used Multi-compartment shelves for sale

Agilent 1260 Infinity LC System PRICE: 23,000 EUR (plus VAT) GWL: 3 months - Top condition ! - Top maintained and checked by a specialist company. - Works perfectly. - Very well maintained. Usual slight signs of wear, see photos. Manufacturer: Agilent Technologies Delivery and installation with instruction possible at an additional cost. Service, maintenance, spare parts, support, repair, modifications, training and method development are available from us at any time on request in addition to favorable conditions. Scope of delivery: --------------- - 1260 Infinity Quat Pump G1311 (Quaternary Pump) - 1260 Infinity ALS G1329B (Standard Autosampler) - 1290 Infinity G1330B Thermostat - 1260 Infinity TCC G1316A (Thermostatted Column Compartment) - 1260 Infinity DAD G4212B (Diode Array Detector) - Solvent tray - Control module - Connecting cables, hoses and co ...

Hydraulic CNC press brake Amada type HFT 170-4 L, 400 V, 16.5 kW, Weight 14,600 kg, Shelves with accessories

Tool cabinet for press brakeGood for AMADA / PROMECAM or Type AL / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg-extendable drawers, allowing access from both sides of the tools-any height adjustment of shelves-sturdy steel constructionFork-lateral guide rails for transporting by forklift (cavity under the cabinet)-The drawers run on Rollengleitschienen (serve as additional stabilization), the cabinet can be broken- Number of drawers: 4 pieces- Dimensions of a drawer:- 1200mm Overall height / Overall width 850mm / 1050mm Overall depth- Dimensions of the compartments in a drawer:- Fachhhoehe set to 210mm (is varriabel)- Total compartment height 990mm shelves available ohnen- Usable shelf width 130mm- Usable shelf depth 980mm- Number of shelves: 3 piece

Tool cabinet for press brakeGood for AMADA / PROMECAM or Type AL / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg-extendable drawers, allowing access from both sides of the tools-any height adjustment of shelves-sturdy steel constructionFork-lateral guide rails for transporting by forklift (cavity under the cabinet)-The drawers run on Rollengleitschienen (serve as additional stabilization), the cabinet can be broken- Number of drawers: 4 pieces- Dimensions of a drawer:- 1200mm Overall height / Overall width 850mm / 1050mm Overall depth- Dimensions of the compartments in a drawer:- Fachhhoehe set to 210mm (is varriabel)- Total compartment height 990mm shelves available ohnen- Usable shelf width 130mm- Usable shelf depth 980mm- Number of shelves: 3 piece

Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous; ready for operation

The Boekel Scientific economy gravity convection digital incubator is perfect for incubating cultures, test kits, and many other research and medical procedures that require heating at an economy price. This unit includes two shelves and accommodates up to four shelves as well as digital temperature readout with control dial. Great for lab benchtop's with limited space. Features LCD temperature display Analog Dial Control Heating pilot light indicates when heater is on Small footprint Magnetic latch  Includes 2 shelves Applications Pharmacy use Warm packs for phlebotomy Drinking water testing Water quality testing Incubating assays Throat cultures Incubating E. coli Broth incubation Incubating petrifilm Heating histology slides Food sample testing Incubating petri dishes W x D x H (cm) int. 29.2 x 30.5 x 26.7 Temperature Range Ambient +5°C  ...

Model: C746 No. Of Shelves: 4 Dimension cm: 62x100 Loading surface sq. M: 3,7 Distance between Shelves mm :120 Min temp. Of Condenser ºC : -70 Condensing nominal capacity KG :74 No. Of Trays 310x480x40mm: 24 Trays 300x600x40 mm Overall Dimensions Width A mm: 900 Depth B mm: 2600 Height H mm : 2000 Electric Control Cabinet Width A mm : 770 Depth B mm : 550 Height H mm : 1920 -Specifications are not binding- Refrigeraton Units : dimension according to plant location Power KW (approx) : 25 Total weight Kg : 2900 Ampuls Ø 13: 21.120 Ø 22: 7.440

DORNIEDEN DO 35 GF automatic sheet metal storage system was built in 1994. This versatile, fully automatic machine allows the storage of various types of sheet metal on 35 shelves with a maximum load capacity of 3000 kg each. The stored materials are transported between the inner structure and the unloading area and vice versa by means of a lift. In addition to quick access to the sheets at any stage of production, the machine brings a number of other benefits, such as space savings and permanent inventory control. This is why the DORNIEDEN automatic sheet metal storage system is the perfect solution for optimising production processes and storing materials. Technical parameters of the DORNIEDEN DO 35 GF sheet metal storage system - number of shelves: 35 - maximum permissible sheet stack height per shelf: 31 x 95 mm + 4 x 135 mm - maximum load capacity of a single shelf: 3000 kg - ...

Used freeze drying lyophiliser made by Edwards. Used freeze drying unit with 8,4/6,72/5,04 m2 total shelf-surface for drying product in flasks 55 mm diameter and 100 mm hight. Technic based on the plant 5,04m2. 10/8/9/6 shelves 800x1050mm and one radiation shelf, shelf interdistances 75/94/125 mm. Shelf temperature -50/-48 C /+70 C. Ice capacity 100 kg. Ice condenser temperature -75 C. Chamber and ice condenser in details made of stainless steel 1.4541 / AISI 321. Two refrigeration system with two stage compressors and watercolled freon condenser, compressors DWM-Copeland, freon R502.

Description Brand Electra Model V-09 ID 30071 Status Active Price 1.200 € + VAT Year of manufacture 2010 Location Oradea (RO) Display refrigerator Electra V-09 manufactured in 2010. Brut volume: 580 l, display volume: 380 l, compartment volume: 200 l. Refrigerant: R134a (0.600 kg), compressor: Aspera, 450 W, 220 V / 50 Hz. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

LHS Lagertechnik, supplier of new and used storage technology. We provide you with racking systems, industrial trucks, accessories and other warehouse inventory. In this ad, you will buy as follows: - 1 piece of Europe Racking 2-storey shelving system - System: Multisystem / plug-in system with pre-assembled frame - Condition: very good condition - Footprint: 13 x 12 meters (changeable) - Upper floor: completely continuous chipboard covering 38 mm (can also be used as a mezzanine without shelves) - Total: 250 shelf meters - Frame height: 2,500 mm each - Shelf meters basement: 134 meters - Shelf meters upper floor: 127 meters - Per shelf panel: 7 pieces of galvanized shelves - Shelf load: 100 kg per shelf -At call Self-collectors are welcome, free loading is offered. Shipping can be organized nationwide; please inquire about your tran ...

brochure system Manufacturer: FKS Model: Duplo 5000 year: 2008 Counter total: 780656 2x FKS/ Duplo gathering machine DC-10-60 1x transfer unit LUL-HM including dowry compartment and manual system/ -insert 1x FKS/ Duplo bridge between the towers 1x FKS/ Duplo brochure machine DBM-500 1x FKS/ Duplo front trimmer DBM-500 T 1x FKS/ Duplo long tape delivery DBM 500 LS 1x blown air support for stitching station 2x ring eyelet stitching heads 1x DBM-500 P booklet repress unit 1x short cover kit 1x FKS/ Duplo pallet lowering table STR (right display) Price: on request

FUJI KING DEBARKERS CAPACITY 200t/h ( one double section 60 t/h) USED EQUIPMENT, DISASSEMBLED, WASHED, LOADED ON TRUCKS AND CONSOLIDATED IN CONTAINER. MODEL KD6/50DT (EACH DEBARKER) YEAR OF MANUFACTURE 1995 TECHNICAL SPECIFICATIONS OF EACH EQUIPMENT: • TWO (2) DOUBLE ROTOR SECTIONS EACH. • SECTION LENGTH OF 7.65 mt (25') • TOTAL LENGTH OF 15.3 mt (50´) • WIDTH OF THE INTERIOR COMPARTMENT OF PIECES OF 2.4 mt. • MAIN ROTORS DIAMETER 0.9 mt. (36”) x LENGTH 7 m (23’) • POWER SYSTEM: 2 ENGINES 575 V 60 Hz 100 HP CONNECTED TO THE REDUCER MOTOR AND DRIVING THROUGH CHAIN. • VARIABLE SPEED FROM 16 TO 50 RPM. • DISCHARGE DRIVEN BY VERTICAL CHAIN AND MOTOR 575 V 60Hz 3HP • NET WEIGHT: 42 TONS PER SECTION - 2 SECTIONS 84 tons TOTAL. EACH KIT DOES INCLUDES: ❖ WAIST BARK BELT CONVEYOR ❖ FEED ROLLERS ❖ SUBSTRUCTURE FOR SUPPORTING FOUNDATIONS, CON ...

Manufacturer: Horizon year: January 2009 · VC 100a gathering machine with 10 compartments · Additional module VAC-100m with 10 compartments · Tandem stacking lowering table ST-60 Counters: 562,253 Price: on request

Complete Printshop package: HP DesignJet T7100PS (42 , 1067 mm) 3 roll feed plotter Printing capacity 9,490 m² see usage report HP DesignJet T7200 (42 , 1067 mm) 3 roll-fed plotter Printing capacity 74,460 m² see usage report HP DesignJet Z6800 (60 , 1520 mm) overhauled plotter Printing capacity 1,195 m² see usage report HP PageWide E77660 (50/70 ppm) with finisher (Punsh, Staples) Printer Printing capacity 258,424 (total) see consumption page HP LaserJet 4050 TN (3 trays paper feed) Printer DYMO LabelWriter 310 Printer Konica C754 (1 underfeed bin) Printer including toner (x8) € 25.00 each EFI Model: Color Profiler Spectrometer ES-1000 Spectrometer HP Sanner 4520 (42) scanner Avision AV 220 C2 A4 scanner Avision FB 2080E Scanner A3 Rowe 721-1 (folding width 96 cm) including cross folding Folding machine Prog. ...

We sell 24 x Huawei Dorado 5500 V5 series systems Systems are with controllers and shelves, but without any disks. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available co ...

We sell 1.) 2 x IBM DS8884, 2831-984 Storage Systems each consisting of 3 Frames, Dual controller 12 shelves, each 24 x 1.8TB/10k SAS Disks 2 shelves, each 24 x 3.8TB SSDs 2.) 2 x IBM V7000 Storwize, 2076-524 each with 4 controllers 22 shelves, each with 24 x 1.8 TB SAS disks 4 x IBM Storwize V5000, 2077-3122 each with 60 x 10TB NL disks 1 shelf with 12 x 10 TB NL disks 1 x IBM 2077-AF3 shelf with 24 x 1.6 TB SSD 3.) 2 x HDS VSP G1000 each consisting of 24 shelves with 1,6TB/1k SAS 32 x 10TB FMD In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems menti ...

Dimensions (HxWxD) 1290 x 1345 x 700 mm Temperature Range +2 to +10 °C Serving area 540 mm wide Display area internally illuminated Fits 10 x GN 1/4 - 150 mm deep gatronorm pans (not included) Doors: 2, Weight 137 KG Refrigerant R134A Maximum Ambient temperature 43°C High grade AISI 304 stainless steel interior and exterior One 1/1 gastronorm shelf supplied per door - 2 shelves in total Internal corners rounded for easy cleaning Adjustable legs Replaceable gaskets Pan Capacity: 10 x 1/4 GN Pans Accepts gastronorm pans up to 150mm deep (not included) Fan assisted cooling Automatic defrost Epoxy coated evaporator KIOUR controller with temp display 13 amp supply Electronic controller fitted Right handed motors Ex Works Price does not include VAT. Inspection of the machine will be scheduled at least 24 hrs in advance. We speak English. Wir sprechen Deutsch. (+ ...

Dough rounder Dough rounders are devices that are used to shape the dough They are used in the bakery and confectionery industry They can be banded and spiral The spiral rounder uses a spiral to shape the dough The machine shapes the dough thanks to the aluminum cone and aluminum sleeves around which it spirals The dough that comes from the dough compartment falls into the aluminum inlet groove All surfaces over which the dough moves are coated with Teflon Thanks to the system with flour and optional blowing of hot or cold air on the grooves, the dough does not stick to the drum Working range: 100 - 800 gr Dimensions: 950 x 950 x 1520 mm Weight: 175kg Electrical power: 1.1kW

Ultra Clean Filling Line Krones 22000 bph for CSD in PET bottles - 2010 Complete ultra clean filling line for carbonated soft drinks, cider, water made by Krones and GEA in 2010. The line has been always serviced by Krones service and thus in excellent condition. Blow moulding, rinssing, filling and capping compartment of the line is ultra clean. All these machines are connected to each other’s and they are forming a closed ultra clean compartment where bottles are transferred without conveyors from machine to machine. Filling valves are sterilized with steam and the rest with Preracetic Acid C2H4O3 solution. Process department is made by GEA and it can produce various aseptic products and other beverages. Packing department has very versatile Krones Variopac Pro for shrink, shrink tray and carton boxing and a new in year 2015 Krones Robopox palletizer. Main Characteristics M ...

Code: 0100 Brand: MASTERWOOD Model: OMS 4MM - CE Standard Chain and lock mortising machine for all types of lock housing, for wooden doors, window frames , furniture, shelves - CE Standard Aggregate with 2 horizontal milling cutters for simultaneous execution of key slot and handle hole Max depth of cut mm 150 Max length of cut mm 330 Transversal stroke mm 80 Max working height for doors mm 1000 Vertical worktable stroke mm 250 Mortising machine motor power output Kw 3 Vertical unit motor power output Kw 0,55 Horizontal unit motor power output Kw 1,84 Suction port diameter mm 120 Overall dimensions mm 1400 x 950 x 2100 h Weight kg 850

Code: 0343 Brand: ME.SA ITALY Model: GT 600 - CE Standard Chain and lock mortising machine with bits and cutters for doors, windows, shelves and various - CE Standard Technical data: Max slot length mm 300 Max slot depth mm 170 Transversal head stroke mm 100 Head tilting +/- 45 ° Max workpiece height mm 1100 Chain motor Hp 5,5 Vertical spindles motor Hp 0,5 Horizontal spindles motor Hp 2 Distance between centers (horizontal spindles) min/max mm 50/130 Transversal stroke of horizontal spindles mm 150 Overall dimensions mm 1000 x 800 x 2100 h Weight kg 600

Mol D'art Heating cabinet Model: MD60 Serial: 6 Heating cabinet, variable temp control, three shelves, internal dimensions 1450mm x 600mm x 900mm, 1Ph

Brand Myers Model C48D50B86 ID TR87 Status Active Price 200 € + VAT Location Oradea, Romania durable construction provides long product life smooth, balanced performance and efficiency adjustable on/off pressure settings. double ball bearing design and voltage choice device Maximum capacity: 27.5 GPM (model HJ1000 in Shallow Well Setup) Voltage: 230v / 115v AC, 60 Hz Engine: Dual Compartment, 115v/230v Double Ball Bearing Motor w/ Voltage Selector Switch Download offer in PDF

ORT 3RP48 CN CNC / PLC thread rolling machine scaffolding sleeves threading, shelves studs threading electronic overhaul/retrofit Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools

1 PIMATEX ready made garment dyeing machine type MTP050, year 2005, capacity up to 50 Kg, drum diameter 120 cm, drum depth 85 cm, drum volume 960 L, drum with 3 compartments, with sampling device, with 8 add vats, equipped with AREL type ATC 304+ dye cycle controller, exterior heat exchanger and pump, machine fully LENZE and ABB inverter controlled

Manufacturer: Ricoh Model: 7100 X Year: 2015 Features: 5 colors, Largfomat up to 126 cm, large compartment, Fiery Possibly. Number of prints: approx. 3 million Defects: none, as full maintenance contract Availability: by arrangement Price: on request

To review of all current equipment offers, additional foto and video you can tap to link t.me/+7GYmluf-7PlmYmYy and subscribe to the channel. ___ The vertical battery mould for forming single-layer wall precast concrete panels with a flat surface on both sides. 1. Elematic (country of original Finland) battery moulds line: 2012 year. 1. Elematic battery mould 70003100mm (for precast wall producing) for 20 compartments 2. Elematic battery 70003300 (for precast wall producing) mould for 20 compartments 3. Elematic battery mould 61003600 (for precast walls/solid floor-slab producing) for 12 compartments - Water heating (metal pipes inside metal walls) - ⁠3 vibrators per steel wall (6 per compartment) - ⁠Hydraulic compression - ⁠Mechanical movement of compartments - ⁠Outer dimensions 136008100 (for 20-comp battery) Very good condition, doesn’t need any rep ...

Used concrete block production plant Fabr. Locksmith Type : SP 3000 composed of: Stone Forming Machine Fabr. Locksmith type SP 3000 with core and attachment built in 1998 Board size 1400 x 800 mm/ 1000mm Servo Vibration System Locksmith Simatic S 7 control system Feed up to the lifting ladder Aerial ladder Fabr. Locksmith 16 tiers double butt shelf spacing 300 mm board size 1400 x 800 x 45 mm Vehicle Group Fabr. SFH without turntable with support arm adjustment Board size 1400 x 800 x 45 mm 16 floors of double shot Shelf spacing 300 / 600 mm Tuck away detection stage with measuring line Distance detection of the superstructure with measuring line Data Transmission Optical Simatic S 7 control system Drying chamber Fabr. Rotho Shelf spacing 300 mm Number of chambers 8 Chamber capacity total 4096 pcs. Dry Ladder Fabr. Locksmith 16 Shelves Double Butt Shelf Spacing 3 ...

Original Molds for SIDEL SBO 10 totally 12 sets, year 2017 JADE has 12 sets of 10+1 pc PET bottle blow molder aluminum molds for sale, all made by SIDEL France in year 2017. Molds were used in SIDEL SBO 10 blow molder with energy saving air recovery system type SIDEL AirEco. Molds are for PET bottles from 250 ml to 2.0 liters with neck standard PCO 1881 (short neck) product being still and sparkling water. This SBO 10 was operated only 16 months (with 12 sets of molds) and thus molds are in excellent condition. Delivery will include also standalone shelves for holding the moulds safely in production and two sets of stretch rods

Original Molds for SIDEL SBO 10 totally 12 sets, year 2017 JADE has 12 sets of 10+1 pc PET bottle blow molder aluminum molds for sale, all made by SIDEL France in year 2017. Molds were used in SIDEL SBO 10 blow molder with energy saving air recovery system type SIDEL AirEco. Molds are for PET bottles from 250 ml to 2.0 liters with neck standard PCO 1881 (short neck) product being still and sparkling water. This SBO 10 was operated only 16 months (with 12 sets of molds) and thus molds are in excellent condition. Delivery will include also standalone shelves for holding the moulds safely in production and two sets of stretch rods

General Manufactured by TBMA Europe BV Type Har 200 #00271200 Key Features Material Steel Engine Nord 230/380V 055 kw Inlet diameter 200 mm Specified properties – rotary lock Material Steel Rotary lock Yes Rotor with scrapers Yes Rotor diameter 250 mm Rotor width 260 mm Number of faces 8 Compartment dimensions 100 mm x 260 mm Inlet diameter 200 mm Surface dimensions Inlet flange dimensions Ø 340 stc295 8xØ24 mm Exhaust Ø200 Exhaust flange dimensions Ø340 stc 295 8x Ø24 mm Installation height 370 mm Excluding Gaskets With Motor Yes Rotor speed 13rpm External Bearings Yes With socket gasket Yes Information Total height 370 mm Weight 160 Kg Floor area 650 mm x 650 mm Additional Specification

UltiMate 3000 HPLC System - Serviced. Manufacturer: Thermo Fisher Scientific Inc. (Brand: Dionex) New price: 11,500 EUR (plus VAT) - Top condition ! - - Serviced and inspected by a specialist company. - Very well maintained. - Slight signs of use possible due to normal use, see photos. - 14-day warranty. Delivery, installation and/or instruction available at an additional cost. Spare parts available in stock. Also available from us at favourable conditions in the future: Service, maintenance, spare parts, support, method development, repairs, training. Scope of delivery: --------------- - Degasser: SRD-3400, 4 Degasser Channels - HPG-3400RS Rapid Separation Binary Pump - TCC-3000RS Rapid Separation Thermostatted Column Compartment - Diode Array Detector DAD-3000RS - WPS-3000TSL Analytical Autosampler - Chromeleon software - Chromeleon Single Edition (SE) lic ...

Code: N0555 Brand: TOMAR Model: BELLAGIO Closable double cross drying trolley for drying paints, panels, mouldings, frames, various materials Min distance between uprights mm 300 Max distance between uprights mm 2600 Length of arms per side mm 780 Useful gap between arms mm 120 N° 20 Pvc coated shelves Load capacity kg 300 N° 4 swivel wheels for handling ( 2 with locking) Handle for handling Overall dimensions: Trolley closed mm 1500 x 400 x 1900 h - Trolley max opening mm 1650 x 3000 x 1900 h Overall dimensions for transport: mm 1500 x 400 x 1900 h Weight kg 115

Code: N0200 Brand: TOMAR Model: COMO Closable double cross drying trolley for drying paints, panels, mouldings, frames, various materials Min distance between uprights mm 450 Max distance between uprights mm 3150 Length of arms per side mm 700 Useful gap between arms mm 120 N° 22 Pvc-coated shelves Load capacity kg 300 N° 4 swivel wheels for handling (2 with blocking) Handle for handling Overall dimensions: Trolley closed mm 1500 x 750 x 1900 h - Trolley max opening mm 1500 x 3350 x 1900 h Overall dimensions for transport: mm 1500 x 750 x 1900 h Weight kg 115

Used Tornado flowpack. The device produces pillow-type packaging made of flexible material (foil). The products are manually placed between the pushers of the feeding conveyor, which moves the products through the forming compartment to the sealing compartment, where the packaging material is sealed lengthwise, through sealing wheels and then transversely by sealers. An unloading conveyor located at the end of the sealing compartment transports the packaged products. Dimensions: - width 10 – 280 dm - length 100 - 500 cm - height 90 cm - capacity: 40 meters of foil per minute - power supply: 400 V 50 Hz

Complete kitchen/restaurant/gastronomy/catering/canteen equipment The set includes: 2 Viessmann chambers with dimensions 3600 x 2700 x 2450 mm 4200 x 1800 x 2450 mm (divided into 2 chambers, one of which can work as a freezer and the other as a cold store) Work tables with dimensions: 300 x 70 x 90 cm 200 x 90 x 85 cm 200 x 90 x 90 cm 120 x 70 x 85 cm 300 x 80 x 85 cm 120 x 75 x 90 cm 300 x 80 x 80 cm Sinks with dimensions: 120 x 70 x 90 cm with two sinks 50 x 50 cm 120 x 60 x 85 cm with one sink 40 x 40 cm 190 x 80 x 90 cm with one sink 50 x 40 cm 110 x 58 x 85 cm with one sink with a diameter of 25 cm Lockable cabinet with shelves dimensions: 60 x 55 x 240 cm Dishwasher dimensions 70 x 70 x 200 cm Stoves/ovens with dimensions ELOMA ELH6-1 90 x 80 x 75 cm PAULUX GXA 6-11 90 x 80 x 85 cm ENDERS 42 x 48 x 30 cm 2 pieces Induction cookers EKU C-I-7 ...

mixing device with a crusher. 500 l. Possibility to add liquid mixtures during mixing. Homologated for operation on Sk. Manual for the machine. It is available immediately. Pneumatic opening and closing of the machine lid controlled by a pedal. Safety switch for opening the engine compartment and the lid. Year of manufacture 2020

Hydraulic vulcanising press 80 t built in 2021 is distinguished by its stable construction and high press force. The hydraulic vulcanisation press for rubber is designed for the efficient processing of rubber and other thermosetting plastics using two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm. The hydraulic press achieves a capacity of 48 tonnes per month when operating in a three-shift system. Technical specifications of the rubber press - maximum press force: 80 t - electric heating - heating plate dimensions (L x W): 1200 x 1200 mm - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operating mode: manual or automatic - full technical documentation - CE certificate

Hydraulic press 80 t of stable design and high press force was manufactured in 2021. The hydraulic vulcanising press enables efficient processing of rubber and thermosetting plastics in manual or automatic mode. Excellent parameters and two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm make the hydraulic vulcanisation press for rubber ensure high efficiency of 48 tons per month during three-shift operation. Technical specifications of the rubber press - press force: 80 t - heating plate dimensions (L x W): 1200 x 1200 mm - electric heating - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operation modes: manual or automatic - full technical documentation - CE certificate

Various used blow molds in great condition Size: Up to 1 liter 1-2 compartment cavity Various used blow molds in super condition Size: Up to 1 liter 1-2 compartment cavity

1. RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction  ...

1. RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction  ...

1. RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction  ...

To review of all equipment offers, additional foto and video you can tap to link t.me/+7GYmluf-7PlmYmYy and subscribe to the channel. Weiler (Maxtruder) Turnkey Hollowcore Slabs Production Plant. Manufactured in 2008 y., never been in use, from the longtime hold in store. The plant includes: Universal extruder Weiler ux22S for the production of precast concrete hollow-core slabs (PB) 1200 × 180 mm using continuous slipform casting technology: - Universal extruder Weiler ux22S With a replaceable module for a hollow-core slab - slab width 1200 mm, height 180 mm, track width 1400 mm. 1 pc. - Automatic grippers for slabs Weiler AHZ-HP25. Loading capacity 5000 kg. 2 pcs. - Stops for tensioning reinforcement Weiler. Up to 19 ropes per stop. 10 pcs. - Mat spreader HAWKER Perfect PLUS Track width 1400 mm. 1 pc. Address delivery: - Concrete distributor for portal/semi-portal  ...

For review of all offers, additional foto and video you can tap to link t.me/+7GYmluf-7PlmYmYy and subscribe to the channel. Concrete Mixing Plant Weiler (Concrete Batching Plant). Concrete Plant Weiler (Maxtruder, Germany) – 80 m³/h, stored (never operated). Manufactured in 2008, never used. In storage. The concrete mixing plant (mortar-concrete batching plant) from the German manufacturer WEILER (MAXTRUDER) was supplied from Germany and has never been used. It includes the following components: Planetary counter-current mixer with a loading capacity of up to 2.25 m³ (dimensions 3.1 × 1.75 m); discharge capacity for heavy concrete is 1.5 m³. Mixing time: 1 minute. Motor power: 75 kW. Discharge via two sectoral compartments. - Skip for feeding aggregates, 12 m. - Cement dosing system. - Additives dosing system. - Additives tank. - Two WAM cement screws, each 11 m ...

TSDW-205W Semi Automatic Weighers is the perfect weighing solution for „difficult products, which need to be packaged at fixed weights for the supermarkets shelves. The TSDW-205W Semi Automatic Weighers in this series are unique to the market and fill the need for processing between manual and automatic packaging. The TSDW-205W are equipped with individual actuator units which are connected to a control computer. The principle of operation resembles that of an automatic multihead weigher. Features Semi Automatic Multihead Weighers with 12 Actuators Combination speed 20 to 25 wpm Number of weigh heads 12 Net weight for flat conveyor 150 kg Net weight for V-shape conveyor 160 kg Operating temperature 0°C to 40°C Available with flat and V-shape conveyor The main computer calculates the desired combination in a fraction of a second and activates the conveyor belt in the rel ...