used 15 for sale

WDE MASPELL TVS ROLL 1.8 E 8 L vacuum kiln was built in 2015 by the Italian company WDE MASPELL S.r.l.. The machine is used for the heat treatment of solid wood, in the form of planks or pre-cut pieces with a maximum length of 8 metres. The innovative vacuum technology, compared to traditional methods of impregnating wood, reduces treatment times by up to 50%, while also reducing emissions of harmful substances into the environment. High temperature combined with vacuum improves the intrinsic properties of the wood by changing its chemical structure. As a result, the wood elements take on a very dark colour and, most importantly, become harder and more resistant to external influences, i.e. moisture or fungi. The TVS ROLL 1.8 E 8 L vacuum wood dryer is also suitable for fumigation, i.e. the process of insect removal. All thermal processes are optimised for maximum heat utilisation. Th ...

SAIP SE 15 polyurethane foam dispensing machine was built in 2015 in Italy by SAIP Equipment. The machine is used in the dispensing of all kinds of polyurethane foams in environmentally friendly conditions. The combination of high capacity (up to 15 kg/min) and the ability to adjust the mixing ratio of the components from 1:1 to 5:1 means that the machine can easily meet any production requirement. The SAIP polyurethane foam mixing machine is also incredibly easy to operate. Operating parameters can be entered and controlled from the reliable touchscreen control system. The PUR dispensing machine is fully complete and consists of the following components: – control panel – low-pressure mixing head – mixing head support beam – isocyanate and polyol storage and conditioning unit – isocyanate and polyol metering unit – mixing head solvent washing system Technical spe ...

OMERA OPI 250 double column press was built in 2000 in Italy by OMERA S.r.l. The machine, designed for, among others, precision stamping, bending and punching, is the perfect solution for the mass production of parts from sheet metal and strips. All these machining operations are performed by a large-area slider operating at a force of 250 tonnes. The compact, rigid gantry design significantly reduces deflection under full load, as well as allows for operation with advanced punches and dies. The equipment also includes pressure cushions and SICK light curtains, which automatically switch off the machine’s power supply if the laser beam is interrupted. The OMERA OPI 250 NF/2 press weighs 24000 kg. Technical specifications of OMERA OPI 250 hydraulic press - maximum press force: 250 t (2500 kN) - maximum pressure cushion force: 100 t - minimum pressure cushion force: 10 t - work ta ...

AVIA VMC 1000 CNC machining center was built in 2017 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A.. The machine, distinguished by its extensive machining capabilities and state-of-the-art technical solutions, will meet any, even the most demanding challenges. Workpieces with a maximum weight of 1000 kg are machined by an extremely fast spindle with thermo-stabilisation, which, combined with precision cutting tools, guarantees excellent milling results. On the other hand, the machine’s high-quality construction with sliding doors offers maximum stability in machining by effectively eliminating any vibrations generated during milling. The AVIA CNC vertical machining center is offered with an extensive range of equipment, including toolholders, digital axis servo drives and the intuitive SIEMENS numerical control with ShopMill 3D overlay. The total weight of the machine is 5300 k ...

DECKEL MAHO DMU 60P CNC machining center was built in 1999 in Germany by DECKEL MAHO GmbH. The machine with its extremely sturdy construction was designed for the most intensive 5-axis workpiece machining. Inside the large working area, there is, among others, a 24-position tool magazine and an electro-spindle, which rotates at a maximum speed of 12000 rpm. All of this is complemented by an advanced HEIDENHAIN CNC control with an intuitive interface, where machining programmes are created in just a few steps. The DECKEL MAHO milling center has had only one owner to this date. Technical parameters of the DECKEL MAHO DMU 60P milling center - number of axes: 5 - feed in the X/Y/Z axis: 600/650/550 mm - maximum electro-spindle rotational speed: 12000 rpm - minimum electro-spindle rotational speed: 20 rpm - electro-spindle drive power: 15 kW - tool holder: SK-40 - operating hours: 7 ...

STILL EXV-SF 14 electric pallet stacker was built in 2023 by German company STILL GmbH. This extremely versatile vehicle allows you to control the flow of goods in your warehouse, from transporting loads in the goods receiving area to handling high-bay racks. The maximum load capacity of 1400 kg, combined with the intelligent speed reduction in corners, ensure maximum safety in transporting loads in even the most confined spaces. When the stand-on platform and side lateral protection arms are extended, the maximum speed without load can reach up to 10 km/h. The machine’s structure has been designed for maximum operator comfort. The pneumatically cushioned stand-on platform, which can be adjusted to the operator’s weight, protects the back from strain over long distances. Precise controls have been adapted to both right- and left-handed operators. On top of this, the operator has a ...

ELUMATEC SBZ 618 machining center was built in 2014 in Germany by Elumatec AG. The machine enables fully automatic machining of profiles made of steel, aluminium and PVC. Its excellent machining parameters and high precision make it an excellent choice for businesses associated with e.g. window or door manufacturing. The profiles are cut by a reliable saw with a 550 mm diameter and with an angle adjustment range of -22.5° to +22.5°. The machining unit is also equipped with a reliable spindle for milling and hole-making. The ELUMATEC profile machining center is offered with a wide range of equipment, including a magazine capable of accommodating 10 profiles as well as a barcode scanner and label printer. The total weight of the machine is approximately 5500 kg. Technical specifications of the ELUMATEC SBZ 618 profile drilling and cutting center - maximum workpiece length: 4000 mm - ...

JAFO FWF 32J universal milling machine was produced in 1990 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine designed for precision machining of workpieces is characterised by high functionality, versatility and reliability. The machine body, built from high quality cast iron, is equipped with, among others, a pull-out beam with its own drive and a table with a large working area. The reliable vertical torsion spindle works with a range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32J vertical milling machine weighs 2800 kg. Technical data of the JAFO FWF 32J milling machine - feed in the X/Y/Z axis: 900/300/450 mm - work table surface (L x W): 1250 x 315 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam with drive - workplace illumination - installed power: 12,5 kW - ...

FMB JUPITER band saw was manufactured in 2000 in Italy by FMB s.r.l.. The machine, designed for precision cutting of workpieces, is an indispensable tool in any production facility. The machining process is performed fully automatically by means of a high quality 3180 mm long saw blade, which is driven by a powerful electric motor with an stepless gearbox and transmission wheel. The robust design also eliminates any vibration generated during machining, guaranteeing exceptional stability, even during the most intensive production work. In 2024, the FMB automatic band saw underwent an upgrade, during which the control panel was replaced with a new one. The FMB JUPITER bandsaw weighs 1150 kg. Technical data of the FMB JUPITER metal band saw - cutting angle: 0°-60° - cutting capacity (0⁰, circle): 240 mm - cutting capacity (0⁰, square): 240x240 mm - cutting capacity (0⁰, rect ...

TRUMPF TruLaser 5030 L68 fiber laser was built in 2017 in Germany by Trumpf GmbH + Co. KG. The machine, designed for precision machining of sheet metal made of structural steel, stainless steel and aluminium, is offered with state-of-the-art components and extensive equipment. These include a resonator with the highest energy efficiency, which generates a stable 3 kW fibre optic beam. The mobile, adaptive lens system located in the universal cutting head ensures optimum beam geometry for different sheet thicknesses and materials, resulting in the highest cutting quality at maximum feeds. In addition, special systems incorporated in the machine allow for the machining of waste material. The laser power is regulated analogously to the feed rate on the advanced SIEMENS SINUMERIK 840D SL CNC control. What’s more, the workshop programming integrated into the control system allows program ...

MECHANIC SYSTEM GM6VW industrial air filtration system was built in 2014 in Poland by Mechanic System Sp. z o.o. The machine is used in air filtration from dry impurities generated during various technological processes. Thanks to the use of patron filters with a large filtration area, the machine achieves an efficiency of up to 99.999% in class M, enabling recirculation of cleaned air back to the production hall. Dust accumulated on the surface of the patron filters is cleaned automatically by pulses of compressed air during machine operation. Moreover, the vertical positioning of the filters increases their vitality and significantly reduces operating costs. The MECHANIC SYSTEM GM 6VW dust collector has a fan installed directly on the filter chamber and is offered together with a controller and existing piping. Technical specifications of the MECHANIC SYSTEM GM6VW dust extraction un ...

LDG-3000 KOMBI granulation line built in 2022 by the Polish company TechnoMaszBud is an extremely productive and energy-efficient machine, designed for the production of wood pellets and granulation of livestock fodder. By equipping the machine with high-end components, raw materials such as wood waste, sawdust or straw are fully automatically processed into a finished product. In this way, the problem of waste disposal in the carpentry and sawmill industry can be solved while at the same time making a profit. Throughout its lifetime, the LDG-3000 KOMBI 25 kW pellet line has seen very little use. The TechnoMaszBud pellet production line is fully complete and has the following components: – SA-400 aerodynamic sawdust dryer – PT-1000 conveyor belt with fans – WP-600+ weighing and bagging machine – ZW-500 impulse bag sealing machine Technical specifications of the LDG-3000 ...

KT7 CNC KTP 300-150 plasma cutting machine was built in 2016 in Poland. The machine, designed for machining workpieces with a maximum thickness of 32 mm, has a stable waterbed table that ensures clean cutting, material cooling and reduces gas emissions during machining. Workpieces produced in this way stand out for their excellent precision and do not require other secondary processes to be undertaken. In addition, the machine’s compact design and all its components have been hot-dip galvanised and powder-coated to prevent rust and guarantee trouble-free operation throughout its lifetime. The equipment includes among others CAM software and a powerful plasma source HYPERTHERM. The KTP 300-150 plasma cutting machine weighs 800 kg. Technical specifications of the KT7 CNC KTP 300-150 plasma cutting machine - maximum sheet metal thickness: 32 mm - maximum sheet metal weight: 2000 kg  ...

AGIE AGIECUT CLASSIC 2S wire EDM machine built in 2004 in Switzerland is used for the production of, among others, precision dies, tools and punches. Workpieces with a maximum weight of 450 kg are machined using electrical erosion, which can achieve complex shapes in even the hardest materials. This process is performed in a dielectric-filled work tank using a wire with a maximum diameter of 0.33 mm, which is threaded through a special AGIEJET system. The workpieces machined in this way do not require any other secondary processes such as polishing to be undertaken. The AGIECUT CLASSIC V2 wire EDM machine also features an intuitive CNC control with many useful functions. It is possible to purchase the dedicated cooler shown in the photos at an additional cost – price negotiable. The AGIE EDM machine weighs 2580 kg. Technical specifications of the AGIE AGIECUT CLASSIC 2S EDM machi ...

BAYKAL HNC 4110 hydraulic guillotine shears built in 2019 in Turkey are designed for precision cutting of workpieces with a maximum thickness of 10 mm. The machining process is performed by extremely precise cutting knives with adjustable gap between blades. The all-steel construction combined with a powerful hydraulic system additionally ensure the highest stability and machining performance. The BAYKAL HNC 4110 guillotine shears have been in use for a small amount of time – so far they have worked only 560 hours. The total weight of the machine is 15400 kg. Technical specifications of the BAYKAL HNC 4110 guillotine shears - HMI panel: SIEMENS SIMATIC HMI - maximum sheet metal length: 4060 mm - maximum sheet metal thickness (Rm

STIGAL VXstandard plasma cutting machine, manufactured in 2010 in Poland, is used for precision cutting of workpieces with a maximum thickness of 57 mm. The open design with a very robust portal enables free sheet metal loading and guarantees exceptional stability during even the most demanding challenges. The entire workspace is covered by an extraction table with the ECTS system, which effectively levels the contamination generated during machining and ensures comfortable working conditions. All of this is complemented by an intuitive CNC control installed in the operator’s touchscreen control panel, allowing for machine control and control of all cutting process parameters. The STIGAL plasma cutting machine has also been retrofitted with an OB-R 400 rotator, which extends the machining range to tubes with diameters from 40 to 400 mm. Technical specifications of STIGAL VXstandard  ...

METALLKRAFT ULMS 420 metal circular sawing machine was built in 2019 in Germany. This extremely powerful machine is the perfect solution for precision cutting of profiles made of light metal, aluminium, plastic or wood at an angle between -45° and +45°. This is all thanks to the reliable cutting disc with a diameter of 420 mm, whose feed is adjustable steplessly. This is what gives the workpieces a smooth surface without any burrs or distortions. The machine also features a special economical lubrication system that continuously lubricates all moving parts, ensuring reliable operation for a long period of time. The offer price includes equipment, consisting of spare cylinders, special custom-made discs for cutting aluminium and a powerful WALTER piston compressor. The ULMS 420 semi-automatic circular sawing machine weighs 199 kg. Technical specifications of the METALLKRAFT ULMS 420  ...

YCM FP100A CNC machining center was built in 2014 in Taiwan. Equipped with state-of-the-art technology and components from renowned brands, the machine is used for precision 3D machining of heavy workpieces weighing up to 1000 kg. During machining, the reliable spindle built in IDD (Isolated Direct Drive) technology moves on roller guides from Japanese company IKO, which minimises the effects of bending torque and also ensures high positioning accuracy. In addition, the use of precision ceramic bearings guarantees quiet operation and long life of the spindle. The FP100 A milling center is offered with a comprehensive range of equipment, including a 30-position magazine with automatic tool changing and an intuitive CNC control by HEIDENHAIN. The controller’s excellent optimisation and multitude of functions significantly simplify operation and enable advanced machining programmes to  ...

BLM-ADIGE JUMBO LT14 tube laser cutting machine was built in 2014 in Italy by BLM S.p.A. The machine’s high versatility and extensive machining capabilities make it the perfect choice for precision machining of tubes, open profiles, I-beams and special profiles of large dimensions. It will significantly reduce the cost of producing a single component and improve the quality of cutting compared to other technologies available on the market. The BLM-ADIGE LT JUMBO 14 3D tube laser cutting machine performs machining fully automatically, without the need for retooling or manual adjustments. Once the workpieces have been fed in, the loading unit with conveyor system segregates them according to cross-section, diameter and length. The workpiece is then moved towards the work area, where it is held by three special spindles that eliminate uncontrolled movements and guarantee more precise,  ...

FADAL VMC 3016 CNC machining center, built in 1994 in the United States is used for precision machining of workpieces with a maximum weight of 453 kg. The machine, distinguished by its extensive machining capabilities and high productivity, has a large, fully illuminated workspace with a powerful spindle and a 21-position tool magazine. The movement of the X, Y and Z axes along precise guideways results in excellent dynamic and repeatable feed rates. This is completed by an intuitive CNC control with many useful functions, in which machining programmes are created in just a few steps. The VMC 3016 CNC vertical machining center weights 3765 kg. Technical specifications of the FADAL VMC 3016 CNC milling machine - CNC controller: FADAL CNC 32MP - feed in the X/Y/Z axis: 760/400/500 mm - rapid traverse in the X,Y axis: 18 m/min - rapid traverse in Z axis: 15 m/min - cutting speed in  ...

TRUMPF TruLaser 5030 fiber laser was built in 2015 in Germany by Trumpf GmbH + Co. KG. The machine, which is designed for precision machining of sheet metal made of among others structural steel, copper and aluminium, is characterised by the use of state-of-the-art technical solutions that significantly affect the cutting quality and expand the machine’s machining capabilities. Laser cutting is performed by means of a stable fibre-optic beam with a maximum power of 5 kW, which is flexibly guided from the resonator to the cutting head with an adaptive lens system. This system ensures optimum beam geometry for different sheet thicknesses and materials, resulting in the highest cutting quality, at maximum feed rates. In turn, the laser power is regulated analogously to the feed rate on the intuitive SIEMENS SINUMERIK 840D SL CNC control. The workshop programming integrated into the con ...

ATMSolutions ATMS 1325 CNC milling machine built in 2017 in Poland is designed for the production of both small and large parts made of e.g. aluminium, plastic or wood. Distinguished by its state-of-the-art solutions, the machine performs the machining process on a large vacuum table using a powerful, water-cooled spindle. The steel frame, by increasing the overall rigidity, makes it possible to achieve unprecedented precision and accuracy in machining, removing any vibration and deformation. In addition, the X and Y axes are equipped with trapezoidal guides with gear drives with bevel teeth, thanks to which excellent dynamics and feed repeatability are achieved. This is complemented by an intuitive CNC control with professional CAM software that supports G-CODE and .nc commands. The ATMS 1325 CNC milling machine weighs 1000 kg. Technical specifications of the ATMSolutions ATMS 1325 m ...

COLCHESTER TORNADO 100 CNC turning center built in 1995 in England is used for precision machining of workpieces with a maximum diameter of 420 mm. The machine features a large, fully illuminated workspace with a 12-position turret and an extremely powerful spindle. The 60° inclined bed ensures remarkable process stability, even during the most intense challenges. This is completed by the intuitive CNC control in which all machining programmes are created in just a few steps. The TORNADO 100 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 100 metal lathe - CNC controller - HMI panel: VILUX - feed in the X/Z axis: 180/350 mm - rapid traverse in the X/Z axis: 10/15 m/min - turning diameter over bed: 420 mm - turning diameter over slide: 297 mm - maximum turning diameter: 186 mm - maximum turning length: 350 mm - maximum spindle rotational speed: 60 ...

KT7 CNC KSP 150-300 SPEED plasma cutting machine was manufactured in 2019 in Poland. The machine, designed for precision machining of workpieces with a maximum weight of 4 tonnes, is an excellent choice for small businesses as well as for large industrial plants. Its compact design and all components have been fully galvanised to prevent rust and guarantee trouble-free operation throughout its lifetime. The SPEED KSP 150-300 plasma cutting machine is also equipped with, among others, a WALTER refrigeration dryer and many useful systems that increase precision and production efficiency. The total weight of the machine is 850 kg. Technical specifications of the KT7 CNC KSP 150-300 SPEED plasma cutting machine - work table dimensions (L x W): 3000 x 1500 mm - maximum sheet metal weight: 4000 kg - feed range in Z axis: 110 mm - travel speed: 25000 mm/min - working speed: up to 10000  ...

COLCHESTER TORNADO 110 CNC turning center was built in England in 1998. The machine, designed for precision machining of workpieces with a maximum diameter of 420 mm, features a fully illuminated work space that includes among others a 12-position turret and an extremely powerful spindle. The inclined bed by 60° ensures excellent stability of the process, during even the most intense challenges. On top of this, the intuitive GE FANUC Series 21i-T CNC control allows advanced machining programmes to be created in just a few steps. The TORNADO 110 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 110 metal lathe - CNC controller: GE FANUC Series 21i-T - feed in the X/Z axis: 310/416 mm - rapid traverse in the X/Z axis: 15/20 m/min - load on the X/Z axis: 2.51/3.77 kN - turning diameter over bed: 420 mm - turning diameter over slide: 280 mm - maximum tur ...

AVIA AVIATURN 35 CNC turning center was built in 2022 in Poland. The machine, designed for precision machining of workpieces with a maximum diameter of 350 mm, has been equipped with many state-of-the-art solutions and high-quality components that ensure excellent turning results. The workspace includes, among others, a 12-position turret and a reliable spindle driven by a belt drive with encoder. The AVIAturn 35 CNC lathe is also distinguished by its richly ribbed, single-piece cast iron bed. The bed, which is inclined at 35°, effectively dampens all vibrations and oscillations, resulting in, among others, improved workpiece surface quality and increased cutting tool life. The machine’s extensive equipment includes, among others, a hydraulically movable tailstock, a tool probe and a SIEMENS CNC control in its most powerful version with a wide range of built-in fixed cycles and 16  ...

SZKŁOMAL SW 1600 V vertical glass washing machine was built in 2020 in Poland. The machine designed for washing glass after machining with maximum dimensions of 1600 x 3210 mm has, among others, 2 pairs of washing brushes, out of which the front pair is made of a special fibre for soft coatings. Once the process is complete, the glass format is dried by a water heating system with hot air thermo-circulation. The system ensures high drying efficiency with low energy consumption at the same time. In addition, one of the machine’s greatest strengths is its ability to operate at very low temperatures on the production floor. The SZKŁOMAL SW1600 flat glass washing machine weighs 2750 kg. Technical data of the SZKŁOMAL SW 1600 V flat glass washing machine - maximum glass size: 1600 x 3210 mm - minimum glass size: 350 x 100 mm - washing brushes (2 pairs) - air knifes - water heatin ...

BLM DYNAM 3 CNC tube bending machine was built by BLM S.P.A. in Italy in 1999. Distinguished by its high productivity and bending accuracy, the machine is an indispensable tool in any production facility. The applied technical solutions and reliable components make it possible to perform fully automatic, serial bending of profiles and tubes with a maximum diameter of 60 mm. All process parameters are entered on an intuitive CNC controller with many functions that facilitate the programming of even the most complex shapes in just a few steps. Throughout its lifetime, the DYNAM 3 mandrel bending machine has been regularly serviced. The total weight of the machine is 5070 kg. Technical specifications of the BLM DYNAM 3 CNC tube and profile bending machine - CNC control system: BLM FNC 2000 R - maximum tube diameter: 60 mm - tool set for bending tubes Ø 25 mm - lubricant pump: FLENCO ...

KRAUSS MAFFEI KM 300-1900 C1 injection moulding machine was built in 2007 in Germany by KraussMaffei Group GmbH. The machine, which is distinguished by its reliability and high performance, is used for the mass production of plastic parts of various colours, shapes and sizes. The parts are produced using the injection moulding method, in which the plasticised material is clamped with high press force. The process involves, among others, a high-precision mould clamping system operating at a force of up to 300 tonnes and a WITTMANN robot. The parts produced in this way are characterised by high repeatability, durability and precision. The KM 300-1900 C1 injection moulding machine weighs approximately 15 tonnes. Technical specifications of the KRAUSS MAFFEI KM 300-1900 C1 injection moulding machine - maximum clamping force: 300 t - screw diameter: 60 mm - maximum injection pressure: 2 ...

HAAS UMC-750SS CNC vertical machining center built in 2018 in the United States is used for precision machining of complex workpieces with a maximum weight of 300 kg. The machine features a large work area which includes a direct-drive spindle, a 500 mm diameter rotary tilting table with a precision pilot hole and a measuring probe from the renowned RENISHAW brand. In addition, each tool taken from the 40-position magazine is continuously measured to ensure continuity of the machining process. The UMC-750SS CNC machining center is offered with extensive equipment, which includes e.g. a belt chip conveyor and a perfectly optimised HAAS NGC CNC controller with many useful functions. To this date, the machine has run a small amount of time and has been used for prototyping, tooling production and small batch machining. The HAAS UMC 750 SS milling center weighs 8200 kg. Technical speci ...

KUKA KR 20 R1810-2 industrial robot was built in 2023 in Germany by KUKA AG. Purchased in December 2023, the machine is brand new, under manufacturer’s warranty and packed in the original boxes. The boxes have never been opened. This KUKA KR 20 R1810-2 6-axis robot, which is part of the KR CYBERTECH series, is used in the automation of processes such as workpiece machining, workpiece handling, assembly, palletising and welding. The machine is protected against uncontrolled electrostatic charging or discharging, making it also suitable for the safe handling of sensitive electronic components. Its slim design with an extremely robust arm with an increased range of movement ensures freedom of operation in all positions, even in hard-to-reach areas. Optimised controller structures offer smooth and precise travel, both on the track and during positioning. In addition, each of the 6 axes  ...

SAMAG MFZ 2-2 CNC milling machine was built in 2005 in Germany. This specially designed machine for the automatic machining of workpieces made of metallic materials has been equipped with two high-performance spindles and two work tables with a rotary axis, allowing for simultaneous machining of a part and loading/unloading of another. This solution maximises production efficiency and shortens production times, making the machine significantly distinguishable from other milling machines on the market. The machining, characterised by high quality and precision, is performed in automatic mode or in the setting up mode, using rotary tools taken from a capacious magazine. During its service life, the SAMAG twin-spindle milling machine has worked around 40000 hours and has been continuously serviced. The total weight of the machine is approximately 22 tonnes. Technical specifications of ...

DMG MORI CMX 1100 V CNC machining center was built in 2019 in Japan by DMG MORI CO.,LTD. The machine, designed for machining workpieces with a maximum weight of 1000 kg, is distinguished by the use of state-of-the-art components and technical solutions which guarantee excellent machining results for many years of continuous operation. The machining process is performed inside a fully illuminated workspace by means of reliable components in the form of cutting tools and a high-speed spindle. The ‘C’ shaped cast iron bed perfectly dampens any vibrations and oscillations generated during machining, while ensuring the highest possible process stability. The CMX 1100 V CNC vertical machining center on offer also has a wide range of optional equipment, consisting of, among others, measuring probes from the renowned RENISHAW brand, a divider and the advanced MAPPS FANUC CNC control. Over ...

HAAS EC-1600ZT CNC machining center was built in 2020 in the United States by the renowned brand HAAS AUTOMATION INC. Designed for machining of heavy workpieces weighing up to 4536 kg, the machine is the ideal combination of functionality, productivity and precision. In order to meet this challenge, the machine is equipped with a wide range of equipment such as a rotary table (4th axis), a two-stage spindle and a capacious magazine with automatic tool changer. The HAAS EC 1600ZT CNC horizontal machining center has only been in operation for 3 minutes so far. The total weight of the machine is approximately 13472 kg. Technical specifications of the HAAS EC-1600ZT milling center - feed in the X/Y/Z axis: 1626/1270/1016 mm - feed in the B axis: 360° - rapid traverse in the X,Y,Z axis: 15.2 m/min - work table surface (L x W): 1626 x 914 mm - clamping plate diameter (rotary table): 7 ...

YCM FP66A CNC machining center was built in 2013 in Taiwan. The machine, equipped with components from renowned brands and state-of-the-art technology, is used for precision 3D machining of workpieces with a maximum weight of 500 kg. The machining process is performed by a powerful spindle, rotating at a maximum speed of 16000 rpm, and cutting tools taken from a 30-position magazine. The spindle moves in the X,Y,Z axis on roller guides of the Japanese company IKO with ball-and-screw systems, directly driven by digitally controlled servomotors. This solution ensures high positioning accuracy and repeatability over a long period of use. The FP66 A CNC vertical machining center also features a high-quality cast-iron gantry structure, which, correlated with the extra-wide base resting on the ground, minimises the effects of bending torque resulting from the hanging mass of the spindle. Th ...

XYZ SMX 5000 CNC bed milling machine was built in 2016 in the UK. The machine for precision machining of workpieces with a maximum weight of 850 kg is made from a uniform cast iron, which guarantees excellent rigidity and stability during even the most intensive machining. The enclosed workspace includes a large work table with a length of 1930 mm and a width of 355 mm, a reliable spindle and a tilting work head. All this is complemented by a CNC control with integrated CAD functions, which significantly simplifies everyday machining. The XYZ Machine Tools SMX 5000 CNC milling machine weighs 3570 kg. Technical specifications of the XYZ SMX 5000 milling machine - feed in the X/Y/Z axis: 1500/600/580 mm - rapid traverse in X,Y,Z axis (CNC): 6.3 m/min - rapid traverse in X,Y,Z axis: 3.8 m/min - work table dimensions (L x W): 1930 x 355 mm - maximum workpiece weight: 850 kg - number ...

Horizontal hydraulic press, for making bales, manual tying, tunnel: 900x900. Engine: 15 hp (11 kw)

- Year: 2007 - Engine: 15 hp (11 kW) - Maximum pressure: 7.3 bar

Brand: Altech, engine: 15 KW (20 hp), stainless steel.

Injector Brand: Setter (Santonja), 2 stations, hydraulic, 2 engines: 7.5 KW (10 HP) each. Total: 15 KW (20 hp) Direct injection to the cut for footwear.

- With hydraulic pusher - Year: 2004 - Engine: 75 hp (55 kW) - Hopper dimensions: 1118 x 1990 mm - Cutting chamber: 1200 x 370 mm -Rotor: Orbit diameter: 370 mm Cutting speed: 1500 rpm Num. blades: 26 -52 (variable depending on the material to be treated) - With 3 sets of grille: Ø20, Ø30,Ø35 mm - Spare gearbox - Extra hopper 3000 x 2200 x 1600 (height) mm

Kemper ECO 150A plus 2 boilers for sale at call With instruction manual Sold under exclusion of any warranty Loading no problem Sightseeing and pick-up preferred

AGICOM recycling machine trade: The RC 1500 cable peeling machine is a used device, built in 2015. The device is in top condition and ready for immediate use! Peel range: 1.0-70mm cable Replacement and wear parts are available at any time if required in the future. Drive 230V 0.75 kW; Weight: 43 kg Desktop cable peeler with integrated guide roller

AGICOM Recycling Machine Trade: Cable Peeling Machine, Desktop Cable Peeler RC1500 Cable diameter: 1 - 60 mm Cutting speed: 9 - 18 meters/min Working voltage: 230V Drive power: 0.75 kW Total weight: approx. 48 kg Dimensions: 422 x 380 x 400 mm Year of Make: 2015

AGICOM recycling machine trade: Small alligator shears JMC 150 overhauled by the manufacturer, benchtop device, ready for immediate use! Manufacturer: Mc Intyre Knife length: 150 mm Knife opening: 105 mm Cutting capacity: 25 tons Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal

AXA Portale VPC-55 in good condition Heidenhain iTNC-530 Vertical 3-axis gantry center Year of manufacture 2007 X-axis 2360mm Y-axis 1400mm Z-axis 900mm Table clamping area approx. 2700 x 1100mm, load up to approx. 3000kg Pendulum operation possible 7pcs T-Tension Grooves 14H9 Mass approx. 25t. Oil drip pan Heidenhain Handwheel HR 410 Dqrrlx Measuring system Heidenhain direct M&H 3D Pushbutton Machine protection system from Brankamp Spindle design SK50 DIN 69871A 56kW drive with up to 6000 1/min IKZ 20bar + belt filter system in tub Spindle hours approx. 33156 Tool Changer 30x Hinged belt chip conveyor right side Chip Spray Gun

Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial.no.063 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled

Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial no.023 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled

Tool Milling Machine - Universal DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial No.033 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled Machine is sold as a defect

Machine Type: CNC Travelling Column Milling Machine Make ZAYER Type KCU6000 Year of construction 1992 Control type Heidenhain TNC 415 X-way (mm) 6,000 Y-off (mm) 2,000 Z-off (mm) 3,000 Speeds from (rpm) 20 - 1,800 Tool holder BT50 Feed longitudinal (mm/rev) 5 - 5000 mm/min Feed Transverse (mm/U) 5- 5000 mm/min. Vertical feed rate (mm/rev) 5- 5000 mm/min. Rapid traverse 10,000 mm/min. Total power(KW) 34 Length (mm) 11,000 Width (mm) 2,500 Height (mm) 7,000 Weight 31.000 kg Information 'Juaristi MG6' rotary table: 1500 x 1200 mm With coolant pump Cooling system: 2.5 bar Tool cooling: 15 bar