used 15 for sale

Sunrise IW-80SD Hydraulic Profile Steel Shear and Hole Punch with Double Cylinder Specifications: Hole punch: Punching pressure: 80 t Punching capacity: ø 26 x 22 mm Projection: 510 mm U-steel height: 180 mm Max. stroke length: 100 mm Stroke rate / min (20 mm stroke): 29 Working height: 1050 mm Profile steel shears: 90°: 152 x 152 x 13 mm 45°: 80 x 80 x 10 mm Working height: 1165 mm Motor power: 7.5 kW Dimensions (LxWxH), approx.: 1830 x 820 x 1760 mm Weight, approx.: 2650 kg Equipment: - Electrical contact length stop - Incl. all protective devices - Footswitch for both stations - Extensive accessories (punches and dies)

TECHNICAL SPECIFICATIONS: Clamping Force: 650 ton Shot Weight (Max): 2375 g Distance Between Tie-Bars (H): 1100 mm Distance Between Tie-Bars (V): 960 mm Platen Size (H): 1510 mm Platen Size (V): 1440 mm Screw Diameter: 90 mm Mould Height (Max): 950 mm Mould Height (Min): 450 mm Daylight Between Platens (Max): 1850 mm Opening Stroke (Max): 1400 mm Ejector Force: 9,50 ton Ejector Stroke: 250 mm Screw L/D Ratio: 25 Screw Speed: 190 rpm Screw Torque: 5000 N·m Injection Volume: 2610 cm³ Injection Pressure: 1583 bar Injection Rate: 751 cm³/s Nozzle Force (Max): 15 ton Nozzle Stroke (Max): 700 mm Plasticising Capacity: 123.50 g/s Heating Zones: 9 Heating Capacity: 46.40 kW

Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...

Sanyo MPR-311D(H) Medication Refrigerator 340l Safe, worry-free, cool storage of valuable medical products Efficient temperature control A thermistor sensor and electronic temperature control ensure that that the setpoint temperature is maintained. Even if the door is opened and closed every now and then, the fans ensure rapid temperature compensation, to ensure highly reliable and stable storage conditions, on which the outside temperature has no influence. Equipped with digital temperature display A clear digital temperature display allows for quick visual inspection to the current operating temperature. To simplify visual temperature control, the temperature is measured in 1°C increments for a temperature range of 0°C to +15°C. Fan forced circulating air Thanks to the fan-forced recirculation system, the temperature is evenly distributed throughout the chamb ...

Sanyo MIR-253 Refrigerated Incubator -10°C – +50°C SANYO's MIR series refrigerated incubators are considered exceptional units suitable for a wide range of applications as they offer a temperature range of -10°C to 50°C. In the pursuit of temperature precision and improved usability. These incubators contain an 8-bit microcomputer and control the heater and compressor within a precise range of ±0.2 °C and ±1 °C, respectively. In addition, MIR-153 can be applied to a variety of experimental patterns using a 3-step microcomputer program. This refrigerated incubator is designed to meet a wide range of advanced experimental needs, ranging from microorganism cultures and plant germination tests to various constant temperature experiments. The MIR-253 has the following features: Microprocessor control with feedforward function Energy savings CFC-free, on-site foamed ...

Year of construction: 2000 Material: PS Butto output up to 1300kg/h Special equipment is the winding machine with which you can cut narrow films from (150mm -100mm) or for example: 8x175mm or 2x700mm The machine has been regularly maintained and is in good condition!

PET-Compressor Year of construction 2015 Capacity 750 m³/ min. Operation pressure 40 bar Rotation speed 330 rpm Electric motor 132 kW incl. refrigeration dryer Compressor is in good condition, has been regularly serviced!

Year of Make: 2009 Clamping force: 400 tons Screw diameter: 90 mm Shot Volume: 2481 cm³ Injection pressure increased: 1599 bar incl. removal robot Engel ERC 34 Good condition

Weiler Condor 81 - Universal lathe - K+C 3-axis position indicator - Bison 3204-160 3-jaw lathe chuck - Collet chuck + various collets - Feed protection - Multifix - Coolant device - Swarf back wall - Full service carried out (oil change, belt change, etc.) - Year of construction 1984 Specifications - Circumferential Ø over bed: 330 mm - Circulating Ø over face slide: 185 mm - Turning length between tips: 750 mm - Turning length between tips with covered guide and pull spindle: 650 mm - Tip height: 165 mm - Bed width: 240 mm Fulcrum shaft: - Spindle head DIN 55027: size 5 - or similar to DIN 55029 (Camlock D1): size 4 - Spindle Ø in the front bearing: 70 mm - Spindle passage: 40 mm - Inner cone according to DIN 228: MK5 - Centering tip according to DIN 806: MK3 - Face plate Ø max.: 280 mm - Chuck Ø normal: 160 mm - Chuck Ø maximum: 200 mm Tool slides: ...

59 Pcs. Machine Feet / 7 Models - for leveling machines of all kinds - 23x 250/150/90 mm - 18x 200/120/100 mm - 6x 250/150/100 mm - 3x 240/100/80 mm - 4x 150/150/50 mm - 2x 250/115/70 mm - 3x 200/200/60 mm

Meba ECO 335 DGA - Automatic band saw - Material feed up to 600 mm - Year of construction: 2002 Specifications - Cutting range 90° round/flat: 335 / 500x335 mm - Mitre right 45° round/flat: 330 mm / 320x335 mm - Mitre right 30° round/flat: 200 mm / 200x335 mm - Clamping range bundle tension width/height: 0-500 mm / 15-335 mm - Single/Multiple Material Insertion: 0-600 mm / 0-9999 mm - Leftover piece length manual/automatic: approx. 70 mm / approx. 110 mm - Cutting speed: 15 - 150 m/min (AC drive) - Cutting pressure: infinitely hydraulic - Lowering speed: 0 - 300 mm/min (infinitely variable) - Saw blade dimensions: 4400 x 34 x 1.1 mm - Saw blade tension: with torque wrench - Max. contact weight: max. 250 kg/m - Working height: 750 mm - Noise emission: 74 dB(A) Connection data: - Power supply: 3x 400 V / N / PE / 50 Hz - Compressed air: 6 - 8 bar, min. 50 l/min  ...

Special price € 4,100 instead of 4,930 excl. VAT Solberga SE2030 - Gear drilling machine (new) Recording: MK3 Capacity: 30 mm - The drill head can be swivelled 360° around the column and is height-adjustable. - The gearbox is built with our traditional and tested technology for the highest possible torque. Helical gears in combination of steel and reinforced fiber material provide a high degree of efficiency, a low noise level, as well as a long service life and an almost maintenance-free transmission. - The spindle is made of steel and ensures optimal concentricity of the tool thanks to its adjustable tapered roller or ball bearing. The machine has an adjustable spindle return spring. This allows the restoring force to be adapted to the weight of the tool. - Automatic feed (M model) - When the preset drilling depth is reached, the spindle returns to its original positio ...

Special price € 9,200 instead of € 11,040 excl. VAT Thomas Super Trad 301 So Easy - Semi-Automatic Metal Band Saw - The SO EASY saw allows a complete cutting cycle without the constant presence of the operator, thanks to the hydraulic control system for lowering the saw frame - Hydraulic vise - Limit switch for adjusting the saw frame return directly above the material to be cut - Selector switch to MANUAL cutting mode with button to quickly access the material to be cut - Central control panel at the front of the machine with illuminated alarm system - Automation is controlled by a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting requirements of medium-sized ferrous materials - Large round work table plateau that rotates with the mitre of the saw blade, guaranteeing excellent support for the material to  ...

Deckel FP4MA 2204 - CNC Tool Milling Machine - 2022 refurbished - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Power-operated tool clamps horizontally and vertically - Automatic speed manual transmission - Automatic clamping in the X, Y and Z axis - Automatic central lubrication - Coolant device - Direct displacement measurement - Anti-collision clutch in the Y and Z axes - Year of construction 1988 - Incl. tool holders, drilling/milling tools & tool trolleys Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head can be moved manually on the headdle block: 150 mm Main Drive: - Pole-switchable three-phase brake motor: manual  ...

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2003 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: 5 - Spindle speeds: 2 - Constant cutting speed: 0-700 / 700-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW G0Cmy7Z - Power DC motor Z-axis: 12 Nm - Power DC motor X-axis: 4 Nm - Motor pump power:  ...

Urban AP 6500 F - Travelling column milling machine - Heidenhain iTNC 530 path control, control panel can be moved over the entire processing length - Robust basic construction as a welded frame construction - Ball rail guides on all axes - Milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y/Z axis with ball screw (20 m/min) - 6 chip drawers - Swivelling clamping device for 6200 mm workpiece length - 12 Pneumatic workpiece clamps - Manually operated central lubrication - Moving disc tool changer for 8 tools - Micro-Spray - Cooling emulsion pump - Machine light - Security fence - Safety bumper - Safety light curtains - Machine guard pneumatically vertical opening Specifications - Travel X/Y/Z: 6500 / 155 / 110 mm - Working range X/Y/Z with swivel device: 6200 / 155 / 110 mm - Space requirement with security fen ...

Deckel FP3A 2820 - CNC Milling Machine - Deckel Contour 3 CNC control - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Hydraulic tool clamp - Automatic speed manual transmission - Automatic clamping in X/Y/Z axes - Automatic central lubrication - Coolant device - Direct displacement measurement - Collision protection clutch in Z/Y axes - Built in 1987 Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke vertical: 80 mm Cpovd9Rv - Vertical milling head can be moved to the headrest: 150 mm Main Drive: - Motor: pole-switchable three-phase brake motor and manual transmission with clockwise/counterclockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Level Jump: 1.25 - Tool holder: SK40 (M16) - Tool  ...

Kunzmann WF4/3 - Universal milling machine - Heidenhain position display - Stepless feed in all axes - Rapid traverses in all axes - Hydraulic tightening system - Rigid angle table - Electrical central lubrication - Coolant device - Workplace lighting - Machine feet - Year of construction 1995 Specifications - Mount: SK40 - Speed range (infinitely variable): 40 - 2550 rpm - Travel X/Y/Z: 400 / 320 / 400 mm - Feed X/Y/Z: 0 - 2000 mm/min - Quill stroke vertical: 60 mm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm - Weight: approx. 1500 kg

MTcut UE110-5A - 5-axis machining center - Heidenhain iTNC 530 SmarT.NC HSCI controller - 40-fold tool changer - Rotary table Ø 610 mm - Oil mist extraction - Hydraulic vice incl. elevation - Center clamp - Tool holders -Tool cabinet -Milling cutter -Magnetic disk - Solid CAM with iMachining, with post-processor - Halmer optical presetting device - Spindle A 3182 hrs - Year of construction 2016 Specifications Field of work: - X-axis travel: 1100 mm - Y-axis travel: 610 mm - Z-axis travel: 610 mm - Travel B-axis: -30 / +120 ° - Travel C-axis: 0.001 x 360 ° - Rapid traverse X/Y/Z: 36 / 36 / 24 m/min - Feed: 1 - 7500 mm/min - Positioning accuracy: ± 0.005 mm - Repeatability: ± 0.003 mm - Guides X/Y/Z: rollers 35 / 35 / 45 mm Roundtable: - Rotary table Ø: 610 mm - Speed: 50 rpm - Positioning accuracy: 15 - Workpiece weight: max. 500 kg - Spindle no ...

750 pcs Grinding Wheels - Mixed Lot / Large Batch - Various sizes, shapes and materials - The following sizes and quantities as well as many other grinding wheels are available: 45x 40 / 40 / 9 22x 50 / 10 / 10 1x 50 / 25 / 15 12x 50 / 35 / 22 7x 70 / 35 / 14 7x 75 / 10 / 8 34x 100 / 20 / 24 18x 100 / 20 / 25 3x 125 / 13 / 25 3x 125 / 25 / 32 7x 125 / 30 / 32 4x 150 / 50 / 50 14x 175 / 10 / 20 5x 175 / 10 / 32 38x 175 / 100 / 76 85x 175 / 11 / 48 6x 175 / 15 / 20 5x 175 / 30 / 20 1x 175 / 30 / 40 5x 175 / 35 / 20 12x 175 / 60 / 48 1x 175 / 60 / 65 15x 175 / 9 / 48 11x 200 / 10 / 48 16x 200 / 10 / 76 5x 200 / 20 / 20 5x 200 / 20 / 25 4x 200 / 25 / 32 2x 200 / 75 / 48 5x 245 / 30 / 82 144x 250 / 15 / 76 1x 250 / 15 / 82 1x 250 / 20 / 32 1x 250 / 20 / 75 2x 250 / 25 / 50 1x 250 / 30 / 50 2x 250 / 35 / 82 2x 250 / 40 / 38 28x 300 / 10 / 125 1x 30 ...

Doosan PUMA 2600SY - 6-axis CNC turning center - Center width: 760 mm - Circumference Ø: 780 mm - Spindle bore: 86 mm - Doosan-Fanuc CNC control - Breuning-Irco ILS RBK 10012 Bar Feeder - Year of construction 2011 Specifications Capacity: - Circumferential Ø over bed: 780 mm - Circumferential Ø over slide: 630 mm - Rec. Rotary Ø: 255 mm - Max. rotary Ø: 376 mm - Max. turning length: 760 mm - Bar loading capacity: 76 mm Spindle: - Spindle speed belt type: 3500 rpm - Spindle nose: ASA A2#8 - Spindle bearing Ø: 140 mm - Spindle passage Ø: 86 mm - Min. spindle indexing angle (C-axis): 0.001 ° - Sub-spindle speed (integrated): 6000 rpm - Sub-spindle nose: ASA A2-5 - Front counter-spindle bearing Ø: 90 mm - Sub-spindle passage Ø: 62 mm - Min. counter-spindle indexing angle (C-axis): 0.001° Tool turret: - Number of tool stations: 12 - Tool outer Ø:  ...

Voest DA300-1000 - Universal lathe - 3-jaw lathe chuck Ø 400 mm - 4-jaw face plate Ø 600 mm - Grinding device Ø 200 mm - Multifix - Interchangeable gears - Instruction manual & documents - Year of construction 1975 Specifications Workspace: - Tip height: 300 mm - Circumferential Ø over bed: 620 mm - Circumferential Ø in offset: 800 mm - Circumferential Ø above the face slide: 360 mm - Length of the offset: 407 mm - Center width: 1000 mm - Max. workpiece weight between tips (without steady rest): 1800 kg Main spindle: - Spindle head: 8 DIN 55022 - Spindle bore: 83 mm - Inner cone: Metric 90 - Grit: MK5 Tailstock: - Quill stroke: 180 mm - Jaw Ø: 85 mm - Inner cone of quill: MK5 Grips: - Face plate Ø: 600 mm - Max. chuck Ø: 410 mm Main spindle speeds: - Number of steps: 18 - Range: 14 - 1000 rpm Feeds: - Length feed: 0.086 - 4.866 mm/rev (66)  ...

Urban AP 5000 F - Travelling column milling machine - Heidenhain track control TNC 410 M, control panel can be moved over the entire processing length - Robust basic construction as a welded frame construction - Ball rail guides on all axes - Milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y/Z axis with ball screw (20 m/min) - 2 chip drawers - Swivelling clamping device for 4700 mm workpiece length - 10 Pneumatic workpiece clamps - Manually operated central lubrication - Moving disc tool changer for 8 tools - Micro-Spray - Cooling emulsion pump - Machine light - Safety bumper - Machine guard pneumatically vertical opening - Year of construction 2005 - Control on: 26910h - Program run: 9185h - Spindle on: 6557h Defects: - Air hoses of the tensioners have to be partially replaced - Contact cables of the cylin ...

Mycrona Magnus II 600 - CNC Coordinate Measuring Machine - Machine foundation and bridge made of granite - incl. 3D CAD-capable PC Demis software - incl. TP200 probing system - All axles air supported - Ball screw drive - Haidenhain Glass Scales - Large measuring range - 2 quills independently - Machine serviced and tested - Year of construction: 2002 Specifications - Measuring range: 600 x 600 x 300 mm - Working air pressure: 6.5 bar - Air consumption: 80 Nl/min at 5 bar - Dimensions WxHxD: approx. 1550 x 2300 x 1700 mm - Weight: approx. 2200 kg

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2001 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW - Power DC motor Z-axis: 6.8 Nm - Power DC motor X-axis: 3.4 Nm - Motor pump power: 0.57 ...

Ho Chun U-1000B - Universal Bed Milling Machine - 3-axis position indicator - Universal milling head - Hardened and ground guideways - Infinitely variable feeds - Stepless speeds with 2 levels - Horizontal milling device - Hydraulic tool feed - Drive 11 kW - Automatic central lubrication - Coolant device - Table covering - CE certification - Incl. operating instructions and documents - Year of construction 2001 - Complete service carried out Specifications Workbench: - Table clamping surface: 1500 x 360 mm - Table load: 800 kg Travel: - X-axis longitudinal: 1000 mm - Y-axis transverse: 540 mm - Z-axis vertical: 430 mm Workspace: - Distance spindle nose / table: 50 - 480 mm - Distance between spindle center / stand: 350 mm Feeds: - Number of feeds: infinitely variable - Feed longitudinal / transverse: 16 - 1200 mm/min - Feed rate: 8 - 450 mm/min - Rapi ...

Intos FNGJ40 - Tool Milling Machine Automatic feed in all axes ACU-RITE 3-axis position indicator Hydraulic tool clamping Coolant Setup Workplace lighting Built in 1999 Specifications Workspace: - Horizontal longitudinal movement of the table (axis X): 600 mm - Horizontal transverse movement of the milling head (axis Y): 400 mm - Vertical movement of the table (axis Z): 400 mm Clamping surface of the vertical table: - Length x height: 500 x 320 mm - T-slots number/spacing/size: 5 / 50 mm / 14H8 Fixed angle table clamping surface: - Length x width: 800 x 400 mm - T-slots number/spacing/width: 8 / 50 mm / 14H8 Feed and rapid traverse: - Engine power/speed: 1.5 kW / 940 rpm - Feed stages: 18 - Feed range axis X and Y: 16 - 800 mm/min - Feed range axis Z: 8 - 400 mm/min - Rapid traverse axis X and Y: 2000 mm/min - Rapid traverse axis Z: 1000 mm/min - Maximum fe ...

ID3415 Metso Lokotrack 1415 S year/Baujahr 2015 9320 hours/hours 91 t Mobile impact crusher, opening width crusher: 1540 x 1170 mm, maximum feed size: 1000 mm, with feed hopper with side elevation, vibrating chute, pre-screen with side belt, crusher discharge conveyor belt, 1-deck screening machine 3500 x 1600 mm, conveyor belt under screening machine, stockpile belt, return conveyor belt Chain-mounted impact mill, opening width crusher: 1540 x 1170 mm, maximum feed size: 1000 mm, with feed hopper with side elevation, vibrating trough, pre-screen with side belt, crusher discharge conveyor belt, 1-deck screening machine 3500 x 1600 mm, conveyor belt under screening machine, stockpile belt, return conveyor belt

Shaft diameter 40 mm Roller diameter 152 / 162 mm Roller speed 8.5 rpm Drive motor 1.1 kW Infeed 120 mm Weight 470 kg Dimensions L/W/H 900 mm / 600 mm / 1,100 mm Accessories: some rollers

year: 2015 incl. DWS 80 water softener The DWS 80 system is a water softening element that was directly connected to the system so that softened water can be circulated. RZ is composed as follows: R = radial fan (air is forced upwards by pressure) Z = Additional options, as follows Own water tank Evaporation pump Operating pump Operating voltage: 400 V, 50 Hz Control voltage: 24 V DC Dimensions of the system: 1,000 x 1,630 x 2,000 mm Weight of the system: 480 kg Good condition

Alternator NEWAGE Stamford suitable for Jenbacher J320 X 5 Pieces Bearing Type: 6319 C3 / 6228 C3 Grease Type: Klüber ASONIC GHY72 Speed / Frequency: 1500-1800 rpm / 50-60 Hz Fully serviced, 0 hours since last maintenance, painted and megger tested. In excellent conditioin, ready for operation. Photos attached. Cogeneración Técnica Energética info@ctenergetica.com +34 674945249

Oil Mist Separator Koton KF-20E Intake pipe: Ø 150 mm Oil drain hose: Ø 6 mm Voltage: 380V 50HZ Air flow: 1080 m³/h Power consumption: 0.4 kW End filter service life: 4000-6000 h Machine dimensions: 633 X 380 x 856 mm Weight: 46 kg incl. accessories for installation Demonstration model, as good as new unused Delivery possible

OKUMA Multus B300-W Milling Turning Center TECHNICAL FEATURES: NC Type: OSP-P200L Distance between points: 900 [mm] Maximum diameter Turning Rate: 630 [mm] Permissible diameter above carriage: 630 [mm] Diameter allowed above the bench: 630 [mm] X-axis travel: 580 [mm] Y-axis travel: -80 / +80 [mm] Z-axis travel: 935 [mm] W-axis stroke: 1000 [mm] B-axis travel: -30 / +195 [°] B-axis indexing accuracy: 0.001 [°] Maximum rotational speed Milling spindle: 6000 [rpm] Milling Spindle Tool Attachment: HSK-A63 Maximum power Milling spindle: 11 [kW] Maximum torque Milling spindle: 65.7 [Nm] Tool magazine capacity: 60 Maximum length Tool Size: 300 [mm] Maximum diameter Tool Size: 130 [mm] Maximum weight per tool: 10 [Kg] X-axis fast feed speed: 40000 [mm/min] Z-axis fast feed speed: 40000 [mm/min] Y-axis fast feed speed: 26000 [mm/min] W axis fast feed speed: 20000 [m ...

TECHNICAL FEATURES: X-axis travel: 650 [mm] Maximum speed X-axis travel: 4000 [mm/min] X-axis working feed speed: 0 - 1800 [mm/min] Y-axis travel: 450 [mm] Y-axis working feed speed: 0 - 1800 [mm/min] Z-axis travel: 130 [mm] Minimum speed. Z-axis travel: 0.5 [mm/min] Maximum speed Z-axis travel: 12000 [mm/min] Z-axis stroke frequency: max. 4 [Hz] W-axis travel: 500 [mm] C-axis speed (planetary): 5 - 250 [rpm] Maximum speed W-axis travel: 800 [mm/min] U-axis stroke (radial advance): 5.5 [mm] Distance between columns: 750 [mm] Table length: 770 [mm] Table width: 630 [mm] Clear passage between grinding motor and table: 585 [mm] Maximum weight Tabletop Allowable: 500 [Kg] Supply voltage: 400 [V] Weight: 4550 [Kg] ADDITIONAL INFORMATION: x1 HI-CUT pack including: -protection of the work area -Exhaust device with electrostatic air filter - fire protection devi ...

BLOHM Planomat 616 HP CNC surface grinding machine TECHNICAL FEATURES: Year: 2015 NC Type: SIEMENS 840D SL Maximum surface area. Grinding Length x Width: 1600 x 600 [mm] X-axis stroke (longitudinal axis): 1700 [mm] Minimum speed. X-axis travel: 30 [mm/min] Maximum speed X-axis travel: 30000 [mm/min] X-axis resolution: 0.001 [mm] Y-axis stroke (vertical axis): 800 [mm] Minimum speed. Y-axis travel: 4 [mm/min] Maximum speed Y-axis travel: 6000 [mm/min] Y-axis resolution: 0.001 [mm] Z-axis stroke (transverse axis): 560 [mm] Minimum speed. Z-axis travel: 4 [mm/min] Maximum speed Z-axis travel: 6000 [mm/min] Z-axis resolution: 0.001 [mm] Minimum distance. Spindle/table: 150 [mm] Maximum distance Spindle/Table: 950 [mm] Spindle power for the grinding wheel: 15 [kW] Maximum diameter Grinding wheel: 400 [mm] Maximum width Grinding wheel: 30 [mm] Wheel bore: 127 [mm] Ma ...

CMA TRD 38 CNC 3000 CNC drilling machine was built in 2015 in Spain by COMERCIAL DE MAQUINARIA ALZIRA S.L. The machine, designed for drilling precision holes and threading, is an excellent choice for companies specialising, among others, in the construction of machinery, the production of steel structures or the production of other industrial installations. The machine is characterised by, among others, a movable, precise work head and an extremely stable design, made of sections with thickened and reinforced walls. The machining process is performed in three axes (X,Y,Z). In order to achieve excellent dynamic and repeatable feeds, movement in all axes takes place on hardened, high-quality linear guides. All running components are also continuously and fully automatically lubricated, ensuring uninterrupted machine operation for many years of use. The CMA TRD 38 CNC beam drilling machi ...

GILDEMEISTER GLD 20 5A CNC sliding head lathe was built in 2001 in Italy by GILDEMEISTER Italiana S.p.A.. The machine is designed for even the most complex machining of workpieces with complex geometries. In order to achieve maximum precision, the workspace is equipped with many reliable components of excellent technical specification. These include among others two high-speed spindles and a rapid, 7-position turret. Daily work, on the other hand, is facilitated by the intelligent FANUC CNC controller, which has an intuitive interface and many useful functions. The offered GLD 20-5A swiss-type lathe weighs approximately 2000 kg. Technical specifications of the GILDEMEISTER GLD 20 5A CNC turning center General data - number of axes: 5 - maximum turning diameter: 20 mm - minimum turning diameter: 3 mm - turning length: approx. 70 mm - rapid traverse in all axes: 12 m/min - maximu ...

FANUC Arc Mate 120iC/12L robotic welding station was built in 2016. This system enables fully automatic welding of workpieces using MIG/MAG and TIG methods. The machining process is performed by a reliable industrial robot, which, in combination with two positioners, enables the machining of parts with even the most complex shapes. The robotic welding station is fully complete and consists of the following components: – robot arm: FANUC Arc Mate 120iC/12L – controller: FANUC R-30iB – welding positioner: PEH 1-250 (2 pcs.) – welder: LINCOLN POWER WAVE S500 – liquid-cooled welding torch: ABICOR BINZEL ABIROB W500/45 – cooling unit: LINCOLN COOLARC 50 – welding torch cleaning station: ABICOR BINZEL BRS-CC – wire feeder: LINCOLN 4R100 AUTODRIVE – welding wire reel cassette – light curtains: SICK – operator’s panel (2 pcs.) – control cabinet – cover ...

CORMAK KEP 150-300 plasma cutting machine was built in 2021. The machine is also known as KT7 CNC SILVER 15/30 or CORMAK V-CUT BASIC 1530. The KEP 150-300 plasma cutting machine is distinguished by the use of state-of-the-art technology. The machining process is performed on a water- or other coolant-filled table with a large work area. This solution eliminates the need for filtration systems, as well as the need to undertake further secondary processes, such as grinding. Furthermore, to guarantee maximum corrosion protection, all components have been fully galvanised. The offer also includes equipment, consisting of, among others, an intuitive CNC control and an inverter plasma cutter. The CORMAK plasma cutting machine weighs just 700 kg. Technical specifications of the CORMAK KEP 150-300 plasma cutting machine - CNC controller - work table dimensions (L x W): 3010 x 1510 mm  ...

ADIRA BB 3515 servo electric press brake was built in 2018 in Portugal by ADIRA – Metal Forming Solutions, S.A.. The machine, designed for machining workpieces with a maximum length of 1500 mm, is distinguished by the use of many state-of-the-art technical solutions. It thus meets all, even the most intensive challenges of modern business. The ADIRA BB3515 CNC press brake is equipped with a powerful electric drive , developed in Bluedrive technology. Compared to a standard hydraulic system, this drive is free of filters, seals and hydraulic oil. As a result, the machine is much faster, quieter and more environmentally friendly than other presses available on the market. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. Furthermore, ADIRA’s patented HEXA-C design concept minimis ...

CITIZEN M32 V CNC sliding head lathe was built in 2003 in Japan by CITIZEN WATCH CO., LTD. The machine is used for precision 8-axis machining of workpieces of even the most complex geometries. All machining processes, i.e. precise drilling, threading and turning are performed by 2 reliable spindles and tools taken from 3 capacious tool stations. What’s more, the specially designed bed with high thermal stability perfectly reduces the influence of heat, increasing the service life of all components and cutting tools. The offer also includes a wide range of equipment that significantly extends the machine’s machining capabilities and guarantees excellent repeatability of the manufactured parts. This includes e.g. an advanced CNC controller with many useful functions, such as self-diagnosis and program backup. All this makes the CITIZEN M32V swiss-type lathe the best choice for many  ...

XSA100GFQ 100 kW gas generator was built in 2023 in China by Xinsheng An Power Technology (Shandong) Co., Ltd. This unit is indispensable in the event of power cuts or in conditions where there is no electricity supply. The extremely powerful 100 kW motor converts mechanical energy into electrical energy, ensuring uninterrupted operation of machinery and industrial systems. The engine is powered by LPG gas, which significantly extends the life of the engine and is also much more environmentally friendly. In addition, all other components of the unit meet the most important global quality and emission standards. The 100 kW generator weighs 2860 kg. The XSA100GFQ gas generator set consists of the following parts: – WP6D132E300NG engine – XSA 100 alternator – HGM6110 control system with remote control module – charger – battery Technical specifications of the XSA100GFQ  ...

BYSTRONIC ByStar 4400 laser cutting machine was built in 2006 by the Swiss brand BYSTRONIC. The machine, designed for precision cutting and engraving of sheet metal, is an excellent choice for any industrial plant. The machining process is performed using a stable 4.4 kW laser beam, which is generated by a resonator of the highest energy efficiency. As a result, the edges of the machined workpieces stand out for their unprecedented smoothness and lack of unevenness. ByStar 4400 laser cutting machine is offered with a range of equipment, including among others an intelligent CNC control and a KELLER industrial dust collector. The machine has undergone regular inspections and is ready for further use. BYSTRONIC laser weighs 13500 kg. Technical specifications of the BYSTRONIC ByStar 4400 laser cutting machine - CNC controller: BYSTRONIC ByVision - laser power: 4.4 kW (4400 W) - max ...

GEMA GP 100 semi-automatic pallet wrapping machine was built in 2012 in Poland by GEMA sp. z o. o. This highly efficient machine is an indispensable tool in various types of warehouses and logistics centres. This is because it makes it possible to wrap loads with a maximum weight of 1500 kg in stretch film, increasing their safety and stability during transport. The process is performed by the machine semi-automatically. The GEMA pallet wrapping machine weighs 500 kg. We have two of these machines for sale. The price included in this advertisement is for one unit. Technical specifications of the GEMA GP 100 stretch wrapping machine - maximum wrapping height: 2200 mm - maximum load diagonal: 1650 mm - maximum load weight: 1500 kg - maximum film roll diameter: 270 mm - film thickness: 7-30 μm - rotary table height: 70 mm - rotary table positioning accuracy (with 1000 kg load) ...

OKUMA MA-50 HB CNC horizontal machining center was built in 2000 by the Japanese corporation OKUMA. The machine, designed for advanced machining of workpieces with a maximum weight of 800 kg, is distinguished by its high reliability, efficiency and precision. The machining process is performed fully automatically by means of a high-speed spindle and cutting tools taken from a 40-position magazine. What’s more, the automatic pallet exchange system allows for simultaneous loading and unloading of workpieces during the machining process, reducing machine downtime to a minimum. The MA-50 HB CNC machining center is offered with extensive equipment, including among others a rotary table and an advanced CNC control with an intuitive interface. The total weight of the machine is 21000 kg. Technical specifications of the OKUMA MA-50 HB CNC milling machine - feed in the X/Y/Z axis: 700/800/7 ...

10000/30 shipbuilding plate bending machine is used in shipyards for precision machining of sheet metal with a maximum thickness of 30 mm. Shipbuilding/marine sheet metal is ideal for the manufacture of e.g. ship hulls and offshore platforms, due to its high tensile strength and weather resistance. Ship plate bending machine machine performs the machining process using three rollers. A sheet metal is fed between the upper roller and two lower rollers with their own drive. The pressure rollers above the upper roller exert pressure on the sheet, causing it to curve into the desired shape. The offered 10000/30 shipbuilding plate rolling machine, including the motors, weighs a total of 170 tonnes. Technical specifications of the 10000/30 shipyard plate rolling machine - working length: 10 m - maximum sheet metal thickness: 30 mm - minimum sheet metal thickness: 6 mm - number of rol ...

TBI TC 200-65 MC CNC turning center was built in 2015 in Taiwan by TBI Technology Ltd. The machine, distinguished by its high reliability and extensive equipment, was created as an effective answer to the needs of even the most demanding customers. Workpieces with a maximum diameter of 500 mm are machined inside a large, fully illuminated workspace using a powerful spindle and tools taken from a 12-position turret. Daily work, in turn, is facilitated by a FANUC CNC control with the innovative MANUAL GUIDE workshop programming tool, which reduces the time between drawing up the technical drawing and the actual production of the workpiece. The offer also includes, among others, a hydraulic tailstock and an automatic tool measuring probe. The TBI TC 200/65 MC metal lathe weighs 3200 kg. Technical specifications of the TBI TC 200/65 MC CNC lathe - maximum turning diameter: 210 mm - maxi ...

DURMA AD-SERVO 30175 CNC hydraulic press brake was built in 2016 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. This highly efficient machine is an effective answer to the daily challenges of modern business. The state-of-the-art technology used in it makes it more precise and energy-efficient than other presses on the market. The stress-relieved steel design, combined with economical drives, guarantees excellent bending results, even during the most intensive machining. All this is complemented by the intelligent CYBELEC CNC control with its intuitive interface. The DURMA AD-S 30175 CNC press brake weighs 11500 kg. Technical specifications of the DURMA AD-SERVO 30175 press brake - CNC controller: CYBELEC ModEva 15T - maximum press force: 175 t - maximum sheet metal length: 3050 mm - slider stroke: 265 mm - maximum weight of upper tool: 11 kg - maximum weight of bottom ...

InfoTEC 2515 Energy CNC router was built in 2017 in Poland by 4CNC Sp. z o.o. The machine is designed for the production of precise, repeatable parts made of a wide range of materials, i.e. wood, plastics and light metals. Its versatility and cost-effectiveness make it an excellent choice for companies with diversified production profiles. Materials are machined on a large work table using a brushless HSD spindle with automatic tool changing (ATC) system. This system allows the use of several tools in a single machining cycle, significantly saving the time required for changeover of the workhead. What’s more, the innovative control system has been integrated with powerful digital AC servo motors to achieve excellent dynamics and feed repeatability. The InfoTEC 2515E CNC milling machine weighs approximately 2200 kg. Technical specifications of the InfoTEC 2515 Energy milling machi ...

DEMAG ERGOTECH EXTRA 80-430 injection moulding machine was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and sizes, using the injection moulding method. This method involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, guarantee high repeatability of the manufactured parts. The DEMAG ERGOTECH 80-430 EXTRA injection moulding machine weighs 3600 kg. Technical specifications of the DEMAG ERGOTECH EXTRA 80-430 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 40 mm - screw length/diameter ratio: 20 L/D - maximum injectio ...