used 14 for sale

General -Ges. Length : approx. 20,480 mm -Ges. Width : approx. 14,328 mm - Height incl. shelf : 5,300 mm Mezzanine - Upper edge of the mezzanine floor : approx. 2,750 mm - Lower edge of mezzanine floor : approx. 2,526 mm - Aisle width main aisle : approx. 1,000 mm - Aisle width intermediate aisles : approx. 1050 mm - Load steel construction platform : 500kg/m² - Load intermediate aisles : 300 kg/m² - Flooring : 38mm chipboard , lower edge white , upper edge natural - Solid substructure - Manufacturer : META Shelving - Length : approx. 6,066 mm - Height : approx. 5,100 mm (continuous) - Width: approx. 500 mm & 600 mm - Width double row : approx. 1,075 mm & 1,175 mm - Load : 100 kg per shelf - Manufacturer : META - Type : Frame TSS , Floor V100 - Year of manufacture : 10/2020 & 5/2015 - All outposts have solid sheet metal at the bottom + top Shelving consist ...

Data: - H : approx. 400 cm - T : approx. 148 cm - L : approx. 400 cm - Cantilever arms : approx. 120 cm incl. 8 cm deflector at the front - Axial dimension: 130 cm - NEW GOODS immediately from stock. - 650 kg load per arm - 1950 kg load per stand - Stand in RAL7016. - Cantilever arms in RAL3000 - Arms are hooked. - Arms adjustable in 100 mm increments. - Levels: feet + 3 storage levels (4 storage levels) The stands from this shelf set are prepared free of charge for a possible conversion to double-sided use. Advantages of a hooked-in cantilever arm, see illustrations. Shelf consists of : - 04 x stand, incl. footboard approx. 400 cm made of IPE180. - 12 x cantilever arms approx. 120 cm from profile 10 cm x 4 cm. - Including all necessary fasteners and screws. Price: 1995,00 € Net 2374,05 € Gross You will receive an invoice with VAT. Accessories such a ...

Data: - H : approx. 400 cm - T : approx. 148 cm - L : approx. 400 cm - Cantilever arms : approx. 120 cm incl. 8 cm deflector at the front - Axial dimension: 130 cm - NEW GOODS immediately from stock. - 650 kg load per arm - 1950 kg load per stand - Stand in RAL7016. - Cantilever arms in RAL3000 - Arms are hooked. - Arms adjustable in 100 mm increments. - Levels: feet + 3 storage levels (4 storage levels) The stands from this shelf set are prepared free of charge for a possible conversion to double-sided use. Advantages of a hooked-in cantilever arm, see illustrations. Shelf consists of : - 04 x stand, incl. footboard approx. 400 cm made of IPE180. - 12 x cantilever arms approx. 120 cm from profile 10 cm x 4 cm. - Including all necessary fasteners and screws. Price: 1995,00 € Net 2374,05 € Gross You will receive an invoice with VAT. Accessories such a ...

Data: - H : approx. 820 cm - T : approx. 110 cm - L : approx. 57 m - Load: 3,000 kg shelf load - Load: 9,000 kg bay load - Stand in blue - Trusses in orange - Manufacturer : Stow - Frame : Used goods - Condition very good - Trusses : New Shelf consists of : - 021 x stand approx. 820 cm x 110 cm x 14 cm, pre-assembled. - 120 x truss approx. 270 x 13 x 5 cm. - 240 x locking pins. - Levels: Ground + 3 - 240 pallet spaces incl. floor spaces on this rack, built in a row -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 8.800,00 € Net €10,472.00 Gross You will receive an invoice with VAT. Transport: Delivery can be made by our partner forwarding company on request, the costs depend on the postcode. Assembly: If required, our trained staff will be happy to assist you in the professional assembly and dismantling of your business equipment. Our recommendat ...

Data: - H : approx. 620 cm - T : approx. 110 cm - L : approx. 28.60 m - Load: 3000 kg shelf load - Load: 9000 kg bay load - Stand in blue - Trusses in orange - Manufacturer : Stow - Frame : Used goods - Condition very good - Trusses : New Shelf consists of : - 011 x stand approx. 620 cm x 110 cm x 14 cm, pre-assembled. - 060 x truss approx. 270 x 13 x 5 cm. - 120 x locking pins. - Levels: Ground + 3 - 120 pallet spaces incl. floor spaces on this rack, set up in a row -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 4.580,00 € Net €5,450.20 Gross You will receive an invoice with VAT. Transport: Delivery can be made by our partner forwarding company on request, the costs depend on the postcode. Assembly: If required, our trained staff will be happy to assist you in the professional assembly and dismantling of your business equipment. Our recommenda ...

Data: - H : approx. 1120 cm - T : approx. 110 cm - L : approx. 102.40 m - Load: 3,000 kg shelf load - Load: 9,000 kg bay load - Stand in blue - Trusses in orange - Manufacturer : Stow - Frame : Used goods - Condition very good - Trusses : New Shelf consists of : - 037 x stand approx. 1120 cm x 110 cm x 14 cm, pre-assembled. - 288 x truss approx. 270 x 13 x 5 cm. - 576 x locking pins. - Levels: Ground + 4 - 540 pallet spaces incl. floor spaces on this rack, set up in a row -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 16.990,00 € Net 20.218,10 € Gross You will receive an invoice with VAT. Transport: Delivery can be made by our partner forwarding company on request, the costs depend on the postcode. Assembly: If required, our trained staff will be happy to assist you in the professional assembly and dismantling of your business equipment. Our re ...

Data: - H : approx. 620 cm - T : approx. 110 cm - L : approx. 57 m - Load: 3000 kg shelf load - Load: 9000 kg bay load - Stand in blue - Trusses in orange - Manufacturer : Stow - Frame : Used goods - Condition very good - Trusses : New Shelf consists of : - 021 x stand approx. 620 cm x 110 cm x 14 cm, pre-assembled. - 120 x truss approx. 270 x 13 x 5 cm. - 240 x locking pins. - Levels: Ground + 3 - 240 pallet spaces incl. floor spaces on this rack, built in a row -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 8.800,00 € Net €10,472.00 Gross You will receive an invoice with VAT. Transport: Delivery can be made by our partner forwarding company on request, the costs depend on the postcode. Assembly: If required, our trained staff will be happy to assist you in the professional assembly and dismantling of your business equipment. Our recommendatio ...

2 Cast iron V supports Width: 1400 mm Height: 1370 mm Base depth: 750 mm Slot width: 200 mm V width: 940 mm V depth: 430 mm Total height under sole: 1470 mm Weight: 2,3 T / unit

Code: 0427 Brand: ILMETECH Model: I 12 - 065 Automatic knife grinding machine for planer knives, knife blades and rectilinear tools - CE Standard Technical data: Suitable for grinding of HSS steel as well as carbide tools used in the woodworking, paper, leather, plastics, metal and food sectors Max working length mm 650 Tilting grinding motor unit Grinding wheel motor power kW 1,15 Grinding wheel external diameter mm 125 Grinding wheel feed per stroke mm 0-0,05 Two-speed carriage feed mt/min 6/12 Coolant pump capacity lt/min 0-30 Overall dimensions mm 1450 x 550 x 1300 h Weight kg 186

The iCombi Classic is the latest combi steamer from RATIONAL. The iCombi Classic 20-2/1E model is a true all-rounder and will quickly become an indispensable helper in your kitchen. It replaces many conventional cooking appliances and is robust, powerful, powerful and efficient. The device offers space for 20x2/1 or 40x1/1 GN. The combi steamer will be available from the end of week 25. The device has been tested in our in-house specialist workshop and is fully functional. Leasing possible, let us make you an offer! The RRP. is 31440 € net. You will receive an invoice with VAT. Service: We will be happy to put you in touch with a certified Rational customer service throughout Germany Are you looking for a specific Rational appliance type? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices ...

ID3574 Monsuna AKS A4 year/Baujahr 2014 Tire washing system for commercial vehicles, Monsuna type AKS A4 series, including tank, control system, signaling system, and contact loop for automatic operation. The washing zone is fully galvanized. The water supply is fully integrated into the module frame. Passage zone: 4000 mm long x 3100 mm wide (clear passage width: 2900 mm). Weight: approx. 5,000 kg (2 washing modules, each with a capacity of 2,500 kg). Tank: 7000 mm long x 3000 mm wide. Weight (unfilled) approx. 3,560 kg. Tyre washing system for commercial vehicles Monsuna type AKS A4 incl. tank, control system, signalling system and contact loop for automatic operation, the washing zone is completely galvanised, water supply is completely integrated into the module frame, passage zone: 4000 mm long x 3100 mm wide (clear clearance width: 2900 mm), weight: approx. 5,000 kg (2 wash mod ...

Code: 0141 Brand: SUPER CONDOR Model: 20/L Pillar drill for carpentry, mechanical workshop and various Technical data: Cast iron base Max diameter 20 mm Cone cm 2 Table size diameter mm 300 Swivel table with vice Motor power Hp 1 N° 10 speeds from 193 to 2280 rpm Overall dimensions mm 700 x 400 x 1600 h Weight kg 125

Technical data for the pallet racking system: Shelving system: Polypal Type: Stockpal Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 28,255 mm Number of fields per row of shelves: 09 pcs. The scope of delivery includes: 07x Pallet rack stand, used Material colour: sendzimir galvanised Type: SKMO 3720 P Profile dimensions: 85 x 63 x 2 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 4,000 mm high 1,100 mm deep 26x Pallet rack crossbar, used Material color: blue Box profile: 160 x 50 mm Type: SKVBN 1620CP 33 Clasp: 2 HK (hooks) Design: Head crossbeam Clear width: 4,610 mm Max. load per pair of trusses 2,000 kg, with the same weight. Distributed load 52x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members against uninte ...

Gallus EM 280 Year 1998 9-color flexo 13 sets of printing cylinders and 1 die-cutting cylinder each 12 anilox 75 78 82 88 92 98 102 106 110 120 126 135 144

Made in the EU 30 months warranty On hand! Only 2 pieces available Power Generator Specifications: Model No.: EQ-I10080 Prime Rating: 100 kVA / 80 kW Standby Rating: 109 kVA / 87 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: NEF45TM2A Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression Ratio: 17.5:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2430 mm Width: 1056 mm Height: 1700 mm Weight: 1422 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-coated, weld ...

table diam 1400,max turning diameter 1600 sinumeric 802 d

Code: 0140 Brand: PEGIC Model: GP 350 RT - CE Standard Crosscutting machine with suction base for cutting frames, wooden profiles, joinery, furniture, window frames, aluminium, pvc, plastics and various materials - CE Standard Technical data: Blade diameter mm 350 F 30 Revolutions per minute rpm 3000 Three-phase motor power Kw 2 Cutting capacity mm 120 x 160 Suction base GPS Motor Kw 0,75 Capacity 1200 m3/h Overall dimensions mm 850 x 650 x 1300 h Weight kg 100

Brand: Bottero Type: 131 BMK Kind: Float Cutting Table Serial Number: GG60KB-7684 Year of construction: 2001 Weight: 2.25 tons Assets: 14 kVA Air pressure: 3 bar Max speed: 80m/min. Min.-max. glass thickness: 2- 18 mm Min.-max. glass size: 2550 x 3300 mm Photos/film available: Photos and video available 1.2.160

OCS type HC inline checkweigher with weighing cell Wipotec EC 2000, weighing range up to 750 g, d=-0.01 g, belt width approx. 145 mm (3 individual belts with a width of 30 mm each), centre distance infeed approx. 450 mm with pre-cut head stabelizing belt with a length of approx. 350 mm and a width of approx. 30 mm, centre distance weighing cell approx. 200 mm, centre distance outfeed approx. 680 mm, working height 800-950 mm, conveying direction from left to right, carton flap control with bad ejection, folding carton inclination control with bad ejection and ejection counter-check, folding carton weight control with bad ejection and ejection counter-check, capacity up to 600 weighings per minute, compressed air 6 bar, electrical connection 230V/50 Hz, connected load 0.8 KVA, machine footprint approx. 1600 x 800 mm (WxD), machine height approx. 2050 mm, net machine weight approx. 290 kg. ...

Offer 25110 Specifications: - Saw blade dimensions 2950 x 27.0 x 0.9 mm - Cutting speeds infinitely variable N 36 to 72 m/min - Max. clamping possibility 325 mm - Mitre adjustable up to 60 ° - Cutting range at 90° around 250 mm - Square 220 mm - flat 280 x 200 mm - Cutting range at 45° around 230 mm - flat 180 x 110 mm - Pneumatic connection 6 bar - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Chip clearing brush - Feed roller conveyor 4000 mm - Discharge roller conveyor with dimension stop 4000 mm - Weight approx. 450 kg - Space requirement approx. W 1400 x H 1650 x D 1350 mm

SCHENCK hydraulic power unit type PP250A B Used hydraulic power unit. Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 250 l/min Tank capacity 1.3 m³ Year of manufacture 1996 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent ...

SCHENCK hydraulic power unit type PP165 B Used hydraulic power unit Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 165 l/min Tank capacity 1 m³ Year of manufacture 1991 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent, we ...

SCHENCK hydraulic power unit type PP165 B Used hydraulic power unit Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 165 l/min Fuel tank capacity 0.95 m³ Year of manufacture 1987 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding a ...

Used spiral mixer DIOSNA, type: SP 80 D -completely overhauled- - for 80 kg of dough or 50 kg of flour - Stainless steel spiral - Stainless steel boiler - 2 Time clocks - 2 speeds - 1 reverse gear - Emergency stop switch - With center wheel for driving the machine - Kettle and kneading arm without Riesse - new electrics, new V-belts, repainted -El. Connection: 400 V, 3PH, 50 Hz, 14 A - Motor: 6 kW - Condition: Very good condition - 6 months warranty A video of the machine in operation can be made on request. Inspection and test run are possible by arrangement.

Product number: 3074 Type: PLH216 Serial number: 1340 Year of construction: 2006 Calibre: 13 - 50 mm Power: 3 x 400V, 50Hz, 2.5kW Dimensions: 1300 x 700 x 1250 mm Weight: 280 kg Hanging unit Type: 220-16 Serial number: 1318 Year of construction: 2003 Dimensions: 2550 x 650 x 1450 mm Weight: 105 kg

Product number: 3073 Type: Skindeasy Serial number: 48201 Year: 2015 Power: 3 x 400V, 50Hz, 0.4kW Dimensions: 1800 x 650 x 1400 mm

Product number: 3072B Type: CMC400 Serial number: 426 Year of construction: 2008 Belt width: 400 mm Filling capacity: 27 litres Power: 3 x 400V, 50Hz, 0.7kW Dimensions: 2860 x 750 x 1450 mm Weight: 390 kg With adjustable take-over outfeed conveyor

Product number: 3066 Type: PRoGRILL 1175 TFEF Serial number: 3237006 Year of construction: 2014 Belt width: 1100 mm Cooking length: 10000 mm Heating: thermal oil, 189kW + electric, 128kW Exhaust: 1000 m³/h Steam: 3 - 7 Bar Compressed air: 6 Bar, 12 l/min Water: 15,4 l/min for belt washer Power: 3 x 400V, 50Hz, 168kW Dimensions: 10000 x 2200 x 2450 mm With flipover conveyor in the middle Including welding trolley

Anko dough mixer: Product number: 3059R Type: ABM-33 Serial number: PO202200591-2 Year of construction: 2022 Mixer: 80 litres Power: 3 x 380V, 50Hz, 2.2kW Dimensions: 1100 x 1450 x 1300 mm Bottom dicharge Anko dough sheeter: Product number: 3060R Type: ABS-220 Serial number: PO202200591-1 Year of construction: 2022 Width sheet roller: 220 mm Capacity: 100 kg/hr Thickness dough: 4 - 12 mm Power: 3 x 380V, 50Hz, 2.25kW Dimensions: 1300 x 950 x 1400 mm Anko gyoza dumpling machine: Product number: 3061R Type: AFD-888 Serial number: 1501093 Year of construction: 2022 Capacity: 6000 pc/hr Hopper: 46 litres Power: 3 x 380V, 50Hz, 3.5kW Dimensions: 2450 x 2000 x 2050 mm Weight: 1400 kg

Thickness planer Rex - Constant planer Type: HO 63 Year of Make: 1980 Constant table height 800 mm 4-column guide and adjustable top Working width max. 630 mm Working height min. 5 mm to max. 280 mm 4-knife wedge bar shaft Knife flight circle D=140 mm Knife shaft speed 4,500 rpm. Chip removal max. 10 mm Feed speeds 8 + 16 m/min. Thickness table length 1,200 mm with 2 sliding rollers in the thickness table Motor 8.80 kW / 380 V / 50 Hz Pole-switchable feed motor 0.55 / 0.75 kW / 380 V / 50 Hz Electric height adjustment motor 0.55 / 380 V / 50 Hz Fine adjustment with 1/10 mm pitch Precision thickness measuring device with magnifying glass display Driven feed roller D=124 mm (top) Driven pull-out roller D=124 mm (top) Articulated pressure beams Suction nozzle D=160 mm Dimensions L 1100mm x W 1215 mm x H1770 mm Weight 1,350 kg

Vacuum pump Becker Rotary Vane Vacuum Pump Type KVT 3.100 Item no. B.153231g Built in 1999 Motor 3.0/3.6 kW Speed 1420 / 1700 rpm Pumping speed 100/120 m³/h Suction pressure/vacuum -900 mbar Dimensions 1000 mm x 450 mm x H 500 mm Shipping Dimensions 1200 mm x 800 mm x H 700 mm Weight with pallet 120 kg

UV dryer Superfici Type TU166-25+2UVM55 Serial No. 4548 Year of construction 1998 Passage width 1500 mm 2 UV lamps Material thickness maximum 110 mm Maximum width of the workpiece 1400 mm Height-adjustable feet Dimensions 2500 mm x 2300 mm x H 1650 Control cabinet dimensions 1000 mm x 850 mm x H 2180 mm

Table milling machine Kölle Milling machine and circular saw combined Type FK 5 Machine No. 462 With feed ELU With 30 mm and 40 mm milling spindle With sliding table Motor power tiller 3 kW Milling shaft speed 2800/4500/6000/10000 rpm. Spindle left and right rotation Table size 1400 mm x 920 mm Table opening minimum 70 mm – maximum 390 mm Milling spindle 30 mm with clamping length 130 mm Milling spindle 40 mm with clamping length 140 mm Feed ELU with 3 rollers Saw motor power 1.5 kW Saw blade spindle diameter 30 mm Speed 3300 rpm. Saw blade diameter maximum 350 mm Cutting height maximum 105 mm Sliding table support 1100 mm x 450 mm Extraction connection diameter 2 x 120 mm Weight 1050 kg with pallet Dimensions for shipping 1 pallet with sliding table 2700 mm x 800 mm x H 1000 mm 1 pallet with machine 1600 mm x 900 mm x H 1800 mm

Double mitre saw Wegoma Type SD 15 Machine No. 5533 Year of manufacture 1978 For the processing of plastic and aluminium profiles Cutting length maximum 3250 mm Cutting length minimum 350 mm 2 sawing units motors each 1.1 kW Saw blade diameter 330 mm Saw blade bore 30 mm Cutting width maximum 150 mm Cutting height maximum 90 mm Sawing units swivel to both sides 45° Sawing units can be tilted outwards up to 45° Both sawing units can be moved Hydropneumatic saw feed Compressed air connection 7 bar With 2 hand operation Pneumatic clamping cylinders for workpiece holding Dimensions Length 3700 mm x Width 1000 mm x Height 1400 mm

Dresser Kölle Surface planing machine Type AH 50 Machine No. 137 Year of manufacture 1985 Planing width 500 mm Maximum cutting depth 8 mm Dressing tables 1450 mm + 1270 mm Dressing stop 1100 mm x 150 mm Swivelling dressing stop Motor power 5.5 kW Engine slightly slowed down 4 Knife Shaft Strip planer knife Serrated table lips for noise reduction With Kölle swing protection for planer blade shaft With spare blades With planer knife adjustment gauge Weight with pallet 650 kg Dimensions 2800 mm x 850 mm x H 1000 mm

Sliding table saw Altendorf Type F90 Machine No. 66-9-135 Sliding carriage length 2200 mm Cutting width 800 mm Motor power 5.5 kW Flat belt drive, 2 speeds Cutting width to the right of the saw blade 800 mm max. saw blade diameter without splitting wedge 500 mm Cutting height maximum 165 mm Maximum saw blade diameter with splitting wedge 400 mm Information on the cutting height for saw blade diameter Saw blade diameter 250 mm Cutting height 0 - 55 mm Saw blade diameter 300 mm Cutting height 0 - 80 mm Saw blade diameter 350 mm Cutting height 25 - 105 mm Saw blade diameter 400 mm Cutting height 50 - 130 mm Saw blade bore 30 mm Saw blade cannot be swivelled Extraction connection diameter 120 mm + 80 mm Packaging dimensions approx. 2200 mm x 1400 mm x H 1500 mm Weight approx. 855 kg

Four-way planer Weinig Four-sided planer Type: PFA 14 N Built in 1972 Planing width 180 mm, Planing height 130 mm 6 planing shafts Entrance table length approx. 2000 mm Shaft arrangement 1 bottom approx. 4 kW 2 right approx. 3 kW 3 left approx. 4 kW 4 right approx. 5.5 kW 5 above approx. 7.5 kW 6 bottom approx. 4 kW Spindle diameter 40 mm Feed speed 6.5 - 49 m/min. Chain feed manual Waxilit pump with extraction distribution Planer heads included

Grinding machine Löwer double-sided Type: DSM 2000 Year of Make: 1996 CE Grinding width 190 mm Grinding thickness – material thickness 2 – 180 mm Sanding belt dimensions 200 x 1800 mm Wear-free ceramic sanding shoe (no graphite coating necessary) Motorized height adjustment 0.37 kW Workpiece length min. 300 mm Feed speed 6/11/16 m/min. Sanding belt drive 2 x 5.5 kW / 400 V Sanding belt speed 22 m/sec. 1 sanding shoe and cleaning brush from above 1 sanding shoe and cleaning brush from below Blow-off device in front of the outlet Suction nozzle diameters 2 x 150 mm and 2 x 120 mm Inlet height 850 mm Total connected load approx. 14 kW Incl. workpiece return consisting of inclined chute and return roller conveyor good, ready-to-use condition Machine dimensions: L 2070 mm x W 920 mm x H 1890 mm Weight approx. 1500 kg

Heesemann Wide Belt Sander Heesemann Multi-Purpose Surface Sander Type MFA 8 Machine No. 97.11.261 Year of Manufacture 1997 CE For sanding flat wood materials and/or flat painted wood materials Sanding width 1300 mm Sanding belt width 1350 mm Sanding belt speed 12/24, 0.5 – 12 / 20 m/sec. 2 sanding units. Unit arrangement: QLBw1300 Cross belt Longitudinal belt via sanding pad Brush unit Ionization and workpiece blasting CSD 16 mm/48 mm CSD pressure bar system with variable pressure control Machine control with graphical control panel with program memory for various types of wood and paint. With ionization device and workpiece blasting Ionization reduces the adhesion of grinding dust to the workpiece by neutralizing electrostatic charge, thus ensuring optimal workpiece cleaning. Cross belt, 13/17 kW motor power Longitudinal belt, 11/17 kW motor power, 11 kW ...

Table milling machine DROMA Type FM-4 Machine No. 8301 Built in 1994 Motor power: 5 kW With engine brake Spindle left and right rotation Speeds 3000/4500/6000/9000 rpm Spindle diameter 30 mm Spindle clamping length 150 mm Extraction connection diameter 2x120 mm Milling fence with fine adjustment left and right Table size 1010 mm x 900 mm Front and rear table extensions Dimensions 1 piece 1200 mm x 750 mm, 1 piece 1000 mm x 720 mm Machine weight 700 kg Weight of the table extensions each approx. 20 kg Dimensions Machine 1500 mm x 1200 mm x H 1400 mm With table extensions, total length 3220 mm Loading dimensions 1 pallet 1500 mm x 1200 mm x H 1600 mm Weight approx. 710 kg 1 pallet 1200 mm x 800 mm x 1200 mm, weight approx. 60 kg

Dowel drill Scheer Dowel Hole Drill Type DB 5 Machine No. 508310 Year of manufacture 1983 Drilling of carcasses, frame joints, drawers, Door coverings, rows of holes or groups of holes Drill beam length 640 mm Spindle spacing min. 32 mm, max. 640 mm 21 pieces of spindles Drilling depth 80 mm With drills Drill beams can be swivelled pneumatically Motor power 2.2 kW Portal passage maximum width with one side stop 915 mm, with 2 side stops 770 mm 2 pneumatic hold-down devices on machine table Weight 460 kg with pallet Dimensions 1350 mm x 820 mm x H 1400 mm

Long belt sanding machine Johannsen Type T 88 Machine No. 12500 Sanding belt dimensions 7800 mm x 150 mm Table size 2750 mm x 1000 mm Upper sanding belt cover With abrasive belt blow-out nozzle Table stroke 340 mm Sanding belt 2 speeds left and right rotation Grinding motor 3.5 / 5.5 kW Extraction fan 2.2 kW Extraction connection diameter 160 mm Including abrasive belts 1 piece grit 80, 9 pieces grit 100 Including a total of 3 sanding shoes 2 pieces size 300 mm x 140 mm, 1 piece 450 mm x 140 mm Dimensions 4000 mm x 1700 mm x H 1400 mm

Four-sided planer Guilliet Type KXY 220 Machine No. 343 Year of construction 1992 Planing width 220 mm Planing height 130 mm 4 planing shafts Entrance table length 2500 mm Spindle diameter 40 mm Fully equipped with planer heads Feed motor 1.5 kW Feed speed 4.5 – 27 m/min. 1.Shaft bottom 3.7kw 2nd shaft right 3.7 kW 3rd shaft left 3.7 kW 4.Shaft top 5.5 kW Engines slowed down Left shaft with electric width adjustment With suction distribution Functionally tested and ready for use Dimensions 3900 mm x 1450 mm x H 1500 mm Weight approx. 1600 kg

Veneer press Bürkle Chair seat press and molding press Type SE 23 60/50 2 floors Electrically heated plates Pressing area 600 mm x 550 mm Maximum opening per floor approx. 180 mm Maximum opening 400 mm Plate thickness of the middle plate 45 mm Piston diameter 160 mm Hydraulic motor 1.5 kW Pressure according to the display up to 600 kg/cm² Dimensions 1400 mm x 550 mm x H 2010 mm

Automatic cantering lathe Hempel fully automatic machine Type: VKH-10 Fully automatic, magazine-equipped machine for efficient production of larger objects such as candlesticks, Balls, barrels, cans and the like. Max. turning diameter 100 mm Max. diameter for balls 70 mm Max. turning length 120 mm Magazine adjustable for scantlings up to 800 mm in length. Stencil Turning Device Fully automatic workflow Automatic steady rest lubrication Spindle motor 7.56 kW 2800 rpm, with V-belt pulley Hydraulic motor 2.27 kW 1400 rpm. 1 continuously variable gear motor 0.57 kW Output infinitely adjustable from 180 to 800 pieces per hour Machine dimensions: L 3000 mm x W 1400 mm x H 1500 mm Weight approx. 1420 kg

Router Schanbacher and Ebner Copy router Type Tachista 55 DP Table size 750 mm x 750 mm Table height adjustment 100 mm Usable projection 600 mm Milling spindle stroke 140 mm Motor can be swivelled to both sides by 90° Motor power 2.2 kW With spare engine Including accessory milling cutter Weight approx. 450 kg Dimensions 750 mm x 1050 mm x H 1600 mm Shipping Dimensions 1200 mm x 800 mm x H 1800 mm

Drying chamber Vanicek Mühlböck Type ZLSM-4x1.20-3x1.20-04.72 Year of construction 2003 Interior dimensions gross 7.40 x 4.55 x H 4.25 meters 3 fans each 3 kW 10 measuring points With frequency converter With control Heating capacity 223 kW Water temperature 85 °C Water volume 14 m³/h Voltage 230/400 Volt Connected load 12 kW Fans 3 x 3 kW

HEMA UH 800 YOC 1995 Motor power 5.5 kW (amplified motor power) Roller diameter: 800 mm max. cutting width: 780 mm Max. cutting height: 500 mm Saw blade length: 5,600 mm APA roller guide (Panhans) top + bottom Blade tension indicator Driving device with brake Miter Gate Valve Safety doors with limit switch protection Engine brake Extraction connection: D 100 + 120 mm Dimensions: approx. 149 x 900 x 248 cm (W x D x H) Weight: 720 kg incl. various Gebr. Band Saw Blades

Continuous veneer press panel size 3200/1400mm External and inner hydraulic cylinders Press pressure can be adjusted separately Panel heating steam and electricity

Hofmann D632 Thickness Planer Brand: Hofmann Type D632 M-No.: 2533 Year of manufacture 2005 Main motor 7.5 KW - 400 V Speed 5,000 tpm Knife shaft Z-4 Circle ø125 mm Planing width 625 mm Planing thickness 3.5 - 275 mm Spahn removal max. 8 mm Thickness table length 1,000 mm Feed rate 7-14 m/min. Weight 980 KG