used 14 for sale

Inv. Num. : 8001 Type: IM6120 Producer: KEYENCE Created: 2014 Parameters: Axis X: 100 mm Axis Z: 30 mm Measuring range: 200 x 100/125 x 25 mm Weight: 36 kg

Inv. Num. : 7914 Type: PBM 7074 Producer: WEGENER Created: 2015 Parameters: Control system: Siemens Maximum bending angle: 90

Inv. Num. : 8012 Type: W 100 A Producer: TOS Created: 1991 Parameters: Work table length: 1250 mm Work table width: 1250 mm Maximum table load (uniform): 3000 kg Maximum spindle speed: 1120 1/min X-axis travel: 1600 mm Y-axis travel: 1120 mm Z-axis travel: 900 mm W-axis travel: 1250 mm Spindle diameter: 100 mm Power consumption: 15 kW Machine weight: 14000 kg

Inv. Num. : 8011 Type: H 100 A Producer: TOS Created: 1960 Parameters: Work table length: 1250 mm Work table width: 1120 mm X-axis travel: 1250 mm Y-axis travel: 1400 mm Travel travel Z-axis: 1250 mm Spindle diameter: 100 mm Taper: Morse 6 Power consumption: 7 kW Machine length: 6100 mm Machine width: 2850 mm

Inv. Num. : 7920 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1980-GO 1998 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 200 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler

Inv. Num. : 7919 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1986 Parameters: Rolling force: 12 5 t Max. workpiece diameter: 70 mm Workpiece width: 2000 mm Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler

Inv. Num. : 7918 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1984, GO 2006 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 2000 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler

Inv. Num. : 7908 Type: Platino Fiber Producer: Prima Power Created: 2018 Parameters: Maximum power: 4 kW Switch-on hours: 14991 h Hours: 8209 h Work table length: 3000 mm Work table width: 1500 mm Machine weight: 10,000 kg Equipment: New cutting head

Inv. Num. : 7817 Type: RUR 2500 G Producer: PIERCE Created: 2014 Parameters: Work table length: 6000 mm Work table width: 3000 mm Maximum sheet thickness when cutting: 120 mm Equipment: Rails Burning Machine Baths

Inv. Num. : 7796 Type: HSA 200 T Producer: Hidroliksan Created: 2022 Parameters: Operating hours: 1600 h Compressive force: 200 t Maximum stroke: 450 mm Top table length: 1600 mm Top table width: 1400 mm Speed (high): 250 mm/s Speed (down): 160 mm/s Working speed: 5-18 mm/s Machine height: 5000 mm Machine length: 3650 mm Machine width: 3400 mm Machine weight: 18,000 kg

Inv. Num. : 7825 Type: OPTIturn D560 x 2000 Producer: OPTIMUM Created: 2011 Parameters: Maximum turning diameter over bed: 560 mm Maximum turning diameter over support: 355 mm Maximum spindle speed: 1500 1/min Maximum workpiece weight: 500 kg Clamping diameter (sub-spindle): 315 mm Motor power: 7.5 kW Length: 3340 mm Width: 1150 mm Height: 1430 mm Weight: 2720 kg

Inv. Num. : 8297 Type: F146 Producer: SIAT Created: 2004 Parameters: Box size: 580 x 380 x 416 mm

Inv. Num. : 8296 Type: KW 28PI/2200 Producer: BMB Created: 2007 Parameters: Hours: 66540 h Clamping force: 280 t Screw diameter: 65 mm Injection capacity: 1125 cm³ Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 560 mm Injection weight: 14500 kg

Inv. Num. : 8314 Type: 42 BNA DHY Producer: Miyano Created: 2011 Parameters: Max. turning length: 235 mm Max. turning diameter: 80 mm Maximum spindle speed: 6000 1/min Max. rod diameter: 42 mm Weight: 3900 kg Equipment: IEMCA Bar Feeder

Inv. Num. : 8313 Type: 1500 R Producer: Kellenberger Created: 1972 Parameters: Table dimensions: 2060 x 140 mm Maximum grinding diameter: 250 mm Max. grinding length: 1500 mm Length: 3270 mm Width: 1600 mm Height: 1650 mm Weight: 3250 kg Equipment: DRO

Inv. Num. : 8205 Type: Pratica GLP Producer: Bottero Created: 2015 Parameters: Max. workpiece dimensions: 3150 x 1415 mm Number of axes: 3

Inv. Num. : 8203 Type: ALPHA 2800 XS Producer: Harrison Created: 2011 Parameters: Control system: FANUC Maximum turning length: 2000 mm Maximum turning diameter over bed: 800 mm Maximum turning diameter over support: 710 mm Maximum spindle speed: 1400 1/min Spindle bore: 125 mm Weight: 7500 kg

Inv. Num. : 8222 Type:- Producer: KUKA Created: 2014 Parameters: Maximum arm reach: 3200 mm Number of axles: 6 pieces Equipment: LORCH welding machine

Inv. Num. : 8263 Type: L210A Manufacturer: Hyundai Created: 2014 Parameters: Control system: FANUC Maximum turning length: 410 mm Max. turning diameter: 350 mm Maximum spindle speed: 4000 1/min Bar diameter: 66 mm Length: 2413 mm Width: 1651 mm Height: 1880 mm Weight: 4104 kg

Inv. Num. : 5441 Type: HSA – 428EA Producer: Hartford Created: 2015 Parameters: Control system: Heidenhain 530iHSCI Switch-on hours: 14613 h Operating hours: 5484 h Work table length: 4000 mm Work table width: 2500 mm Maximum table load (uniform): 18000 kg Spindle drive power: 26 kW Maximum distance between the spindle and the table: 2800 mm X-axis travel: 4000 mm Y-axis travel: 2800 mm Travel distances Z-axis: 1400 mm Number of axles: 5 pieces Maximum vertical spindle speed: 6000 1/min Maximum feed speed axis X: 10000 mm/min Maximum feed speed axis Y: 10000 mm/min Maximum feed speed axis Z: 10000 mm/min Cone: ISO 50 Number of all tools: 32 pieces Rapid traverse X/Y/Z: 16000/20000/15000 mm/min Max. tool weight: 15 kg Coolant tank: 400 l Machine height: 6415 mm Machine length: 13000 mm Machine width: 7300 mm Machine weight: 44000 kg  ...

Inv. Num. : 8207 Type: W 160 H Producer: ŠKODA Created: 1979 Parameters: Control system: Mefi Work table length: 3150 mm Work table width: 2800 mm Maximum spindle speed: 1200 1/min X-axis travel: 3000 mm Y-axis travel: 2500 mm Travel distances Z-axis: 1400 mm W-axis travel: 1250 mm Spindle diameter: 160 mm Cone: ISO 50 Machine height: 7620 mm Machine length: 5900 mm Machine width: 12440 mm Machine weight: 68000 kg

Inv. Num. : 8185 Type: FP 3 NC Producer: Deckel Generated: Parameters: Work table length: 700 mm Work table width: 460 mm Maximum vertical spindle speed: 4000 1/min X-axis travel: 400 mm Y-axis travel: 400 mm Travel Z axis: 340 mm Machine height: 1800 mm Machine length: 2000 mm Machine width: 1400 mm Machine weight: 1900 kg

Inv. Num. : 8196 Type: SRM 125 CNC Producer: ŠKODA Created: 1974, GO 2010 Parameters: Control system: Heidenhain Manual Plus 4110 Maximum turning length: 3000 mm Maximum turning diameter over bed: 1250 mm Maximum turning diameter over support: 900 mm Maximum workpiece weight: 14000 kg Length: 8000 mm Width: 3000 mm Height: 2100 mm Weight: 16350 t Equipment: Fixed bezel Technical documentation Front panel Cutter head Universal chuck

Inv. Num. : 8265 Type: FU 400/V/2 Producer: Heckert Generated: Parameters: Work table length: 1600 mm Work table width: 400 mm Maximum vertical spindle speed: 1400 1/min X-axis travel: 1150 mm Y-axis travel: 370 mm Z-axis travel: 430 mm Machine height: 1980 mm Machine length: 2490 mm Machine width: 2270 mm Machine weight: 3850 kg

Inv. Num. : 8229 Type: PD-CNC Producer: Spinner Created: 2007 Parameters: Control system: Siemens Max. turning diameter: 120 mm Maximum length of travel in the X-axis: 400 mm Maximum feed rate in the Z-axis: 400 mm Maximum spindle speed: 8000 1/min Length: 2500 mm Width: 1400 mm Height: 1700 mm Weight: 2300 kg

Inv. Num. : 8049 Type: EDM 310 Producer: Exeron Created: 2009 Parameters: Table dimensions: 350 x 550 mm Max. travel length of the X-axis: 310 mm Max. travel length of the Y-axis: 270 mm Max. travel length of the Z-axis: 270 mm Maximum table load: 500 kg Maximum electrode weight: 25 kg Dielectric container capacity: 140 l Container size: 350 x 770 x 520 mm Length: 1500 mm Width: 1760 mm Height: 2200 mm Weight: 1650 kg

Inv. Num. : 8141 Type: MT 40 CNC Producer: Kovosvit Created: 1995 Parameters: Control system: FAGOR Max. turning length: 1500 mm Max. turning diameter: 500 mm Maximum turning diameter over support: 350 mm Spindle speeds: 3000 1/min Length: 3130 mm Width: 1560 mm Height: 1845 mm Weight: 2600 kg

Inv. Num. : 8144 Type: LYNX 220 LSYA Producer: DOOSAN Created: 2014 Parameters: Control system: Fanuc iSeries Max. turning diameter: 525 mm Maximum turning diameter over bed: 600 mm Maximum turning diameter over support: 400 mm Maximum main spindle power: 15 kW Axis X: 205 mm Axis Z: 560 mm Axis Y: 105 mm Weight: 4150 kg Equipment: Sub-spindle

Inv. Num. : 8160 Type: VWL 1200 Producer: MSA Created: 2015 Parameters: Axis X: 1300 mm Axis Z: 1000 mm Max. spindle speed: 500 1/min Inner diameter: 250-1400 mm Number of axes: 3 Length: 3800 mm Width: 3390 mm Height: 4400 mm Weight: 12000 kg

Inv. Num. : 8095 Type: TrumaBend V 170 Producer: Trumpf Created: 1996 Parameters: Switch-on hours: 46145 h Compressive force: 170 t Maximum bending length: 3500 mm Stroke: 215 mm Machine weight: 16000 kg

Inv. Num. : 8043 Type: ML 100 3Z Producer: NS MAQUINAS Created: 2017 Parameters: Max. workpiece diameter: 10-114 mm Minimum length of the workpiece: 335 mm Number of sanding belts: 6 pieces Abrasive belt speed: 10-30 m/s Sanding belt dimensions: 50 x 940 mm Weight: 600 kg

Inv. Num. : 8025 Type: Imperia Producer: Rabolini Created: 1993 Parameters: Format: 850x1250/1000x1400 mm Equipment: Loader

HOLGIC Lorad MultiCare Platinum (mammographic stereotactic punch biopsy device) Tube M 149 0.25, Workstation

Raystat / Krebser Swivel Bracket US-Uni with - Generator CPI CMP 200 DR - Tube RAD 14 Fa. Varian 0.6/1.2 - Mobile patient couch • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • You buy the system in IST condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as Used, EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • The offer is subject to prior sale.

Table Size 30″ x 16″ Table Capacity 3300 pounds X-Axis Travel 26 inches Y-Axis Travel 16 inches Z-Axis Travel 14 inches Rapid Traverse Rate (X/Y/Z) 1102 ipm Spindle Taper CAT 40 Spindle Speed 8,000 rpm Main Motor 10 hp Tool Changer Capacity 16 Machine Dimensions 73″ x 71″ x 88″ Machine Weight 6500 pounds Equipped With: Hurco WinMax 5 CNC Control

Length With Bucket 10.42ft in Width Over Tires 4.89ft in Ground Clearance 8.39in Height To Top Of Cab 6.49ft in Wheelbase 2.95ft in Length W/O Bucket 8.2ft in Clearance At Max Lift And Dump 7.11ft in Reach At Max Lift And Dump 20.79in Specifications Engine Emission Tier Level Tier 4 Gross Power 49hp Cooling System Liquid Aspiration Turbocharged Fuel Type Turbo Diesel Operational Lift Arm Path Radius Operational Weight 5026.6lb Fuel Capacity 14.4gal Max Speed 7.1mph Loader Series M2-Series Height To Hinge Pin 9.2ft in Operating Load Rating 1300lb Tipping Angle 2599.3degrees Bucket Width 62.1in Hydraulic Main Pump Flow Standard 16.7gal/min 2018 Bob Cat S450

DoosanPuma 3100LM serial number ML0117-000145 turning 600 mm number of tool changer stations 12 coolant pump yes chip conveyor yes CNC control, brand, type Siemens sinumerik 828D dimension L 5300 mm dimension W 2100 mm dimension H 3200 mm

Mori Seiki NL1500SY/500 CNC Lathe w/ Y-Axis and Subspindle Mori Seiki NL-1500SY/500 CNC Turning Center New: 2007 Specifications (To Be Verified By Buyer): Max Cutting Diameter: 14 Max Cutting Length: 20.2 X-Axis Travel: 10.2 Z-Axis Travel: 23.2 Y-Axis Travel: 3.9 C-Axis Indexing: Full C-Axis Spindle Speed: 6,000 RPM (Main/Sub) Spindle Motor: 15 HP (Main/Sub) Spindle Nose: A2-5 Spindle Bore: 2.4 Bar Capacity: 2 Live Tooling Speed: 6,000 RPM Tool Capacity: 12 Station Equipped With: MSX-850III Control Y-Axis Live Milling, Full C-Axis Sub Spindle 3J Collet Chucks Main/Sub Probing Tool Presetter Parts Catcher Chip Conveyor Coolant System

X Axis Travel: 30 Y Axis Travel: 16 Z Axis Travel: 20 Rapid Rate X Axis: 1,000 IPM Rapid Rate Y Axis: 1,000 IPM Rapid Rate Z Axis: 1,000 IPM Max Table Load: 3,000 LBS Spindle Motor: 20 HP Spindle Speed: 15,000 RPM Spindle Taper: 40 CT Tool Changer: 21 ATC Max Torque 90 ft-lbf Max Thrust X 2550 lbf Max Thrust Y 2550 lbf Max Thrust Z 4200 lbfMax Tool Diameter 3.5 Max Tool Weight 12 lb Tool-to-Tool (avg) 4.2 s Chip-to-Chip (avg) 4.5 s Table Size: 36 x 14 Weight: 7,800 LBS Options: Programmable Coolant 15K Spindle Side Mount Tool Changer Rigid Tapping Visual Quick Code Spindle Orientation Chip Auger

X-Axis Travel: 30 Y-Axis Travel: 16 Z-Axis Travel: 20 Spindle Nose to Table: 4 Minimum - 24 Maximum Table Size: 36 x 14 T-Slot Width: 5/8 T-Slot Center Distance: 4.92 Maximum Weight on Table: 1500 lbs Motor: 30 HP Maximum Spindle Speed: 12000 RPM Spindle Taper: 40 Taper Feedrates on X, Y, and Z-Axis: 1400 IPM Maximum Tool Diameter: 5 (Adjacent Empty) 3 (Full) Maximum Tool Weight: 11 Tool to Tool Change Time: 1.6 sec EQUIPPED WITH Haas CNC Control Haas HRT160 4th Axis Liquid Cooled Spindle 24+1 Capacity Automatic Tool Changer Haas Probe Rigid Tapping

Excellent Condition With Very Low Hours MAXIMUM SWING.. 26.5 SWING OVER CARRIAGE 13.78 MAXIMUM MACHINING DIAMETER. 14.75 DISTANCE BETWEEN BOTH SPINDLES. 22.7 BAR WORK CAPACITY.. 2.56 RAPID TRAVERSE RATE: X-AXIS 1,181 IPM RAPID TRAVERSE RATE: Z-AXIS 1,299 IPM RAPID TRAVERSE C-AXIS.. 555 RPM MAIN SPINDLE: CHUCK (CAN USE 8 CHUCK) CURRENTLY HAS A ROYAL S26 COLLET CHUCK SPINDLE SPEED 5,000 RPM SPINDLE NOSE. A2-6 MOTOR 30/35 HP SPINDLE BORE. 2.99 SUB-SPINDLE: CHUCK 6 SPINDLE SPEED 6,000 RPM SUB-SPINDLE STROKE... 23 MOTOR 15 HP TURRET. 12 POSITIONS ROTARY TOOLS: SPINDLE SPEEDS... 4,500 RPM MOTOR 7.5 HP MACHINE SIZE. 115.4 X 70 X 72.4 TALL MACHINE WEIGHT... 11,250 LBS EQUIPPED WITH: MAZAK MAZATROL MATRIX NEXUS CNC CONTROL LNS MODEL 65 QUICK LOAD SERVO BAR FEEDER WITH LINERS CHIP CONVEYOR TOOL SETTER PARTS CATCHER 4- LIVE ...

2009 Haas TL-2 Swing Diameter S.A.E. METRIC Over Front Apron 20 508 mm Over Cross Slide 11 279 mm Capacities S.A.E. METRIC Chuck (optional) 8 203 mm Max Cutting Diameter (varies with turret) 16 406 mm Max Cutting Length (without workholding) 48 1219 mm Between Centers 48 1219 mm TRAVELS & FEEDRATES S.A.E. METRIC X Axis 8 203 mm Z Axis 48 1219 mm Rapids on X 450 in/min 11.4 m/min Rapids on Z 450 in/min 11.4 m/min Max Thrust X 3894 lb 17 321 N Max Thrust Z 1947 lb 8661 N SPINDLE S.A.E. METRIC Max Rating 10 hp 7.5 kW Max Speed 1800 rpm 1800 rpm Max Torque 108 ft-lb 355 rpm 146 Nm 355 rpm Spindle Nose A2-5 A2-5 Spindle Bore ø 2.30 58 mm SPINDLE (OPT) S.A.E. METRIC Max Rating 10 hp 7.5 kW Max Speed 3000 rpm 3000 rpm Max Torque 108 ft-lb 355 rpm 146 Nm 355 rpm

Load Height - Std 11.16 ft in (3400 mm) Reach From Swivel - Std 17.85 ft in (5440 mm) Dig Depth - Std 14.6 ft in (4450 mm) Reach At Load Height - Std 5.52 ft in (1680 mm) Load Height - Ext 14.01 ft in (4270 mm) Bucket Dig Force - Ext 5261 lb (2386.35 kg) Bucket Dig Force - Std 5453 lb (2473.44 kg) Dig Depth - Ext 18.48 ft in (5630 mm) Reach At Load Height - Ext 9.09 ft in (2770 mm) Load At Max Lift - Ext 866 lb (392.82 kg) Load At Max Lift - Std 1669 lb (757.05 kg) Reach From Swivel - Ext 21.49 ft in (6550 mm) Dimensions Transport Length 23.59 ft in (7190 mm) Transport Width 8.04 ft in (2450 mm) Transport Height 11.59 ft in (3530 mm) Wheelbase 7.26 ft in (2210 mm) Ground Clearance 1.09 ft in (330 mm) Height To Top Of Suspended Cab 9.42 ft in (2870 mm)

Max Turning Diameter: 21.7 Max Turning Length: 38.5 Max Swing: 30.3 X Axis Travel: 14.3 Z Axis Travel: 43.5 Spindle Speed: 2,000 RPM Spindle Motor: 50 HP Bar Capacity: 4.5 Spindle Bore: 5.51 Milling Motor RPM: 3,000 RPM Milling Motor HP: 15 H.P. Turret Stations: 12 Stations (All Live) EQUIPPED WITH: Fanuc Oi-TD CNC Control Live Tooling Programmable Tailstock Tool Setter Steady Rest Bracket: NO STEADY REST 145 PSI Hi Pressure Coolant LNS Heavy Duty Chip Conveyor PCMCIA Interface Foot Pedal Actuator Chuck & Tailstock MICROIL® ™ Mist Collector 18 AUTOBLOK BB-N-400-140 BIG BORE AIR Dimensions: 215 x 99 x 90 Weight: 21,380 LBS Options: Fanuc 0i-T Chip Conveyor Tool Presetter Tailstock Live Tooling 18 Autoblok Model BB-N-400 Big Bore Air Chuck Microil™ Mist Collector 145 PSI High Pressure Coolant ONLY 3,700 SPINDLE HOURS

Drehdurchmesser max. 320 mm Drehlänge max. 810 mm Steuerung MSX 701 IV / MAPPS IV Umlaufdurchmesser über Bett 800 mm Umlaufdurchmesser über Planschlitten 800 mm Abstand zwischen den Spitzen 1.130 mm Standard-Drehdurchmesser 200 mm Hauptspindel: Antriebsleistung - Hauptspindel 25 / 22 kW Gegenspindel: Drehzahl max. 5.000 min/-1 Antriebsleistung - Gegenspindel 25 / 22 kW Max. Drehmoment 358 Nm Spindeldurchmesser im vord. Lager 120 mm Spindelbohrung 73 mm Stangendurchgang 65 mm Spindelnase JIS A2-6 Futterdurchmesser 210 mm Revolver 1: Revolver 2: Revolver 3: Anzahl der Werkzeugplätze 16 pos. Anzahl der angetriebenen Werkzeugstationen 16 pos. Drehzahlbereich - angetr. Werkzeugstationen max. 6.000 min -1 Antriebsleistung - angetr. Werkzeugstationen 7,5 / 5,5 kW Y - Achse 110 (+65 / -45) mm Schaftdurchmesser 20 x 20 mm Schaftdurchmesser der Bohrer 32 mm Rev ...

TABLE LENGTH 36 TABLE WIDTH 14 X-AXIS TRAVEL 30 Y-AXIS TRAVEL 16 Z-AXIS TRAVEL 20 SPINDLE SPEED 12,000 RPM SPINDLE MOTOR 30 hp SPINDLE TAPER CAT 40 TOOL CAPACITY (ATC) 24 Equipped With RENISHAW WIRELESS INTUITIVE PROBING SYSTEM (WIPS) SIDE-MOUNT TOOL CHANGER (24 ATC) 5TH AXIS DRIVE & WIRING 4TH AXIS DRIVE & WIRING 12,000 RPM SPINDLE PROGRAMMABLE COOLANT CHIP AUGER COORDINATE ROTATION & SCALING HIGH-SPEED MACHINING SPINDLE ORIENTATION RIGID TAPPING MACROS USB PORT

SPECIFICATIONS: Chuck Size... 6 Max Diameter Bar Capacity.. 2 Max Swing Over Bed / Carriage... 23.2 / 6.7 Max Turning Diameter (Max / Std)... 9.84 / 6.7 Max Machining Length. 20.1 Main Motor... 20 / 15 HP Tools 12 / 24 Spindle Speed. 60 - 6000 RPM Spindle Bore 2.4 Milling Motor 5 HP Milling Speed.. 6000 RPM Rapid Traverse Rates (X / Z).. 1181 / 1417 IPM X-Axis Travel 17.7 Z-Axis Travel ...13 C-Axis Index... .001 Degrees Turret Index (Single Step). 0.15 Seconds Tailstock Taper.. MT#4 Machine Dimensions (L x W x H) 144 x 63 x 65 Machine Weight 7275 lbs. FEATURES: FANUC i Series 10.4 Color LCD PC / MCIA Interface C-Axis Milling Capability 6 Samchully MH-206 Hydraulic Chuck Auto Parts Catcher Tool Presetter Tailstock with Programmable Quill Chip Conveyor

Specifications: Capacity: Swing over bed Swing over bed with interference from front cover Swing over cross slide Maximum bar capacity Standard turning diameter Maximum turning diameter (main spindle) Maximum turning length Main Spindle: Maximum speed Spindle nose Spindle bearing diameter Spindle through hole diameter Minimum spindle indexing angle (C-axis) Travels: X-axis travel Y-axis travel Z-axis travel Feed Rate: X & Z-axes rapid traverse rate Y-axis rapid traverse rate Tailstock advance/retract traverse rates Maximum jog feedrate of tailstock Turret: Number of turret tool stations Shank height for angled tool Shank diameter for boring bar (main spindle) Rotary tool machining capacity Maximum rotary tool speed Tailstock: Travel Spindle diameter Spindle taper Cutting time Operation time Power On hours 36.22 23.58 29.21 3.15 10 ...

Standard Features ] • 254 mm Hydraulic Chucking System • A2-6 Spindle Nose • 76 mm Bar Capacity • 15 Color LCD Monitor • Built-In USB Port • 1 MB Program Memory • Rigid Tapping • User-Friendly Haas Control • Made in the USA [ ST-30 ] • 533 x 660 mm Max Capacity • 3400-rpm Spindle • 22,4 kW Vector Drive • 12-Station BOT Turret [ Options ] partial list • Programmable Hydraulic Tailstock • 6000-rpm Live Tooling with C Axis • High-Pressure Coolant Systems • Automatic Tool Presetter System • Belt-Type Chip Conveyor • Servo Auto Door • Ethernet Interface • Haas Intuitive Programming System • Haas Bar Feeder Weight 14,300 LBS

X-Axis Travel 84 Y-Axis Travel 40 Z-Axis Travel 30 Spindle Speed 7,500 RPM Spindle Taper CAT 50 Spindle Motor 30 HP Tool Magazine Capacity 30 ATC Control Haas CNC Chip Removal Chip Auger Coolant 300 PSI Through-Spindle Coolant Power Requirement 220/3ph Weight 28,900 Dimensions 214 x 120 x 140