used DURMA for sale

DURMA AD-SERVO 30175 CNC hydraulic press brake was built in 2016 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. This highly efficient machine is an effective answer to the daily challenges of modern business. The state-of-the-art technology used in it makes it more precise and energy-efficient than other presses on the market. The stress-relieved steel design, combined with economical drives, guarantees excellent bending results, even during the most intensive machining. All this is complemented by the intelligent CYBELEC CNC control with its intuitive interface. The DURMA AD-S 30175 CNC press brake weighs 11500 kg. Technical specifications of the DURMA AD-SERVO 30175 press brake - CNC controller: CYBELEC ModEva 15T - maximum press force: 175 t - maximum sheet metal length: 3050 mm - slider stroke: 265 mm - maximum weight of upper tool: 11 kg - maximum weight of bottom ...

DURMA MS 2504 mechanical guillotine shears were built in 2014 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, designed for precision cutting of workpieces with a maximum thickness of 4 mm, offers high reliability, precision and efficiency. Sheets made of among others stainless steel, copper or aluminium, are machined using high-quality cutting knives with adjustable gap between blades. Daily operation of the machine, on the other hand, is facilitated by the convenient foot switch and intuitive NC control. The DURMA guillotine shears weight 3230 kg. Technical specifications of the DURMA MS 2504 guillotine shears - NC control - maximum sheet metal length: 2550 mm - maximum sheet metal thickness: 4 mm - cutting angle: 1°30′ - number of strokes: 42/min - back stop stroke: 1000 mm - foot switch control - motor power: 7.5 kW - power supply: 3x 400 V; 50 Hz  ...

DURMA VN 2006 hydraulic corner notching machine was built in 2016. The machine, equipped with state-of-the-art solutions and reliable components, is designed for machining workpieces made of plain and alloy steel with a maximum thickness of 6 mm. The machining process is performed on a robust, machined table with T-slots for fast and accurate tool positioning. Thanks to the automatic adjustment of the blade, high quality of material notching is achieved with the correct gradation and straightness of the cutting edge. The cutting angle is adjustable from 30° to 140° using knobs located on both sides of the machine. The three upper and four lower hydraulic cylinders in turn ensure that accurate and repeatable notching is achieved. The VN 2006 corner notching machine weighs 950 kg. Technical specifications of the DURMA VN 2006 corner notching machine - maximum workpiece thickness (60� ...

Hydraulic bending roll. Capacity: 3100x15/18mm

Cutting lenght 6000 mm Cutting thickness 13 mm

3100x6 mm control system DT 7

320t cnc pressbrake, L: 3m stroke 365mm

pressure: 80 t throat: 515 mm connected load: 11,0 kW stroke: 70 mm : 640 x 550 mm no. of strokes: 38 Hub/min hole diameter in sheet thickness: mm weight of the machine ca.: 1,95 t dimensions of the machine ca.: 1,6 x 1,55 x 1,9 m ith a wide range of accessories See pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2550 mm plate thickness: 4 mm total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4000 mm plate thickness: 6 mm stroke: 165 mm no. of strokes: 10-28 Hub/min total power requirement: 11 kW weight: ca. 9000 kg Overall size: 5150x2200x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 200 t Folding length: 4100 mm CNC Brand: Cybelec CNC Model: DNC 80 Make Durma 200 T Type HAP 40 200 Year 2001 Durma kantbank plooibank abkantpresse Cybelec DNC 80 Capacity (metric tons)Force = 200 T Folding length (mm)L = 4.100 Down stroke or  Up stroke Crowning hand Tandem type CNC Cybelec DNC 80 UKB tool systemY1 / Y2 / X / R / Z Hand Large tooling package Troath = 350  

CNC press brake Type: AD-S 1260 Manufacturer: Durma Year: 2017 Total hours: 2886 Number of strokes: 424005 Pressing force: 60 t Maximum bending length: 1200 mm Stroke: 265 mm Power: 7.5 kW Machine weight: 4700 kg Dimensions: 2500x2300x2900 mm Two separate rear stop inches Machine in good condition, under power Find more here - / Contact us at -

Almost brand new guillotine shears maximum pressing force: 210 KG/ cm2 Power: 15 KW Find more here - / Contact us at -

This Durma TPL93 turret punch press was manufactured in 2019. Its a robust choice for precision punching operations. Consider the opportunity to buy this Durma TPL93 turret punch press. Contact us for more information.

This DURMA HD-F 3015 Fiber laser cutting machine was manufactured in the year 2015 in Turkey. Contact us anytime for further questions.

This 3-axis Durma IW 80/150 BTD Punching and Bending Machine was manufactured in 2022. It features a stroke of 70 mm and can perform up to 38 strokes per minute. With dimensions of 1000mm width, 2300mm length, and 2090mm height, it weighs 2510 kg. If you are looking to get high-quality punching and bending capabilities, consider the Durma IW 80/150 BTD machine we have for sale. Contact us for more information about this machine.

Fiber Laser, Fiber Laser Cutting Machine with Flatbed and Tube LaserLaser Cutting Machine, Laser Cutting Machine, Laser MachineManufacturer DURMATtype HD-F III 3015 III BH-IPG 2kWSeries No. 822817712 Year 2017with IPG Laser SourceSIEMENS SL 840D + CAD Software + Nesting SoftwareWorking Area 3000 x 1500 mmTube Cutting Device up to 400 mmLaser Power: 2000 Watts (Fiber Laser)Output Power: 0.2..2 kWWelle Length: 1070..1080 nmIPG Power Requirement: 6.4 kW/Hour- Polarization random-

pressure: 160 t chamfer lenght: 3550 mm stroke: 200 mm quantity of oil: 150 l weight of the machine ca.: 11400 kg dimensions of the machine ca.: 4700x2100x2700 mm Equipment: - controlled axes Y1, Y2, X, R - motorized crowning - foot switch - Delem DA65 control unit - 2x man. stop fingers - Amada /Promecam tool holder Youtube-Video-Link: https://www.youtube.com/watch?v=LQsA6jJzaI4&ab_channel=BaestleinGmbH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 4 mm cutting angle: 1° 30` ° back stop - adjustable: 750 mm weight of the machine ca.: 3800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.