used 17 for sale

Arburg Allrounder 270S 250-60 Clamping force: 25 t Year of Make: 1999 Injection weight: 17 g Injection Unit 60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 cc Injection weight: 17 g L/D ratio of screw: 24.5 Clamping unit 250 Clamping force: 25 t Panel size: 400 x 400 mm Lights spar spacing: 270 x 270 mm Tool height: 200 mm Opening travel: 275 mm Maximum panel spacing: 475 mm Electrical connection (fuse): 120 l Weight: 1900 kg Control: Selogica equipment: -Sorting flap -Euromap 12 interface -Picker

Battenfeld HM 180 /525H/60V Clamping force: 180t Year of Make: 2009 Injection weight in hp: 175/20.8g Injection unit .../525/... 60 Screw diameter: 35/18 mm Spec. Spray pressure: 2743/2593 bar Injection volume: 193/22.9 cc Injection weight in hp: 175/20.8 g L/D Screw Ratio: 22/20 Clamping unit 180/... Clamping force: 180 t Lights spar spacing: 570 x 520 mm Tool installation height: 305 mm Ejector travel: 200 mm equipment: -Servo drive rotary table -3 x Hydraulic Core

Battenfeld HM 180 /525H/60V Clamping force: 180t Year of Make: 2009 Injection weight in hp: 175/20.8g Injection unit .../525/... 60 Screw diameter: 35/18 mm Spec. Spray pressure: 2743/2593 bar Injection volume: 193/22.9 cc Injection weight in hp: 175/20.8 g L/D Screw Ratio: 22/20 Clamping unit 180/... Clamping force: 180 t Lights spar spacing: 570 x 520 mm Tool installation height: 305 mm Ejector travel: 200 mm equipment: -Servo drive rotary table -3 x Hydraulic Core

Borche BH320 Clamping force: 320t Year of Make: 2017 Injection weight in hp: 771g Screw diameter: 60 mm Spec. Spray pressure: 1560 bar Injection volume: 848 cc Injection weight in hp: 771 g Cylinder heating capacity: 18.6 kW Clamping unit 320/... Clamping force: 320 t Size of the clamping plates: 960 x 960 mm Lights spar spacing: 665 x 665 mm Ejector force: 77 kN Tool installation height: 220...655 mm Opening travel: 580 mm Max. plate spacing: 1235 mm Ejector travel: 180 mm Weight: 12000 kg Dimensions(m) LxWxH: 7.0 x 1.8 x 2.4 m Control type: KEBA 1075

Borche BH320 Clamping force: 320t Year of Make: 2017 Injection weight in hp: 771g Screw diameter: 60 mm Spec. Spray pressure: 1560 bar Injection volume: 848 cc Injection weight in hp: 771 g Cylinder heating capacity: 18.6 kW Clamping unit 320/... Clamping force: 320 t Size of the clamping plates: 960 x 960 mm Lights spar spacing: 665 x 665 mm Ejector force: 77 kN Tool installation height: 220...655 mm Opening travel: 580 mm Max. plate spacing: 1235 mm Ejector travel: 180 mm Weight: 12000 kg Dimensions(m) LxWxH: 7.0 x 1.8 x 2.4 m Control type: KEBA 1075

Arburg Allrounder 270S 250-60 Clamping force: 25 t Year of manufacture: 1999 Shot weight: 17 g Injection Unit 60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 ccm Shot weight: 17 g Screw L/D ratio: 24.5 Clamping System 250 Clamping force: 25 t Mold platen dimensions: 400 x 400 mm Clearance between tie bars: 270 x 270 mm Mold height: 200 mm Opening stroke: 275 mm Maximum platen distance: 475 mm Electrical connection (fuse protection): 120 l Weight: 1900 kg Control system: Selogica Equipment: -Sorting flap -Euromap 12 interface -Picker

Battenfeld HM 180 /525H/60V Clamping force: 180t Year of construction: 2009 Shot capacity: 175/20,8g Injection unit .../525/60 Screw diameter: 35/18 mm Injection pressure: 2743/2593 bar Injection volume: 193/22,9 ccm Shot capacity: 175/20,8 g L/D ratio: 22/20 Clamping unit 180/... Clamping force: 180 t Distance between tie bars: 570 x 520 mm Mould height: 305 mm Ejector stroke: 200 mm Equipment: -Servo-driven rotary table -3 x hydraulic core

Borche BH320 Clamping force: 320 t Year of construction: 2017 Shot weight in PS: 771 g Injection Unit Screw diameter: 60 mm Specific injection pressure: 1560 bar Injection volume: 848 ccm Shot weight in PS: 771 g Cylinder heating power: 18.6 kW Clamping Unit 320/... Clamping force: 320 t Platen size: 960 x 960 mm Clearance between tie bars: 665 x 665 mm Ejector force: 77 kN Mould installation height: 220...655 mm Opening stroke: 580 mm Max. platen distance: 1235 mm Ejector stroke: 180 mm Weight: 12000 kg Machine dimensions (LxWxH): 7.0 x 1.8 x 2.4 m Control system: KEBA 1075

CNC 5 Axis Gantry Milling Machine Ingersoll Bohle MC T2 x-travel 4000 mm y-travel 3400 mm (column passage 2000 mm) z-travel 1000 mm Bobkm Avsuhwcusfyjwn Control Siemens 840D SL Spindle 37 kW Speed 12-2800 rpm Distance between milling spindle and clamping surface 280-1280 mm Mounting ISO SK-50 Table dimensions - longitudinal 3000 mm Table dimensions - transverse 1500 mm Total power requirement 70kVA Machine weight approx. 82t Space requirement approx. 10200mm x 7200mm x 5925mm Automatic tool changing device for 60 tools 1 universal milling unit 1750 Nm Swivel range C-axis 0-360° (by 1° each) Swivel range 90°-0°-90° (around 1° each)

Mazak VTC 300C-ll CNC Vertical Travel Stator Machining Center CNC control Mazatrol PC Fusion 640 M Table size 2000 x 760 mm Table load 1400 kg Number of pallets: 1 x X-axis travel 1740 mm Y-axis travel 760 mm Travel Z-axis 660 mm 4e as (draaitafel) Kitagawa MR 250 Spindle holder CAT 40 Spindle speed 12,000 1/min Spindle motor 11/7.5 kW Magazine capacity 48 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

CNC Vertical Travel Stator Machining Center CNC control Mazatrol 640 M Table size 2000 x 760 mm Table load 1400 kg Number of pallets: 1 x X-axis travel 1740 mm Y-axis travel 760 mm Travel Z-axis 660 mm 4e as (draaitafel) Kitagawa MR M200 (MacMini) Spindle holder CAT 40 Spindle speed 12,000 1/min Spindle motor 11/7.5 kW Magazine capacity 30 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Offer 25180 Specifications: - Bending capacity pipe at 45 kg / mm² to Ø 60 x 4 mm - Solid material up to 45 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 171 mm - Smallest inner bending radius Ri 10 mm - Drive 400 V / 4.0 kW - Space requirement approx. W 400 x H 950 x D 700 mm - Weight approx. 140 kg - with - bending angle programming 10 programs - With 9 bending angles each - Digital bend angle display + bend angle fine adjustment - E.- Footswitch Ø 26 R 82 - Bending tools Ø 12 R 35 ; Ø 14 R 36 , Ø 20 R 56 - Ø 22 R 67, 28 R 56, Ø 1/2 R67 , Ø 3/4 R xx , Ø 1 R 110,

Used Kosme PET Bottling Line, built in 2018, is a highly efficient machine with a production capacity of 5,300 bph for 500 ml PET containers. The line includes several essential components: a Kosme preform unscrambler, a Kosme preform elevator, and a Kosme preform sorter, all manufactured in 2018. The Kosme blow molder of the same year allows for the processing of preforms into finished containers. Additionally, the system is equipped with an ATS Chiller for temperature control, air conveyors for transportation, and a mixer made in 2016. The Kosme filler was built in 2017, while the AVE capper dates back to 1999. The Kosme labeler, from 2018, ensures precise and fast labeling. The line is also equipped with conveyors, an SMI shrink wrapper from 2001, and an SMI shrink tunnel for package handling. It is suitable for packaging 6, 12, and 24 units. Finally, a Videojet Date Coder and  ...

Offer 25194 Specifications: - Power 20 kVA - Primary power 3 x 400 V / 3 x 17.5 A - Secondary power 3 x 400 V / 3 x 28.9 A - Connection 400 V / 63 A - Space requirement W 750 x D 550 x H 650 mm - Weight 220 kg

Single-stage chemical cantilever pump for pumping chemically active and neutral liquids with a density of up to 1850 kg/m3, containing solid inclusions up to 0.2 mm, volume concentration does not exceed 0.1%. Temperature of the pumped liquid from -40 to +120⁰С. A hydraulic clutch is included in the kit. The pump can be driven either directly with an electric motor, through a coupling. So through a V-belt drive by engaging the hydraulic clutch. Quantity - 4 pcs. Pump specifications: Q = 50 m3/h H = 80 m N = 45 kW/3000 rpm. Shaft seal - mechanical. Flow part material - alloy steel 10Х17Н13М2Т (AISI 316Ti). The pump is not in use. Pump (without electric motor). It is possible to equip with an electric motor at the customer's request. Before the sale, the seller carries out pre-sale preparation with a guarantee Ready for operation Delivery to any country is po ...

Original Eaton Char-Lynn 104-1387-006 12960 WF17 2007220130 G22 5A Hydraulic Motor Disc Valve Motor NEW

Throughput depending on material type, speed, and cutting set Capacity: up to 10.000 kg/h Main motor power: 22 KW / 30 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm : Width: 150 Length: 150 Height: 170

Fully automatic baler Manufacturer: EUROPRESS Type: EP4 100-120 V5 H2 VK PREMIUM Operating hours on 05.02.2025: 19,879 Year of Make: 2017 specifications: Press force: 100 - 120 t Main drive power: 2 x 45 kW Total connected load: 135 kW / 254.6 A Tank capacity: approx. 4,300 litres Filling opening: 1,000 x 2,000 mm Bale size: 750 x 1,100 mm Binding: 5-fold vertical + 2-fold horizontal Machine weight: approx. 36.9 t Bale weights: up to approx. 600 kg Including: - Side pre-press flaps

Slotting Machine - Vertical VS 600 -Rotary table - diameter 600mm -Lifting range approx. 360mm -Three-jaw chuck - diameter 325mm -Good general condition Dimensions: LxWxH 1.9x1.2x2.2 meters / Weight approx. 1700Kg

COMPLETE CLT PRODUCTION LINE 1. Vacuum de-stacking of timber 2. Manual marking station for timber defects 3. Reject gate for boards 4. X-CUT S200 cross-cut saw to remove timber defects 5. Infeed system to finger jointing machine 6. Eurozink COMPACT 6-300 kN finger jointing machine up to 6 pcs/min 7. Vertical conveyors to curing storage 8. Multi tray curing storage (3 levels) 9. Infeed to EUROPLAN 4V-S120 planer for laminations 10. Roll conveyor for storage of longitudinal laminations (4 layers) 11. Aligning station for longitudinal layer 12. X-CUT S200 cross-cut saw for cross layer laminations 13. Chain conveyor storage for cross layer laminations (3 layers) 14. Aligning station for cross layer 15. Vacuum layer assembly unit for Longitudinal Layer and Cross Layer 16. OEST controlled PUR (1 component polyurethane) glue application system 17. Solid fast movable PE coated  ...

Lead and Pull Spindle Lathe WEILER Condor - Original paint - Turning diameter over bed 330 mm - Turning diameter over support 170 mm - Turning length 800 mm - Tip height 160 mm - Spindle bore 38 mm - Spindle speeds 24-2800 rpm - Automatic longitudinal/face feeds - Tailstock MK3 - Emergency/Off - Total power requirement 3 KW - Three-cheek butter -Documentation - Multifix with insert - Electric lining protection - Work light - Swarf back wall Dimensions: LxWxH 1.9x0.9x1.5 meters / Weight 850Kg

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 130 x 50 mm Truss Type: PNB0443|1.5 Agraffe: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of trusses 2,417 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Offset printing machine Heidelberg GTO ZP 52, alcolor, machine number 696 173 N, + version, 19 million Print, in very good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

High-lift order pickers Manufacturer: OM Type: XOP2I Year of Make: 2009 Drive Control: MOSFET55re Operating hours approx.: 1,300 Drive: Electric Operation: Stand Load capacity: 1,100 kg Load centre : © 400/600 mm Load distance (x): 303 mm Wheelbase (y): 1,447 mm Net weight (incl. battery): 2,850 kg Axle load with drive/load side: 900/3,050 kg Axle load without load on drive/load side: 1,550/1,300 kg Height of mast retracted: 2,270 mm Stroke: 3,180 mm Height of mast extended: 5,520 mm Height above canopy (cab): 2,340 mm Stand height: 240 mm Additional stroke: 740 mm Stand height raised: 3,420 mm Height lowered: 65 mm Overall length: 3,187 mm Length, including fork back: 1,987 mm Overall width chassis: 880/900 mm Fork Zinc Dimensions: 60/120/1,200 Fork carriage DIN 15173, form A,B: welded Fork width: 660 mm Fork Outside Spacing. 560 MM Width above ...

HOBART Front Door Machine Year of manufacture 2018 with electronic program control Double-walled housing Capacity up to 30 baskets/h SMARTRONIC with 5 automatic programs 120 sec./240 sec./360 sec./>360 sec./hygiene program Automatic tank filling Sieve Contamination Sensor, Vacancy Indicator (Cleaner/Rinse Aid) Self-cleaning program! Water heater 15.3 Total connected load 21.6 Interior: W x D x H = 1,258 x 773 x 860 mm (with basket 825 mm) Water consumption 7.5 L / 9 L / 9 L Fuel tank capacity 130 L Heater performance: with cold water connection 400 V / 15.3 kW with hot water connection 400 V / 9.1 kW Total connected load: with cold water connection 21.6 kW / 3 x 35 A with hot water connection 15.6 kW / 3 x 35 A Pump capacity 2 x 2.9 kW / 2 x 1,150 l /min Basket dimensions 1,240 x 700 mm Insertion height 860 mm External dimensions: BTH 1375 x 945 x 1984/2 ...

Code: 0130 Brand: CENTAURO Model: CO 900 - CE Standard Band saw for cutting wood materials, joinery, furniture, custom furniture, window frames, plastics, aluminum, composite materials and various - CE Standard Technical data: Flywheel diameter mm 900 Max cutting height mm 550 Table height from ground mm 985 Table dimensions mm 1170 x 800 Min/max blade length 6100/6300 Motor Hp 5,5 Suction ports diameter mm 120 Tilting table Overall dimensions mm 1740 x 955 x 2700 h Weight kg 720

Arburg Allrounder 270S 250-60 Clamping force: 25 t Year of Make: 1999 Injection weight: 17 g Injection Unit 60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 cc Injection weight: 17 g L/D ratio of screw: 24.5 Clamping unit 250 Clamping force: 25 t Panel size: 400 x 400 mm Lights spar spacing: 270 x 270 mm Tool height: 200 mm Opening travel: 275 mm Maximum panel spacing: 475 mm Electrical connection (fuse): 120 l Weight: 1900 kg Control: Selogica equipment: -Sorting flap -Euromap 12 interface -Picker

Battenfeld HM 180 /525H/60V Clamping force: 180t Year of Make: 2009 Injection weight in hp: 175/20.8g Injection unit .../525/... 60 Screw diameter: 35/18 mm Spec. Spray pressure: 2743/2593 bar Injection volume: 193/22.9 cc Injection weight in hp: 175/20.8 g L/D Screw Ratio: 22/20 Clamping unit 180/... Clamping force: 180 t Lights spar spacing: 570 x 520 mm Tool installation height: 305 mm Ejector travel: 200 mm equipment: -Servo drive rotary table -3 x Hydraulic Core

Borche BH320 Clamping force: 320t Year of Make: 2017 Injection weight in hp: 771g Screw diameter: 60 mm Spec. Spray pressure: 1560 bar Injection volume: 848 cc Injection weight in hp: 771 g Cylinder heating capacity: 18.6 kW Clamping unit 320/... Clamping force: 320 t Size of the clamping plates: 960 x 960 mm Lights spar spacing: 665 x 665 mm Ejector force: 77 kN Tool installation height: 220...655 mm Opening travel: 580 mm Max. plate spacing: 1235 mm Ejector travel: 180 mm Weight: 12000 kg Dimensions(m) LxWxH: 7.0 x 1.8 x 2.4 m Control type: KEBA 1075

Machine name: Forklift Manufacturer: Toyota No. 7FBEST13 / 10932 Year of Make: 2010 Condition: used Hours: 5017 h No charger Load capacity: 1250kg Weight without battery: 2279kg Battery voltage 24 V Lifting height: 3010mm UVV without defects 01/25 Monthly maintenance carried out

Offer 25172 Specifications: - Automatic workflow cutting process, hydr. Raising / lowering the saw frame, mitre adjustment with manual clamping - Saw blade dimensions 3660 x 27 x 0.9 mm - Cutting speed infinitely adjustable 16 - 73 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 30° - 90° - at 90° around 305 mm - Square flat 360 x 305 mm - at 45° right about 305 mm - Square 255 x 305 mm - at 30° right square 175 x 305 mm - Hydr. Material Tension - Coolant device - Discharge roller conveyor with dimension stop 4000 mm - Drive 400 V / 3 kW - Space requirement approx. W 1150 x H 1600 x D 1800 mm - Weight approx. 750 kg

Offer 25129 Specifications: - Abrasive diameter 150 mm - Swivel head - grinding unit swivel + swivel on the articulated arm - Dust drawer - Disc speed infinitely adjustable - Table dimensions 1400 x 980 mm - Table height approx. 870 mm - Drive 400 V / 0.75 kW - Pneumatic connection 6 bar - Space requirement approx. W 1700 x H 1700 x D 1300 mm - Weight approx. 400 kg

Specifications: Speed: 800 1/min Power: 5.5 kW g-value: 391 Capacity G: 200 kg Capacity V: 120 dm³ Weight, approx.: 1700 kg

This is a 305GTP dry steam quick cooker from the premium manufacturer Hobart from 2018. The medium-sized 305 GTP dry steam rapid oven is often used in the field of mass catering. With its 3 x 1/1 GN inserts, it cooks up to 650 portions per hour fresh and accurate to the minute. The evaporation of the water and the associated increase in volume creates an atmosphere of saturated steam in the cooking chamber of the GTP, which ensures excellent heat transfer to the food. Saturated water vapor has great advantages in terms of transferable heat flux density compared to hot air or combination steam. Shorter cooking time means less nutrient loss and healthy food. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. The RRP for this device is €28,202 net. Our used equipment service for you - 6 months warranty ...

CNC Longitudinal Lathe Manufacturer :Star Machine type : SR 32 / 330 Year of manufacture : 1997 Control : - FANUC 16 TCNC Control Location : Hultfred Warehouse Sweden Availability : direct from stock Specifications Max. rod diameter: 32 \[mm\] Main spindle stroke: 310 \[mm\] Main spindle stroke with driven taper: 295 \[mm\] Spindle Power: 7.5 \[kw\] Main spindle speed : 350 – 7000 \[rpm\] C axis on main spindle Number of Turning Tool Holders: 6 Number of powered tool holders: 4 Driven Tools Speed: 350-5000 \[rpm\] Number of tool holders on the combi device: 4 maxi diameter in pick-up spindle: 32 \[mm\] Spindle speed counter spindle : 350-7000 \[rpm\] Power sub-spindle: 3.7 \[kw\] Indexing C-axis sub-spindle: 1° Pick-up spindle stroke: 125 \[mm\] Electrical connected load. : Power: 20 \[kW\] Dimensions: 1700 x 2515 x 1700 \[mm\ ...

1000 ESD open-fronted storage bins new Manufacturer: Transoplast Dimensions: 170x105x75mm Colour: black Stackable Negotiation price: € 4.00 net from stock Selling price per box: € 3.50 net from stock 20 pieces per carton Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Geared motor Article number: FDU1703 2359264 008 2KJ3101-1CE11-9FR1-Z ZF19-LA71MH4-L4N IP55 50HZ 1.73\1.0A 0.37KW S1 1370r\min n2:72.4r\min 11Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1702 2358249 005 2KJ3102-1DE22-2AP1-Z Z29-LE80MH4E-L16\10N IP55 50HZ - 60HZ 3.11\1.79A 1.72A 0.75KW S1 1440r\min 50HZ n2:99.0r\min 60HZ n2:120r\min 18Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1711-2398534 2KJ3102-1EK23-2HF1-Z Z29-LE80MH4E-L16\10N IP55 50HZ - 60HZ 3.11\1.79A 1.72A 1.1KW S1 1.27KWS1 1440r\min 50HZ n2:235r\min 60HZ n2:285r\min 18Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1711-2401485 2KJ3102-1EM23-2HA1-Z ZZ29-LE90ZLR4P IP55 50HZ - 60HZ 5.5\3.15 A 3.15A 1.5KW S1 1.75KWS1 1445r\min 50HZ n2:416r\min 60HZ n2:499r\min 20Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1703-2358223 2KJ3102-1FN23-2HA1-Z ZZ29-LE9100ZLSA4P-L16NH IP 55 50HZ - 60HZ 7.65\4.4A 4.35A 2.2KW S1 2.55KWS1 1465r\min 50HZ n2:419r\min 60HZ n2:507r\min 37Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1711-2401486 001 2KJ3501-6EM23-2HB1-Z BAZ29-LE90ZLR4P IP 55 50HZ - 60HZ 5.5\3.15 A 3.15A 1.5KW S1 1.75KWS1 1445r\min 50HZ n2:343r\min 60HZ n2:411r\min 22Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: 2KJ3102-1DF23-2HL1-Z FDU1703/2358250 002 ZZZ29-LE80ZMQ4P IP 55 50HZ - 60HZ 3.04A 1.68A 0.75 KW S1 0.86A 1450r\min 50HZ n2:143r\min 60HZ n2:173r\min 15Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1703-2358222 2KJ3102-1FN23-2HA1-Z ZZ29-LE9100ZLSA4P-L16NH IP 55 50HZ - 60HZ 7.65\4.4A 4.35A 2.2KW S1 2.55KWS1 1465r\min 50HZ n2:419r\min 60HZ n2:507r\min 35Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1711/2398533 020 2KJ3102-1EK23-2HF1-Z ZZZ29-LE90ZLSM4P IP 55 50HZ - 60HZ 1.1 KW S1 1440r\min 50HZ n2:235r\min 60HZ n2:285r\min 17Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1703/2358232 003 2KJ3502-7EK23-2HG1-Z BAZ39-LE90SM4P 50HZ - 60HZ 1.1 KW S1 1440r\min 50HZ n2:181r\min 60HZ n2:219r\min 24Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1703/2358228 001 2KJ3501-5EK23-2HD1-Z BAZ29-LE90SM4P 50HZ - 60HZ 1.1 KW S1 1440r\min 50HZ n2:281r\min 60HZ n2:340r\min 19Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: 2KJ3102-1DE22-2AP1-Z FDU1705/2370145 001 Z29-LE80MH4E-L16\10N 50HZ - 60HZ 0.75 KW S1 1440r\min 50HZ n2:99r\min 60HZ n2:120r\min 18Kg NEW and fully functional, from stock, see pictures for more details.

Transformer Dry Transformer Manufacturer : Schneider Type: DLPS10F - 0617T07001 The product is NEW and fully functional. see pictures for more details.

Dry Transformer Manufacturer: Schneider Type: DLPS10F - 0617T07001 The device is NEW and fully functional. see pictures for more details.