used 17 for sale

Copy lathe Killinger lathe Type KM-6000-S Hydro With hydraulic copy unit with original tracking Travelling crimp bezel With four jaws bezel Feed motor 0.55 kW, infinitely variable 0-4 m/min. Center width 1700 mm Copy length 1650 mm Center height 280 mm Copy diameter longitudinal 320 mm, transverse 560 mm Profile Scanning Hydraulic Scanning Pressure 65 g Copy carriage stroke 75 mm Drive motor 2.2 kW Spindle speeds infinitely variable 500-4500 rpm. Spindle holder M 33 DIN 800 Hydraulic pump 0.55 kW Includes cabinet with accessories and center support Dimensions 2650 mm x 850 mm x H 1250 mm Weight 750 kg

TRUMPF TRUMABEND V170 (special price) Year of construction 2003 Machine No. B0105A0046 Pressure 170t Bending length 4080mm Stand width 3680mm Stand projection 410mm Installation height 535mm Stroke: 365mm Feed speed: 200 mm/s Working speed: 1-0 mm/s Retraction speed 135 mm/s Table width 200mm Table height 1050mm Travel - x 600/860mm Oil capacity 350 l Total power requirement: 29 kVA Machine weight approx. 18,000 kg Dimensions L-W-H 4620 x 2210 x 2885mm no tools Model series with increased installation height / piston stroke () Equipment: - DELEM CNC Control Model DA 69TW Control unit left front Flexible articulated arm bracket for control - CNC axis adjustment: Y1 -Y2-X - R- Z1/Z2 axis - X axis speed: 500 mm/sec. Max. stop range : 860 mm - R axis - speed: 300 mm/sec. max. travel : 250 mm - Z axis - speed: 1000 mm/sec. max. travel : 3260 mm - WI ...

This geared motor is manufactured by Muller Martini Weiterverarbeitungsmaschinen, under item no. 3672.1797.2. The price is CH 3000.- at Muller Martini.

MARTIN T90 Four-sided crane with NC control and 6 spindles and swing axle (Left3) Specifications: Brand: MARTIN Type: T90 with 6 spindles incl. pendulum axle (left 3) Year of Make: 2023 A1 - Refurbished and Repainted M-No.: V239722 Operating hours: 5,962 hours Feed table: 2000 mm Table height adjustment: Max. Spahn name 10 mm Stop bar: Manual adjustment 10 mm Planing width: 22 - 260 mm (profiling width top 4 is 260 mm, spindle 5 & 6 is tool dependent) Planing thickness: 5 - 160 mm (profiling width right/left is 160 mm, spindle 5 & 6 is tool dependent) Planing shaft: 1st spindle, with max. 10 mm decrease, 260 mm, flight circle min. ø100 mm - max ø125 mm Calibration planing and contour shafts: 2 & 3 spindles (vertical spindles) max. 10 mm, clamping length 160 mm, flight circle min. ø100 mm - max ø125 mm Thickness shaft/upper shaft: 4th top spindle  ...

Samco Unilev Edge Grinding Brand: SAMCO Type Unilev M-No.: 1887 Year of manufacture 1989 Data: Length of work tables 1440mm Width of work tables 710mm Tilt adjustment 0-30° Sanding belt: 2170150mm Main drive: 3 KW Oscillatation sanding belt 0 - 25 mm Weight: 400 KG Press 6 bar

Weeke ABD 150 Automatic Drilling and Dowel Insertion Brand: Weeke Type: ABD150 Year of construction 2013 Machine Number: 0-253-05-5352 Description: CNC-controlled duel drilling and driving machine Workpiece Dimensions: X-Axis: Y-axis: Z-axis: Stroke in the middle: Field of work: Positioning: X-Axis: Y-axis: Z-axis: Stops: Support table with front and back stops 6 workpiece supports can be freely positioned over the entire X-length with scale Pneumatically operated center stop, manual control via pressure switch 5 Vertical pressure cylinde, manual positioning Vacuum clamping for sensitive surfaces 10 vacuum suction cups freely to position over total length (115140100 mm) 2 vacuum cups (12575100 mm) 1 vacuum suction cup for shablone Vacuum pump: 40m³/hour Aggregates: Horizontal drilling unit with 1 spindle Dowel station (32 mm distan ...

Kaeser blade compressor BSD 75 37 KW 7.5 m3/mim 8.5 bar 2017 Year of construction 20.000 Bh Fully functional Private sale under exclusion of any warranty

for sale TEDOM 173 kw natural gas year 2021 hours 10 000 in container

Holtrop Jansma SUV 200s afzuiging Brand: Holtrop & Jansma Type: SUV 200S M. No. W0057430S Year of Make: 2017 Type: 200S Length (mm): 2380mm Width (mm): 850mm Height (mm): 2550mm Intake supports: 200mm Capacity: 2.700m3uur Pressure (Pa): 1.575Pa Motor: 2.2 kW Filter surface area: 5 m2 Filter 2 Fabric Filter Elements Waste container: 2 210 liters Sound level: 79 (dB(A))

Panel sizing saw with lift table loading HOLZMA type OPTIMAT HPL 380/43/22/L Specifications: • Saw blade protrusion (mm): 95 • Saw carriage feed forward (m/min.): 5 - 130 • Saw carriage feed backwards constant (m/min.): 130 • Program slider speed forward (m/min.): 80 • Reverse program slide speed (m/min.): 80 • In EU countries, a maximum forward speed of 25 m/min is prescribed. • Angular pressure device min. pressure width (mm): 0 • Angular pressure device max. pressure width: complete cutting length • Main saw motor (kW): 13.5 • Scoring saw motor (kW): 2.2 • Collet opening max. (mm): 100 • Working height (mm): 920 • Cutting length (mm): 4300 • Collets: 7 pieces, of which the first 3 pieces are two-fingered, all others are single-fingered • Pitch: 75/275/475/1050/1850/2650/3450 mm measured from angle ruler to center collet Lift table: ...

Martin T26 Swivel milling machine with axes Digital display and speed control of the 7.5 kW spindle, tenon table Brand: Martin Type: T26 with frequency control M-No.: 20000 Year of manufacture: V409217 YouTube: Control: Electrical adjustment digital readout; Spindle height & inclination, jaw stops-chip removal, electrical adjustment of feed device height Control panel: At eye level, swivel Engine: 7.5 kW, 10 hp with frequency-controlled speed Milling spindle: ø40 mm spindle with SK40 en mandrel quick change system Milling mandrel: -45 to + 45° CNC or electrically manually adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Calibration device: For exact 0 positioning of the milling spindle Electro-pneumatic spindle locking mechanism for tool change  ...

Labeller for disposable syringes Manufacturer: Bausch & Ströbel Type SME 6005 This machine allows the insertion of labels (self-adhesive labels), as well as piston rods into disposable syringes. Capacity 6000 syringes/h Volume of syringes 0.5 to 10 ml Diameter of syringes 7 to 17 mm Label dispenser LAETUS Control Camera

ProLift Pallet Stacker Device has hardly been used and is almost as good as new. - Year of construction: 2019 - Voltage: 230V 50 Hz - Power: 0.8 kW Installation instructions and material are enclosed in full. Shipping on pallet with forwarding agent possible throughout Europe. More machines available! Feel free to take a look at our advertisements. If you have any questions, just write or call: 0160 966 798 44 Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

For sale is a robust four-sided planer from the manufacturer GUBISCH, type B230, built in 1986. The machine runs perfectly and is technically in very good condition. Specifications: • 4 spindles with 7.5 kW motor power each and motor brake • Spindle diameter: 40 mm • Speed: 6,000 rpm • Tool diameter: 125 mm • Spindle shaft drive • Planing width: up to 230 mm • Planing height: up to 140 mm • Feed motor: 1.5 kW, infinitely variable from 3.5–19 m/min. • Diameter feed rollers: 140 mm • Dressing table length: 2,000 mm • Machine dimensions: 3,800 x 1,400 x 2,000 mm (LxWxH) • Weight: approx. 2,900 kg Tested, technically flawless Price net plus VAT. VAT. Delivery by freight forwarder can be organized on request. If you have any questions or would like to receive an individual offer, please do not hesitate to contact us. TEL. 016096679844 M ...

METALLKRAFT Profile steel shears / hole punch HPS 65 DS Combined hydraulic profile steel shear and hole punch with punch, notching station and flat steel, angle steel and profile steel shear - for simultaneous work on punch and profile steel shear Punching station - Punching pressure: 65 t - Punching capacity: max Ø 26 x 20 / Ø 57 x 10 mm - Projection: 305 mm - Stroke: max. 55 mm - Number of strokes: 25 strokes/min - Working height: 900 mm Steel bar shears - Round cutting capacity: max. Ø 45 mm - Square cutting capacity: max. 45 x 45 mm - Angle steel shears - Cutting capacity L-profile 90°: 120 x 120 x 12 mm - Cutting capacity L-profile 45°: 70 x 10 mm - Cutting capacity U-I profile: 120 x 58 mm - T-profile cutting capacity: 90 x 11 mm - Working height: 1,140 mm Flat steel shears - Cutting capacity 90°: max. 300 x 20 / 375 x 15 mm - Angle cut 45°: max.  ...

robust and powerful panel saw, HOLZ-HER Type 1265 Supercut ideal for cutting up to a maximum cutting height of 2000 mm and a cutting width of 4250 mm. The machine impresses with its compact design and generous machining options at the same time – perfect for professional use in workshops and companies. Technical highlights: Max. saw blade diameter: 222 mm Max. cutting depth: 60 mm Drive: 3.0 kW at 400 V, 16 A Center hole diameter: 30 mm Compact transport dimensions: 5000 x 1200 x 2680 mm Condition: Good used condition – functional, without documentation The machine can be viewed and tested at any time 2 pieces in stock – if you have any questions, please do not hesitate to contact us Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Phone & WhatsApp: 0160 966 798 44 Errors excepted / Prices net plus VAT

CNC turning center from the renowned manufacturer INDEX. The G250 was manufactured in 2012 and is in very neat condition. The machine is designed for demanding turning and milling operations and is ideal for complex workpieces in individual and series production. The INDEX G250 CNC turning center is offered including the LNS Quickload Servo 3 bar feeder, the EWAB PS-800 tool carrier system, the KNOLL S 400-1/490 chip conveyor, the Knoll FKA 750 coolant device and an air purification system. INDEX G250 with WHU + LNS Q Basic machine data Turning length: 140 mm Main spindle: Spindle size D90, size 8 DIN Max. power: 43 kW (100% DC) Pitch angle: 2.5° Hollow clamping cylinder with clamping cylinder device Accuracy Package: Roundness ≤ 0.001 mm (under test conditions) Sub-spindle: Three-jaw chuck Röhm KFD-HS 250-86 Connection D90, prepared with stop and coolant line Tai ...

ISEL SM Alpha Omega – 5-axis CNC machining center with 2 spindles For sale is a precise and versatile ISEL SM Alpha Omega 5-axis CNC milling machine, built in 05/2015, equipped with two high-frequency spindles. This machine is ideal for applications in medical technology, precision engineering, micromachining, and mold and prototype construction. Specifications: Model: ISEL SM Alpha Omega Year of manufacture: 05/2015 Item number: 274507 SSZ6000 Axes: 5 (X, Y, Z, A, B) Travel: X-axis: 1800 mm Y-axis: 1700 mm Z-axis: 800 mm Spindles: Quantity: 2 high-frequency spindles Speed: up to 60,000 rpm Power: up to 6 kW Tool holder: HSK25 / HSK32 Dimensions (WxDxH): approx. 2800 x 2550 x 2950 mm Weight: approx. 1400 kg Solid steel/granite sandwich construction for high rigidity and vibration damping Highly dynamic linear motors in X and Y axes Turn/swivel  ...

For sale is a used Toyota diesel forklift type 5FD60, only 3,600 operating hours Off-road capability thanks to air/double mounting Specifications: Manufacturer / Type: Toyota 5FD60 Year of Make: 2007 Propulsion: Diesel Motor power: 70 kW Load capacity: 6,000 kg Mast: standard or on request (e.g. duplex / triplex) Lifting height: approx. 4,500 mm Forks: Standard version, incl. heavy-duty extension Front track width: 1,490 mm Front Tyre Size: 6.25–15 / 6.50 Rear Tire Size: 8–25 15 / 6.50 Operating hours: on request Condition: used, technically perfect, well-maintained UVV inspection: new on request technically perfect condition. Ready to use. Solid industrial machine – ideal for heavy-duty outdoor use High-quality Toyota Delivery possible nationwide Viewing and test drive possible by appointment. Further information and pictures are available on requ ...

Offer 24365 Specifications: - Bending performance pipe at 45 kg / mm² to Ø 60 X 4 mm - Solid material up to 45 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 171 mm - Smallest inner bending radius Ri 10 mm - Drive 400 V / 4 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - bending angle preselection - Digital bend angle display + bend angle fine adjustment - Manual tube twisting device - Bending tools 22 R 67 mm, 25 R 82 mm, 35 R 110 mm - Flat steel bending attachment

Offer 25182 Specifications: - Max. working width 2040 mm - Max. material thickness 4 mm - Roller diameter each 140 mm - Stroke 70 mm - Rear roller + lower roller adjustable for conical bending - Upper and lower roller motor-driven - Working speed right + left 6 m/min - Drive 380 V / 6.2 kW - Space requirement approx. W 3560 x H 1100 x D 870 mm - Weight approx. 1700 kg - with: - asymmetrical roller arrangement - Crowned turned naturally hardened rollers -one. Rear roller adjustment - Bending - Swing-out upper roller - E-footswitch for clockwise and counterclockwise rotation

GAS BOILER 16MT Design pressure:18 Max working pressure:17 Test pressure:23.4 Operating water volume 25,400 Design code:TRD Manufacturing date:2013 Commercial: Mainie Harun (mainie@topglove.com.my) Noor Syaida (noor_syaida@topglove.com.my) Technical: Muhd Syahir (mhd_syahir@topglove.com.my) Nik Faris (nik_faris@topglove.com.my) Incoterm: EX WORK Currency: USD

Used homogenizing mixer manufactured by UCR (PL), model M 300. The mixer is designed for making creams, pastes, emulsions, ointments and other substances in the fields of cosmetic, pharmaceutical, food and chemical industries. The mixer is equipped with a vat with a working volume of 250 liters, made of acid-resistant steel. The vat has a heating jacket and insulation. An additional loading opening is located on the lid and is equipped with a hopper for feeding additives during mixing. The lid is hydraulically lifted. Technical data: -Power supply 380V -Installed power 21kW/27kW -Heating temperature range 20°C + 90°C -Pressure from 0 to + 0.6 bar. -High of mixer with raised lid 3120 mm. -Height of mixer when lid is down 2100 mm -Width 1260 mm -Length 1750 mm -Mass approx. 1800 kg Tank: -Working capacity 250 L -Total capacity 300 L Wall-anchor agitator: -Mixer s ...

Used packaging line for ready-made packages using a weighing feeder with a labeling machine for cylindrical packages. New: 2008. The line consists of: - conveyor for empty packages - weighing dispenser - two weighing heads - bucket feeder - conveyor for full packages - closing machine - rotary table - labeller for cylindrical packages in the labeller set: module for labelling around the perimeter + pressure strip labelling head AGJ 1200 160 250 product sensor mounting stand « single-sided mounting frame Technical data: Dimensions 5.2 x 2.6 x 2.3 m Power consumption approx. 5kW Power supply 400V - 3 phases Continuous operation yes Accuracy / Efficiency +/- 1% of the average weight range / approx. 20 packages/min. (depending on the size and type of product) Compressed air demand 30 l/min The line is designed for packaging products in plastic containers with a capacit ...

Used fluidised bed dryer mady by Buhler model OTWG-280, new 1996. The dryer consists of a blower, piping. All elements are made of acid-resistant sheet metal, the blower is resistant to high temperatures. The whole set is manufactured by Buhler. Technical data: - Weight 1750 kg - Content m³: 6 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.

Used high intensity mixer Henschel, model: KM 1750, capacity: 1750 L, new: 1978

Used cheese packaging line made by CRYOVAC. New: 2004. The line includes: 1)BL60 bagging machine (CRYOVAC, 2004) TECHNICAL DATA: - Weight: 600 kg - Consumption: Compressed air (pressure 6 bar, 30-40 m3/h) - Electricity: 380V, 50Hz, 3F + ground - Installed power: 1kW - Operating conditions: Bag dimensions: Width: min. 130mm - max. 450mm Length: min. 300mm - max. 650mm - Maximum dimensions of product: Height: min. 40mm - max. 220mm Width: min. 50mm - max. 260mm Length: min. 150mm - max. 425mm Weight: 8 kg Cycles per minute: 20 Number of employees: 1 (employee to change bags, products and general inspection) 2) Vacuum packaging machine VR8610 FUROCAVA (CRYOVAC, 2004) TECHNICAL CHARACTERISTICS: - 4 rotary chambers for continuous flow of products at different speeds - Flow of products of different forms and dimensions, is carried out quickly and without use of s ...

Used jam evaporator, model WAA-17, new 1985. 1500 L volume.

Used tube machine for heat-sealable plastic tubes by Neweco type NTT-400A. New 2018. Consists of: 1. tube maker: - internal diameter of the socket min Ø10 to max Ø50, - tube length 75-250 mm - power supply 230V 50Hz - dimensions: height 1980 mm, length 1140 mm, width 1705 mm. - weight with fittings approx. 290kg - sound pressure level max 73 dB, most of cycle

Chip Conveyor /Grey /New Total Length :4000mm Total height : 1650mm Discharge height: 1100mm Insertion length: 2000mm Insertion width: 440mm Insertion height: 170mm Weight: 220Kg

Chip conveyor / black / new Specifications: Overall Length: 4150mm Overall height: 1770mm Discharge height : 1200mm Insertion length: 2950mm Insertion width: 380mm Insertion height: 340mm Weight: 230 kg

PROD. Atlas Copco TYPE GA 15 VSDFF PLUS YEAR 2017 POWER (kW) 15 CAPACITY (m3/min) 2,51 PRESSURE (bar) 12,75

PROD. Atlas Copco TYPE GA 90 VSD YEAR 1999 POWER (kW) 90 CAPACITY (m3/min) 17,07 PRESSURE (bar) 13

PROD. Atlas Copco TYPE GA 90 VSD YEAR 1999 POWER (kW) 90 CAPACITY (m3/min) 17,07 PRESSURE (bar) 13

PROD. Atlas Copco TYPE GA90 VSDFF YEAR 2003 POWER (kW) 90 CAPACITY (m3/min) 17,07 PRESSURE (bar) 8.5

CO-GEN GENERATOR SYSTEM By MTU Onsite Energy Year 2015 Type GB1286N5 1286 kW Electrical Power Natural Gas working hours 18.500 h 400 V, 50 Hz, 3-Phase With: 1 Control Panel 1 GEA Heat Exchanger 1 Stamford AC Generator: 1770 kVA Base Rating 1416 kW Base Rating 1500 RPM 400 V, 50 Hz, 3-Phase

Pasteurization plant / operating room used, Capacity 15000 l/h, consisting of: - Separator WESTFALIA, type MSA130-01-076, 15,000 l/h - Milk heater FISCHER, type: EUROCAL 15000 l/h, 72/74°C, year of construction 2022 - Frame heater FISCHER, EUROCAL, built in 2017 - Homogenizer SCHROEDER, year of manufacture unknown. - Various pumps, valves, fittings, piping and control cabinet. The system has been out of operation since April 2024 and is still completely installed. Dismantling at the buyer's site

Spiral mixer / dough machine Model: SP 75 ECO sophisticated technology ... already proven many times over! Manual control 2 gears, 2 clocks/ timers Kneading machine for doughs from 6 to 120 kg / 4-75 kg flour Flour dust hood Stainless steel boiler and spiral Boiler capacity 175 litres mobile, with brakes only with us with DGUV V3 tested Dimensions: 800 x 1190 x 1280/1700 mm, WxDxH Connection 400V, 8.25 kW, 30Amp. 32A-CEE Plug Used machine overhauled with 3 months warranty + spare parts service Option: Delivery Maintenance contract Service Package E-Box Instruction & Commissioning We have a TOP selection of spiral mixers in stock!

Sourdough - Fast - Fermenter Model: Hema BRSSF 300 P with external LED control approx. 60 to 300 kg with timer and built-in scale Stainless steel version, mobile Agitator at the bottom with pump and scale with water cooling only DGUV V3 tested by us Ice water system L 170-P Hema ( external ) Connection 400V, 2.2 kW, 16A-CEE plug Dimensions: 870 x 1060 x 1350/2060 mm, WxDxH Used machine cleaned 3 Months Warranty + Spare Parts Service Option: Maintenance contract Instruction & Commissioning Visit our large exhibition!

1.0 pcs Bag Insertion Machine Manufacturer: NIVIERPLAST Type: EP-17-C-D-E-I Year of Make: 2020 Bag Dimensions: 600 / 200 x 1000 x 0.07 mm The machine is equipped with two magazines.

XCMG XE18E – compact and powerful mini excavator for maximum efficiency (open cab) The XCMG XE18E is a versatile mini excavator designed for precision work in construction, landscaping, road construction and urban projects. With its zero-tail swing design and hydraulically extendable tracks, this machine is ideal for working in tight spaces without sacrificing stability or performance. optional 3 bucket package, wide-medium-narrow: € 600 Optional hydraulic quick coupler: € 1.200,00 Warranty until 2026 (Rented, hours are subject to change) Compact and manoeuvrable – ideal for urban projects and tight workspaces Powerful Kubota D902 diesel engine – 11.8 kW (15.8 hp) with Stage V emission standard Zero-tail swing design – prevents damage to surrounding structures Hydraulically adjustable tracks – for maximum stability on any terrain Boom swivel function � ...

A Eurotrac HE18-C is sold Price incl. VAT VAT reclaimable New --> Warranty Eurotrac HE18-C Engine: Kubota Heating Radio Swivel arm 2 Travel speeds Hydr. Adjustable chassis Hydr. Quick Hydr. Adjustable embankment function Shovel Package Specifications: Engine Model: Kubota D1105 Stage-V (14.2Kw) Net weight: 1850 kg Machine weight: 1760 kg Main pump flow: 2x 17.6 + 6.6 l/min Tank capacity: 22 ltr Adjustable track width: 1060~1360 mm Travel speed: 2 / 4 km/h Quick-change model: CW0 Bucket capacity: 0.04 m³ Bucket width: 400 mm Bucket Max. Excavation Force: 11.3 KN Engine Model: D1105 Engine Displacement: 1,123 L (cc) Motor Output Power: 14.2 KW (20 HP) Power speed: 10-12 r/min Performance Running speed (low/high): 2/3.6 Km/h

Processed bore diameter, mm -100-400 Work piece diameter, mm - 800 Work piece length, mm - 320 P motor ,kW - 7,5 Machine dimensions , mm - 4165x1780x2000 Machine weight, kg - 8600 Price 9500 EUR

For sale are: 3 pieces of used precision lathes Manufacturer: Weiler Werkzeugmaschinen GmbH Type: DZ65 (Pictures 1 - 12), DZ65/H1 (Picture 13 - 20), DZ65/H1 (Picture 21 - 28) Year of construction: 2011, 2009, 2009 Operating hours: 17,324, 31,298, 31,720 Control: Siemens Sinumerik 840D Turret capacity approx.: 12 pieces Turning diameter, max.: 560mm Spindle speed: 5000 1/min Travel: X-axis: 207 mm Z-axis: 530 mm Lining: RÖHM, d200 mm Conveyor Handwheel Documentation The DZ65 BJ 2011 has powered WKZ. Scope of equipment see pictures machine card at the end of each series of pictures... Machines are in a very neat condition and can be viewed in our warehouse. Price is for one machine.

Arburg 820S 4000-2100 / Production line with the Arburg Multilift robot Year of manufacture: 12.2010 Injection unit: Screw diameter: 70 mm Injection weight: 984 g Spray pressure: 2000 bar Dosing volume: 1078 ccm Clamping unit: Clamping force: 400 t Tiebar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Production line with the Arburg Multilift robot Machine in very good technical condition Euromap 67 Robot interface Control with air valve Hydraulic core pull x 4 Control with hot runners x 12 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection The machine was regularly serviced in Germany Arburg Multilift robot Year of manufacture: 12.2010 5-axis robot: 3 axes are driven by servo motors (electric); ...

Arburg 820S 4000-2100/400 / Production line with the Sepro Industrial Robot SR S5-35 S3 Trans robot / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Spray pressure: 2500 bar Dosing volume: 792 ccm Clamping unit: Clamping force: 400 t Tiebar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced Injection Units – Bimetal Proportional valve on vertical injection unit – precise injection ...

New MB 12 - SH | 1.2 Ton Mini Excavator | With Warranty Location: Poland | Availability: Production machine Product Overview: We offer the MB 12 - KSH, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping and light construction work. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: Closed Cabin Technical Specifications Engine: Co-op D192F Power: 13.4 kW / 18 HP at 3600 rpm Torque: 43 Nm at 2600–2800 rpm Cooling: Water-cooled Fuel type: Diesel Number of cylinders: 3 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working  ...

1 gebr. CNC Lathe Year of Make: 1998 Control: Heidenhain EP 3190 Machine hours: approx. 17000 h Specifications Circumferential diameter over bed 440 mm Circumferential diameter over face slide 210 mm Turning length 305 mm Spindle bore 56 mm Speed 25-5000 rpm Spindle power 7.5 kw Tool turret 12 Tool shank VDI 20 Machine weight 3000 kg Machine dimensions L x W x H 2800 x 1651 x 1771 mm Accessories: Measuring arm Parts catcher Conveyor Tailstock MK 3 Documentation

CNC Lathe Make: Gildemeister Model: CTX 200 Control: Heidenhain Pilot 1190 Year of manufacture 1996 Switch-on hours: approx. 38,000 h Specifications Circumferential diameter over bed 440 mm Circumferential diameter over carriage 210 mm Turning length 305 mm Bar passage 42 mm Speed 5000 rpm Turret 12 stations Tool holder 20 VDI Machine dimensions L x W x H 2800 x 1651 x 1771 mm Machine weight approx. 3000 kg Accessories: Various tool holders Collet chuck on main spindle Tailstock Documentation

NOW IN STOCK: New MB 12 - SH | 1.2 Ton Mini Excavator | With Warranty Location: Poland | Availability: In stock Product Overview: We offer the MB 12 - SH, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping and light construction work. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: open Technical Specifications Engine: Co-op D192F Power: 13.4 kW / 18 HP at 3600 rpm Torque: 43 Nm at 2600–2800 rpm Cooling: Water-cooled Fuel type: Diesel Number of cylinders: 3 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working pre ...