used 15 for sale

Machine type: EVP 1500 Manufacturer: ERBA Power kW: 11 Total volume: 1500 lt. Description: The EVP 1500 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has a fully automatic PLC process control (optional) and, on request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without oblig ...

Shrink tunnel Manufacturer: Diez Type: HTC3822 Year of manufacture: 2018 New machine, no operating hours! Width: 38 cm Inlet height: 22 cm Passage length: 130 cm External dimensions: 130 x 80 x 150 cm

Differential pressure gauge, A2G-15, -50/0/50Pa, Wika, mint condition -30% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Differential pressure gauge, A2G-15, -50/0/50Pa, Wika, - Output 4-20mA - Max. Pressure 20kPa 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court ...

High-precision laser cutting machine with 1500 watt laser power Trade fair demonstration machine, with minimum operating hours (approx. 50 hours) We would be happy to demonstrate the machine to you at our premises. Travel distance approx. 1000 x 800 mm - For high-precision cutting of metal - Optional, cnc-controlled decoiling device available - Everything is fully installed and adjusted - Cutting software in German - incl. nesting module - Switch on and get started - Laser source from Max Photonic with 1500 watts of power - Cutting head from Raytools - Cutting stainless steel up to 6mm - Cutting steel up to 15mm - Cutting of aluminium up to 6mm - cutting brass up to 3mm - Heavy industrial quality - Complete system / ready for immediate use - LED work area lighting - 200mm pipe connection for smoke extraction - Incl. extraction f ...

Fiber Laser Welding Machine with 2000 Watt Laser Power - Top device at a top price from our exhibition - approx. 20 operating hours - 2kW laser source from MaxPhotonik - German menu navigation - Universal device for welding/cutting/cleaning - Incl. 4-roll welding wire feeder - Integrated water cooling -at call Machine dimensions approx.: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg ------------------------------------------------------------------------------------------------------------------------ #Lasermarkieren #Lasergravur #Laserschneiden #Wasserstrahlschneiden #Laserbeschriftung #Gravur #Geschenk #Glasgravur #Werbeartikel #Holzgravur #Geschenkidee #Typenschilder #Alugravur #Ledergravur #Glasschneiden #Pulverbeschichten #Pulverlack #Entlacken #Laserentlackung #Laserreinigung #Laserstrahlreinigung #Lasern #Gewindeschneiden #Abkanten #Kanten  ...

Laser welding machine with 200 watt laser power - incl. 4th axis (axis of rotation) - For cylindrical welding tasks - Lamp-pumped YAG laser - Point welding machine for the finest welding tasks - for jewelry, optics, precision engineering, etc. - Welding spot from 0.1 to 3mm - For practically all metals (steel, stainless steel, silver, gold, titanium, etc.) - incl. optical microscope (10x) - Additional CCD microscope with reticle - Current, pulse width, repetition rate, frequency at the controller adjustable - incl. inert gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200Watt power - External cooling - Power connection 230Volt / 32 Amp. Machine dimensions approx.: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg . . . . . . --------------------------------------------------------- ...

Technical data according to the nameplate: Manufacturer: EMK / Sondermeier Elektromotoren Handels GmbH Type: KHL1G315M-4B3E3KR Engine Number: 71500846002 Power: 132 kW Voltage: 400 V (delta Δ) Current consumption: 241 A Frequency: 50 Hz Speed: 1435 rpm Design: B3 (foot mounting) Degree of protection: IP55 Insulation class: F COS φ: 0.89 Date of manufacture: 08/2022 Place of manufacture: Rain / Germany

Directivity: 100 t Projection: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pushrod speed upwards: 206 mm/s Slide speed downwards: 68 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 3500 x 1650 x 2760 mm Weight: 5500 kg

Type: VTTCK-924-R Charge/load dimensions (W x D X H): 900 x 1200 x 600 mm Charge weight: max. 1000 kg gross Temperature range: 150-1350 °C Heating power: 270 kW Nominated power: 422 kVA Ultimate vacuum: 5 x 10-6 mbar Quenching pressure: max. 6 bar abs

There is a used Delta ice water cooler DKS 250 EF (built in 2019) for sale. The device is fully functional and in very good condition. - Capacity approx. 200 litres/hour cooling water - Cooling approx. 13 – 15 °C below inlet temperature - Temperature: 0.5 – 2°C - 220-240 V, 50 Hz - Net capacity of the container: 90 liters - Works without pressure pump, can be combined with any water mixing and dosing device. -Stainless steel - Can be attached to the wall or in the adjoining room Price on request.

We offer: Pallet racking, new Manufacturer: MAXRAC 261 pitches consisting of: 30 frames, approx. 3,000 x 1,050 mm, colour: RAL 5015 sky blue 116 trusses, approx. 2,700 x CE120 mm, colour: RAL 2004 pure orange 232 Locking pins 60 ground anchors The shelf consists of one basic and 28 cultivation fields. There is space for three pallets next to each other or four pallets on top of each other including floor storage. These are sample photos The trusses have a usable length of 2,700 mm. The permissible shelf load is 2,800 kg (with evenly distributed load), 933 kg per pallet. € 7.676,47 net plus 19 % VAT ex stock 21698 Harsefeld. Price valid only while stocks last. Subject to changes and errors. We are a professional provider – invoice with VAT indicated.

Complete system consisting of a heat exchanger and two industrial pumps by the renowned brand Grundfos. The system is from a previously used industrial setup and is in good technical condition. Technical Details: Heat Exchanger (VDL Delmas): Model: S21A-IS16-46 Year of Manufacture: 2015 Heat Exchange Area: 11.4 m² Heat Transfer Capacity: 622 kW Operating Pressure: 10 bar Flow Rate (Primary Side): 78 m³/h Flow Rate (Secondary Side): 105.6 m³/h Weight: 532 kg Grundfos Pumps: Pump Specifications: Model: CRN90-2A-F-G-E-HQQE Pump Type: Vertical multistage centrifugal pump Material: High-grade stainless steel for durability and corrosion resistance Maximum Flow Rate: 42.5 m³/h Maximum Head (Hmax): 68.9 m Motor Specifications: Model: Grundfos MG160MD2-42FF300-H3 Power (P2): 15 kW Rated Speed: 2920 rpm Protection Class: IP55 Insulation Class: F Weight: 100 k ...

Model: E1546FHWBC-02 Load Capacity: 1500 kg Weight without Battery: 1077 kg Battery Weight: 238 kg Battery: 24V/280Ah Cguueaaktk Lifting Motor Power: 3.0 kW Travel Motor Power: 1.8 kW Year of Manufacture: 2013 This electric forklift is in good condition and ready for use. It is suitable for warehouse and industrial operations. If interested, please contact us and provide your price offers for consideration.

Manufacturer: Siemens Type: 1DQ 4240-6 BA 02-Z Year: 1998 Power (kW): 3200 / 6400 Voltage (V): 953 III Current (A): 1156 (for 3200 kW) Dqkhq7 2348 / 2358 (for 6400 kW) Frequency: 9.33 / 19.97 Hz Protection Class: IP 21 / IP 44 Cooling: 348 m³/h (Water) Standard: VDE 0530 Operating Temperature: 25°C

Model: KSB MTC B 125/7-9.2 Serial number: 9973088585/001000/01 Flow rate: Q = 120.00 m³/h Lifting height: H=151.05 m Rotational speed: N = 1497 rpm Year of production: 2016 Engine Manufacturer: Siemens Engine Model: 1CV3280B/1PC30382DB034HT0 Weight: 570 kg Bearings: DE: 6317-C3 CE: 6317-C3 Protection class: IP55 Efficiency class: IE3 Ambient temperature range: -20°C to ≤ 40°C Dqleyh Electrical: 400 V Δ, 50 Hz, 133 A, 75 kW, 1485 rpm 690 V Y, 50 Hz, 77 A, 75 kW, 1485 rpm 460 V Δ, 60 Hz, 131 A, 86 kW, 1785 rpm 460 V Δ, 60 Hz, 116 A, 75 kW, 1788 rpm

Model: KSB ETANORM G 080-315 G1/NA Serial number: 9972358728 000100 01 Capacity: Q = 85.00 m³/h Lifting height: H=25.00 m Rotational speed: n = 1470 rpm Year of production: 2013 Engine Manufacturer: Siemens Engine Model: 1PC30381DB234CG0 Weight: 71 kg Bearings: DE: 6209-ZZC3 NE: 6209-ZZC3 Protection class: IP55 Efficiency class: IE2 Ambient temperature range: -20°C to ≤ 40°C Electrical: 400 V Δ, 50 Hz, 21.0 A, 11 kW, 1470 rpm 690 V Y, 50 Hz, 12.1 A, 11 kW, 1470 rpm 460 V Δ, 60 Hz, 20.5 A, 12.6 kW, 1770 rpm Dqlezf 460 V Δ, 60 Hz, 18.1 A, 11 kW, 1775 rpm

Pump Model: KSB MTC A 125/3-10.1 10 GS Serial number: 500208735 / 001000 / 02 Dqlexj Capacity: Q = 180.00 m³/h Head: H = 80.09 m Speed: N = 1409 rpm Year of manufacture: 2016 Engine Manufacturer: Siemens Model: 1CV3280B/1LE15033DB034AB4-Z Weight: 570 kg Bearings: DE: 6317-C3 CE: 6317-C3 Electrical parameters: 400 V Δ, 50 Hz, 133 A, 75 kW, 1485 rpm 690 V Y, 50 Hz, 77 A, 75 kW, 1485 rpm 460 V Δ, 60 Hz, 131 A, 86 kW, 1785 rpm 460 V Δ, 60 Hz, 116 A, 75 kW, 1788 rpm Efficiency class: IE3

We are offering two identical compressors from the reputable manufacturer Mannesmann Demag AG, model SE116S, manufactured in 1988. Both units are well-maintained and in good working condition, ready for industrial use. Specifications: Volume flow: 11.2 m³/min Operating pressure: 10 bar Motor power: 75 kW Rotational speed: 1500 rpm Total weight: 1760 kg

Ref.Nr. 00878 Name of the system: Used EHT Press Brakes Tools Manufacturer: EHT Model Year of construction Multiple pallets full of press brake tools This also includes an expensive guide rail that was never used The tools are left over from an EHT press brake, Trumabend S135-30 built in 2006 with a working length of 3050mm List Description EHT Tools Stamp H=240 500KN/m Punch H= 340 max 600KN/m H=340 R1 28° H= 240 R1 28° Length Quantity Quantity 250 7 6 175 2 1 Horn L 1 1 Horn R 1 0 90 2 1 85 2 2 80 1 1 75 0 2 70 1 2 65 0 2 60 1 2 55 1 3 50 1 2 45 1 3 40 0 1 35 1 1 30 1 2 25 1 0 20 1 1 15  ...

Ref.Nr. 00847 Name of the system Used robust cold circular saw Manufacturer: Kaltenbach Model KKS 400 H Year of manufacture 1985 Research: Saw blade diameter diameter: 400mm Cutting diameter: approx. 130mm Stroke: 150mm Total power: 1.8/2.7 kW Weight: 850kg Dimensions approx. 1205 x 1005 x 1705mm Cutting range 90 degrees square 120x120mm Cutting area 90 degrees flat 315x40mm Cutting speed: 10-40m/min Operating Voltage 380V 3~/50Hz Submission date immediately

gebr. Radius and bevel grinding machine FISCHER (BARTH) RFM 320 YOC 2007 Oscillation Tischgr. 1,275 x 300 mm 8 radii adjustable: (R2, 3, 4, 5, 6, 8, 10, 12.5) Bevel grinding device up to 16 mm wide Extraction connection: 60 mm Bracket for feeder Socket for feeder pneumatic belt cleaning Chassis Dimensions 130 x 70 cm Weight: 159 kg approx. 30 sandpaper incl. very good used condition Manufacturer

Eccentric Press Manufacturer: Edelhoff Press type EPR 4 Pressing force 45 to Year of manufacture: 4-1975 Plunger strokes 150 / min. Plunger adjustment 55 mm Stroke adjustment from 10 - 100 mm

Welding system for containers and bends Manufacturer: Cloos Model: CML 1500 3 clamping programs Horizontal Year of Make: 1999 Welding area 150 cm

3,6 Mw plant sale consist from 3 pcs MWM TCG 2020V12 , 50 HZ, 400 V, 1500 RPM units, runs ONLY 22000 hours - ! containerized fully CHP, plug and play. Warranty. All questions to PM sandisbscgroup.eu

Blown Film Extrusion Line: Manufacturer: Reifenhäuser / Troisdorf Type: S 100.060 Connection: 220 / 380 Volt Total connected load: approx. 100 amps Film thickness range: 30 - 80 microns max. winding width: 1200 mm Material: LDPE Extruder: Type: S60 Power: 7 to 28 kw Screw diameter: 60mm Screw length: 25D Max. output capacity: 50 kg/h Drive: Elektra Faurndau GmbH Granulate feed via vacuum conveyor Die head: rotating Type: BSR 100 - 250 mm Die insert: 150 mm and 200 mm diameter Heating capacity: 11.2 kW Cooling ring: Cooling ring inserts: 150mm and 200mm diameter Air volume control, lip adjustment Flattening and pull off device: Adjustable side boards for foil flattening Side gusset insertion device Pull-off rollers Winder: 2 digits - tandem wrapper manual winding shaft insertion device Winding System: Tangential Winder pneumatic roller lifter Max ...

The INFINITY MX chocolate tempering machine has beendesigned specifically to work with inclusions of many different types andsizes, generally up to 10mm. It is fitted with an auger instead of a pumpand has a 75kg tank capacity. The minimum quantity of chocolate requiredwhen tempering is 15 kgs (including 5kgs of seed) if using method 1 below.If using method 2, only 12-13kgs of chocolate is required. Once the chocolateis tempered, the MX will continue to pump until there is only 5kgs of chocolateremaining. With a footprint of 600mm (W) x 660mm (D), the MX requiresmuch less space than a traditional wheel machine or continuous temperer ofequivalent capacity. Chocolate is manually tempered using seed (pre-temperedchocolate in chip form). TECHNICAL SPECIFICATIONS Operating capacity: min 5kgs - max 75kgs Suitable for Inclusions up to 10mm Max flow rate: 700 kgs/hr Operating environ ...

Superior Food Machinery 2CF054424P Corn/Flour Tortilla Sheeter Press & Gas Oven Good condition, low hours. Superior Food Machinery spares no expense when making these tortilla press/ovens. These are designed to work all day everyday for the duration. Model 2CF054424P. Features a Press and Sheeter. Moves the corn or flour tortilla through the gas oven, cooking both sides to perfection. Corn Tortilla Capacity: 200-350 dozen per hour Flour Tortilla Capacity: 90 dozen per hour Dimensions: 92 Long x 29 Wide x 57 High Gas: 300,000 BTUs Electric: 1 Phase/230V/35 Amps Features: Double Corn Tortilla w/ on board Flour Press baking oven Production capacity: Corn 200-350 dozen per hour Production capacity: Flour 90 dozen per hour Baking chamber: 54” long Sheeter head: 4 ½ x 15 rollers Tortilla Press: 12 x 13 ½ platens Baking bands: 3 ea. Slat type Ribbon type b ...

Automatic Granule Pre-made Bag Filler Sealer Seed Pouch Feeding Packing Machine Scope of application: This 3 heads 500g pneumatic particle feeding bag packing machine, which is suitable for rice and millet, cereals, vegetable seeds, cat and dog food, fertilizer feed, nuts and seeds, corn seeds, coffee beans, screws and nuts, hardware accessories, plastic products, electronic raw devices and other particle products quantitative, weighing, filling, sealing Parameters: Name: 500g granule seed feeding bag packing machine Sealing method: Four sided seal Minimum bag size: 913CM Maximum bag size: 1826CM Weighing range: 10-500 grams Packing speed: 5-15 times/min (depending on material) Precision: plus or minus 2g (depending on material) Voltage/power: 220V / 0.85KW (110V can be changed) Machine weight: 167KG Size: 9757175CM (length, width and height)

FOR SALE: Caterpillar G3516H Natural Gas Generator Set – 2MW | 50Hz | 11kV | SR5 Alternator | Complete Power Plant Technical Specifications: Manufacturer: Caterpillar Model: G3516H Condition: Used – Fully Overhauled & Ready to Run Output Rating: 2,000 kW (2 MW) continuous Voltage: 11,000 Volts (11kV) Frequency: 50 Hz Speed: 1500 RPM Fuel Type: Natural Gas Alternator: Caterpillar SR5 – 2500 kVA Hours: Only 52,000 hours since new Overhaul Status: Recently completed – fully tested and operational Location: Western Europe Availability: Immediate For sale is a Caterpillar G3516H gas-powered generator set in excellent condition, offering 2MW of power output at 50Hz and 11kV, powered by natural gas and equipped with a Caterpillar SR5 brushless alternator rated at 2500 kVA. The unit has completed only 52,000 hours since new and has b ...

Rondo Croissant Line Type SCM 50.A10 Year of construction 2017 with foldable infeed table incl. punching tool 3-r 20x15cm Slitters and pressure rollers with mobile wrapping unit - Tested and cleaned - Belts winding unit renewed

Screening machine Metso 15/40-3 Brand: Metso Screening area: 4000 x 1500 mm - 3 deckers Drive: 15 kW electric motor

CNC controller: FANUC FS31iA5 Axes X-axis travel mm: 900 Y-axis travel mm: 800 Z-axis travel mm: 1.020 Rapid traverse m/min: 50 B-axis degrees: 360° (0.001°) Worktable Number of pallets: 2 Table dimensions mm: 630 x 630 Max. workpiece weight kg: 1.200 Spindle Spindle speed rpm: 10.000 Spindle drive power kW: 35/25 kW (15 min/cont.) Spindle torque Nm: 488 Tool system Tool holder: HSK - A100 Tool magazine slots: 97 Max. Tool Diameter: 300 With occupied neighboring places mm: 100 Max. Tool Length mm: 690 mm Max tool weight kg: 30 Cooling Cooling through the Spindle Center bar: 30 Tank capacity: 955 L Equipment Chip conveyor Signal lamp Tool breakage probe Workarea light Air filter unit, for drying and oil separation of the supplied compressed air Internal coolant supply Machine running times Under power: 60.802 Spindle Wor ...

HSE 22-1100 Cleaver Maximum clamping force 23.4t Cylinder stroke 880 mm Gap length maximum 1100mm Split material diameter: 350mm Flow speed 4.3 - 10.5 cm/s Return speed 7.5 cm/s Electric motor Drive power 400V 50Hz 5.1kW LxWxH 1050 x 1550 x 2500mm Weight 297kg G&STÜ-5981022

Metal straightener with reel GSW Schwabe Straightener Straightener Make GSW Schwabe Type RMA 16/74 Machine No. A0463 Year of manufacture 2001 Belt width 160 mm Weight with pallet 360 kg Dimensions 1150 mm x 700 mm x H 1400 mm Unwinding reel Make GSW Schwabe Type LH 1000/1250 Machine No. A0462 Year of manufacture 2001 Diameter 1300 mm Load capacity 1000 kg Weight with pallet 465 kg Dimensions 1300 mm x 800 mm x H 1600 mm

EX-120 L/D:1600/90 Gearbox: Leyond Motor: Gamak, 37 kW, 1475 RPM TCU: None Control Panel: None Transmission: Belt - Pulley Overall Dimensions: 2700 x 1800 x 1500 mm Production: Made in ENGLAND

90 mm Extruders Machine, 2024 Model Gearbox: YRE2430XEİ: 18.67 Motor: Gamak brand, 30 kW, 1470 RPM Transmission: Belt / Pulley Overall Dimensions: 2700 mm / 1500 mm Production: Made in Turkey, 2024

2x ABB Industrial Robot IRB 6600 M2004 (BJ 2008) with Control Cabinet and Teach Pendant Quantity: 2 pieces Model No.: ABB IRB 6600 M2004 Year of Make: 2008 Condition: Used, functional Control: IRC5 Technical data (per robot): Payload: up to 225 kg (depending on the version, typical configuration ~175 kg) Reach: 2,550 mm Number of axles: 6 Repeatability: ± 0.15 mm Net weight: approx. 1,700 kg Installation Type: Floor Mounted Degree of protection: IP54 (standard) Joint speed: up to 140°/s (depending on axis) TCP speed: up to 2.2 m/s Control: ABB IRC5 User Interface: FlexPendant (Teach Pendant) with touch screen

Stow trusses 270 cm , 3000 kg , new product in stock! PNB0413 S355MC Pallet Racking Heavy Duty Racking Industrial Racking High Racking Crossbeam Data: - Length : 270 cm - Height : 13 cm - Width : 5 cm - Shelving system : Stow - Type : Pal Rack NS - Max. load per pair of trusses: 3000 kg with evenly distributed load. - Truss type : PNB0413 S355MC - Incl. locking pins - New goods from stock, immediately available. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 36,00 € net 42,84 € Gross You will receive an invoice with VAT. Transport: Delivery can be made by our partner forwarding company on request, the costs depend on the postcode. Assembly: If required, our trained staff will be happy to assist you in the professional assembly and dismantling of your business equipment. Our recommendation : Let us know your needs... We are happy to help you realize ...

Dexion P90 pallet racks made to order! Heavy-duty shelving, high racking, industrial shelving, shelving immediately from stock Data: - Height : from 4.4m - 9.0m possible - Depth : approx. 110 cm - Length : by arrangement. - Stand in galvanized - Trusses 270 x 10 x 5 cm - Crossbeams in galvanized - Load : 2400 kg shelf load - Used goods from stock Price: Basis for negotiation You will receive an invoice with VAT. Transport: Delivery can be made by our partner forwarding company on request, the costs depend on the postcode. Assembly: If required, our trained staff will be happy to assist you in the professional assembly and dismantling of your business equipment. Our recommendation : Let us know your needs... We are happy to help you realize your projects, from planning to ordering and assembly. Are you interested or have questions? Simply contact us by mes ...

500 pallet spaces with up to 1000kg/piece, 92.50 m Jungheinrich Pallet Racks, Racking System, Heavy-Duty Racks, High Racks, Industrial Racks, Shelves Esmena Data: - Height : from 7.20m to 11.30m - Depth : 105 cm - Length : 92,50 m - Load : 1000 kg per pallet space - Shelf load : 4000 kg - Stand profile : 10 cm x 10.5 cm - Stand in blue - Trusses approx. 360 x 15 x 5.5 cm - Trusses in yellow - Manufacturer : Jungheinrich - Type : Esmena -Second-hand goods Shelf consists of : - 26 x stands approx. (720 - 1050cm) x 105 cm, pre-assembled. - 200 x truss 360 x 15 x 5.5 cm. - 400 x locking pins. - Levels: Ground + 4 - 500 pallet spaces incl. floor spaces. HEIGHT OF THE SHELF UPRIGHTS : We offer you the option of shortening our shelf stands according to your specific wishes. Individual adaptation for your optimal use of space. Available heights : - 5.10 m - 5.80 m ...

General -Ges. Length : approx. 20,480 mm -Ges. Width : approx. 14,328 mm - Height incl. shelf : 5,300 mm Mezzanine - Upper edge of the mezzanine floor : approx. 2,750 mm - Lower edge of mezzanine floor : approx. 2,526 mm - Aisle width main aisle : approx. 1,000 mm - Aisle width intermediate aisles : approx. 1050 mm - Load steel construction platform : 500kg/m² - Load intermediate aisles : 300 kg/m² - Flooring : 38mm chipboard , lower edge white , upper edge natural - Solid substructure - Manufacturer : META Shelving - Length : approx. 6,066 mm - Height : approx. 5,100 mm (continuous) - Width: approx. 500 mm & 600 mm - Width double row : approx. 1,075 mm & 1,175 mm - Load : 100 kg per shelf - Manufacturer : META - Type : Frame TSS , Floor V100 - Year of manufacture : 10/2020 & 5/2015 - All outposts have solid sheet metal at the bottom + top Shelving consist ...

Jungheinrich Esmena trusses 180 cm / 280 cm / 360 cm , used goods from stock! Pallet Racks Heavy Duty Racks Industrial Racks High Racks Crossbeams Data for Truss 180 cm : - Length : 180 cm - Height : 7.5 cm - Width : 4 cm - Shelving system : Jungheinrich - Type : Esmena - Incl. locking pins - Used goods from stock, immediately available. Price: 18,00 € net // 21,42 € gross per pcs. You will receive an invoice with VAT. Data for Truss 280 cm : - Length : 280 cm - Height : 10 cm - Width : 4 cm - Shelving system : Jungheinrich - Type : Esmena - Incl. locking pins - Used goods from stock, immediately available. Price: 25,00 € net // 29,75 € gross per pcs. You will receive an invoice with VAT. Data for Truss 360 cm: - Length : 360 cm - Height : 15 cm - Width : 5.5 cm - Shelving system : Jungheinrich - Type : Esmena - Incl. locking pins - Used go ...

EiMa double cross-cut saw DKS 123 and accessories, built in 2010, very good condition (has been regularly serviced). New price at that time - approx. € 55,000.00 saw, € 15,000.00 accessories Specifications: Manufacturer: EiMa Maschinenbau GmbH, Frickenhausen Type: GKS 123 Type of current: 230/ 400V / 50 Hz Operating voltage: 400 V Control voltage: DC 24V Machine power: 23 kW Rated current: 44 A Dimensions approx. Length: 6.40 meters Width: 5.37 meters Height: 1.10 meters Weight: 2.2 tons The accessories consist of the photos, various replacement profile cutter heads (partly from Leitz-Variform and as good as new in original packaging) etc. The double deflection saw is currently still at our customer in Gerolstein and was taken out of service on 23.10.2024 - due to a restructuring. Only the offered machine and accessories are expressly sold, any things th ...

Control Siemens Sinumerik 840D Travel X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 40 Wkz., SK 40 Paper filter Conveyor

Code: 0655 Brand: STRIEBIG - SWITZERLAND Model: STANDARD III 6220 - CE Standard Mnaual vertical panel saw for cutting wood panels, plywood, furniture, composite materials, plasterboard, sandwich panels, plastics, aluminium and various materials - CE Standard Technical characteristics: Machine frame with 40 welded cross beams and therefore very rigid Support on 17 rollers and three brake pedals for sliding panels Extremely stable motor column Compact vibration-free saw unit Integrated strip stop for repetitive cuts Sturdy pressure pad for material clamping and perfect suction on the front side Easy rotation of blade unit Support for small panels Reference stops Technical data: Cutting dimensions mm 5300 x 2200 Horizontal height cutting mm 2100 Cutting depth mm 80 Blade diameter mm 300 F 30 Blade speed 4750 rpm Motor power Kw 5,5 ( Hp 7,5) Installed power Kw 7  ...

Code: 0409 Brand: THEOREMA Model: BR 3000 SPECIAL - CE Standard CNC boring and pantograph working centre with 3 controlled axis for furniture, kitchens, bathroom furniture, panels, doors and miscellaneous - CE standard Technical data: Minimum overall dimensions Useful length X axis mm 3000 Useful length Y axis mm 1300 X axis speed mt/min 24 Y axis speed mt/min 24 Z axis stroke mm 65 Max panel thickness mm 65 Boring unit with n° 18 spindles - Right-left drill chuck diameter mm 10 - Rpm 4000 Pantograph with pneumatic tool release - Motor Hp 7,5 - Rpm 0/18000 - Inverter for spindle Kw 5,5 Nesting worktable Suction cups mm 150 x 150 Rapid panel positioning Optimisation of the drilling path Specularity of drilling and milling cycles Interpolation on three X-Y-Z axis Vacuum pump cubic metres 100 Compressed air atm 6 Overall dimensions: mm 4400 x 1700 x 2400 h Weigh ...

Code: 0090 Brand: BIMATIC - ITALY Model: MASTER 12 - CE Standard Single-sided automatic edge bander with grinding unit for applying edges in wood, veneer, abs, pvc, melamine, roll materials for joinery, furniture, custom furniture, kitchens, bathroom furniture, panels and various - CE Standard Technical data: Edge thickness mm 0,4 - 12 Panel height mm 8/60 Min panel width mm 70 Min panel length mm 60 Glue pot capacity lt 4 Heating time 5 minutes Working speed mt/min 10-15 Automatic upper presser lift Protection booth Telescopic support roller conveyor for supporting large panels Control panel with operating system by microprocessor - Double digital thermostat controller - Emergency light - Operating controls for all the electropneumatic units Entrance fence with electropneumatic movement synchronized with the premilling unit Premilling unit in entry for perfect edge ...

Code: 0040 Brand: BREVETTI MOTTA - ITALY Model: VELOX - CE Standard Pneumatic joining machine for wooden frames and Mdf , of furniture, doors, windows and various - CE Standard Technical data: Joining unit NR Workable rod dimensions: Max width mm 120 - Max height mm 70 - Min width mm 5 - Min height mm 5 Possible hourly production 150/200 finished frames Compressed air 6 bar Overall dimensions mm 500 x 680 x 1250 h Weight kg 75

Code: 0427 Brand: ILMETECH Model: I 12 - 065 Automatic knife grinding machine for planer knives, knife blades and rectilinear tools - CE Standard Technical data: Suitable for grinding of HSS steel as well as carbide tools used in the woodworking, paper, leather, plastics, metal and food sectors Max working length mm 650 Tilting grinding motor unit Grinding wheel motor power kW 1,15 Grinding wheel external diameter mm 125 Grinding wheel feed per stroke mm 0-0,05 Two-speed carriage feed mt/min 6/12 Coolant pump capacity lt/min 0-30 Overall dimensions mm 1450 x 550 x 1300 h Weight kg 186

Powertec 2 Easy Burn Quick Programming Work tank Design: Lifting container Dimensions LxWxH: 650 x 500 x 340 mm Dielectric height (programmable): max. 300 mm Working head max. head load 100 kg min distance electrode system - work table 135 mm max distance electrode system - work table 535 mm Integrated C-axis Pressure Adjustable: 1-20 1/min Measurement resolution: 0.001° Load capacity one. Electrode replacement: 50 kg Load-bearing capacity autom. Electrode replacement: 15 kg Workbench Area LxW: 550 x 470 mm Load capacity: 500 kg Travel inside working container: X= 420, Y= 300, Z= 400 mm with electrode change and loading position: Y= 580 mm Control PC-NC dialog: 2x32 bit Drive type: digital AC servo motors Travel speed X,Y,Z: 5,000 mm/min High Speed Jump: 18,000 mm/min Dielectric supply Filter system design: cartridges (integrated) Filter area: 16 ...