used 17 for sale

Arburg 470S 1300-350 Year of Make: 2001 Injection unit: Screw diameter: 35 mm Injection weight: 117 g Spray pressure: 2500 bar Dosing volume: 139 ccm Clamping unit : Clamping force: 130 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure Type of injection unit: Vario - This offers the possibility of using the injection unit, e.g. for side spraying The new injection unit is installed in the machine Metrics: Weight: 5100 kg Length/Width/Height: 4.45x1.49x2.17 m Drive: Pumps ...

New: MB 12 - SH | 1.2 Ton Mini Excavator | with Warranty Location: Poland | Availability: Pre-order Product Overview: We offer the MB 12 - S|H, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: open Technical Specifications Engine: Co-op D192F Power: 7.6 kW / 10.3 HP at 3,000 rpm Torque: 25.5 Nm at 2,880 rpm Fuel consumption: 275–280 g/kWh Cooling: Air-cooled Fuel type: Diesel Number of cylinders: 1 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working pressure: 160 ...

Arburg 470S 1300-350 Year of Make: 2001 Injection unit: Screw diameter: 35 mm Injection weight: 117 g Spray pressure: 2500 bar Dosing volume: 139 ccm Clamping unit: Clamping force: 130 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure Type of injection unit: Vario - This offers the possibility of using the injection unit, e.g. for side spraying The new injection unit is installed in the machine Metrics: Weight: 5100 kg Length/Width/Height: 4.45x1.49x2.17 m Drive: Pumps/mo ...

Arburg 420C 1000-290 with the Geiger MiniServo 0.5 sprue picker Year of Make: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 172 g Spray pressure: 1530 bar Dosing volume: 188 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap It is possible to change the screw diameter The machine has been regularly serviced by the authorised Arburg service provider Metrics: Weight: 3740 kg Length/Width/Height: 4.14x1.63x2.07 m Drive: Pumps/motor: 15 kW Heating capacity: 6.4 kW Total power: 21.4 kW All offered machi ...

Arburg 370M 1000-250 Year of Make: 1994 Injection unit: Screw diameter: 35 mm Injection weight: 121 g Spray pressure: 1750 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 100 t Tiebar spacing: 370x370 mm Size of the clamping plates: 545x545 mm Ejector: hydraulic Clamping unit: hydraulic Control: MULTRONICA Additional equipment: Euromap Robot Interface Core Pull X 1 Type of injection unit: Vario - This offers the possibility of using the injection unit, e.g. for side spraying Metrics: Weight: 3080 kg Length/Width/Height: 4.23x1.50x1.60 m Drive: Pumps/motor: 18.5 kW Heating capacity: 5.5 kW Cylinder heating: 24 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łód� ...

Arburg 370S 800-350 Year of Make: 2000 Injection unit: Screw diameter: 35 mm Injection weight: 117 g Spray pressure: 2500 bar Dosing volume: 139 ccm Clamping unit : Clamping force: 80 t Tiebar spacing: 370x370 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap Robot interface Hydraulic core pull x 2 Hardened injection unit - Bimetal Built-in sorting flap Integrated original Arburg sprue picker on the side Metrics: Weight: 3800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Ł� ...

Arburg 320K 700-100 Year of Make: 2001 Injection unit: Screw diameter: 30 mm Injection weight: 59 g Spray pressure: 1550 bar Dosing volume: 70 ccm Clamping unit : Clamping force: 70 t Tiebar spacing: 320x320 mm Size of the clamping plates: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Hydraulic core pull x 1 Hardened injection unit - Bimetal Central lubrication Original Arburg mould crane, 2 lifting speeds, lifting capacity 100 kg Metrics: Weight: 2170 kg Length/Width/Height: 2.94x1.45x1.99 m Drive: Pumps/motor: 11 kW Heating capacity: 4.9 kW Total power: 15.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Pr ...

Arburg 370E 600-290 / Electric motor / Operating hours: approx. 20,000 h in automatic mode Year of manufacture: 03.2015 Injection unit: Screw diameter: 40 mm Injection weight: 172 g Spray pressure: 1530 bar Dosing volume: 188 ccm Clamping unit: Clamping force: 60 t Tiebar spacing: 370x370 mm Size of the clamping plates: 510x510 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 20,000 h in automatic mode Euromap 67 Robot interface Air Valve x 2 Core train control Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Automatic tool height adjustment Central lubrication Metrics: Weig ...

Arburg 370E 600-290 / Electric motor / Operating hours: approx. 20,000 h in automatic mode Year of manufacture: 03.2015 Injection unit: Screw diameter: 40 mm Injection weight: 172 g Spray pressure: 1530 bar Dosing volume: 188 ccm Clamping unit: Clamping force: 60 t Tiebar spacing: 370x370 mm Size of the clamping plates: 510x510 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 20,000 h in automatic mode Euromap 67 Robot interface Air Valve x 2 Core train control Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Automatic tool height adjustment Central lubrication The machine is p ...

English: Model: MB12 Bucket capacity - 0.022 m³ Chassis width - 930 mm Track length - 1200 mm Chassis ground clearance - 370 mm Gradeability - 30° Track width - 180 mm Tank volume - 5.5 L Transport length - 2870 mm Excavator height - 2285 mm Overall dimension - 2870 x 930 x 2285 mm Engine model - Koop 192F / Kubota D722 Engine power - 7.6 kW / 2400 rpm; 10.2 kW; 10 kW / 420 cc Turning radius - 1490 mm Max. digging height - 2490 mm Max. dumping height - 1745 mm Max. digging depth - 1725 mm Max. digging radius - 3030 mm Max. vertical digging depth - 1655 mm Bucket digging force - 6.5 kN Operating weight - 1200 kg All machines are new and come with a one-year warranty. Additional attachments such as rakes, augers, buckets, or grapples can be added to your order if needed. You can choose from a variety of engines that vary in size and power accor ...

English: The MB 10-B is our most compact and lightweight model—ideal for projects requiring maneuverability in tight urban spaces or residential backyards. With a sturdy build and precise controls, it's a favorite for small-scale landscaping and trenching. Despite its compact frame, it offers impressive digging force and a smooth, reliable experience. Technical Specifications Weight: 1000 kg Dimensions: 2870 x 930 x 2213 mm Standard Bucket Capacity: 0.022 cbm Engine: KOOP 192 / Briggs & Stratton Power Output: 11.7 hp / 8.6 kW or 13.5 hp / 10.07 kW Issue Rating: EURO V Displacement: 0.499 / 0.794 L Cooling Method: Air-cooled Max. Digging Depth: 1720 mm Bucket Digging Force: From 6.5 kN Hydraulics: Permco TJ Gradeability: 30°

Arburg 320C 500-170 Year of Make: 2011 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Operating hours: approx. 35,000 h in automatic mode Control with air valve Core train control Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 2310 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pumps/motor: 11 kW Heating capacity: 9.4 kW Total power: 20.4 kW All offered machines are started by our service technicians before they are sold. It is possible to recei ...

Max. winder speed: 50 m/min Type: Film system 1600 mm usable width Equipment / Additional information: Max. gross output of up to 1300 kg/h A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm two nozzle lips: 0.2 to 1.8 mm & 1.4 to 3 mm Consists of: -Dosing system 5-chamber Maguire -Extruder (130 mm screw) Amut RIDUT.EA120 // Age: 2008 -Screen changer (for cleaning in food production) -Melt pump -Slot die 140 cm (2 inserts) (0.5 - 1.5 mm) (1.5 - 3 mm) -Calender 160 cm / Cooling & smoothing rolls -Post-cooling rolls (2 pcs.) -Winder (Film jam during roll jam) -Film draw-in -Film winders (3 pcs.) -Mill Rapid G200-48KURF // Age: 2014 Fully existing infrastructure; control cabinets, pumps, etc.

Arburg 320A 500-170 with the Sprue Picker / Electric Machine Year of Make: 2005 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit : Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Hardened injection unit - Bimetal Central lubrication Machine with built-in Arburg conveyor belt and original sorting flap Metrics: Weight: 3500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selecte ...

Arburg 320C 500-170 with the Wittmann W811 robot Year of manufacture: 12/2006 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap Robot Wittmann W811 Year of Make: 2010 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot at an additional co ...

Arburg 680CB 400-170 / Vertical injection moulding machine, tie-bar-less / Very good technical condition Year of Make: 2012 Injection unit: Screw diameter: 25 mm Injection weight: 54 g Spray pressure: 2500 bar Dosing volume: 59 ccm Clamping unit : Clamping force: 40 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Vertical Injection Molding Machine, Tibar-less Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 3 Control with hot runners x 12 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorised Arburg service provider Original Arburg tool crane Metrics: Weight: 6500 kg Length/Width/Height: 1.97x1 ...

Arburg 220-90-350 Year of Make: 1993 Injection unit: Screw diameter: 22 mm Injection weight: 32 g Spray pressure: 2400 bar Dosing volume: 38 ccm Clamping unit: Clamping force: 35 t Spar spacing: 221x221 mm Size of the clamping plates: 346x346 mm Ejector: hydraulic Clamping unit: hydraulic Control: HYDRONICA Additional equipment: Very good technical condition Operating hours: up to 25,000 hours The machine worked in a company that produced packaging for the food industry Metrics: Weight: 1700 kg Length/Width/Height: 3.31x1.75x1.50 m Drive: Pumps/motor: 11 kW Heating capacity: 3.5 kW Total power: 14.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On reque ...

Arburg 220-90-350 Year of Make: 1993 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spray pressure: 1860 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 35 t Spar spacing: 221x221 mm Size of the clamping plates: 346x346 mm Ejector: hydraulic Clamping unit: hydraulic Control: HYDRONICA Additional equipment: Very good technical condition Operating hours: up to 25,000 hours The machine worked in a company that produced packaging for the food industry Metrics: Weight: 1700 kg Length/Width/Height: 3.31x1.75x1.50 m Drive: Pumps/motor: 11 kW Heating capacity: 3.5 kW Total power: 14.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On requ ...

Engel Victory 500/110 Tech Ecodrive with the Sepro S5.15 robot / Hybrid machine / Operating hours: approx. in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 40 mm Injection weight: approx. 225 g Spray pressure: 2029 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 110 t Spar spacing: 0x0 mm Size of the clamping plates: 740x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Machine in very good technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 6 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Sepro S5.15 robot Year of Make: 2016 5-axis robot: ...

Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air Valve x 8 Hydraulic core pull x 5 Control with hot runners x 16 Reinforced Injection Units – Bimetal M ...

We offer formwork Peri Trio 270 x 120, 14 pieces with a 65% discount on a new value of €1,786.00/pc = special net price €625.10/pc. Frame top used condition, cleaned, primed and painted with zinc phosphate coating. The formwork is completely overhauled, with top used original Peri Finply formlining, checked and sorted. Sold individually, subject to sale! Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

We offer Peri Pep 20-400 galvanized, used - including original Peri stacking pallet. Special offer 42 x Peri ceiling props including frame = 1.638,00€ 42 pcs PERI Ceiling Prop PEP 20-400, galvanized, used 1 pc. Peri Pallet RP 0.80 x 1.50m galvanized, used The PERI PEP slab props are particularly characterized by their high load-bearing capacity and low weight. Due to a 100% hot-dip galvanizing, the tubular steel ceiling column has a long service life. The risk of injury is significantly reduced by a built-in crush protection of 10 cm. Due to the large adjustment range of 12 cm, frequent replugging is no longer necessary. The high-quality forged nut with hardened contact surface and two-way thread make loosening under full load much easier. All supports are checked and sorted - immediately ready for use. Only while stocks last. Subject to prior sale. If you have  ...

We offer Peri Trio Elements 270 x 240 with 50% discount newly covered with original Peri Finply formlining 32 x Peri Trio Element TR 270 x 240 á 3409,00€ - 55% Discount = 1704,50€ / Piece Net price You bid on 1 element Peri Trio 270 x 240 sold separately. Subject to sale Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

We offer a position 362.96m² Peri Maximo 330 complete with accessories. Partly covered with new record. New value: approx. 282,928.50€ Special net price: 106.972,35€ + VAT The formwork was cleaned, checked and corrosion-sealed with zinc phosphate primer. Ready for immediate use for SB2/3 Pcs. Description 26 Element MX 330 x 240 2 Element MX 330 x 120 6 Element MX 330 x 120 5 Element MX 330 x 90 3 Element MX 330 x 90 12 Element MX 330 x 60 3 Element MXM 330 x 60 6 Element MXM 330 x 60 8 Element MX 330 x 30 8 Inner corner MXI 330 x 50/20 2 Outer corner 330 x 90 4 Outer Corner MXA 330 x 35 3 Articulated Corner MXGI 330 3 Articulated Corner MXGA 330 2 Wall Thickness Compensation WDA MX 330 x 4 15 Wall Thickness Compensation WDA MX 330 x 5 1 wall thickness compensation WDA MX 330 x 6 2 Wall Thickness Compensation WDA MX 330 x 10, Alu Total: €79,656.00  ...

We offer the following Doka Framax elements: Doka Framax Xlife 1,35 x 2,70m with 80% discount = 382,20€/pc net. 80 x Framax Xlife element 1.35x2.70m Accessories available on request. With plastic formwork lining Ready to use, suitable for higher-value applications. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

We offer a Doka Frami 2.70m wall formwork complete with accessories. The formwork is cleaned, checked and ready for immediate use. Original Doka rental storage quality. Suitable for higher-value applications. 50 588481500 Frami Xlife element 0.90x2.70m 10 58844950 Frami Xlife Element 0.75 x 2.70m 20 588465500 Frami Xlife element 0.60x2.70m 10 588482500 Frami Xlife Element 0.45x2.70m 15 588483500 Frami Xlife element 0.30x2.70m 4 588485000 Frami Inner Corner 2.70m 20cm 4 588461000 Frami outdoor corner 2.70m 400 588433000 Frami tensioner 20 588436000 Frami compensating clamp 20 588439000 Frami Clamping Rail 0.70m 40 588441000 Frami Clamp 20 588442000 Frami Console 60 20 584335000 railing 1.00m 100 SFS Prestressing Steel 0.85m 200 SFS Galvanized Nut Joint Plate, new 3 583011000 Doka reusable container 1.20x0.80m The quantities will still change, and elements a ...

Doka accessories, new - with a 20% discount on the new price! New: 30 x Exposed Concrete Tray 15,05cm - 32,48€/pc 30 x Flow disc Rd28 - €27.76/pc Can be used in the following systems: -Exposed joint - Anchor system 15.0 - Folding platform K If you have any questions, please call 0176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

We offer props Doka slab prop Eurex 30 eco 300 NEW! Doka ceiling prop Eurex 30 eco 300 NEW at 51.90 EUR/unit. Doka stacking pallets, new a. 170,00EUR/piece always 40 pieces / stacking rack. We offer new Doka floor prop Eurex 30 eco 300 Original price = 122,00€ 1400 pcs. available now! – 51,90€/pcs. special net price Doka stacking pallet 1.55x0.85m, new – €170.00/pc Doka's tested Eurex 30 eco quality prop is characterised by a high minimum load capacity of 30 kN and complies with column class C/E in accordance with the EN 1065 standard. In addition, the steel prop convinces with its simple and safe handling, as well as with its convincing price-performance ratio. Product: • Column class C/E according to standard EN 1065 • General building authority approval Z-8.311-942 • High load capacity of up to 41.2 kN depending on extension length, minimum load c ...

We offer a refurbished Peri Trio 270 formwork 198.28m² complete with accessories as follows. Frame cleaned, corrosion sealed with zinc phosphate coating. New original Peri Finply formlining. Accessories new, or Peri rental storage quality. New value approx. 145766,50€ Special net price 64706,00€ approx. 56% discount Pcs. Description 16 Element TR 270 x 240 new frames, new formlining 8 Element TR 270 x 120 new formlining 8 Element TR 270 x 90 new formlining 4 Element TR 270 x 72 top used formlining 4 multi-purpose elements TRM 270 x 72 new formlining 10 Element TR 270 x 60 new formlining 8 Element TR 270 x 30 new formlining 2 stripping elements TR 270x 24 new formwork lining 6 Corner TE 270-2 new formlining Accessories TRIO 130 Richtschloss BFD, verz. 30 TAR 85 compensating bolts 16 Scaffolding bracket TRG 80 2 Moving hooks MAXIMO 1.5 t new 1 new MX trans ...

Falch Pressure Washer R10/800, 1000 bar; only 2939 hours in use; complete with accessories as well as two rotary guns. Price basis for negotiation: 15.000,00€ net! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

We offer Peri Trio formwork accessories, used Balancing latch TAR 85, 65% discount on new price for 68,08EUR net 405 x Balancing Bolt TAR 85 a 68,08EUR You are bidding on 1 piece Prices are excl. VAT and transport Subject to sale If you have any questions, please contact Mr. Becker at 0176-700 44689 Purchase and sale of scaffolding, formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office warehouse address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

We offer Peri Pep 30-250 galvanized, used - including original Peri stacking pallet. Special offer 42 x Peri ceiling props including frame = 1.218,00€ 42 pcs PERI Ceiling Prop PEP 30-250, galvanized, used 1 pc. Peri Pallet RP 0.80 x 1.50m galvanized, used The PERI PEP slab props are particularly characterized by their high load-bearing capacity and low weight. Due to a 100% hot-dip galvanizing, the tubular steel ceiling column has a long service life. The risk of injury is significantly reduced by a built-in crush protection of 10 cm. Due to the large adjustment range of 12 cm, frequent replugging is no longer necessary. The high-quality forged nut with hardened contact surface and two-way thread make loosening under full load much easier. All supports are checked and sorted - immediately ready for use. Only while stocks last. Subject to prior sale. If you have  ...

We offer a position 410,67m² Peri Maximo 270 complete with accessories. Partly covered with new record. New value: approx. 351,690.00€ Special net price: 132.955,13€ + VAT The formwork was cleaned, checked and corrosion-sealed with zinc phosphate primer. Ready for immediate use for SB2/3 Pcs. Description 11 Element MX 270 x 240 new formlining 16 Element MX 270 x 240 2 Element MX 270 x 120 new formlining 9 Element MX 270 x 120 7 Element MX 270 x 90 3 Element MX 270 x 60 new formwork lining 2 Element MX 270 x 60 4 Element MX 270 x 30 new formwork lining 2 Element MX 270 x 30 6 Multi-purpose element element 270 x 60 3 Element MX 270 x 45 new formwork lining 34 Element MX 270 x 45 14 Inner corner MXI 270 x 60 2 Shaft Corner 270 MXSE 1 Outer Corner MXA 270 x 45 12 Outer Corner MXA 270 x 35 4 Outer Corner MXA 270 x 90 4 Articulated Corner MXGA 2 ...

Doka Framax 330 wall formwork 297.33m² with accessories. Partly recovered with Finply formlining. New value approx. 225,325.00€ Special net price: 80.100,13€ Formwork completely cleaned, checked and sorted. Formwork lining fair-faced concrete class 2/3 possible without any problems. Ready to use, suitable for higher-value applications. Pcs. Description 14 Framax Xlife-Element 2.70x3.30m, new Finply 2 Framax Xlife element 1.35x3.30m 14 Framax Xlife element 1.35x3.30m, Doka rental storage quality 1 Framax Xlife element 0.90x3.30m 5 Framax Xlife element 0.90x3.30m, Doka rental warehouse quality 4 Framax Xlife-Uni-Element 0.90x3.30m, new Finply 1 Framax Xlife element 0.60x3.30m 9 Framax Xlife element 0.60x3.30m, Doka rental warehouse quality 4 Framax Xlife element 0.55x3.30m, Doka rental warehouse quality 6 Framax Xlife element 0.45x3.30m 8 Framax Xlife el ...

We offer Noe Top 2000 wall formwork in ready-to-use condition. The elements are galvanized and covered with plastic formwork lining. Price without accessories 59,00€/m² net. 20 panels 2650 x 3310 4 panels 2650 x 2650 52 board 2650 x 1325 14 panels 2650 x 125 4 panels 2650 x 100 1 board 2650 x 75 3 panels 2650 x 49 1 board 2650 x 40 The formwork is compatible with the Doka Framax and so are the accessories. Doka accessories available on request. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.d ...

We offer 24 pieces of Dokamatic ceiling tables 2.50 x 5.00m with a 75% discount on the new value of €3,395.00. Retail price 848,00€/piece. The Dokamatic ceiling tables are checked and sorted and ready for immediate use. All prices excl. VAT + transport Subject to sale. If you have any questions, please call 0176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

We offer a Noe Top 2000 wall formwork in an immediately ready for use condition. The elements are largely galvanized and covered with plastic formwork lining. Price without accessories 99,00€/m² Pcs. Designation 60 panels 2650 x 3310 4 panels 2650 x 2650 52 board 2650 x 1325 14 panels 2650 x 125 4 panels 2650 x 100 1 board 2650 x 75 3 panels 2650 x 49 1 board 2650 x 40 4 panels 250 x 3310 2 panels 400 x 3310 10 panels 450 x 3310 12 panels 490 x 3310 20 panels 500 x 3310 11 panels 550 x 3310 3 panels 610 x 3310 2 panels 750 x 3310 8 panels 1000 x 3310 8 panels 1250 x 3310 9 panels 1320 x 3310 15 IU 3310 The formwork is compatible with the Doka Framax and so are the accessories. Doka accessories available on request. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction ma ...

We offer Peri Pep 20-500 galvanized, used - including original Peri stacking pallet. Special offer 30 x Peri ceiling props including frame = 1.347,00€ 30 pcs PERI Ceiling Prop PEP 20-500, galvanized, used 1 pc. Peri Pallet RP 0.80 x 1.50m galvanized, used The PERI PEP slab props are particularly characterized by their high load-bearing capacity and low weight. Due to a 100% hot-dip galvanizing, the tubular steel ceiling column has a long service life. The risk of injury is significantly reduced by a built-in crush protection of 10 cm. Due to the large adjustment range of 12 cm, frequent replugging is no longer necessary. The high-quality forged nut with hardened contact surface and two-way thread make loosening under full load much easier. All supports are checked and sorted - immediately ready for use. Only while stocks last. Subject to prior sale. If you have  ...

We offer MX adjustment console in top condition! New value = 192,00€ - minus 60% discount = 76,80€/pc. The goods were only used 1 x. For the installation of PERI panel formwork up to H = 4.50 m. Hint Follow the operating instructions! Height adjustment ± 5 cm. Offer only valid while stocks last. Subject to prior sale. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

Aircooled chiller CIAT AQUACIAT2 EVO LDC 240 V 61 kW Cooling capacity: 61 kW / 17.35 tons (12/7 — 35°C) Year of manufacture: 2013 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. COPELAND ZP137KCE-TFD-455 (scroll) Type of refrigerant: R410a Number of fans: 1 pcs. Hydraulic module: 1 pcs. water pump Wilo BAC 40-134-2.2, expansion vessel 18 L. Dimensions: 2x1.05x1.77 m Weight: 629 kg Working hours: 1253/1253 h. Condition: Good

Sorter for light loads, Optimus, SORTING SYSTEM OPTISORTER HORIZONTAL, 200 trays, 261 targets - used - : Price sorter incl. control, continuous roller conveyors and pick by light (without conveyor technology) from location: 99.500.-€ (net), incl. dismantling, packed and loaded! Price of the existing Transnorm conveyor technology (approx. 170m) incl. scanner and labeller: 15.000.-€ (net) incl. dismantling, packed and loaded! Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Type: OPTISORTER HORIZONTAL Year of Make: 2013 • UNIQUE PUSH TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Control: Siemens S7 Layout: OS-680113-264-D01 System capacity: 6000 trays/h Total length of the system: 53 m Total width of the system: 14 m Number of infiltration stations: 1 Width of infiltration station: 2 m Number of trays: 200 pieces Usable size on the trays ...

Graule Pull saw Cutting length 130mm Cutting width 400mm Saw blade diameter 350mm Swivels horizontally, left right 45° vertical 45° Suction nozzle diameter 80mm Motor 2kW 400V 50Hz G&-5179-o3185

The BTS-MF650 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 650 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 650 kg (material depending) Bale size: 1100 H (var.) x 1500 W x 1100 D mm Machine size: 3217 H x 2100 W x 1524 D mm Machine weight: 1930 kg Transport height: 2500 mm Loading aperture: 1500 W x 770 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the  ...

The BTS-MF550 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 550 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 550 kg (material depending) Bale size: 1200 H (var.) x 1500 W x 800 D mm Machine size: 3217 H x 2115 W x 1200 D mm Machine weight: 1650 kg Transport height: 2500 mm Loading aperture: 1500 W x 770 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the m ...

The BTS-MF250 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 250 kg. With a crush insert baler is even suitable for crushing individual small and large drums and also other sheet metal containers. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 15 Ton Bale weight: up to 250 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 2900 H x 1759 W x 1185 D mm Machine weight: 985 kg Transport height: 2250 mm Loading aperture: 1200 W x 680 H mm Cycle times: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phas ...

The BTS-MF40 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 40 kg. The baling press impresses with its ease of use, safe operation, it is ideal for small material volume and producing compact and easy-to-handle bales. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 2 Ton Bale weight: up to 40 kg (material depending) Bale size: 600 H (var.) x 535 W x 460 D mm Machine size: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Loading aperture: 522 W x 490 H mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for easy  ...

Offer 25128 Specifications: - Rated power at 50% ED 25 kVA - Max. welding power 68 kVA - Adjustable projection 280 to 450 mm - Stroke 5 to 40 mm - Welding values of sheet steel approx. 3 + 3 mm - Electrode force adjustable up to 240 daN - Required air pressure 6 bar - Cooling water volume 4 l/min - Connection 400 V - Space requirement approx. W 800 x H 1700 x D 1050 mm - Weight approx. 220 kg - with: - Single-phase control T 90 Mark II - E. foot switch - Separate cooling water recooling unit

Code: 0087 Brand: LEVIGALTECNICA Model: 1300 SRN Automatic 1-belt wide belt sander for furniture, custom-made furniture, panels, wooden frames, doors and various Technical data: Working width mm 1300 Working height min/max mm 3-175 Calibrating/Sanding rubber roller diameter mm 250 Motor Hp 25 Brackets holding small parts Belt size mm 1900 x 1330 Automatic table positioner Electronic positioning display Belt feed at 2 speeds 2 infeed support rollers 2 outfeed support rollers Overall dimensions mm 2100 x 1600 x 1950 h Weight kg 2300

Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500

Arburg Allrounder 270S 250-60 Clamping force: 25 t Year of Make: 1999 Injection weight: 17 g Injection Unit 60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 cc Injection weight: 17 g L/D ratio of screw: 24.5 Clamping unit 250 Clamping force: 25 t Panel size: 400 x 400 mm Lights spar spacing: 270 x 270 mm Tool height: 200 mm Opening travel: 275 mm Maximum panel spacing: 475 mm Electrical connection (fuse): 120 l Weight: 1900 kg Control: Selogica equipment: -Sorting flap -Euromap 12 interface -Picker