used 14 for sale

Battenfeld HM 500/3400 Clamping force: 500t Year of Make: 2007 Injection weight in hp: 1937g Injection Unit .../3400 Screw diameter: 85 mm Spec. Spray pressure: 1574 bar Injection weight in hp: 1937 g L/D Screw Ratio: 22 Clamping unit 500/... Clamping force: 500 t Size of the clamping plates: 1590 x 1470 mm Clearance spar spacing: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg equipment: -1 x Air Valve -2 x core pull closing side NW 6 -Interface for robots according to EUROMAP 67 -Temperature control of the feed zone, integrated -Core pulling movement and parallel ejection by means of DFEE, auxiliary pump -Equipment package wear and corrosion protection, plasticizing unit -Potential-free contact parallel to the feeder

Battenfeld HM 500/3400 Clamping force: 500t Year of construction: 2007 Shot capacity: 1937g Injection unit .../3400 Screw diameter: 85 mm Injection pressure: 1574 bar Shot capacity: 1937 g L/D ratio: 22 Clamping unit 500/... Clamping force: 500 t Plate size: 1590 x 1470 mm Distance between tie bars: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg Equipment: -1 x air valve -2 x core pull on the closing side, NW 6 -Interface for robot according to EUROMAP 67 -Integrated temperature control for the feed zone -Core pull movement and parallel ejection via DFEE auxiliary pump -Wear- and corrosion-protected plasticizing unit package -Potential-free contact parallel to the dosing unit

Mazak VTC 300C-ll CNC Vertical Travel Stator Machining Center CNC control Mazatrol PC Fusion 640 M Table size 2000 x 760 mm Table load 1400 kg Number of pallets: 1 x X-axis travel 1740 mm Y-axis travel 760 mm Travel Z-axis 660 mm 4e as (draaitafel) Kitagawa MR 250 Spindle holder CAT 40 Spindle speed 12,000 1/min Spindle motor 11/7.5 kW Magazine capacity 48 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Mazak PFH 5800 (10 Pallet) CNC Horizontal Machining Center CNC control Mazatrol 640M Pallet table size 500 x 500 mm Number of pallets 10 Table load 700 kg X-axis travel 730 mm Y-axis travel 730 mm Z-axis travel 740 mm Table indexing 360 x1° Spindle taper CAT 40 Spindle 12,000 1/min Spindle motor 22/15 kW Magazine capacity 80 Required footprint 9850 x 10145 mm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

CNC Vertical Travel Stator Machining Center CNC control Mazatrol 640 M Table size 2000 x 760 mm Table load 1400 kg Number of pallets: 1 x X-axis travel 1740 mm Y-axis travel 760 mm Travel Z-axis 660 mm 4e as (draaitafel) Kitagawa MR M200 (MacMini) Spindle holder CAT 40 Spindle speed 12,000 1/min Spindle motor 11/7.5 kW Magazine capacity 30 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Offer 25180 Specifications: - Bending capacity pipe at 45 kg / mm² to Ø 60 x 4 mm - Solid material up to 45 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 171 mm - Smallest inner bending radius Ri 10 mm - Drive 400 V / 4.0 kW - Space requirement approx. W 400 x H 950 x D 700 mm - Weight approx. 140 kg - with - bending angle programming 10 programs - With 9 bending angles each - Digital bend angle display + bend angle fine adjustment - E.- Footswitch Ø 26 R 82 - Bending tools Ø 12 R 35 ; Ø 14 R 36 , Ø 20 R 56 - Ø 22 R 67, 28 R 56, Ø 1/2 R67 , Ø 3/4 R xx , Ø 1 R 110,

Impregnation system – immersion system Metallerie du sud Lorrain Year of manufacture 1991 2007 blasted and coated with Sikacor 277 the inner coating is still top Impregnating agent Korasit NG 50 Impregnating mass L/W/H 14.1 x 1.2 x 1.0 m Height retracted 2.98 m Length of support frame 8.0 m suitable for 2 parcels 6 m Transport dimensions LxWxH 15.1 x 2.4 x 2.98 m Roller lifting station NEW Pump for turbulence impregnating agent Plant is still in operation

approx. 1,300 pieces, SSI Schaefer, open-fronted storage box LF 322 – approx. 345 x 209 x 200mm, plastic, 10.4 l, blue - used - : Price per unit from location (net): 4,50 € (net)! Price per piece for complete inspection: 3.50 € (net)! Minimum order quantity 1 pallet = 96 pieces Manufacturer: SSI Schaefer Type: LF 322 GZW Year of manufacture: unknown 14 pallets of 96 pcs, already wrapped • External dimensions L x W x H [mm] 345 x 209 x 200 • Width [mm] 209 • Color: Blue • Weight [kg] 0.78 • Handle: Recessed grip in the back • Height [mm]: 200 • Capacity [l]: 10.4 • Inner width [mm]: 181 • Interior height [mm]: 185 • Inner length [mm]: 291 • Internal dimensions L x W x H [mm]: 291 x 181 x 185 • Length [mm]: 343 • MaterialPolypropylene (PP) • Grooves for partition walls: Yes • Usable height in stack [mm]: 185 • Temperature ...

Machine Type: CNC Turning/Milling Center Manufacturer: Deawoo Type: Puma TT2000SY Year of Make: 2005 Operating hours 6235 h Condition: used / ready to use Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference MV-DEA-0625 DESCRIPTION We offer you a used CNC turning/milling center from the manufacturer Doosan Deawoo. Machine Type:: CNC Lathe / Turning-Milling Center Manufacturer: Doosan Daewoo Model: Puma TT2000SY Technical details Main spindle(left) / sub-spindle(right) Turning diameter over bed:800mm Turning diameter over bed slide:620mm Max. workpiece length:740mm Max. turning diameter: approx. 390mm / approx. 315mm max. weight on the spindle (incl. chuck)120kg Max. rod diameter:65mm X-travel: approx. 255mm / approx. 190mm Y-travel: 120mm (-/+60) / none Z-travel: approx. 800mm / approx. 900mm  ...

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 140 x 50 mm Truss Type: PNB0444 Agraffe: 4 HK (hooks) Clear width: approx. 3,900 mm Max. load per pair of trusses 2,300 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Note: Some of the trusses have 5-6 drill holes on the sides. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery loc ...

Compette linear unit, dismantled, max. stroke 900/1220mm, , used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company as part of a machine disassembly and is in very good condition. The photos show the linear unit mounted on a swivelling blasting table. One unit has the motor on the left, the 2nd unit has the motor on the right. The parts have already been dismantled! Complete linear unit with the following scope of delivery: - Electric motor Siemens, 1LA7096-4AA11, 1.5 KW, 1420/min, - Zimm lifting gear I=6:1, 24mm stroke/sec. - Max. stroke without carriage only with threaded nut 1220mm, - Max. stroke with slide approx. 900mm - Trapezoidal threaded spindle 1270mm, with bellows, D35mm, 6mm pitch, - Bearing block for spindle with mounting bracket - Bronze threaded nut with lu ...

Machine Type: CNC Machining Center Manufacturer: Starrag / HECKERT Type: CWK 400 Year of Make: 2005 Operating hours 32099 h Condition: used / ready to use Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference MV-HEC-0625 DESCRIPTION We offer you a used CNC machining center from the manufacturer Starrag. Technical details x-travel:625mm Y travel:650mm z-travel:650mm B/A axis: B-axis (360 x 0.001°) 100rpm Spindle speed: of 50... 10000 rpm (stepless) Control: Siemens Sinumerik 840D Table/pallet size (LxW in mm): 2 pallets 500x400mm Table/pallet alignment type:T-slots according to DIN 55201 Pallet changer / set-up station / yes / yes / Pallet change / tool change time: 8sec / 5sec Table / pallet load (in kg): 400kg Working feed range x/y/z: 1-40000mm/min Rapid traverse X/Y/Z: 40m/min Torque 100 % ...

Weight: 268 tons Overall dimensions of the machine: Height: 10960 mm Width: 14200 mm Length: 8415 mm Max. diameter of a work-piece:: 6300 mm Maximum height of the installed product: 5000 mm Max. weight of a work-piece: 125 ton Electric motors: P-112, power 125 kW, speed 330-1000-2200 rpm PMF 45.6, power 5 kW, speed 14-2800 rpm AOS2-51-4, power 8.7 kW, speed 1335 rpm AO2-31-4, power 2.2 kW, speed 1420 rpm AOS2-21-4, power 1.3 kW, speed 1300 rpm AOS2-4, power 10 kW, speed 1460 rpm

Process chiller / chiller air-cooled for duct connection Type: TAEevo Tech 101 P5-RAD Refrigeration Machines, MTA S.p.A. TAEevo Tech 101 P5-RAD are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 255 ltr. And built-in P5 high-pressure pump radial blower for duct connection (air volume flow 14200 m3/h and external delivery pressure of 134 Pa) Extras: - Speed control of the fans - Open storage tank - Bypass with socket slide Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 25.7 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 4.34 Available pump pressure (bar) 4.96 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 20 Max. ...

Process chiller / chiller air-cooled for duct connection Type: TAEevo Tech 101 P5-RAD Refrigeration Machines, MTA S.p.A. TAEevo Tech 101 P5-RAD are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 255 ltr. And built-in P5 high-pressure pump radial blower for duct connection (air volume flow 14200 m3/h and external delivery pressure of 134 Pa) Extras: - Speed control of the fans - Open storage tank - Bypass with socket slide Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 25.7 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 4.34 Available pump pressure (bar) 4.96 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 20 Max. ...

Cintex Sentry Metal detector Stainless, belt dimensions 1400mm x 290mm, aperture 400mm x 220mm, intralox belt, mobile, 3Ph

Offer 23426 Specifications: - Cutting range at 90° around 420 mm - flat 635 x 290 mm - Cutting range 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Stepless cutting speeds 18 to 108 m/min - Hydr. Raising + lowering the saw frame - Hydr. Material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine is mounted on bogie - Feed roller conveyor mot. driven 4000 mm - Discharge roller conveyor with dimension stop 6000 mm - Space requirement approx. W 2500 x H 1400 x D 1100 mm - Weight machine approx. 950 kg - Weight roller conveyors 2000 kg

Vertical baler Dixi 50 S, built in 2020, very good condition Specifications Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S PET Year of Make: 2020 Drive power: 7.5 kW Press force: 50 t Press time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Binding: manual Transport dimensions: 1800 x 2000 x 2300 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, foil, polystyrene, fleece, glass wool, etc. The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in very good, mint condition. The seals on the 2 cylinders for the retaining clamps have been replaced. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are  ...

Vertical baler Dixi 50 S, built in 2019 Specifications Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S PET Year of Make: 2019 Drive power: 7.5 kW Press force: 50 t Press time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Binding: manual Transport dimensions: 1800 x 2000 x 2300 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, foil, polystyrene, fleece, glass wool, etc. The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in very good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an ex ...

Vertical baler Dixi 50 S, built in 2019, very good condition Specifications Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S PET Year of Make: 2019 Drive power: 7.5 kW Press force: 50 t Press time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Binding: manual Transport dimensions: 1800 x 2000 x 2300 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, foil, polystyrene, fleece, glass wool, etc. The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in very good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with yo ...

Lot with approx. 495 corlettes, Cordes and Koch, width 1.30m / 2m / 2.50m - mostly with runners, mostly NOT stackable, few stackable, used - : Prices (net) per piece from location: Width 1.30m: Type 1a: Non-stackable: 65.-€ Type 1b – 1g: Non-stackable: 69.-€ Stackable: 89.-€ Width 1.95m: Type 2a + 2b non-stackable: 99.-€ Width 2m: Type 3 non-stackable: 99.-€ Width 2.50m: Type 4 non-stackable: 109.-€ Manufacturer: partly Koch partly Cordes Type: unknown Year of manufacture: unknown Payloads: 600kg When stackable: Load 600kg, stackable 3 times Mostly with skids for adjusting / storing in corlette racks Condition: good – very good Available: immediately Location: Würzburg Type 1a – approx. 81 pieces, + 1x not stackable 1.30m Low Type: mc-130.641 Net weight: 72kg Stackable 3 times Dimensions: Width: 1.28m, Depth 1.14m, Heigh ...

COMPLETE CLT PRODUCTION LINE 1. Vacuum de-stacking of timber 2. Manual marking station for timber defects 3. Reject gate for boards 4. X-CUT S200 cross-cut saw to remove timber defects 5. Infeed system to finger jointing machine 6. Eurozink COMPACT 6-300 kN finger jointing machine up to 6 pcs/min 7. Vertical conveyors to curing storage 8. Multi tray curing storage (3 levels) 9. Infeed to EUROPLAN 4V-S120 planer for laminations 10. Roll conveyor for storage of longitudinal laminations (4 layers) 11. Aligning station for longitudinal layer 12. X-CUT S200 cross-cut saw for cross layer laminations 13. Chain conveyor storage for cross layer laminations (3 layers) 14. Aligning station for cross layer 15. Vacuum layer assembly unit for Longitudinal Layer and Cross Layer 16. OEST controlled PUR (1 component polyurethane) glue application system 17. Solid fast movable PE coated  ...

Inline homogenizer Manufacturer: Higra Mix Type HG 140 Capacity: 40,000 l/h Power: approx. 30 kW Speed: 3,000 rpm Dimensions: Length 1100 x Width 450 x Height 600 cm Net weight: 220 kg Mixing chamber: diameter 185 mm Product inlet: DN 100 Product outlet: DN 80 The homogenizer is designed for the production of emulsions and suspensions with a wide range of viscosity.

Embossing press Baier GEBA 1/F, installation height 90 mm, printing capacity 800 kg, working size 10cm x 14 cm, year of construction 1973, machine number 73040, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Offer 25995 Specifications: - Pressure capacity 1600 KN / 160 t - Pressure regulation 0 - 160 t - Stroke length approx. 0 - 600 mm -Max. Installation depth with straightening beam 1050 mm -Max. Installation depth without straightening beam 1400 mm - Lifting speed approx. 0 - 0.6 m/min - Tool height approx. 400 mm - Drive 380 V / 11 kW - Space requirement approx. W 3600 x H 1400 x D 1800 mm - Weight approx. 6500 kg - Accessories - height-adjustable side support rollers - Straightening tool for straightening long material - Straightening beam 1300 x 400 mm with over - Threaded spindle laterally adjustable rebearings

Battenfeld TM 300/2250 Clamping force: 300t Year of Make: 2014 Injection weight in hp: 980g Injection Unit .../2250 Screw diameter: 65 mm Spec. Spray pressure: 2070 bar Injection volume: 1078 ccm Injection weight in hp: 980 g Hydr. Drive power: 63 kW Cylinder heating capacity: 26 kW L/D Screw Ratio: 22 Clamping Unit 300/... Clamping force: 300 t Size of the clamping plates: 1020 x 940 mm Clearance spar spacing: 630 x 630 mm Ejector force: 59 kN Tool installation height: 250...650 mm Opening travel: 600 mm Max. plate spacing: 1250 mm Ejector travel: 200 mm Total connected load: 2222 kW Fuel tank capacity: 550 l Electrical connection (fuse): 1111 A Weight: 11800 kg Dimensions(m) LxWxH: 7.0 x 1.8 x 2.4 m Year of Make: 2014

Battenfeld TM 300/2250 Clamping force: 300t Year of Make: 2014 Injection weight in hp: 980g Injection Unit .../2250 Screw diameter: 65 mm Spec. Spray pressure: 2070 bar Injection volume: 1078 ccm Injection weight in hp: 980 g Hydr. Drive power: 63 kW Cylinder heating capacity: 26 kW L/D Screw Ratio: 22 Clamping Unit 300/... Clamping force: 300 t Size of the clamping plates: 1020 x 940 mm Clearance spar spacing: 630 x 630 mm Ejector force: 59 kN Tool installation height: 250...650 mm Opening travel: 600 mm Max. plate spacing: 1250 mm Ejector travel: 200 mm Total connected load: 2222 kW Fuel tank capacity: 550 l Electrical connection (fuse): 1111 A Weight: 11800 kg Dimensions(m) LxWxH: 7.0 x 1.8 x 2.4 m Year of Make: 2014

Battenfeld HM 500/3400 Clamping force: 500t Year of Make: 2007 Injection weight in hp: 1937g Injection Unit .../3400 Screw diameter: 85 mm Spec. Spray pressure: 1574 bar Injection weight in hp: 1937 g L/D Screw Ratio: 22 Clamping unit 500/... Clamping force: 500 t Size of the clamping plates: 1590 x 1470 mm Clearance spar spacing: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg equipment: -1 x Air Valve -2 x core pull closing side NW 6 -Interface for robots according to EUROMAP 67 -Temperature control of the feed zone, integrated -Core pulling movement and parallel ejection by means of DFEE, auxiliary pump -Equipment package wear and corrosion protection, plasticizing unit -Potential-free contact parallel to the feeder

Registration date: 09/2018 KM: 114.044 165 hp (121 kW) Fuel: Diesel Gearbox Number of doors: 5 Description: ATTENTION: ONLY PARTIALLY ROADWORTHY; Engine runs smoothly and starts without any problems, but builds up pressure. Suspected cylinder head gasket damage. Loading dimensions: L=403 cm, W=184 cm, H=216 cm Information without guarantee-Error excepted, price net: 9.990,- € Price incl. VAT: 11.988,- € Information: +43 7 7 3 5 6 0 5 1 2 2 Options and accessories: Digital tachograph Air conditioning Levitation for drivers Cruise control Hinged doors with 270° opening angle Exterior mirrors electrically adjustable, heated and foldable Camera Pack Navigation system + reversing camera Parking aid acoustic incl. radio CD with Bluetooth hands-free system, touchscreen and USB port Features & Extras: ABS hands-free radio partition wall Towbar, Air Conditionin ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 101 P3-MAG MTA S.p.A. TAEevo Tech 101 P3-MAG are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 255 ltr. And built-in P3 pump. Extras: - MAG kit expansion vessel 6 litres, safety valve 3 bar - Ball valves on the water connection - Socket slide at the outlet Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 27.5 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 4.68 Available pump pressure (bar) 2.54 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 14 Max. current (A) 25 Starting Current Circuit (A) 123 Protection class: IP54 Dimensions: Length (mm) 1862, Widt ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 101 P3-MAG MTA S.p.A. TAEevo Tech 101 P3-MAG are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 255 ltr. And built-in P3 pump. Extras: - MAG kit expansion vessel 6 litres, safety valve 3 bar - Ball valves on the water connection - Socket slide at the outlet Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 27.5 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 4.68 Available pump pressure (bar) 2.54 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 14 Max. current (A) 25 Starting Current Circuit (A) 123 Protection class: IP54 Dimensions: Length (mm) 1862, Widt ...

Offer 25129 Specifications: - Abrasive diameter 150 mm - Swivel head - grinding unit swivel + swivel on the articulated arm - Dust drawer - Disc speed infinitely adjustable - Table dimensions 1400 x 980 mm - Table height approx. 870 mm - Drive 400 V / 0.75 kW - Pneumatic connection 6 bar - Space requirement approx. W 1700 x H 1700 x D 1300 mm - Weight approx. 400 kg

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

Cardboard shredder Erdwich EKZ1100, built in 2012 Specifications: Manufacturer: Erdwich Shredding Systems Type: EKZ 1100 Year of Make: 2012 Drive power: 7.5 kW Cutterbar size: 1095 x 700 mm Discharge height: 800 mm Discharge depth: 870 mm Feed height: 690 mm Feed height: 1200 mm Dimensions: 2390 x 1480 x 2265 mm (LxWxH9 Weight: 950 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.

This is a 305GTP dry steam quick cooker from the premium manufacturer Hobart from 2018. The medium-sized 305 GTP dry steam rapid oven is often used in the field of mass catering. With its 3 x 1/1 GN inserts, it cooks up to 650 portions per hour fresh and accurate to the minute. The evaporation of the water and the associated increase in volume creates an atmosphere of saturated steam in the cooking chamber of the GTP, which ensures excellent heat transfer to the food. Saturated water vapor has great advantages in terms of transferable heat flux density compared to hot air or combination steam. Shorter cooking time means less nutrient loss and healthy food. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. The RRP for this device is €28,202 net. Our used equipment service for you - 6 months warranty ...

Powered Tool Holder suitable for Mazak SQT 200 M Manufacturer: RGX- Tools Premium quality Made in Europe radial tool holder, with internal cooling 20 bar VDI 40 for Mazak Condition : new Warranty : 12 months Delivery time approx. 14 days from order Item number:RGX1-40/221-32/2.1-130MZ2 Tool holder: Collet ER 32 Internal cooling : yes ; 20 bar Height : 130 mm Max. torque : 50 Nm Compatible with the following machines Mazak ᐳ QT 200 M/MS/MY/MSY (STAR) ᐳ ALL TYPE ᐳ ALL TYPE Mazak ᐳ QT 200 M/MS/MY/MSY (STAR) ᐳ LIVE TOOLS ᐳ ANGULAR Mazak ᐳ QT 250 M/MS/MY/MSY (STAR) ᐳ ALL TYPE ᐳ ALL TYPE Mazak ᐳ QT 250 M/MS/MY/MSY (STAR) ᐳ LIVE TOOLS ᐳ ANGULAR Mazak ᐳ QTN 200 M/MS/MY/MSY (STAR) ᐳ ALL TYPE ᐳ ALL TYPE Mazak ᐳ QTN 200 M/MS/MY/MSY (STAR) ᐳ LIVE TOOLS ᐳ ANGULAR Mazak ᐳ QTN 250 M/MS/MY/MSY (STAR) ᐳ ALL TYPE ᐳ ALL TYPE Mazak ᐳ QTN 250 ...

Manufacturer : Okuma Type : LB 3000 EX MY C 1000 Control : OSP P 300 L IGF Advance Year of construction : 2014 Duty cycle hours : approx. 18500 h Spindle hours : approx. 5000 h Availability : direct from location Specifications Turning diameter over bed: 580mm Max. turning diameter: 340mm Max. Workpiece length: 950mm Travel: X: 260mm, Z: 1,000mm Y: 120mm (+70/-50mm) C-axis: 360°/0.001° Spindle speed: 4,200 rpm Drive power: 22 kW Driven tool stations : 12 positions Driven tool stations Speed: 45–6,000 rpm Tool System : BMT 60 Okuma Weight: 6,600 kg • Dimensions L xWxH: 4,300x 2,041 x 2,444 mm Other equipment Mayfran chip conveyor NC tailstock Touch Setter tool preset Hydraulic 3-jaw chuck Röhm Duro NCCB 260/3 various tool holders not defined All prices are net plus VAT. VAT We expressly reserve the  ...

500 pcs transport racks – stanchion racks – tray racks used Used goods, good condition, see photos Outer dimensions: 135x116x24cm Inner dimensions: 125x104cm Height incl. tubes: 200 cm galvanized Diameter of tubes: 50 mm Stackable on top of each other Negotiation price: € 149,- net from stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Width 72 cm Year of construction 2014 Pallet feeder FP 120 Pallet feeder with Vaculift and Vacubelt MC Control 1st station: 8 fold pockets 72 cm Downstream knife shaft 2nd station: 4 fold pockets 52 cm Downstream knife shaft Shed display partially overhauled - workshop tested - new folding rollers station 1 Machine condition: cleaned and checked Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Qty. 1 Second-hand (PUR/PIR) sandwich panel Mfc.: PIR/PUR Firing System & Profiling Press Line – Siempelkamp GmbH Terminal System – IL Kwang Metal Built: 2016 Type for sandwich panel: Outer side – Color coated steel strip Inner side – Hard Polyurethane / Polyisocyanate Use for: Construction Panel for Wall & Roof Product size: 14.0 m x 1.22 m – L x W Thickness: 50 mm, 75 mm & 100 mm Upper & lower steel strip: 1220 x 0.45 – 0.75 mm – W x T Coil weight: 10 T

Hidraulics unit Vickers Electric motor: Manufacturer: Siemens Type: 1LA7133-4AA61ZA11 8.6kW Vane Pump: Manufacturer: Parker Type: PVL32EH140C2 The unit is in good condition. see pictures for more details.

Hydraulic motor Manufacturer : Rotary Power Article: SMA 1430 C1 182 Condition : New

Geared motor Article number: FDU1702 2358249 005 2KJ3102-1DE22-2AP1-Z Z29-LE80MH4E-L16\10N IP55 50HZ - 60HZ 3.11\1.79A 1.72A 0.75KW S1 1440r\min 50HZ n2:99.0r\min 60HZ n2:120r\min 18Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1711-2398534 2KJ3102-1EK23-2HF1-Z Z29-LE80MH4E-L16\10N IP55 50HZ - 60HZ 3.11\1.79A 1.72A 1.1KW S1 1.27KWS1 1440r\min 50HZ n2:235r\min 60HZ n2:285r\min 18Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1711-2401485 2KJ3102-1EM23-2HA1-Z ZZ29-LE90ZLR4P IP55 50HZ - 60HZ 5.5\3.15 A 3.15A 1.5KW S1 1.75KWS1 1445r\min 50HZ n2:416r\min 60HZ n2:499r\min 20Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1703-2358223 2KJ3102-1FN23-2HA1-Z ZZ29-LE9100ZLSA4P-L16NH IP 55 50HZ - 60HZ 7.65\4.4A 4.35A 2.2KW S1 2.55KWS1 1465r\min 50HZ n2:419r\min 60HZ n2:507r\min 37Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1711-2401486 001 2KJ3501-6EM23-2HB1-Z BAZ29-LE90ZLR4P IP 55 50HZ - 60HZ 5.5\3.15 A 3.15A 1.5KW S1 1.75KWS1 1445r\min 50HZ n2:343r\min 60HZ n2:411r\min 22Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: 2KJ3102-1DF23-2HL1-Z FDU1703/2358250 002 ZZZ29-LE80ZMQ4P IP 55 50HZ - 60HZ 3.04A 1.68A 0.75 KW S1 0.86A 1450r\min 50HZ n2:143r\min 60HZ n2:173r\min 15Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1703-2358222 2KJ3102-1FN23-2HA1-Z ZZ29-LE9100ZLSA4P-L16NH IP 55 50HZ - 60HZ 7.65\4.4A 4.35A 2.2KW S1 2.55KWS1 1465r\min 50HZ n2:419r\min 60HZ n2:507r\min 35Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1711/2398533 020 2KJ3102-1EK23-2HF1-Z ZZZ29-LE90ZLSM4P IP 55 50HZ - 60HZ 1.1 KW S1 1440r\min 50HZ n2:235r\min 60HZ n2:285r\min 17Kg NEW and fully functional, from stock, see pictures for more details.