presses used for sale

pressure: 250 tthroat: 360 mmTable dimensions: 1250 x 630 mmtable diameter: 250 mmdimension of ram: 850 x 450 mmdayligth: 800 mmpiston stroke: bis 500 mmdiameter of piston: 400/360 mmram stroke speed: abwärts 200 mm/secram stroke speed: aufwärts 110 mm/sectotal power requirement: 20,5 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Delem ... DA - 65 W Thrust... 160t Bending length ... 3200mm Controlled axes... 3 Drive... Hydraulic Main engine power ... 11kW Machine weight ... 10000kg L x W x H ... 3500x1650x2580mm The machine is in good condition, possible to test under power.

Typ / type: KSTU 3150-15 R Manufacturer / make: Kaiser Baujahr / Year of manufacture: 1994 Preßkraft / rated pressure: 315 t (3150kN) Adjustable ram stroke : 20 - 150 mm Tischgröße / table size: 1780 x 1250 mm Plunger size: 1500 x 1000 mm Installation height at max. stroke at the bottom, adjustment at the top Installation height with max. stroke at bottom adjustment at top: 500 mm Passageway in the table : 1200 x 300 mm Milling in the table : 1300 x 400 x 80 mm Infinitely variable stroke rate : 20 - 120 strokes / min Weight: 46 t connected load: 75 kW

Manufacturer: W. Paul Müller Maschinenfabrik Type: EXP 100 SVHK Stock number: 1025 Year of Make: 1993 Compressive force: 100 tons Projection: 300 mm Plunger strokes: 100 per minute Adjustable plunger: 60 mm Stroke adjustable: 10 - 100 mm Motor power: 5.5 kW Weight: 6400 kg

Key data: 160 t, 800 mm, 500 mm

Manufacturer: VEB Wema Zeulenroda Type: PYE 160 S1 Stock number: 1024 Maximum pressing force: 160 tons Working pressure: 16 MPa Top table: 700 x 450 mm Lower table: 900 x 630 mm Ground clearance: 800 mm Cylinder stroke: 500 mm Downward speed: 200 mm/sec. Upward speed: 125 mm/sec Power requirement: 17 kW Oil volume in the tank: 500 l Weight: 7000kg

Manufacturer: Rudolf Kunkel Maschinenbau GmbH Type: P32 Compressive force: 320 kN (32 tons) Adjustable from 0-320 kN Cylinder stroke: 200 mm Clear width: 300 mm Motor: 5.5 kW Operating pressure: 280 bar Bending capacity: 140 x 20 mm for V125; 200 x 18 (19) mm at V 200 Indicative capacity: 200 at straightening block spacing 1,000 mm Tool height: 240 mm Dimensions: 1,160 mm x 1,200 mm x 1,400 mm Weight: 1,400 kg

Nominal pressing force... 160t Table dimensions ... 1000 x 740mm Max. ram stroke... 25-160mm Plunger Dimensions ... 710 x 425mm Plunger adjustment ... 100mm Installation height ... 455mm Main engine power ... 11kW L x W x H ... 1380 x 1950 x 3350mm Machine weight ... 12180kg The machine is in good condition, possible to test under electricity.

Key data: 20 t, 420 mm

Article number: 13-13-024 Manufacturer: Reyer Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1972 L x W x H: approx. 1200x800x2000mm Weight: approx. 400kg Max. pressing force: approx. 20 tons Table surface: approx. 420x530mm Other accessories on request Price and other technical data on request

Key data: 20 t

Article code: 13-13-023 Manufacturer: Neher Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1972 L x W x H: approx. 1600x1600x2300mm Weight: approx. 1200kg Max. pressing force: approx. 20 tons Wheel Diameter: ca.1600mm Working stroke: approx. 300mm Other accessories on request Price and other technical data on request

Key data: 1200 t, 4000 mm, 700 mm

Manufacturer | Manufacturer: ONA - Pres Description | Name: PYZT 1200 Year of construction | Year of manufacture: 1990 Adjustable pressing force | Adjustable pressing force: 1200 - 12000 kN (1200 t) max. lifting height | max. Lifting height: 700 mm Table / Plunger Size | Table / ram size: 1600 x 4000 mm

Article number: 13-20-001 Manufacturer: Schuler Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1965 L x W x H: approx. 1200x1800x2400 Weight: approx. 2500kg Compressive force: approx. 25000kg Stroke of ram: approx. 8-59mm Max. installation height: approx. 550-1150mm Power requirement: approx. 1.5 hp Other accessories on request Price and other technical data on request

Key data: 250 t, 6050 mm

Manufacturer: EHT Werkzeugmaschinen GmbH Type: 250 - 60 Year of construction: 1998 Working length: 6050 mm Pressing force: 250 tons Oil quantity: 400 l Nominal current: 52 A Main fuse current rating: 80 A Main motor power: 22 kW Control Type: DNC 74 PSG

Nominal pressing force ... 400t Table dimensions... 3100x1500mm Plunger Dimensions ... 3290x1200mm Max. ram stroke ... 460mm Number of strokes ... 10-25/min Control Fagor ... CNC 8055 M Machine weight ... 115000kg The machine is in good condition, possible to test under electricity.

Manufacturer: SMG / Feintool Type: HFA 6300 Year of construction: 1988 Total force: 4000-6300 kN Ring serrated force: 320-3200 kN Counter holding force: 130-1300 kN Safety distance: 153 mm Trailing distance max. 10 mm Closing speed: 120 mm/s Plunger stroke beu max tool height: min.-max. 30-150 mm Tool clamping surface at the top: 900 x 900 mm Tool clamping area at the bottom: 910 x 1350 mm Tool installation height max: 410 mm Tool installation height min: 330 mm Main drive: 90 kW Total connected load: approx. 120 kW Weight of the press: approx. 31 t

Hand screw press, used Balancier, used Typ/ type: PSHZ 25/I Presskraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgrösse/ table size: 400x 500 mm Ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Weight/ weight: 0,9t

Hydraulic press ZHO700N Manufacturer: Presshydraulika Year: 2015 Nominal pressing force ... 700t Clamping table surface ... 2500x1500mm Plunger stroke ... 500mm Installation height ... 1200mm Pestle dimensions ... 2400x1000mm Distance between stand ... 2500mm Control Siemens Force of the lower ejection ... 234t Stroke of the lower ejection ... 200mm Machine weight ... 52000kg L x W x H ... 5150x2870x4710mm The machine is in good condition, possible to test under power.

Type / type: N 25 Year of make: 1977 Manufacturer / make: Weingarten Rated pressure: 25 t Number of strokes: 140 / min Radius slide center to frame: 200 mm Window in frame: 240 mm distance table slide: 250 mm Stroke adjustment / adjustment of stroke: 8 ... 80 mm Ram adjustability/adjustment of ram: 50 mm Ram size / surface of ram: 355 x 220 mm Table size / surface of bed: 560x 400 mm Hole in table: 160 mm Power of main motor:3 kW Weight / weight: 2,23 t

Control Amada Pressing force ... 100t Bending length... 3000mm controlled axes ... 7 Drive... Hydraulic The machine is in good condition, possible to test under power.

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

Hydraulic Horizontal Straightening Press, used Horizontal multi purpose press, used type: HHP160 max. pressing force/ max. tonnage: 160 t Year built/ year of make: 1965 Manufacturer/ make: Pellissier Hanau max. pressing force/ max. tonnage: 160 t Piston stroke/ stroke of plunger: 400 mm Piston diameter / diam. of piston: 300/ 185 mm Extension / depth of throat: 225 mm Table size/ table size: 1150 x 350 mm Pressing speed/ speed of pressing: 16 ... 6 mm / sec Advance/ advance: 75 mm / sec Return/ rapid return: 208 mm / sec Installation width between Kobendruckstück and traverse pressure pieces/ distance between plunger with ram and locators: 320 mm Distance of the pressure pieces on pistons or table / distance between locators of piston and table: 50 ... 888 mm Total p ...