used Hydraulic Presses for sale

Inv. Num. : 8438 Type: AF-200-75 Producer: Arisa Generated: Parameters: Maximum retraction speed: 200 t Top table length: 950 mm Top table width: 750 mm Maximum number of strokes: 20 1/min Ram stroke: 250 mm

Qty. 1 Second-hand extrusion press – 2200 MT Mfc.: Breda Danieli Built: 2016 Status: still in production Max. Extrusion Force: 21,9 MN at 300 bar Max. working pressure: 310 bar Type of press: back loading with 2 containers Billet size 8” - length: 300 – 1,200 mm Scope of supply: complete extrusion press in working order with hydraulic and electric system Overhead pinch billet manipulator Material: AL 6000 Series Out of the scope of supply: floor frame mounted in the concrete floor all dies and tooling bolsters

DIEFFENBACHER 350 T hydraulic press was built in 2006 by the German company Dieffenbacher GmbH. Technical specifications of the DIEFFENBACHER 350 T press - maximum press force: 350 t - work table dimensions (L x W): 1000 x 800 mm - maximum slider stroke: 450 mm - dimensions (L x W x H): 1650 x 755 x 3690 mm

pressure: 6 tdistance between columns: - mmstroke: - mmtotal power requirement: - kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1 x 1 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Workshop press 150 tons with electric motor and additional manual control Executions: 30t 60t 100t 150t 200t ᐳ200t: on request Special machines: on request New machine! We are also happy to build a custom press for you. High quality hydraulic workshop press with 100 tons of maximum pressing force. The press can also be moved up and down in classic electric mode by means of a lever. For fine work (e.g. press-fitting bearings, straightening, ...), the press also has a hand pump. This allows you to manually finely dose the force. The printing cylinder is attached to a transfer carriage so that the cylinder can be moved sideways. This allows you to make optimal use of the maximum upright passage width. Particularities: - 150 tons maximum pressing force - Pressure gauge with pressure gauge - 2 operating modes: electric operation or or manual operation - 2 independe ...

Workshop press 30 tons with electric motor and additional manual control Executions: 30t 60t 100t 150t 200t ᐳ200t: on request Special machines: on request New machine! We are also happy to build a custom press for you. High quality hydraulic workshop press with 100 tons of maximum pressing force. The press can also be moved up and down in classic electric mode by means of a lever. For fine work (e.g. press-fitting bearings, straightening, ...), the press also has a hand pump. This allows you to manually finely dose the force. The printing cylinder is attached to a transfer carriage so that the cylinder can be moved sideways. This allows you to make optimal use of the maximum upright passage width. Particularities: - 30 tons maximum pressing force - Pressure gauge with pressure gauge - 2 operating modes: electric operation or or manual operation - 2 independent ...

Workshop press 200 tons with electric motor and additional manual control Executions: 30t 60t 100t 150t 200t ᐳ200t: on request Special machines: on request New machine! We are also happy to build a custom press for you. High quality hydraulic workshop press with 100 tons of maximum pressing force. The press can also be moved up and down in classic electric mode by means of a lever. For fine work (e.g. press-fitting bearings, straightening, ...), the press also has a hand pump. This allows you to manually finely dose the force. The printing cylinder is attached to a transfer carriage so that the cylinder can be moved sideways. This allows you to make optimal use of the maximum upright passage width. Particularities: -automatic function - 200 tons maximum pressing force - Pressure gauge with pressure gauge - Control cabinet with motor protection monitoring and  ...

Workshop press 60 tons with electric motor and additional manual control Executions: 30t 60t 100t 150t 200t ᐳ200t: on request Special machines: on request New machine! We are also happy to build a custom press for you. High quality hydraulic workshop press with 100 tons of maximum pressing force. The press can also be moved up and down in classic electric mode by means of a lever. For fine work (e.g. press-fitting bearings, straightening, ...), the press also has a hand pump. This allows you to manually finely dose the force. The printing cylinder is attached to a transfer carriage so that the cylinder can be moved sideways. This allows you to make optimal use of the maximum upright passage width. Particularities: -automatic function - 60 tons maximum pressing force - Pressure gauge with pressure gauge - Control cabinet with motor protection monitoring and sa ...

pressure: 60 tdistance between columns: 550 mmstroke: 150 mmtotal power requirement: 11 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 3 y 3 x 2,5 mNo. 4105Hydraulic pressCompressive force max. 600 kNRam stroke 150 mmWeight approx. 4500 kgTable 500 x 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Packing: - mShipping weight: - kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7796 Type: HSA 200 T Producer: Hidroliksan Created: 2022 Parameters: Operating hours: 1600 h Compressive force: 200 t Maximum stroke: 450 mm Top table length: 1600 mm Top table width: 1400 mm Speed (high): 250 mm/s Speed (down): 160 mm/s Working speed: 5-18 mm/s Machine height: 5000 mm Machine length: 3650 mm Machine width: 3400 mm Machine weight: 18,000 kg

PRESS DESIGN  drive system: hydraulic   frame design: C-frame, single sided PRESS FORCES  total force (nominal): 12 toSLIDE  stroke: 200 mmELECTRICAL SPECIFICATIONS  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 1000 kgHour counter: 30'181 hlast safety check: 27.07.2023, overrun time 38 ms, overrun distance 60 mm

Inv. Num. : 8131 Type: HPD-S 63 Producer: Hydrap Created: 1997 Parameters: Compressive force: 63 t Stroke: 1000 mm Maximum lifting speed: 410 mm/s Machine height: 2200 mm Machine length: 1200 mm Machine width: 500 mm Machine weight: 13000 kg

Inv. Num. : 8223 Type: HPDB 400 Producer: Hydrap Created: 1989 Parameters: Compressive force: 400 t Total power requirement: 11 kW Ram stroke: 300 mm Machine weight: 32000 kg Equipment: Adjustable lower table

HYDRASAN 350 T hydraulic press was built in 2007. There are 2 such machines available for sale. Technical specifications of the HYDRASAN 350 T press - maximum press force: 350 t - lower work table surface area (L x W): 1300 x 420 mm - movable table stroke: 300 mm - distance between tables: 400 mm - approach speed: 4.8 mm/s - return speed: 5.1 mm/s - piston diameter (cylinder internal diameter): 230 mm - directional control valve: REXROTH 4WE 10 G33/CG24N9K4 - pump flow rate: 40 l/min - oil tank capacity: 120 l - hydraulic oil gauge: PAKKENS - working pressure: 230 bar - manostat: REXROTH HED 80A 20/350 - electric motor power: 5.5/11 kW - electric motor rotational speed: 1450 rpm - power supply: 380 V; 50 Hz - dimensions of the HYDRASAN machine (L x H): 1800 x 2200 mm

pressure: 63 tdistance between columns: 360 mmstroke: 400 mmweight of the machine ca.: 4 tdimensions of the machine ca.: 1.8x1.6x2.7 mwww.marcels-maschinen.chThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8013 Type: EKD 800 T Producer: Loire Created: 1977 Parameters: Compressive force: 800 t

Hydraulic Press MOSSINI 1000 ton model PO/2M 1000 table dimension 1600 x 3000 mm slide dimension 1600 x 3000 mm lower blank holder 600 ton blank holder stroke 400 mm top dead center 1280 mm upper ejectro 300 ton slide stroke 1000 mm max light 1300 mm

Hydraulic Press MULLER ZE 315 ton with new electrical system with PLC slide stroke 700 mm slide dimension 1600 x 1100 mm table dimension 1600 x 1100 mm light max 800 mm blank holder stroke 290 mm blank holder capacity 100 ton

pressure: 1200 theight of stroke: 800 mmtable-size: 1600 x 4000 mmtotal power requirement: kWweight of the machine ca.: tplus dismantling costs approx. 65.000,- €The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8016 Type: EMD-120-3.5-AL Producer: Onapres Created: 2002 Parameters: Compressive force: 120 t Table length: 4900 mm Table width: 2500 mm Stroke: 1700 mm Working speed: 8-28 mm/s Maximum workpiece weight: 50000 kg Machine weight: 175000 kg

pressure: 250 tdistance between columns: 0 mmstroke: 0 mmtotal power requirement: 0 kWweight of the machine ca.: 0 tdimensions of the machine ca.: 0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: T.C.S. Table dimension: 1200 x 760 mm Upper table dimension: 1200 x 760 mm MOVABLE LOWER CARRIAGE FOLDABLE UPPER TABLE

Pneumatic Press Manufacturer Hydraulic Powerhouse used, good fully functional condition from plant disassembly Projection: 60 mm max. height: 65 mm max. width: 65 mm Stempen Ø 40 mm Space requirement LxWxH: 650 x 120 x 250 mm

ULTRAPRAS WKR70H hydraulic press built in 2021 by the Polish company SAKOMET is designed for even the most demanding cold metal forming operations. The operations, such as precise cutting, stamping, punching and extruding of workpieces, are performed with a force of 16 tonnes using a hydraulic cylinder with a diameter of 100 mm. Induction limiters additionally allow adjustment of the piston advance and retraction limits, making the machine adaptable to the working range of various tools. In turn, centrally beneath the piston is a large cross-cut work table with a 90mm diameter bore. The UltraPras WKR 70H 16t hydraulic press weighs 420 kg. Technical specifications of the ULTRAPRAS WKR70H press - press force: 16 t - piston stroke: 70 mm - piston diameter: 100 mm - maximum working speed: 9.8 mm/s - minimum working speed: 2 mm/s - return speed: 20 mm/s - work table bore diameter: 9 ...

250t slide stroke - 500 mm

pressure: 20 tdistance between columns: 400 mmstroke: 250 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 3 1,5 2,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 tdistance between columns: 220 mmstroke: 50 mmtotal power requirement: 0 kWweight of the machine ca.: 0,17 tdimensions of the machine ca.: 0,4 x 0,5 x 1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8057 Type: PYE 160 Producer: WMW Generated: Parameters: Compressive force: 160 t Total power requirement: 7.5 kW Ram stroke: 500 mm Machine weight: 6000 kg