGARTEN DE200-20 200 t press - press force: 200 t - maximum slider stroke: 200 mm - minimum slider stroke: 15 mm - maximum number of slider strokes: 60/min - minimum number of slider strokes: 20/min - slider adjustment: 110 mm