used DUNKES for sale

Directivity: 100 t Projection: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pushrod speed upwards: 206 mm/s Slide speed downwards: 68 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 3500 x 1650 x 2760 mm Weight: 5500 kg

Fast Runner - Force: 75 kN - Stroke: 150 mm - Installation height: 500 mm - Projection: 330 mm - Express lowering speed: 400 mm/s - Working speed from partial load: 40 mm/s - Working speed at full load: 18 mm/s - Return stroke speed: 400 mm/s - Drive power: 22 kW - Diarrhea hole in the table: 250 x 180 mm - Breakthrough press frame to the rear: 300 x 200 mm - Table height above floor: 820 mm - Dimensions LxWxH: 1600 x 1500 x 3000 mm - Weight: 8,900 kg

pressure: 100 t throat: 380 mm stroke: 400 mm power capacity: 22 kW dayligth: 600 mm ram surface: 600x500 mm table surface area: 720x600 mm weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t distance between columns: 1050 mm stroke: 250 mm total power requirement: 40 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing force: 250kN, max. stroke: 160mm, working speed: 30mm, connected load: 4.7kVA, weight: 2.2t.

Pressing force: 1250kN, closing speed: 450mm/s, working speed: 21mm/s, stroke length: 590mm, dry weight: 15000kg. The hydraulic press has a defect in the tool holder, they must be fixated with clamping claws. Documentation available. On-site inspection is possible.

Press capacity: 250 ton Throat depth: 430 mm Stroke: 300 mm Daylight: 500 mm Table surface area : 1.100 x 850 mm Slide area: 1.100 x 850 Table height over floor: 950 mm Approach speed: 330 mm / sec Working speed: 11 - 30 mm / sec Return speed: 330 mm / sec Die cushion capacity in table: 80 ton Die cushion stroke: 100 mm Ejector in ram: 5 ton Ejector stroke in ram: 75 mm Required power: 40 kW Oil volume: 1.400 l Dimensions L x W x H: 3.200 x 2.500 x 4.250 mm Weight of machine approx.: 25 ton

Press capacity: 16 ton Throat depth: 250 mm Stroke: 300 mm Daylight: 600 mm Table surface area : 553 x 368 mm Approach speed: 121 mm / sec Return speed: 450 mm / sec Working speed: 45 mm / sec Required power: 7,5 kW

This Dunkes HZS 160 Bending machine was manufactured in the year 2008 and has 2250 production hours. The machine is in good condition and well maintained.

pressure:25 t throat:400 mm stroke:1000 mm distance table/ram, max. stroke up, adjustment up:1100 mm table surface area:620 x 620 mm Hole in the table:80 mm table height over floor:650 mm ram surface:110 mm speed down:300 mm/s speed up:500 mm/s working speed:14 - 85 mm/s oil volume:400 l power requirement:6,0 kW weight:3,8 t dimensions (WxDxH):1,5 x 2,1 x 3,9 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

pressure:160 t distance between columns:880 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:830 x 1000 mm hole in the table:265 x 365 mm table height over floor:850 mm side window:610 mm ram surface:860 x 1000 mm power requirement:55,0 kW weight:14,7 t Dimensions (WxDxH):2,2 x 2,0 x 4,3 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 depth stop:motoric adjustable table:motoric foundation pit:not necessary

pressure:100 t throat:380 mm stroke:650 mm distance table/ram, max. stroke up, adjustment up:950 mm table surface area:800 x 700 mm hole in the table:200 mm table height over floor:920 mm ram surface:630 x 600 mm speed down:65 mm/s speed up:375 mm/s working speed:17 mm/s oil volume:350 l power requirement:18,5 kW weight:9,0 t Dimensions (WxDxH):1,5 x 2,5 x 4,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 §20

pressure:200 t distance between columns:1650 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1200 mm table surface area:1600 x 1250 mm die cushion capacity:80 t die cushion stroke:300 mm die cushion area:1300 x 900 mm table height over floor:800 mm ram surface:1600 x 1250 mm oil volume:ca. 2000 l power capacity:43,0 kW weight:25,0 t Dimensions (WxDxH):2,9 x 2,3 x 5,8 m height beneath floor:0,85 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20

pressure:40 t throat:300 mm stroke:630 mm Distance table/ram, stroke up:900 mm Table surface area:620 x 520 mm Hole in the table:150 mm table height over floor:600 mm Ram surface:150 mm Power capacity:15,0 kW Weight:4,5 t Dimensions (WxDxH):1,0 x 1,9 x 3,0 m German Safety: permitted for manual loading:CE-sign

Pressure:63 t distance between columns:1000 mm stroke:300 mm Distance table/ram, max. stroke up, adjustment up:850 mm table surface area:980 x 500 mm table height above floor:850 mm ram surface:130 mm speed down:400 mm/s speed up:461 mm/s working speed:14 - 97 mm/s power requirement:15,0 kW Weight:5,0 t Dimensions (WxDxH):2,0 x 1,6 x 3,9 m depth stop:mechanical foundation pit:not necessary

pressure:160 t throat:370 mm stroke:150 mm total power requirement:45 kW weight of the machine ca.:22 t dimensions of the machine ca.:2,75 x 1,85 x x 4,80 m rules for accident prevention:Vorhanden work table::1500 x 700 mm Documents:vorhanden

pressure:6,3 t throat:170/180 mm stroke:310 mm power capacity:3 kW dayligth:775 mm weight of the machine ca.:1,5 t clamping table:470 x 330 mm table height over floor:800 mm C-Type 1 Station

pressure:2,5 t

Tumbler riveting machine, double riveting machine DUNKES type DN 4 with Siemens controlMasch.. No. P 81 - 5458 Year of manufacture 1982 / 2009Rivet shank diameter max. 12 mmTool shank diameter 16 mmThroat depth 190 mmRivet head stroke per riveting unit approx. 60 mmRivet spindle speed approx. 1400 rpm. Installation height tool - counter tool max. 80 mmCompressed air requirement 6 barMotor power per riveting unit 1.1 kWNet connection 380 volts, 50 Hz rotary table with servo drive, step size programmable via Siemens PLC control system-

Stand-in hydraulic press DUNKES type HZT 2,5Masch. No. H94-2558 Year of construction 1994Compressive force 2.5 ton. Projection 180 mmTable surface 420 x 300 mmFailure opening in table 60 x 185 mmPlunger area 40 mmPin hole 20 mmPlunger stroke 160 mmInstallation height max. 250 mmRapid traverse downwards 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8.3 mm/sec. Table height above floor 950 mmHydraulic operating pressure 135 barTank capacity hydraulics approx. 100 litresDrive power

pressure: 6 t throat: 200 mm stroke: 200 mm total power requirement: 2,2 kW weight of the machine ca.: 0,78 t dimensions of the machine ca.: - m Hydraulic Press 63 kN Stroke 200 mm, Throat 200 mm, feed rate: down 165 (28) mm/s, up 510 mm/s. Wheight 780 kg. Workspace: Table 450 x 380 Drive: 2.2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.