used EHT for sale

Ref.Nr. 00878 Name of the system: Used EHT Press Brakes Tools Manufacturer: EHT Model Year of construction Multiple pallets full of press brake tools This also includes an expensive guide rail that was never used The tools are left over from an EHT press brake, Trumabend S135-30 built in 2006 with a working length of 3050mm List Description EHT Tools Stamp H=240 500KN/m Punch H= 340 max 600KN/m H=340 R1 28° H= 240 R1 28° Length Quantity Quantity 250 7 6 175 2 1 Horn L 1 1 Horn R 1 0 90 2 1 85 2 2 80 1 1 75 0 2 70 1 2 65 0 2 60 1 2 55 1 3 50 1 2 45 1 3 40 0 1 35 1 1 30 1 2 25 1 0 20 1 1 15  ...

With autom. Stacking and transport table, light barrier, cutting counter, with scrap diverter, compressed air required Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 6000 mm Sheet thickness steel: l 4.0 mm Sheet thickness aluminium: 6.0 mm Sheet thickness front: 2.0 mm Colour: grey Total power requirement: 11 kw/63 A Machine weight: 19,500 kg Dimensions: 6800 x 3500 x 2300 mm without cutting gap adjustment Hydraulic hold-down device Brpmi77K7Oq Column projection: 200 mm Cutting angle adjustment fixed: 1 degree Back gauge: 10 - 1000 mm Machine number: 107640

CNC Punching Press Manufacturer: EHT Type: Strippit 1500/30 Year of Make: 2000 CNC Control: Fanuc Working area without replacement: 2500 x 1500 mm Material thickness max.: 8 mm Punching force: 30 tons. Turret with 46 tool positions, including 4 index stations size D 3 programmable claws Metal table Used exclusively in single-shift operation incl. tools WILSON TOOL

Guillotine Shear EHT TSs 4 40 Year of construction 1992 Working length 4000 mm Thickness 4 mm

EHT EHPS 11-45 Bauj. 1992 CNC bending machine 4550 mm 1100 Kn Cybelec control system with retrofitted safety system

Max. cutting length: 6075 mm Max. sheet thickness: 4 mm steel Controlled backgauge up to 1000 mm Light barrier Sheet metal hold-up Few operating hours Machine is loaded freely

with controlled axes: Y1, Y2, X, Z1, Z2, R pneumatic die adjustment Motor crowning Projection: 350 mm Stand width: 2550 mm Drive power: 18.5 kW Plunger stroke: 260 mm Weight:11000 kg Accessories: 2 support arms, tools: pointed punch with replacement blade: 5 x 250 mm, 1 x 175 mm block die: 6 x 515 mm, V11, V16, push-down groove 6.5 mm, V 11 groove on 300 mm defective 1x 615 mm, V 11, V16, push-down groove 6.5 mm, V6, V23, V42, V16 Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out.

sheet width: 3100 mm plate thickness: 13 mm distance between columns: / mm total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

fabric-no.: 202 395 working length: 2550 mm output: 2000 KN tracking travel: 13 mm safety distance: 176 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 6 mm weight: 7000 kg Equipment/accessories: - adjustable support table - Sheet support - angle stop - Sheet support arms - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 4 mm weight of the machine ca.: 4800 kg dimensions of the machine ca.: 3900x2100x1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

press capacity: 2250 kN quantity of oil: 400 l : DNC 1200PS Eco/Col weight of the machine ca.: ca. 15.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3550 mm column arm: 350 mm stroke of ram - hydraulic: 220 mm voltage: 380 V frequency: 50 Hz rated current: 43 A : 63 A control voltage: 220/240 kW control: DNC 80 weight of the machine ca.: 14500 kg dimensions of the machine ca.: 4830x2100x3220 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t chamfer lenght: 3550 mm distance between columns: 3050 mm Control: Cybelec DNC 880S stroke: 700 mm throat: 350 mm dimensions: 4400x2200x3940 mm weight of the machine ca.: 15.000 kg Accessories/equipment: - Bending aid in front of the machine - Parking space for bending aid - 3 stop fingers - Control conversion 2011 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible.

An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible.

Manufacturer: EHT Model: EHPS15-45 Type of Machine : Hydraulic Press Brake Year of Manufacture: 1992 Capacity: 1,500 kN Working Length: 4,550 mm Control System: CE Type DNC:94PS-b Find more here - / Contact us at -

This EHT EHPS 20-35 Press brake was manufactured in 1991. Ideal for various pressing applications, it offers robust construction and reliable performance. Contact us for more information.

This EHT Ecopress 80 press brake was manufactured in 1997. It features a pressing force of 800 kN and a working length of 2550 mm. The main motor power is 7.5 kW, and it operates with a control type DNC84PS. Consider the opportunity to buy this EHT Ecopress 80 press brake. Contact us for more information about this machine.

This 5-axis EHT Ecopress 135-30 press brake was manufactured in 2000. Consider the opportunity to buy this EHT Ecopress 135-30 press brake. Contact us for more information.

This EHT EHPS 15-40 Press brake was manufactured in 1989. It is a robust and reliable piece of equipment, ideal for various pressing applications in industrial settings. Consider the opportunity to buy this EHT EHPS 15-40 Press brake. Contact us for more information.

sheet width:3050 mm plate thickness:4 mm total power requirement:9 kW weight of the machine ca.:6 t dimensions of the machine ca.:3900 x H 1850 x T 2100 mm

sheet width: 4000 mm plate thickness: 4 mm distance between columns: -- mm total power requirement: 7,5 kW down holder: 18 Stück weight of the machine ca.: 9000 kg dimensions of the machine ca.: 4800 x 2200 x 1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6075 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Light barrier Sheet metal holding Low operating hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: . mm cutting capacity: 5050 mm weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.