used 14 for sale

Excellent Condition 3,000 Cutting Hours 8″ Chuck Size 4,000 RPM Spindle Speed 6,000 RPM Live Tooling 12 Station Live Tool Holder Turret LiveTooling TailStock MT5 Digital Control Slant Bed Box Ways Mist Extractor A2-8 Spindle Nose Automatic Tool Presetter C-Axis Milling 3″ Diameter Bar Capacity 8.5″ X-Axis Travel 22.4″ Z-Axis Travel 24″ Swing Over Bed 15″ Swing Over Carriage 20.1″ Machining Length 14.5 Max Turning Diameter 945 IPM Rapid Traverse .001 Degree C-Axis Index 0.45 Seconds Turret Index (Single Step) MORI-FANUC MSX-504 III CNC Control Built-In Integral Milling Spindle Motor Servo Driven Turret Coolant Tank and Pump Chip Conveyor

SWING DIAMETER Over Front Apron 762 mm Over Cross Slide 368 mm CAPACITIES Chuck Size 254 mm Max Cutting Diameter 432 mm Max Cutting Length 864 mm Bar Capacity 76 mm Between Centers 991 mm TRAVELS & FEEDRATES X Axis 287 mm Z Axis 864 mm Max Thrust X 15124 N Max Thrust Z 24020 N SPINDLE Max Rating 22 kW Max Speed 3400 RPM Max Torque 407 Nm 700 rpm Spindle Nose A2-6 Spindle Bore ø 88.9 mm TURRET Number of Tools 12 Stations Boring Bar Rear Clearance 114 mm EQUIPMENT Hennig 30 Swarf Conveyor

X axis: 16 Y axis: 12 Year of Manufacture: 2008 Manufacturer: Haas Model: Super Mini Mill Condition: Used TRAVELS X Axis: 406 mm Y Axis: 305 mm Z Axis: 254 mm Spindle Nose to Table (~ max): 356 mm Spindle Nose to Table (~ min): 102 mm TABLE Length: 914 mm Length (Work Area): 730 mm Width: 305 mm T-Slot Width: 16 mm T-Slot Center Distance: 110.0 mm Number of Std T-Slots: 3 Max Weight on Table (evenly distributed): 227 kg SPINDLE Max Rating: 15 hp 11.2 kW Max Speed: 10000 rpm Max Torque: 23 Nm - 4600 rpm Drive System: Direct Speed Belt Drive Taper: CT or BT 40 Bearing Lubrication: Air/Oil Injection Cooling: Air Cooled FEEDRATES Rapids on X: 30.5 m/min Rapids on Y: 30.5 m/min Rapids on Z: 30.5 m/min Max Cutting: 21.2 m/min AXIS MOTORS Max Thrust X: 8896 N Max Thrust Y: 8896 N Max Thrust Z: 8896 N TOOL CHANGER Type : Carousel Capacit ...

TECHNICAL DETAILS - Number of spindles : 2 - Number of turrets : 1 - Number of axes : 6 MAIN SPINDLE - Spindle nose : A2-8 - Max. bar diameter : 80 [mm] - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. turning diameter : 366 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260 x 795 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] COUNTER-SPINDLE - Spindle nose : A2-5 - Max. bar diameter : 43 [mm] - Max. turning diameter : 190 [mm] - Spindle power : 11 [kW] - Spindle speeds : 6.000 [rpm] - C axis indexing precision : 0,001 [°] - Travel : 734 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 41 [kVA] WEIGHT & DIMENSIONS : 1730 - Machine floor space : 4.414 x 2.370 [mm] - Machine height : 2.115 [ ...

Swing Over Bed .. 20.87 Swing Over Saddle ... 16.14 Distance Between Centers 39.37 Max Turning Diameter 13.39 Max Working Length .. 39.37 Axis Travel: XA10.24 ZA40.00 XB 5.51 ZB38.00 C Axis .. 360 Degree Spindle Speeds .. 38 ~ 3,800 RPM Speed Ranges Infinitely Variable X Auto Range Nose . Option A2-8 Big Bore Bore Diameter ... 3.14 Turret Upper Multitasking ... V-12 NC Turret Lower ... V8 (VDI) Indexing Time Non-Lift .. 0.18 Sec Live Tool Speeds 45 ~ 4,500 RPM Feedrates X/Z/C . 787/984/200 Tailstock Quill Diameter 3.54 Quill Bore Taper MT#5 Quill Travel 4.72 Main Drive Motor ... 30-HP 304 Ft-LB Torque Live Tool Motor . 9.5 HP Machine Weight .. 19,360 LBS Equipped With: Okuma OSP-200LA With Machining Navi L-G Spare M-Codes, 4-Sets Pitch Error Compensation Feed Hold During Threading Thread Start Point Offset Helical Cutting Spindle Synchronized T ...

2012 DOOSAN-PUMA 400MB S/N ML0130-004497 ML0130-004497 Swing: 24 Year of Manufacture: 2012 Manufacturer: Mazak Model: PUMA 400MB Condition: Used Specifications Maximum Swing: 24 Maximum Turning Diameter: 14.75 Maximum Turning Length: 21.7 Hole in Spindle: 2.5 Bar Capacity: 3 (3.15 Hole) Maximum Spindle Speed: 4,000 RPM Turret Positions: 12 X-Axis Travel: 9.05 Z-Axis Travel: 22.63

Model: Super Mini Mill 2 HAAS Three-Axis CNC Vertical Machining Center, S/N: 1088948 (New 2011) Specifications: Table size.14 x 40 Maximum table load capacity.500 Lbs. Travels: X-axis..20 Y-axis..16 Z-axis..14 Minimum/Maximum distance from spindle to table4/18 Spindle taperCAT 40 Spindle speed range0-10,000 R.P.M Rapid feed rates, all axes..1,200 I.P.M. Maximum cutting rate...833 I.P.M. Table size Maximum table load capacity Travels, X-axis Y-axis Z-axis Minimum/Maximum distance from spindle to table Spindle taper Spindle speed range Rapid feed rates, all axes Maximum cutting rate 14 x 40 500 Lbs. 20 16 14 4/18 CAT 40 0-10,000 R.P.M. 1,200 I.P.M. 833 I.P.M. Equipped With: HAAS three-axis CNC with 15 color LCD, USB, and RS-232 serial ports Brushless servo motors and servo amplifiers on all axes (24) Station side- ...

ULMA TR 200 SHRINK TUNNEL Manufacturer: ULMA Model: TR 200 IZDA Year: 2012 Serial no.: 1511269 400 V / 50 Hz / 22 A Power: 14.4 kW Overall dimensions: 2,200 x 1,300 x 1,270 mm (LxWxH) Chamber length: 1,735 mm Aperture: 430 x 230 mm (WxH)

Code: 0060 Brand: SAOMAD Model: UTP 150/6 - CE Standard Tenoning machine for wooden frames, doors - CE Standard Technical data: Circular saw unit: Blade diameter mm 400 F30 - Motor Hp 4 - Cutting height mm 125 - Horizontal shifting mm 150 Cutterhead unit: Cutterheads lenght mm 150 - Max opening between cutterheads mm 185 - Cutterheads diameter mm 160 - Motor Hp 3 - Horizontal cutterheads adjustment shaft tenoning unit: Shaft diameter mm 35 - Useful working length mm 160 - Motor Hp 5,5 - Vertical and horizontal adjustment - Max tool diameter mm 320 Manual tilting tenoning carriage mm 600 x 600 Pneumatic workpiece holders Inclinable graduated fence +/- 45° Sliding safety guards N° 3 suction ports diameter mm 140 N° 1 suction port diameter mm 80 Compressed air 6 atm Overall dimensions mm 3550 x 1400 x 1600 h

Code: 0024 Brand: ITALPRESSE Model: NUOVO/SP Quick setting semiautomatic case clamp Technical data Manual loading Max useful dimensions mm 2500 x 600 x 1250 Min useful dimensions mm 250 x 600 x 280 Motorized horizontal cross-beam with display Vertical beam setting N° 6 vertical cylinders N° 6 horizontal cylinders Cylinders stroke mm 70 Cross-beam stroke mm 920 Installed power Kw 0,55 Overall dimensions mm 3600 x 800 x 2550 h Weight kg 1400

Code: 0032 Brand: COMAFER - ITALY Model: COMBI - CE Standard Combined briquetting and grinding machine in one machine to solve space problems in the factory, suitable for joinery, sawmills, carpentry, furniture factories and various - CE Standard Technical data: Hydraulic briquetting machine : Output / hour kg 60-70 Briquette dimensions diameter mm 60 Motor Hp 7,5 Chip container diameter mm 900 Level probe Hydraulic grinding machine Feeding opening mm 965 x 500 Shaft diameter mm 160 N° shaft turns 136 Motor power Hp 7,5 Screening hole mm 10 Output / hour kg 100-200 Suction inlet diameter mm 150 Overall dimensions mm 2400 x 1000 x 1600 h Weight kg 1480

Code: 0091 Brand: KUPER Model: FW / J 920 - CE Standard Veneer thread splicer - CE Standard Technical data: Reach mm 920 Veneer thickness mm 0,4 - 2 Feed 15 mt/min Working table height mm 900 Motor 0,18 Kw Installed power 0,50 Kw Hot air heating 200 W Compressed air 6 bar Overall dimensions mm 1280 x 580 x 1470 h Weight kg 166

Code: 0097 Brand: VITAP Model: ALFA 35 T - CE Standard Semi-automatic multiple boring machine with 35 spindles for furniture, kitchens, bathroom furniture, custom-made furniture, panels - CE Standard Technical data N° 35 spindles with quick coupling Centre distance between each spindle mm 32 Centre distance between first and last spindle mm 1088 Max depth of hole mm 70 Board dimensions mm 1454 x 590 Spindle rotations per minute 2800 Motor power Hp 3 Turret with 6 different depth positions Side fence Horizontal/vertical 45 degree pneumatic tilting head Metric bar 3000 mm with stops Fence for 45 degrees frames Operating pressure 6- 8 atm Overall dimensions mm 1590 x 860 x 1140 h Weight kg 454

Code: 0126 Brand: SCM Model: STARTECH 23 - CE Standard Multiple boring machine for horizontal, vertical and 45 degree inclined boring for furniture, custom-made furniture, panels, kitchens, doors and various - CE Standard N° 23 quick-attack spindles Spindle centre distance mm 32 Max drilling centre distance mm 704 Max drilling depth mm 60 Spindle rotation speed rpm 2800 Min/max panel thickness mm 10/70 Working table height mm 900 Pneumatic panel clamping pressures Motor power Hp 3 Compressed air 6 bar Extension Overall dimensions mm 1440 x 1200 x 1100 h Weight kg 430

Code: 0031 Brand: COMAFER - ITALY Model: COMBI - CE Standard Combined briquetting and grinding machine in one machine to solve space problems in the factory, suitable for joinery, sawmills, carpentry, furniture factories and various - CE Standard Technical data: Hydraulic briquetting machine : Output / hour kg 60-70 Briquette dimensions diameter mm 60 Motor Hp 7,5 Chip container diameter mm 900 Level probe Hydraulic grinding machine Feeding opening mm 965 x 500 Shaft diameter mm 160 N° shaft turns 136 Motor power Hp 7,5 Screening hole mm 10 Output / hour kg 100-200 Suction inlet diameter mm 150 Overall dimensions mm 2400 x 1000 x 1600 h Weight kg 1480

Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 35,950 mm Number of fields / row of shelves: 09 pcs á 3,900 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 10x Pallet rack stand, used Material colour: Ral 5015 blue Profile dimensions: 85 x 65 x 2.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 3,300 mm high 1,100 mm deep 36x Pallet rack crossbar, used Material colour: Ral 2004 orange Box profile: 140 x 50 mm Truss Type: PNB0444 Agraffe: 4 HK (hooks) Clear width: 3,900 mm Max. load per pair of trusses 2,300 kg with the same weight. Distributed load 72x Safety pin, used Material colour: sendzimir galvanised For securing the longitudin ...

HAUSER S 40 400 CNC coordinate grinding machine CN retrofitted in 2020. TECHNICAL FEATURES: NC Type: FANUC 0i-MF X-axis travel: 650 [mm] Maximum speed X-axis travel: 4000 [mm/min] X-axis working feed speed: 0 - 1800 [mm/min] Y-axis travel: 450 [mm] Y-axis working feed speed: 0 - 1800 [mm/min] Z-axis travel: 130 [mm] Minimum speed. Z-axis travel: 0.5 [mm/min] Maximum speed Z-axis travel: 12000 [mm/min] Z-axis stroke frequency: max. 4 [Hz] W-axis travel: 500 [mm] C-axis speed (planetary): 5 - 250 [rpm] Maximum speed W-axis travel: 800 [mm/min] U-axis stroke (radial advance): 5.5 [mm] Distance between columns: 750 [mm] Table length: 770 [mm] Table width: 630 [mm] Clear passage between grinding motor and table: 585 [mm] Maximum weight Tabletop Allowable: 500 [Kg] Supply voltage: 400 [V] Weight: 5000 [Kg] EQUIPMENT INCLUDED: 1 HAUSER tool detection device 1 ...

NAKAMURA NTJ100 CNC Lathe TECHNICAL FEATURES: Year: 2014 NC Type: FANUC 31i-B-NT-IPS Colour touch screen: 19 [] Distance between spindles: 910 [mm] Maximum diameter Turning time: 175 [mm] Maximum length Machinable: 678 [mm] Z1 axis stroke: 1040 [mm] X1 axle stroke: 330 [mm] Y1 axis travel: +/- 40 [mm] Z2 axis stroke: 678 [mm] X2 axle stroke: 127.5 [mm] Y2 axis travel: +/- 32.5 [mm] B-axis angular travel: 182 [°] X-axis fast feed speed: 20000 [mm/min] Z-axis fast feed speed: 40000 [mm/min] Y-axis fast feed speed: 6000 [mm/min] Spindle Nose: A2-6 Maximum diameter in bar: 65 [mm] Maximum speed Spindle: 4500 [RPM] C-axis indexing accuracy: 0.001 [°] Spindle power: 11 [kW] Counter Spindle Nose: A2-5 Maximum diameter Counter-spindle bar 42 [mm] Maximum speed Spindle: 5000 [RPM] C-axis sub-spindle indexing accuracy: 0.001 [°] Spindle power: 7.5 [kW] Number of  ...

CNC controller: FS-31IA5 (MAPPS 4) Capacity Turning length mm: 1.542 Max. turning diameter mm: ø: ø660 Swing over bed mm: ø: ø730 Turning diameter f. lower turret mm: ø350 Distance between spindle centers mm: 1.862 Bar work capacity mm: 91 Turn-mill spindle Full indexing specifications: Yes X-axis travel mm: 750 Z-axis travel mm: 1.550+100 (for ATC) B-axis degree: ±180º (0.0001°) Speed spindle rpm: 12.000 Y-axis travel mm: ±210 Drive power kW: 18,5/11 Tool magazine Magazine places: 100 Tool holder: CAPTO C6 Tool diameter max. mm: 140 Tool weight max kg: 8 Lower turret X-axis travel mm: 195 Z-axis travel mm: 1.525 Number of tool slots St .: 12 Indexing time s: 0.28 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 22/18,5 (30min/cont) Manufacturer: KITAGAWA Maximun torque Nm: 60kN Counter spindle Speed sp ...

CNC controller: FS-31IA5 (MAPPS 4) Capacity Turning length mm: 1.542 Max. turning diameter mm: ø: ø660 Swing over bed mm: ø: ø730 Bar work capacity mm: 91 Distance between spindle centers mm: 1.862 Turning diameter f. lower turret mm: ø350 Turn-mill spindle Full indexing specifications: Yes X-axis travel mm: 750 Z-axis travel mm: 1.550+100 (for ATC) B-axis degree: ±180º (0.0001°) Speed spindle rpm: 12.000 Drive power kW: 18,5/11 Y-axis travel mm: ±210 Tool magazine Magazine places: 100 Tool holder: CAPTO C6 Tool diameter max. mm: 140 Tool weight max kg: 8 Lower turret X-axis travel mm: 195 Z-axis travel mm: 1.525 Number of tool slots St .: 12 Indexing time s: 0.28 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 22/18,5 (30min/cont) Manufacturer: KITAGAWA Maximun torque Nm: 60kN Counter spindle Speed s ...

Technical description – Terex Fuchs MHL 434 (built in 2005) Condition: Very good Operating hours: 7,800 h General information • Manufacturer: Terex Fuchs, Germany • Model: MHL 434 • Serial number: 3301400143 • Year of construction: 2005 • Areas of application: timber handling, recycling, scrap loading, port logistics Specifications • Engine: Deutz TCD 4.1 L4, 4-cylinder in-line engine • Engine power: 112 kW (EU Stage II / US Tier 2) • Displacement: 4.1 litres • Nominal speed: 2,000 rpm • Fuel tank: 293 litres • Service weight: 24,100 – 25,700 kg • Maximum radius: 10.7 m • Travel speed: up to 19 km/h (2-speed powershift transmission) • Turning radius: 5.5 m • Tyres: Twin tyres 10.00-20 16PR with tyre pressure monitoring • Hydraulic system: flow rate max. 330 l/min, working pressure 320/360 bar • Hydraulic oil tank: 270 liters Saf ...

For sale is a top-equipped system for briquetting including silos, conveyor technology and packaging unit, consisting of the following components: For sale is a comprehensive briquetting plant including silos, conveyor technology and packaging unit, consisting of the following components: Silo and discharge technology 2x steel silos, each approx. 20 m³ usable capacity Including silo discharge systems Briquetting presses 1x Briquetting press SPM PAWERT AG, Type 84/1 - I 90/200, Masch.-Nr. 1060, Power: 55 kW 1x Briquetting press SPM PAWERT AG, Type 96/1 - I 90/200 SBP, Masch.-Nr. 1140Bj.2021 Conveyor and transport system Complete transport route including: • - 2 cooling lines • - All conveyor belts, roller conveyors and accessories Cutting & packaging technology 2 cross-cut stations with noise protection cabin 1 Feeder KÖRA Packmat, type presumably EF-235 1 shrink pack ...

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

Code: 0114 Brand: SCM MINIMAX Model: UNILEV 150 Universal sanding machine for straight and round parts , furniture, window frames , panels, doors, window frames and various Technical data: Lenght of worktables mm 1440 Tilting worktable 0-45° Motor 3,3 Kw Sanding belt width mm 150 Sanding belt lenght mm 2170 Pneumatically controlled oscillating belt Suction port diameter mm 120 Overall dimensions: mm 1440 x 720 x 1550 h Weight kg 470

Code: 0133 Brand: PAOLONI Model: PF 530 N - CE Standard Surface planer for carpentry, window frames, woodwork, sawmill - CE Standard Technical data: Table width mm 530 Table length mm 3000 N° 4 knives Shaft rotation speed rpm 5000 Motor power Hp 5,5 Tilting guide 0-45° Worktable height from the ground mm 860 Bridge planer protection Infeed table movement with lever control Suction mouth diameter mm 150 Overall dimensions mm 3000 x 1100 x 1400 h Weight kg 750

Maximum force ton-force 400 Slider stroke length mm 400 Slider strokes per minute 25 Maximum distance between table and slider (in lower position of slider) mm 470 Size of adjustment of distance between down-stamp a plate and slider mm 160 Table overall dimensions: mm ·from front to rear 1000 ·from left to right 1000 Slider overall dimensions: mm ·from front to rear 800 Main electric motor power kW 40 Press overall dimensions mm ·length 3470 ·width 3140 ·height 5940 Press weight kg 32600

Equipped for printing flexible packaging, laminates Web width max. 570 mm Print width max. 560 mm Configuration: Unwinding (Ø1000 mm, max. 350 kg) Feeding with Teknek Webclean + 2xCorona 9 printing units for flexographic printing with GEW UV incl. ink pumps on each printing unit UV tower for safe UV curing before lamination 1 MP unit (multi-purpose) for solvent- and water-based 2-component inks, varnishes, etc. incl. viscosity control Inline lamination (dry and wet lamination) Conversion Module Inspection Video 16 single die-cutter for labels with Kocher & Bech GapMaster (NB: width only 16) Retractor unit (Ø1000 mm, max. 350 kg) (on rails De/Relam for unit 1+2, 2 x towers (unwind + return) for cold foil) 17 sleeve sets for plates Everything is in excellent condition 101, 112, 126, 130, 134, 138, 140, 142, 144 17 anilox rollers in excellent condition Additional ink c ...

Used bread roll line KÖNIG, type: G2000 with Mini Rex Futura -In bakery condition- Compact bread roll line - look round - stamping (stamping) -oval - folded in and rolled long - Mini Rex Futura head machine - Warp knitting drums FS/SKG54 and AKG70 - Weight range: 25 to 75g and 70 to 140g - Can also be rotated to look only round and take off directly - Cooking cabinet G 2000 K2 - Proofing time approx. 6 minutes at maximum output - With side discharge belt single-row - With tools for emperor and shell - Received last service and inspection - Tested and cleaned - Weight range: 25 to 75g and 70 to 140g - Effective capacity: approx. 4,000 pcs./h - Capacity proofer: approx. 2,500 pcs./h The roll line is in good condition and is ready for immediate use. Viewing and test run are possible at any time by arrangement.

We are selling here a vacuum tumbler from the manufacturer Rühle, type MNKR 200 in a good used and functional condition. Runs on 400 volts, year of manufacture 2000, vacuum, 200 litres, touch display, programmable, workshop tested, immediately ready for use, dimensions W/D/H 150/80/140 cm, others on request.

We are selling here a pull-in press from the manufacturer Possenti type F-PFT5-500-410 in a good used and working condition. Operation with compressed air 6 bar, rollable, 3 inserts 9/11/14 cm passage, with net pull-in, workshop tested, dimensions W/D/H 55/284/175 cm, others on request.

Crankcase for MWM RHS 518 A, 8 cylinders for sale. Housing is in very good, used condition, see detail photo. Previously used as an emergency power generator with few operating hours. Part Number: 26.01-82/04 26.01-82/34 E 26.100-142/04 26.100-142/34 E

Anlaser for MWM 234 Motor: - 24V - 5.4kW - 9 teeth Bosch Number: 0001416024 / 0 001 416 024

Electric motor for sale. Characteristics: - ▲400V (50Hz) 1440 1/min: 4kW - Y 690V (50Hz) 1440 1/min: 4kW - ▲440V (60Hz) 1725 1/min: 4kW - ▲460V (60Hz) 1735 1/min: 4kW

Electric motor for sale. Characteristics: - ▲380V / Y 560V (50Hz) 1465 1/min: 15kW - ▲400V/Y 690V (50Hz) 1470 1/min: 15kW - ▲475V (50Hz) 1470 1/min: 15kW - ▲440V (60Hz) 1465 1/min: 17kW - ▲450V (60Hz) 1470 1/min: 17kW

Offer 25105 Specifications: - max. working width 3050 mm - max. cutting capacity - for sheet steel 6.35 mm - 4 mm for stainless steel - 8 mm for aluminium - Adjustable cutting angle - Number of hydraulic hold-downs 14 pcs - Back gauge with positioning control AMADA 10 - 1000 mm - Front angle stop + support arm - Stroke rate 12 - 26 rpm - Pneumatic connection - Drive 400 V / 5.5 kW - Table height approx. 860 mm - Space required including back gauge, without front support arms -ca. W 3800 x H 1950 x D 2300 mm - Weight approx. 6500 kg - with: - E - foot switch - Sheet metal hold-up - Cutting length adjustment - Cut line illumination

Shelving (shelves and frames), Bito, different widths / heights and depths - used - : Prices per piece (net), ex location! We reserve the right to make a minimum purchase! In addition, we can offer approx. 400 pieces of bracing beams (as a replacement or alternative for clamping crosses). Price per piece 3.-€ (net)! Manufacturer: Bito Type: SV Year of manufacture: unknown Condition: good Available: immediately Location. Frankenberg Camp Shelves: Price: 7.-€ Depth 29.5cm / Field depth 30cm Width 1.30m = 2398 pieces Price: 12.-€ Depth 80cm / Field depth 80cm Width 1.30m = 23 pieces Frame: Field depth: 30cm Height 5m: 195 pieces – 30.-€ (net) / piece Field depth: 60cm Height 2m: 12 pieces – 30.-€ (net) / piece Height 2,14m: 3 pieces – 30.-€ (net) / piece Height 2,19m: 1 piece – 30.-€ (net) / piece Height 4,20m: 22 pieces � ...

Code: 0079 Brand: HIRZT - ITALY Model: LIVRA/5 - CE Standard Point to point through-feed boring machine with drilling from the bottom for furniture, kitchens, custom furniture, bathroom furniture, panels, for joinery and various - CE Standard Features: Total flexibility: Zero setting time High productivity : very short time of panel loading/unloading Graphic and parametric CN 4 NC axis: Axis X : panel movement by clamps Axis Y : boring head movement Axis Z : vertical boring head movement Axis X : micro head movement for front/back boring Aggregate circular saw Full Productivity : For serial processing the unloading system allows a high productivity - lt is possible to process sequences of big and small lots with a reduction of positioning and loading times Advantage of boring from the bottom - 1.Cleaning: Boring from the bottom gets the panel's good face protected ...

New exhibition machine! List price: 32.665,- € complete in standard version with: Stable, torsion-free frame made of steel, in welded and screwed construction - Slat press beam TOP with 6 elements, lamella press bar SIDE with 5 elements - Lamella press beam with tried-and-tested tolerance compensation (Ganner system) for tightly pressed carcass connections - Counterpressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the vertical press beam at the bottom - Electromotive adjustment of the two press beams via precision trapezoidal lead screws (with increased pitch and concentricity accuracy) and high-performance running nuts with fat reservoir - The compression is electromotive, via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the press beams  ...

Hörauf SN 140 three-sided cutter Art.nr. PS6211 Price 15500 Euro FCA Germany

Machine Details Stock-No. 1105-04041 Type of machine Machining Center - Vertical Make LID MAHO DMG Type DMC 635 V Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time IMMEDIATELY Freight basis EX WORK Price Technical details X-Travel 635 mm Y-Travel 510 mm Z-Travel 460 mm table-size 790 x 560 mm spindle taper ISO SK 40 turning speed range 12000 1/min feeds longditudinal/cross/vertical 1 - 30000 mm/min Rapid motion -longitudinal/cross/vertical 30 m/min No. of Tools in Magazine 20 workpiece diameter at full load 80 mm wotkpiece diameter with 2 vacant positions 140 mm Workpiece length 300 mm Weight of tools max. 7 kg table load 600 kg spindle drive 9 / 11 kW control HEIDENHAIN TNC 530I total power requirement 30 kVA Additional information cnc HEIDENHAIN I TNC 530 MAGSIN POSITIONS 32 SK 40 El ...

Machine Details Stock number 1105-04042 Machine Type: Surface Grinding Machine Make JACOBSEN Type 1432 Year of construction 1992 Condition Conventional control type Storage location HAGUENAU FRANCE Country of origin Delivery time at short notice - by arrangement. Freight base delivery from site. Price Technical details Grinding length 900 mm Grinding width 410 mm Travel - x 900 mm Travel - y 410 mm Travel - z 300 mm Machine weight approx. 2700 kg Information Distance table - spindle center: 135-575 mm Table speed X: 30-30000 mm/min. Table speed Y: 4-3750 mm/min. Table speed Z: 4-4000 mm/min. Max. grinding wheel dimension: 300x50x76.2 mm Drive power grinding spindle: 4.7 kW MAGNETIC PLATE BRAILLON 800 X 400 MM 5 GRINDING FLANGES

Machine Details Stock-No. 1105-04033 Type of machine CNC Turning- and Milling Center Make DMG MORI Type CTX beta 800 Year of manufacture 2009 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time IMMEDIATELY Freight basis ex site Technical details turning diameter max. 390 mm turning length 800 mm control Sinumerik 840D sl Siemens Greates Pass Round Over Bed 700 mm Turning Speed Range - Main Spindle 20 - 4,000 min/-1 Power capacity - main spindle 45 / 35 kW max. torque 700 Nm C-Axis 360° Spindle Nose 220H5 Chucking diameter - mm max. bar capacity 102 mm number of toolpositions 12 pos. Number of driven toolspositions 12 pos. power capacity driven tool-stations 14.2 kW Spindle speed - driven tool stations 40 - 10.000 min -1 tool taper VDI 40 DIN69880 max. torque 34 Nm X-AXIS 290 mm Z-AXIS 800 mm rapid traverse X: 30 / ...

Machine Details Stock-No. 1105-04046 Type of machine Machining Center - Vertical Make HAAS Type VF 2 SSYT Year of manufacture 2023 Type of control CNC Storage location LAGER Country of origin USA Delivery time immediately Freight basis ex works, loaded on truck Price Technical details X-Travel 762 mm Y-Travel 508 mm Z-Travel 568 mm table surface area 914 X 356 mm spindle taper SK 40 max spindle turning speed range 12000 rpm Rapid Traverse 35 m/min control HAAS ATC 24 Pos. table load 680 kg spindle drive 22 kW total power requirement 35 kW weight of the machine approx. 4.5 t dimensions 3.55 x 2.4 x 2.72 m Additional information NICE MACHINE WITH ROBOT FANUC 12000 RPM TOOL EYES PROBE PARTS SAMPLE VERY NICE FROM 2023 Accessories: electronical hand wheel, 1 tool fixture, chip conveyor, coolant

SPEED GOVERNOR RS - 12470914

TURBOCHARGER RR151-14

TURBOCHARGERS RR151-14

TURBOCHARGER RR151-14

TURBOCHARGER ABB RR151-14

Control Type: CNC Control: Eltropilot 2 Turning diameter over bed: 280 mm Turning diameter over face slide: 185 mm Turning length: 250 mm Spindle bore: 50 mm Bar Passage: 34 mm Tip height: 240 mm Revolver Sauter: 12 stations 8 driven VDI 20 Rapid traverse feed: 12 m/min Tailstock Quill Holder: ML 3 Collet holder: ER 25/32 Power requirement: 18 kVA Weight approx.: 2.8 t Dimensions approx. L x W x H: 2180 x 1610 x 1730 Power Chuck Berg 140 1 set of hard jaws, various sets of soft jaws, 100 Collets 171 E 5 - 36 mm 6-point, 4-edge, intermediate and special sizes, Tool holder VDI 20 59 pieces radial right and left, Drill rod holders, Parting Sword Holder, Powered Brackets Sauter VDI 29 1 x radial, 1 x axial, Turret Alignment Mandrel Ground Type Chip conveyor with water pan and additional coolant pump Documentation complete 1999 General ...

Drilling machine with boom very good condition. Little in operating hours, Use: Repair purposes. Sale with angle clamping table. Tool holders: approx. 10 adapters - MK mounts as well as 1 adapter for tapping. The vice is not included, Manufacturer: KAAST Model No.: RO42L Year of construction. ca. 2014 Speed levels 12 mech. 24-1253 1/min. 44-1500 1/min. electric clamping of the boom in the Height Adjustment - Tip Switch Feed: -automatic feed scale - manual - handwheel. Drilling depth adjustment via handwheel According to BG, the machine has a security enclosure . The Electrically locked access door facilitates the rear access to the drilling table. The machine housing can be dismantled and is included on request. The drill with cooling water basin. and pump Further data on request Viewing possible under power. Dismantling and spreading, loadi ...