19 offers

Your found location: Latitude 0.0 + Longitude 0.0
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:
presses / Single Column Presses
20.10.2026
approved
dealer
item-No.: 162739748
New in: 2008

used

check
Location: Land-de

Single Column Press Dunkes TYPE: HZS 160 Specifications: Manufacturer: Dunkes Model: HZS 160 Operating hours: approx. 2250 The machine is in good condition and fully functional.

presses / Single Column Presses
11.03.2026
approved
dealer
item-No.: 162744240

new

check
Location: Land-de

For sale is a hydraulic single-column press (C-frame) with a press force of 100 t. The machine has a table size of 700 × 750 mm, a maximum installation height of 550 mm and a stroke of 400 mm, making it suitable for a wide range of pressing, assembly and forming work in industry and production. Technical data + information: Hydraulic Single Post Press – C-Frame – 100 T Allgemeine Disclosures - Type: Single column press / C-frame - Press force: 100 T - Table size: 700 x 750 mm - Max. distance plunger – table: 550 mm - Working height: 1000 mm - Overall dimensions (WxDxH): 1200 x 1150 x 2550 mm - Total weight: approx. 5,800 kg - Frame: welded steel frame - T-slots / holes: DIN 650 / 22 mm Hydraulikzylinder - Stroke: 400 mm - Piston rod Ø: 80 mm - Cylinder Ø: 140 mm - Max. working pressure: 270 bar - Replaceable crimping head: Ø 100 mm Hydraulikaggregat ...

presses / Single Column Presses
06.03.2026
approved
dealer
item-No.: 162744104
New in: 2026

new

check
Location: Land-de

For sale is a hydraulic single-column press (C-frame) from the manufacturer Durendus with an adjustable press force of up to 100 T. The machine has a table size of 800 × 600 mm, a maximum installation height of 700 mm and an adjustable stroke of up to 500 mm, making it suitable for a wide range of pressing, assembly and forming work in industry and production. The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. Here are the technical data of the offered machine: Technical data + information: Hydraulic Single Post Press – C-Frame – 100 T Allgemeine Disclosures - Title: Hydraulic Single Column Press - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 15–100 T (adjustable) - Max. installation heigh ...

presses / Single Column Presses
19.05.2026
approved
dealer
item-No.: 162747103

new

check
Location: Land-de

20T Durendus C-Stand Assembly & Small Batch Press For sale is a C-column assembly and small series press from the manufacturer DURENDUS with a maximum press force of 20 T. The machine has a table size of 700 × 920 mm, a maximum installation height of 550 mm and a stroke of 400 mm, making it suitable for assembly work, small series production, press-fit work and straightening processes in industrial use. Technical data + information: C-Stand Assembly & Small Batch Press – 20 T – 700 × 920 mm General information - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 5–20 T (adjustable) - Max. installation height: 550 mm - Table size: 700 × 920 mm - Crimping head: Ø 100 mm - Table height from the ground: 1,000 mm - Overall dimensions (WxDxH): 900 × 900 × 2,340 mm - Total weight: approx. 1,200 kg - T-slots: DIN 650 – 22 mm or accordin ...

presses / Single Column Presses
21.05.2026
approved
dealer
item-No.: 162747234

new

check
Location: Land-de

C-Press – 15 T – 300 × 300 mm For sale is a C-press from the manufacturer DURENDUS with a maximum pressing force of 15 t. The machine has a table size of 300 × 300 mm, a maximum installation height of 350 mm and a stroke of 250 mm, making it suitable for press-fit work, assembly processes and small series production in industrial use. Technical data + information: General information - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 15 T - Table size: 300 × 300 mm - Plunger plate: 300 × 300 mm - Max. installation height: 350 mm - Working height: 800 mm - Total height: approx. 2,000 mm - Total width with control cabinet: approx. 900 mm - Total depth: approx. 1,300 mm - Total weight: approx. 1,100 kg - Plunger plate guide: 2-fold Hydraulic cylinders - Stroke: 0–250 mm - Working pressure: 250 bar - Start-up speed: 17 mm/s  ...

presses / Single Column Presses
25.03.2026
approved
dealer
item-No.: 162744812

new

check
Location: Land-de

Durendus DCD-100 – Hydraulic single-column press 10–100 t – 800 × 600 mm For sale is a hydraulic single-column press (C-frame) from the manufacturer Durendus with an adjustable press force from 10 to 100 t. The machine is designed for demanding forming, deep-drawing and assembly processes and has an integrated thermoforming pad and a modern Siemens control system. Thanks to high travel speeds and precise control, it is suitable for both series production and flexible individual applications. Technical data + information: Hydraulic Single Column Press – DCD-100 General information - Manufacturer: Durendus - Model: DCD-100 - Type: C-frame / single-column press - Press force: 10–100 t (adjustable) - Total weight: approx. 6,500 kg - Overall dimensions: approx. 1,850 × 1,845 × 3,520 mm - Table height above floor: 1,000 mm Workspace - Max. distance table ...

presses / Single Column Presses
11.07.2026
approved
dealer
item-No.: 162746175

new

check
Location: Land-de

Single-column press – manufacturer Durendus – 125 t servo press – table 2200 × 750 mm For sale is a hydraulic C-frame servo press from the manufacturer Durendus with an adjustable press force of up to 125 t and an integrated 50 t ejector. Thanks to modern servo hydraulics, the machine offers significantly reduced energy consumption of up to 40% compared to conventional systems and is ideal for demanding assembly, forming and production processes. = Technical data + information: Hydraulic servo press – C-frame – 125 t General information - Manufacturer: Durendus - Model: Single column press / servo press - Type: C-frame press Laobqcjx Aqtqotxvoa - Press force: 20 – 125 t (adjustable) - Machine weight: approx. 8,700 kg - Dimensions (W × D × H): approx. 2,400 × 2,000 × 3,300 mm - Table height: 870 mm - Installation height: max. 1,000 mm Table &  ...

presses / Single Column Presses
27.10.2026
approved
dealer
item-No.: 162754580
New in: 1967

used

check
Location: Land-de

Offer 26180 Technical data: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Installation height approx. 1000 mm - Projection to the middle of the ram 520 mm - Pusher clamping surface 350 x 350 mm - Plunger clamping pin 40 mm - Table size 1000 x 1150 mm - Table opening 150 x 780 mm - Table height above floor 720 mm - Drive 400 V / 8 kW - Space requirement approx. W 1150 x H 2900 x D 2150 mm - Weight approx. 4800 kg

presses / Single Column Presses
20.10.2026
approved
dealer
item-No.: 162739749
New in: 2005

used

check
Location: Land-de

Description: Hydraulic single-column press with cycle feed Type: HEP 100 Specifications Electrical connection: 400 volts/50 Hz +/- 3 % Drive power: 5.5 kW Total power requirement: approx. 6.5 kW Control voltage: 24 volts/50 Hz +/- 3 % Hydr. Max. connection: 210 bar Set: 200 bar Performance data Ram speeds AB: approx. 48 mm/sec. at max. 100 kN compressive force Working speed AB reduced adjustable to: approx. 10 mm/sec. at max. 100 kN compressive force Ram speed ON approx. 96 mm/sec. at max. approx. 50 kN retraction force Plunger stroke: max. 200 mm Flow rate of the pump: approx. 15 l/min.

presses / Single Column Presses
11.09.2026
approved
dealer
item-No.: 162747229
New in: 1997

used

check
Location: Land-de

Offer 26149 Technical data: - Compressive force 125 t - Projection 340 mm - Table size approx. 1000 x 680 mm - Diarrhea hole in the table approx. 300 x 200 mm - Largest installation height approx. 500 mm - Tappet area approx. 600 x 300 mm - Peg hole in the tappet 50 mm - Plunger adjustability 75 mm - Stroke adjustment 20 - 180 mm - Stroke rate 80 1/min - Light barrier - Hydraulic clutch - Pneumatic dampers - Two-handed operation - Central lubrication - Separate control cabinet with control units - Pneumatic connection 6 bar - Drive 400 V / 16.5 kW - Space requirement approx. W 1700 x H 2900 x D 2700 mm - Weight approx. 9400 kg

presses / Single Column Presses
09.07.2026
item-No.: 162739573
New in: 2001

used

Location: Land-de
Price: 4.000 €

Sale due to switch to eccentric press Pressing force 100 tons Loading depth 360 mm Stroke 500 mm Daylight 800 mm Plunger area 530 x 400 mm Table height above floor 710 mm Working speed 10mm/sec Approach speed 150 mm/sec Return speed 150 mm/sec Required power 17 kW Dimensions L x W x H 1,400 x 2,000 x 3,200 mm Weight of the machine approx. 5.1 t Year of manufacture 2001 Price is net, VAT can be claimed. Loading facilities available All information without guarantee

presses / Single Column Presses
12.05.2025
item-No.: 162722671
New in: 1970

used

Location: Land-de

Offer 25020 Specifications: - Compressive force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Diarrhea hole in the table approx. 320 x 220 mm - Pushrod area 940 x 400 mm - Plunger adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg

presses / Single Column Presses
13.11.2026
approved
dealer
item-No.: 162746169
New in: 2000

used

check
Location: Land-de
Price: 4.900 €

C-frame press for clinch technology Pressing force 4.8 tons. Air pressure 6 bar, 32 mm total stroke 3 mm power stroke, no tools available

presses / Single Column Presses
12.05.2026
approved
dealer
item-No.: 162746896

used

check
Location: Land-de
Price: 1.200 €

Length 0.64 m Width 0.84 m Height 2.20 m Weight 250 kg Color: Blue Press pads Mandrels

presses / Single Column Presses
11.09.2026
approved
dealer
item-No.: 162740550
New in: 1981

used

check
Location: Land-de

Offer 25374 Specifications: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Lifting speed 25 mm/sec. - Return 125 mm/min - Installation height approx. 1000 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 530 x 400 mm - Plunger clamping pin 40 mm - Table size 750 x 560 mm - Table hole / through hole in the table 200 mm - Table height above floor 720 mm - Oil filling quantity approx. 200 ltr - Drive 400 V / 11 kW - Space requirement approx. W 1150 x H 3250 x D 1850 mm - Weight approx. 4600 kg

presses / Single Column Presses
16.09.2026
approved
dealer
item-No.: 162752146
New in: 1983

used

check
Location: Land-de

Offer 26245 Technical data: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Lifting speed 25 mm/sec. - Return 125 mm/min - Installation height approx. 800 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 530 x 400 mm - Plunger clamping pin 40 mm - Table size 750 x 560 mm - Table hole / through hole in the table 200 mm - Table height above floor 720 mm - Oil capacity approx. 200 ltr - Drive 400 V / 11 kW - Space requirement approx. W 1150 x H 2980 x D 1850 mm - Weight approx. 4600 kg

presses / Single Column Presses
10.11.2026
approved
dealer
item-No.: 162749580
New in: 1986

used

check
Location: Land-de

Offer 26185 Technical data: - Max. pressing force 160 t - Max. ram stroke approx. 500 mm - Average working speed approx. 92 mm/s - Return speed 125 mm/s - Installation height approx. 1000 mm - Projection to the middle of the ram 360 mm - Plunger clamping pin 40 mm - Table size 900 x 630 mm - Table bore / breakthrough 220 mm - Table height above floor 720 mm - Oil filling quantity approx. 200 ltr - Drive 400 V / 17 kW - Space requirement approx. W 1150 x H 3400 x D 1850 mm - Weight approx. 7500 kg

presses / Single Column Presses
23.04.2025
item-No.: 162714209
New in: 1988

used

Location: Land-de

Offer 24591 Specifications: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 0 - 40 mm/s - Return 0 - 200 m/min - Installation height 800 mm - Projection to the middle of the ram 360 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table height above floor 710 mm - Thermoforming force 10 t - Largest deep-drawing depth 160 mm - Drive 400 V / 4 kW - Space requirement approx. W 800 x H 2720 x D 1150 mm - Weight approx. 2500 kg

presses / Single Column Presses
11.09.2026
approved
dealer
item-No.: 162746095
New in: 1984

used

check
Location: Land-de

Offer 25272 Technical data: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 0 - 2.4 m/min - Return 0 - 12 m/min - Installation height 800 mm - Projection to the middle of the ram 360 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table bore / breakthrough 180 mm - E. footswitch - 2 hand control panel - Drive 400 V / 8.75 kW - Space requirement approx. W 800 x H 2750 x D 1150 mm - Weight approx. 2000 kg

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996