We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Offer 26175 Technical data: - Max. pressure capacity up to 25 t - Max. plunger stroke 160 mm - Installation height without straightening unit 675 mm - Projection to the middle of the ram 250 mm - Table size approx. 1300 x 300 mm - Working speed AB approx. to max. 30 mm/s - Working speed to approx. 100 mm/s - Oil filling quantity approx. 150 ltr - Drive 400 V / 10 kW - Space requirement approx. W 4900 x H 2400 x D 1500 mm - Weight approx. 3000 kg - with: - Straightening table extension 2030 + 1520 mm - Transfer carriage with mounts on straightening table - Lace intake - Roll recording - Directional stamp - Swivel switch with dial gauge
Single Column Press Dunkes TYPE: HZS 160 Specifications: Manufacturer: Dunkes Model: HZS 160 Operating hours: approx. 2250 The machine is in good condition and fully functional.
Directivity: 100 t Projection: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pushrod speed upwards: 206 mm/s Slide speed downwards: 68 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 3500 x 1650 x 2760 mm Weight: 5500 kg
Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t
Technical data: -maximum pressing force 40 t -maximum piston stroke 218 mm -Height 410 mm -Projection up to mid slide 280 / 370 mm -Table size 650 x 520 mm -Plunger surface 500 x 400 mm -StöÃ?elboaufnahme DIN 810 50 mm -Work speed max.bis 226kN 39 mm / s -Min. working speed 21 mm / s -Eilabsenkgeschwindigkeit 428 mm / s -Rear hub speed min. / max. 100 / 420 mm / s -Table height above floor 820 mm -Oil quantity approx. 400 ltr -Drive 400 V / 15 kW -Space requirement approx. B 1400 x H 3200 X 2200 mm -Weight approx. 7000 kg -with: - hydr. PIN voltage -Control CNC 50 - separate control panel
Crimping force at 12 bar: 8 to Pressure to 4 bar: 4 Table size 280 x 280 mm Height 350 mm RADIUS 160 mm Weight 350 kg W x D x H approx. 0.5 x 0.75 x 2,15 m -Stroke adjustment with fine Skallierung: 0.02 mm -Anti-rotation -pneumatic foot switch
Press capacity: 250 ton Throat depth: 430 mm Stroke: 300 mm Daylight: 500 mm Table surface area : 1.100 x 850 mm Slide area: 1.100 x 850 Table height over floor: 950 mm Approach speed: 330 mm / sec Working speed: 11 - 30 mm / sec Return speed: 330 mm / sec Die cushion capacity in table: 80 ton Die cushion stroke: 100 mm Ejector in ram: 5 ton Ejector stroke in ram: 75 mm Required power: 40 kW Oil volume: 1.400 l Dimensions L x W x H: 3.200 x 2.500 x 4.250 mm Weight of machine approx.: 25 ton
pressure:25 t throat:400 mm stroke:1000 mm distance table/ram, max. stroke up, adjustment up:1100 mm table surface area:620 x 620 mm Hole in the table:80 mm table height over floor:650 mm ram surface:110 mm speed down:300 mm/s speed up:500 mm/s working speed:14 - 85 mm/s oil volume:400 l power requirement:6,0 kW weight:3,8 t dimensions (WxDxH):1,5 x 2,1 x 3,9 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
pressure:160 t distance between columns:880 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:830 x 1000 mm hole in the table:265 x 365 mm table height over floor:850 mm side window:610 mm ram surface:860 x 1000 mm power requirement:55,0 kW weight:14,7 t Dimensions (WxDxH):2,2 x 2,0 x 4,3 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 depth stop:motoric adjustable table:motoric foundation pit:not necessary
pressure:100 t throat:380 mm stroke:650 mm distance table/ram, max. stroke up, adjustment up:950 mm table surface area:800 x 700 mm hole in the table:200 mm table height over floor:920 mm ram surface:630 x 600 mm speed down:65 mm/s speed up:375 mm/s working speed:17 mm/s oil volume:350 l power requirement:18,5 kW weight:9,0 t Dimensions (WxDxH):1,5 x 2,5 x 4,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 §20
pressure:200 t distance between columns:1650 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1200 mm table surface area:1600 x 1250 mm die cushion capacity:80 t die cushion stroke:300 mm die cushion area:1300 x 900 mm table height over floor:800 mm ram surface:1600 x 1250 mm oil volume:ca. 2000 l power capacity:43,0 kW weight:25,0 t Dimensions (WxDxH):2,9 x 2,3 x 5,8 m height beneath floor:0,85 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20
pressure:40 t throat:300 mm stroke:630 mm Distance table/ram, stroke up:900 mm Table surface area:620 x 520 mm Hole in the table:150 mm table height over floor:600 mm Ram surface:150 mm Power capacity:15,0 kW Weight:4,5 t Dimensions (WxDxH):1,0 x 1,9 x 3,0 m German Safety: permitted for manual loading:CE-sign
Pressing force: 1250kN, closing speed: 450mm/s, working speed: 21mm/s, stroke length: 590mm, dry weight: 15000kg. The hydraulic press has a defect in the tool holder, they must be fixated with clamping claws. Documentation available. On-site inspection is possible.
Pressure:63 t distance between columns:1000 mm stroke:300 mm Distance table/ram, max. stroke up, adjustment up:850 mm table surface area:980 x 500 mm table height above floor:850 mm ram surface:130 mm speed down:400 mm/s speed up:461 mm/s working speed:14 - 97 mm/s power requirement:15,0 kW Weight:5,0 t Dimensions (WxDxH):2,0 x 1,6 x 3,9 m depth stop:mechanical foundation pit:not necessary
pressure:6,3 t throat:170/180 mm stroke:310 mm power capacity:3 kW dayligth:775 mm weight of the machine ca.:1,5 t clamping table:470 x 330 mm table height over floor:800 mm C-Type 1 Station
pressure:160 t throat:370 mm stroke:150 mm total power requirement:45 kW weight of the machine ca.:22 t dimensions of the machine ca.:2,75 x 1,85 x x 4,80 m rules for accident prevention:Vorhanden work table::1500 x 700 mm Documents:vorhanden
pressure: 125 t distance between columns: 1050 mm stroke: 250 mm total power requirement: 40 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This Dunkes HZS 160 Bending machine was manufactured in the year 2008 and has 2250 production hours. The machine is in good condition and well maintained.
Tumbler riveting machine, double riveting machine DUNKES type DN 4 with Siemens controlMasch.. No. P 81 - 5458 Year of manufacture 1982 / 2009Rivet shank diameter max. 12 mmTool shank diameter 16 mmThroat depth 190 mmRivet head stroke per riveting unit approx. 60 mmRivet spindle speed approx. 1400 rpm. Installation height tool - counter tool max. 80 mmCompressed air requirement 6 barMotor power per riveting unit 1.1 kWNet connection 380 volts, 50 Hz rotary table with servo drive, step size programmable via Siemens PLC control system-
Stand-in hydraulic press DUNKES type HZT 2,5Masch. No. H94-2558 Year of construction 1994Compressive force 2.5 ton. Projection 180 mmTable surface 420 x 300 mmFailure opening in table 60 x 185 mmPlunger area 40 mmPin hole 20 mmPlunger stroke 160 mmInstallation height max. 250 mmRapid traverse downwards 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8.3 mm/sec. Table height above floor 950 mmHydraulic operating pressure 135 barTank capacity hydraulics approx. 100 litresDrive power
Pressing force: 250kN, max. stroke: 160mm, working speed: 30mm, connected load: 4.7kVA, weight: 2.2t.
Press capacity: 16 ton Throat depth: 250 mm Stroke: 300 mm Daylight: 600 mm Table surface area : 553 x 368 mm Approach speed: 121 mm / sec Return speed: 450 mm / sec Working speed: 45 mm / sec Required power: 7,5 kW
pressure: 100 t throat: 380 mm stroke: 400 mm power capacity: 22 kW dayligth: 600 mm ram surface: 600x500 mm table surface area: 720x600 mm weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 6 t throat: 200 mm stroke: 200 mm total power requirement: 2,2 kW weight of the machine ca.: 0,78 t dimensions of the machine ca.: - m Hydraulic Press 63 kN Stroke 200 mm, Throat 200 mm, feed rate: down 165 (28) mm/s, up 510 mm/s. Wheight 780 kg. Workspace: Table 450 x 380 Drive: 2.2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Single Stand - Hydraulic Press DUNKES Type HZT 2,5 Masch. Nr. H94-2558 Year of construction 1994 Compressive force 2,5 ton. Projection 180 mm Table surface 420 x 300 mm Diarrhoea opening in the table 60 x 185 mm Ram surface 40 mm Pine bore 20 mm Ram stroke 160 mm Installation height max. 250 mm rapid traverse Down 65 mm /sec. Rapid traverse upwards 160 mm/sec. Working speed 8.3 mm/sec. Table height above corridor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 litres Drive power 1.5 kW Mains connection 400 Volt, 50 Hz - Pressure and displacement cut-off - 2-hand operation on the machine - Stroke counter - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read operating hours Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg very good condition; used
Technical data Pressure: 1000 (12 Atü) kg Execution: 1 support Table surface: Length: 120 mm Width: 110 mm Max. distance from table to slide: 110 mm Depth of throat: 65 mm Machine´s weight about: 20 kg Overall dimensions machine: Length: 400 mm Width: 150 mm Height: 600 mm Various accessories: Micrometer stop
Capacity: 0 t Stroke: 0 mm Distance column/center (Throat): 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 1000 (12 Atü) kg Execution: 1 support Table surface: Length: 120 mm Width: 110 mm Max. distance from table to slide: 110 mm Depth of throat: 65 mm Machine´s weight about: 20 kg Overall dimensions machine: Length: 400 mm Width: 150 mm Height: 600 mm Various accessories: Micrometer stop