used 23 for sale

Approximately 140 halogen bell lamps, used but in good condition condition, Side brand, Minitower model, V230, Hz50. For information contact Mercury Auctions

N. 230 half-length mannequins, white, in plastic material, mostly for women For information contact Mercury Auctions

TECHNICAL SPECIFICATIONS: Clamping Force: 650 ton Shot Weight (Max): 2375 g Distance Between Tie-Bars (H): 1100 mm Distance Between Tie-Bars (V): 960 mm Platen Size (H): 1510 mm Platen Size (V): 1440 mm Screw Diameter: 90 mm Mould Height (Max): 950 mm Mould Height (Min): 450 mm Daylight Between Platens (Max): 1850 mm Opening Stroke (Max): 1400 mm Ejector Force: 9,50 ton Ejector Stroke: 250 mm Screw L/D Ratio: 25 Screw Speed: 190 rpm Screw Torque: 5000 N·m Injection Volume: 2610 cm³ Injection Pressure: 1583 bar Injection Rate: 751 cm³/s Nozzle Force (Max): 15 ton Nozzle Stroke (Max): 700 mm Plasticising Capacity: 123.50 g/s Heating Zones: 9 Heating Capacity: 46.40 kW

Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...

SIM SF 500 Vibratory Spiral Conveyor SIM SF 500 Vibratory Spiral Conveyor with SIM BB-20 Belt Hopper and AKB DTB-UU-750/20 Linear Conveyor SIM SF 500 Vibratory Spiral Conveyors 230 V 50 Hz Diameter: 500 mm SIM BB-20 Belt Hopper 20 liters Filling volume: 20 litres Max. filling weight: 35 kg Chute width: 80 mm Belt speeds: 0.1 - 0.6 m/min Bunker tray, chute: stainless steel Drives: AC gear motor 230V/50Hz AKB DTB-UU-750/20 Linear Conveyors Delivery without enclosure More items - new and used - can be found in our shop! International shipping costs on request!

Dough Divider Kemper Imperator II MB - With 2300 chamber - Weights from 400grams to 2300grams - Completely clad in stainless steel Kemper Imperator dough divider weigher with stainless steel hopper. The machine is in good visual and technical condition and can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request.

- Manufacturer: Smith Detection - Type: Pack430 - Voltage: 230 VAC 1Ph - Amperage: 16 amps - Frequency: 50/60 Hz - Fuse: 20Amp - SCCR: 5000A - Year of construction 05- 2008

Travel ranges X/Y/Z: 400 / 300 / 140 mm Table clamping surface WxD : 700 x 375 mm Passage: 200 mm Dimensions WxDxH: 769 x 836 x 901 mm Traversing speed X/Y/Z max. 6 m/min. (for KG drive 16x10) max. 3.6 m/min. (for KG drive 16x4) Ball screws 16x10 / 16x10 / 16x10 mm, backlash-free adjustment (optionally 16x4 mm in X/Y/Z) Guidances Linear units with precision steel shafts and recirculating ball slides, adjusted without backlash Control EdingCNC with 3 power amplifiers 48V/4.2A, integrated control computer and power supply 500 W with processor board EdingCNC software, compatible with Windows® Connected loads: 230V, 16A The iCP 4030 milling machine is ideally suited for processing materials such as plastic, foam, wood and circuit board materials and is therefore particularly predestined for use in vocational schools, training institutions, small serie ...

Injection Molding Machines KRAUSS MAFFEI KM 420-1900 C2 Stock No.: 503535 Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 C2 Control: MC 4 Year of Make: 2005 Operating hours: 59000 h Technical data closing page Clamping force: 4200 kN Wooden dimension h x v: 800 x 800 mm Panel size h x v: 1270 x 1200 mm Min. installation height: 580 mm Plate spacing max.: 1300 mm Opening travel: 720 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of movable plate D: 200 mm Centering of fixed plate D: 200 mm Tool weight: 6700 kg Technical Data Spray Side Screw diameter: 60 mm Displacement: 769 cc Spray pressure: 2200 bar Screw length: 23 l/d Screw speed: 285 min Plasticizing current: 70 g/s PS Outdoor injection flow: 700 g/s hp Number of heating zones: 6 Dimensions & Weight Machine dimensions LxWxH: 6.83m x 2.33m x 2.48m Total Weight: 23090KG Equipment Scree ...

KRAUSS MAFFEI KM 420-1900/55 CZ 2 Component Machine Stock No.: 503534 Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 55 CZ Control: MC 4 Year of Make: 2004 Operating hours: 76000 h Technical data closing page Clamping force: 4200 kN Wooden dimension h x v: 800 x 800 mm Panel size h x v: 1270 x 1200 mm Min. installation height: 380 mm Plate spacing max.: 1400 mm Opening travel: 1020 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of movable plate D: 200 mm Centering of fixed plate D: 200 mm Tool weight: 6700 kg Technical Data Spray Side Screw diameter: 70 mm Capacity: 1047 cc Spray pressure: 1778 bar Screw length: 20 l/d Screw speed: 527 min Plasticizing current: 95 g/s PS Injection flow to the outside: 953 g/s hp Number of heating zones: 6 2. Aggregate 55 with ø 22 Spray pressure: 1674 bar Volume: 30cm³ Distance sprayer 1 to 2: 300 mm (pig ...

59 Pcs. Machine Feet / 7 Models - for leveling machines of all kinds - 23x 250/150/90 mm - 18x 200/120/100 mm - 6x 250/150/100 mm - 3x 240/100/80 mm - 4x 150/150/50 mm - 2x 250/115/70 mm - 3x 200/200/60 mm

Meba ECO 335 DGA - Automatic band saw - Material feed up to 600 mm - Year of construction: 2002 Specifications - Cutting range 90° round/flat: 335 / 500x335 mm - Mitre right 45° round/flat: 330 mm / 320x335 mm - Mitre right 30° round/flat: 200 mm / 200x335 mm - Clamping range bundle tension width/height: 0-500 mm / 15-335 mm - Single/Multiple Material Insertion: 0-600 mm / 0-9999 mm - Leftover piece length manual/automatic: approx. 70 mm / approx. 110 mm - Cutting speed: 15 - 150 m/min (AC drive) - Cutting pressure: infinitely hydraulic - Lowering speed: 0 - 300 mm/min (infinitely variable) - Saw blade dimensions: 4400 x 34 x 1.1 mm - Saw blade tension: with torque wrench - Max. contact weight: max. 250 kg/m - Working height: 750 mm - Noise emission: 74 dB(A) Connection data: - Power supply: 3x 400 V / N / PE / 50 Hz - Compressed air: 6 - 8 bar, min. 50 l/min  ...

Special price € 4,100 instead of 4,930 excl. VAT Solberga SE2030 - Gear drilling machine (new) Recording: MK3 Capacity: 30 mm - The drill head can be swivelled 360° around the column and is height-adjustable. - The gearbox is built with our traditional and tested technology for the highest possible torque. Helical gears in combination of steel and reinforced fiber material provide a high degree of efficiency, a low noise level, as well as a long service life and an almost maintenance-free transmission. - The spindle is made of steel and ensures optimal concentricity of the tool thanks to its adjustable tapered roller or ball bearing. The machine has an adjustable spindle return spring. This allows the restoring force to be adapted to the weight of the tool. - Automatic feed (M model) - When the preset drilling depth is reached, the spindle returns to its original positio ...

Deckel FP4MA 2204 - CNC Tool Milling Machine - 2022 refurbished - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Power-operated tool clamps horizontally and vertically - Automatic speed manual transmission - Automatic clamping in the X, Y and Z axis - Automatic central lubrication - Coolant device - Direct displacement measurement - Anti-collision clutch in the Y and Z axes - Year of construction 1988 - Incl. tool holders, drilling/milling tools & tool trolleys Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head can be moved manually on the headdle block: 150 mm Main Drive: - Pole-switchable three-phase brake motor: manual  ...

Deckel FP3A 2820 - CNC Milling Machine - Deckel Contour 3 CNC control - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Hydraulic tool clamp - Automatic speed manual transmission - Automatic clamping in X/Y/Z axes - Automatic central lubrication - Coolant device - Direct displacement measurement - Collision protection clutch in Z/Y axes - Built in 1987 Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke vertical: 80 mm Cpovd9Rv - Vertical milling head can be moved to the headrest: 150 mm Main Drive: - Motor: pole-switchable three-phase brake motor and manual transmission with clockwise/counterclockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Level Jump: 1.25 - Tool holder: SK40 (M16) - Tool  ...

750 pcs Grinding Wheels - Mixed Lot / Large Batch - Various sizes, shapes and materials - The following sizes and quantities as well as many other grinding wheels are available: 45x 40 / 40 / 9 22x 50 / 10 / 10 1x 50 / 25 / 15 12x 50 / 35 / 22 7x 70 / 35 / 14 7x 75 / 10 / 8 34x 100 / 20 / 24 18x 100 / 20 / 25 3x 125 / 13 / 25 3x 125 / 25 / 32 7x 125 / 30 / 32 4x 150 / 50 / 50 14x 175 / 10 / 20 5x 175 / 10 / 32 38x 175 / 100 / 76 85x 175 / 11 / 48 6x 175 / 15 / 20 5x 175 / 30 / 20 1x 175 / 30 / 40 5x 175 / 35 / 20 12x 175 / 60 / 48 1x 175 / 60 / 65 15x 175 / 9 / 48 11x 200 / 10 / 48 16x 200 / 10 / 76 5x 200 / 20 / 20 5x 200 / 20 / 25 4x 200 / 25 / 32 2x 200 / 75 / 48 5x 245 / 30 / 82 144x 250 / 15 / 76 1x 250 / 15 / 82 1x 250 / 20 / 32 1x 250 / 20 / 75 2x 250 / 25 / 50 1x 250 / 30 / 50 2x 250 / 35 / 82 2x 250 / 40 / 38 28x 300 / 10 / 125 1x 30 ...

Ergomat TNG 32 + LNS Sprint 552 - Turning Center + Bar Feeder - FANUC 0i-TF CNC control - 60° inclined bed - Cross slides with linear guides - Parts separators - Coolant device -Conveyor - Switch-on time: 645 hours - Processing time: 390 hours - Year of construction 2022 LNS Sprint 552 - Bar Feeder - Rod Ø: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar passage Ø: 32 mm - Spindle speed max.: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Workspace: - Workpiece Ø/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Cross slide Gang Type: - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank Ø: 20 mm - Tool holder 4-point: 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Powe ...

Mycrona Magnus II 600 - CNC Coordinate Measuring Machine - Machine foundation and bridge made of granite - incl. 3D CAD-capable PC Demis software - incl. TP200 probing system - All axles air supported - Ball screw drive - Haidenhain Glass Scales - Large measuring range - 2 quills independently - Machine serviced and tested - Year of construction: 2002 Specifications - Measuring range: 600 x 600 x 300 mm - Working air pressure: 6.5 bar - Air consumption: 80 Nl/min at 5 bar - Dimensions WxHxD: approx. 1550 x 2300 x 1700 mm - Weight: approx. 2200 kg

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2001 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW - Power DC motor Z-axis: 6.8 Nm - Power DC motor X-axis: 3.4 Nm - Motor pump power: 0.57 ...

Galvanized steel tank 230 cm long Diameter approx. 80 cm Delivery Please inquire with city and zip code and whether unloading is possible

are selling a used Jungheinrich EMC 110 stacker. Nominal load capacity: 1000 kg A charger is integrated and can be charged via a 230V socket The battery is tested and in good condition.

Delivery rate 4.61 m³/min at 10 bar Delivery rate 5.23 m³/min at 8 bar Operating pressure 10 bar Nominal power 30.0 KW Operating hours 14,279 Load hours 11,148 Compressed air connection G1 1/4 Sound level 69 dB(A) Space requirement L - 1,400 x W - 830 x H - 1,640 mm Weight approx. 850 kg

FANUC Arc Mate 120iC/12L robotic welding station was built in 2016. This system enables fully automatic welding of workpieces using MIG/MAG and TIG methods. The machining process is performed by a reliable industrial robot, which, in combination with two positioners, enables the machining of parts with even the most complex shapes. The robotic welding station is fully complete and consists of the following components: – robot arm: FANUC Arc Mate 120iC/12L – controller: FANUC R-30iB – welding positioner: PEH 1-250 (2 pcs.) – welder: LINCOLN POWER WAVE S500 – liquid-cooled welding torch: ABICOR BINZEL ABIROB W500/45 – cooling unit: LINCOLN COOLARC 50 – welding torch cleaning station: ABICOR BINZEL BRS-CC – wire feeder: LINCOLN 4R100 AUTODRIVE – welding wire reel cassette – light curtains: SICK – operator’s panel (2 pcs.) – control cabinet – cover ...

CORMAK KEP 150-300 plasma cutting machine was built in 2021. The machine is also known as KT7 CNC SILVER 15/30 or CORMAK V-CUT BASIC 1530. The KEP 150-300 plasma cutting machine is distinguished by the use of state-of-the-art technology. The machining process is performed on a water- or other coolant-filled table with a large work area. This solution eliminates the need for filtration systems, as well as the need to undertake further secondary processes, such as grinding. Furthermore, to guarantee maximum corrosion protection, all components have been fully galvanised. The offer also includes equipment, consisting of, among others, an intuitive CNC control and an inverter plasma cutter. The CORMAK plasma cutting machine weighs just 700 kg. Technical specifications of the CORMAK KEP 150-300 plasma cutting machine - CNC controller - work table dimensions (L x W): 3010 x 1510 mm  ...

CITIZEN M32 V CNC sliding head lathe was built in 2003 in Japan by CITIZEN WATCH CO., LTD. The machine is used for precision 8-axis machining of workpieces of even the most complex geometries. All machining processes, i.e. precise drilling, threading and turning are performed by 2 reliable spindles and tools taken from 3 capacious tool stations. What’s more, the specially designed bed with high thermal stability perfectly reduces the influence of heat, increasing the service life of all components and cutting tools. The offer also includes a wide range of equipment that significantly extends the machine’s machining capabilities and guarantees excellent repeatability of the manufactured parts. This includes e.g. an advanced CNC controller with many useful functions, such as self-diagnosis and program backup. All this makes the CITIZEN M32V swiss-type lathe the best choice for many  ...

XSA100GFQ 100 kW gas generator was built in 2023 in China by Xinsheng An Power Technology (Shandong) Co., Ltd. This unit is indispensable in the event of power cuts or in conditions where there is no electricity supply. The extremely powerful 100 kW motor converts mechanical energy into electrical energy, ensuring uninterrupted operation of machinery and industrial systems. The engine is powered by LPG gas, which significantly extends the life of the engine and is also much more environmentally friendly. In addition, all other components of the unit meet the most important global quality and emission standards. The 100 kW generator weighs 2860 kg. The XSA100GFQ gas generator set consists of the following parts: – WP6D132E300NG engine – XSA 100 alternator – HGM6110 control system with remote control module – charger – battery Technical specifications of the XSA100GFQ  ...

DURMA MS 2504 mechanical guillotine shears were built in 2014 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, designed for precision cutting of workpieces with a maximum thickness of 4 mm, offers high reliability, precision and efficiency. Sheets made of among others stainless steel, copper or aluminium, are machined using high-quality cutting knives with adjustable gap between blades. Daily operation of the machine, on the other hand, is facilitated by the convenient foot switch and intuitive NC control. The DURMA guillotine shears weight 3230 kg. Technical specifications of the DURMA MS 2504 guillotine shears - NC control - maximum sheet metal length: 2550 mm - maximum sheet metal thickness: 4 mm - cutting angle: 1°30′ - number of strokes: 42/min - back stop stroke: 1000 mm - foot switch control - motor power: 7.5 kW - power supply: 3x 400 V; 50 Hz  ...

DEMAG ERGOTECH EXTRA 80-430 injection moulding machine was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and sizes, using the injection moulding method. This method involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, guarantee high repeatability of the manufactured parts. The DEMAG ERGOTECH 80-430 EXTRA injection moulding machine weighs 3600 kg. Technical specifications of the DEMAG ERGOTECH EXTRA 80-430 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 40 mm - screw length/diameter ratio: 20 L/D - maximum injectio ...

KT7 CNC KVPG 150-300 VOLCUT plasma cutting machine was built in 2020. This extremely powerful machine is the perfect choice for precision cutting of workpieces with a maximum thickness of 50 mm. This is all due to the use of a number of innovative technologies that significantly improve the production processes with maximum ease of operation. The sheets are machined on a water or other coolant-filled water table by means of two torches (an oxygen torch and a plasma torch). Each torch is equipped with a special TSC (Torch Sensor Control) double-basing system, which protects them from accidental damage. Machining under water in turn eliminates the need for filtration systems, as well as undertaking further secondary processes, i.e. grinding. Furthermore, in order to prevent rust, the KVPG 150-300 VOLCUT plasma-oxygen cutting machine has a fully galvanised design. The VOLCUT 150-300 p ...

GILDEMEISTER TWIN 65 CNC automatic lathe was built in 2005 in Germany by GILDEMEISTER Drehmaschinen GmbH. The machine is used for precise, multi-axis machining of workpieces with complex geometries. To increase overall production efficiency, a combination of two spindles and two 12-position turrets with excellent technical specifications are used inside the large working area. Both spindles feature a C-axis with a high indexing accuracy of ± 0.002 mm, which facilitates complex machining operations that require precise positioning of the workpiece. All this is complemented by an intelligent SIEMENS CNC control with an intuitive interface. The GILDEMEISTER CNC turning center weighs 10000 kg. Technical specifications of the GILDEMEISTER TWIN 65 CNC lathe General data - number of axes: 8 (X1, X2, X3, Y1, B, Z1, Z2, Z3) - feed in the X1/X2/X3 axis: 300/180/175 mm - feed in the Y1/B ax ...

GABELLA MACCHINE slitting line was built around 1990 in Italy by GABELLA MACCHINE S.p.A.. The machine enables precise cutting of steel and aluminium sheets into evenly sized strips. For this task, cutting rollers with special roller knives are used, which guarantee the highest cutting precision and optimum utilisation of the raw material. The finished strips of material are wound onto coils ready for further machining. The slitting line is offered with a set of new roller knives and reconditioned ejector rings. The total weight of the machine is about 7000 kg. Technical specifications of the GABELLA MACCHINE coil slitting line - material type: stainless steel, galvanised steel, aluminium, copper, etc. - sheet metal thickness (stainless steel): 0.2-1 mm - sheet metal thickness (aluminium): 0.2-3 mm - maximum cutting width: 530 mm - minimum cutting width: 10 mm - maximum coil weig ...

DEMAG ERGOTECH VIVA 800-400 injection moulding machine was built in 2001 in Germany by Demag Kunstofftechnik (currently Sumitomo (SHI) Demag Plastics Machinery GmbH). This highly efficient machine is used for the economic production of plastic parts of different colours, shapes and sizes. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, ensure high repeatability of the manufactured products. The DEMAG injection moulding machine weighs 3750 kg. Technical specifications of the DEMAG ERGOTECH VIVA 800-400 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum injection weight PS: 157  ...

DOOSAN DNM 4500 CNC machining center was built in 2022 (purchased as new in 2023) in South Korea by DN SOLUTIONS. The machine, designed for precision machining of workpieces with a maximum weight of 600 kg, is equipped with a number of reliable components that ensure uninterrupted operation for many years of intensive production. The machining processes, i.e. drilling, threading and milling, are performed inside a large work area by means of cutting tools and a powerful spindle with direct drive. All this is complemented by the intelligent SIEMENS CNC controller, in which advanced machining programmes are created in just a few steps. Throughout its entire service life, the machine has worked for just 83 hours. The DOOSAN milling center weighs 5000 kg. Technical specifications of the DOOSAN DNM 4500 CNC milling machine - CNC controller: SIEMENS SINUMERIK 828D - feed in the X/Y/Z axis ...

OTC Daihen IRB 651 robotic welding station was built by the Japanese brand DAIHEN Corporation. The system is configured for 3D welding of workpieces with complex shapes. The process is performed using the MIG/MAG method, which combines excellent precision with the highest quality welds. In order to increase production efficiency, the IRB-651 robot arm and wire feeder move on a traversable track, offering freedom of operation in all positions. All the components of the station are controlled from the control cabinet. Components of the OTC Daihen IRB 651 welding station - 7-axis welding robot: IRB-651 (2001) - welding positioner 2000 x 1000 mm with SEW-EURODRIVE motor (2 pcs.) - MIG/MAG welder: OTC Daihen CPDP350 - track: GERNERT - wire feeder - control cabinet: OTC Daihen L5561 (2000) - 3-phase isolating transformer: NORATEL 3LT20.0-400/200-23 (2004) - 3-phase transformer: OTC  ...

IRON SA 25000 ENC sheet metal decoiler was built in 2025 in Italy by Iron Srl. The machine, designed to automate production, has been equipped with state-of-the-art technology, which ensures the highest precision in decoiling coil strip. These include a worm gear reducer with overload clutch, an epicyclical reducer and four self-centring clamps with hydraulic expansion. The machine is controlled by a inverter and feedback encoder, which in turn enables controlled electrical braking. All this is complemented by a sturdy construction made of top-quality steel. The offered IRON 25 t sheet metal uncoiler is brand new and unused. The price also includes a CST coil lift table for easy loading of the coil directly onto the machine arm. The IRON SA 25000 ENC self-centring decoiler is part of the RNM coil strip handling line. The system is customisable and can be equipped with devices such  ...

MATEC 30 HV CNC machining center was built in 2001 in Germany by Matec Maschinenbau GmbH. The machine, designed for precision machining of oversized workpieces, is equipped with a number of reliable components with excellent specifications. This includes a tilting work head, a 24-position tool magazine and a chip extraction unit. All this is complemented by the intelligent BOSCH CNC control, in which advanced machining programmes are created in just a few steps. The MATEC CNC vertical machining center weighs approximately 15000 kg. Technical specifications of the MATEC 30 HV CNC milling machine - CNC controller: BOSCH TYP 3 OSA - feed in the X/Y/Z axis: 3000/600/800 mm - maximum spindle rotational speed: 9000 rpm - minimum spindle rotational speed: 20 rpm - spindle drive power: 16 kW - tilting work head - rotation angle of work head: ± 90° every 1° - 24-position tool magazi ...

WEMTECH Dynamic Torch 150/300 plasma cutting machine was built in 2022 in Poland by WEMTECH CNC. The machine, designed for precision machining of workpieces, is distinguished by the use of modern technical solutions that guarantee excellent production performance for many years of use. The machining process is performed on a table with a large cutting area which is filled with water or other coolant. The use of this solution eliminates the need to undertake any further secondary processes, such as grinding. The work table also has sectional exhaust extraction. The individual sections of the extraction table are controlled by pneumatic cylinders. The axes are driven by a stepper motor with a gear wheel mounted on a cushioned sled. This drive effectively eliminates backlash, as well as ensuring the achievement of high acceleration and working speed. The plasma torch, on the other hand,  ...

AVIA X-5 1250/630 CNC vertical machining center was built in 2015 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is used for, among others, precision milling, drilling and threading of workpieces with complex geometries in 5 axes. All these machining operations are performed by a high-speed electro-spindle located on a tilting working head. The tilting head, in turn, offers the possibility to use shorter tools and select the optimum cutting angle. The AVIA X-5 5-axis CNC machining center is offered with an extensive range of equipment, including a rotary table, measuring probes and a intelligent HEIDENHAIN CNC controller. The total weight of the machine is 10000 kg. Technical specifications of the AVIA X-5 1250/630 CNC milling machine - number of axes: 5 (X,Y,Z,B,C) - feed in the X/Y/Z axis: 1250/700/725 mm - B axis rotation range: -110°/+45° - C axis rota ...

AMADA EM2510NT punching machine was built in 2005 in France by AMADA EUROPE S.A.. The machine, designed for machining of thin metal sheets with a maximum thickness of 3.2 mm, is distinguished by its high reliability and precision. All machining processes are performed with a high press force of 20 tonnes, by means of tools located in a 45-station turret. A brush table with integrated balls prevents scratches and nicks on the surface of the sheet metal, as well as facilitating its positioning. The AMADA EM 2510 NT punching machine weighs 18000 kg. Technical specifications of the AMADA EM2510NT punching machine - maximum press force: 20 t (200 kN) - number of axes: 5 (X,Y,T,C,A) - feed in the X/Y axis: 2500/1270 mm - feed rate in the X/Y axis: 100/80 m/min - maximum workpiece thickness (plain steel): 3.2 mm - maximum workpiece dimensions (L x W): 5000 x 1270 mm - maximum workpiec ...

KEMPPI FastMig M 420 MIG/MMA welder was built in 2016 in Finland by Kemppi Oy. The machine, which is a configuration of high-quality components, is designed for both complex manual and mechanised MIG/MMA welding. With unlimited flexibility for specialised tasks and materials, the FastMig M420 welder is the best choice for businesses looking to increase productivity and welding quality. The KEMPPI semi-automatic welding machine consists of the following parts: – power source: KEMPPI FASTMIG M 420 – wire feeder: KEMPPI MXF 65 – feeding roller: DT400 – cooler: KEMPPI FAST COOL 10 – 4-wheel trolley: KEMPPI PM500 – connecting cable 10 m There are 2 units of these machines for sale. Price included in the advertisement is for 1 unit. Technical specifications of the KEMPPI FastMig M 420 welding machine - supply voltage: 400 V (-15% to +20%) - rated power (60%/100%):  ...

UF 150070301 MD PVD sputtering machine was built in 2015 in China by LONGKOU BITE VACCUM TECHNOLOGY CO., LTD. This extremely high-tech machine is used in the vacuum coating process. The technological vacuum combined with the high voltage inside a chamber causes the expulsion of metal atoms from the target (evaporation material), which are then deposited on the surface of the workpieces. Workpieces treated in this way are characterised by a ″metallic effect″ with high resistance to abrasion and chemical agents. The offered LKBT magnetron sputtering machine has the necessary equipment, i.e. a high-vacuum diffusion pump, compressor and RITTAL chiller. It is also possible to purchase new titanium targets (20 pcs.), chrome targets (4-5 pcs.) and TiAl alloy targets (3-6 pcs.) for an additional charge. The price for a single piece is 1200 PLN. Technical specifications of the UF 150070 ...

ALLCOMP UNICUT 3C5018 automatic cutting machine was built in 2017 (launched in 2018) by the Polish company Allcomp Polska Sp. z o.o. The machine, designed for the production of clothing and all sewing products, enables the machining of both single and multi-layered materials. The machining process is performed by a working head with a robust oscillating knife, which offers the highest cutting precision and shape repeatability regardless of the type of material. The innovative technical solutions used in the machine eliminate vibrations when working with the high oscillation speed of the knife (up to 6000 cycles per minute), making the process extremely stable. The working head can also be equipped with a drill with up to 4 drill bits. The UNICUT 3C50 automatic cutting machine also features, among others, a workpiece sorting system, a cutting layout editor and a barcode scanner. The total ...

NARGESA C3006 hydraulic guillotine shears were built in 2015 in Spain by PRADA NARGESA, S.L. The machine, which is designed for precision cutting of sheet metal with a maximum thickness of 6 mm, has quality knives with four cutting edges with increased service life. The beam is driven by a powerful hydraulic unit, which, like the electronic system, is made up of components from renowned brands. Easy operation of the machine, on the other hand, is ensured by a digital LCD display with an installed NC controller. The NARGESA guillotine shears weigh 8000 kg. Technical specifications of the NARGESA C3006 guillotine shears - maximum workpiece thickness (black steel 450 N/mm2): 6 mm - maximum workpiece thickness (stainless steel 700 N/mm2): 4 mm - maximum cutting length: 3030 mm - number of strokes: 12/min - cutting angle: 1,75° - maximum back stop distance: 700 mm - back stop posit ...

GRASO PK030 shrink wrapping machine with GRASO TGW 30/80 heat shrink tunnel was manufactured in Poland in 2014 by Graso. The device, due to its versatility and advanced technology, optimises the process of packaging various types of products in unit packs as well as collective packages. Packaging made of heat shrink film effectively protects products from external factors, while enhancing their aesthetic qualities at the same time. The GRASO PK 030 packing machine has a large working area and a knurled bar, which guarantees excellent sealing quality. After sealing, a roller conveyor transports the product to the heating tunnel, where the film shrinking process takes place. After exiting the heating chamber, the finished pack is cooled by fans. The GRASO TGW heat shrink tunnel, in turn, is equipped with a control box, heaters with heat sinks and adjustable airflow by means of adjustabl ...

CITIZEN CINCOM M32 CNC lathe was built in 2003 in Japan by CITIZEN WATCH CO., LTD. The machine, which is a combination of high performance and precision, enables to perform even the most complex machining of workpieces in 8 axes. All machining processes, i.e. precise drilling, threading and turning are performed inside a fully illuminated work area by means of cutting tools taken from 3 tool stations. The high thermal stability bed inside effectively reduces the influence of heat, increasing the service life of all components and tools. The CITIZEN CINCOM M-32 CNC lathe is offered with an extensive range of equipment, which includes, among others, two spindles (main spindle and sub-spindle) and an FMB bar feeder. All this is complemented by an intelligent CNC control, which allows, for example, self-diagnosis of the machine or program backup. The CITIZEN M32 swiss-type lathe weighs 32 ...

TRUMPF TruMatic 600L punch laser machine was built in 1998 in Germany by Trumpf GmbH + Co. The machine combines all the benefits of punching and laser machining to perform complex operations such as punching, chamfering and bending. Its versatility significantly reduces production time and costs, while maintaining high precision and productivity. The machining process is performed by a universal workhead with 20 tool stations and a 2.2 kW laser. A large brush table protects the surface of the sheet metal from scratches and nicks and also significantly reduces noise levels. The intuitive TRUMPF CNC control, on the other hand, allows the creation of even the most complex machining programmes in just a few steps. The TruMatic 600L punch laser combination machine weighs 23000 kg. The offered TRUMPF TC 600L punch-laser machine has worked in one shift so far and was mainly used for machi ...

STAR ECAS 32T CNC lathe was built in 2007 in Japan by STAR MICRONICS CO.,LTD. The machine, which combines high performance and precision, has been designed to improve the machining of even the most complex workpieces. Its extensive machining capabilities facilitate complex machining processes such as turning, drilling and threading, both on the front and back of the workpiece. This makes the STAR MICRONICS ECAS 32T CNC lathe indispensable in many industries, such as the automotive and aerospace. The STAR ECAS-32T swiss-type lathe is equipped with, among others, 11 axes, two spindles (main spindle and sub-spindle) and capacious turrets that can accommodate many tools for any type of machining. The maximally rigid design additionally ensures incredible process stability, which is essential to achieve excellent precision and quality of the produced parts. The total weight of the machine  ...

STAR ECAS 32T CNC lathe was built in 2005 in Japan by STAR MICRONICS CO., LTD. The machine, designed for the precise machining of complex workpieces, is used in many industries, such as automotive and aerospace. Its extensive machining capabilities facilitate complex machining processes, such as turning, drilling and threading, both on the front and back of the workpiece. Compared to other lathes available on the market, the offered STAR ECAS-32T swiss-type lathe stands out with the use of 11 axes, two 10-position turrets and two spindles (main spindle and sub-spindle). The extremely rigid design, in turn, provides the incredible process stability which is necessary to achieve excellent precision and quality of the produced parts. All this is complemented by intelligent CNC control, in which even the most advanced work programs are created in just a few steps. The STAR MICRONICS ECAS  ...

EHT TRUMPF TruBend 8230-40 CNC press brake was built in 2007 in Germany by EHT Werkzeugmaschinen GmbH (now Trumpf Werkzeugmaschinen Teningen GmbH). The machine, distinguished by its high productivity and excellent precision, is used for the economical machining of workpieces with a maximum length of 4050 mm. The rigid, internally stress-free design combined with a press force of 230 tonnes ensures excellent bending results, even during the most demanding challenges. The operator, in turn, has at his disposal a convenient foot switch and an intuitive CYBELEC CNC control, in which advanced machining programmes are created in just a few steps. The TRUMPF TruBend 8230 CNC hydraulic press brake weighs 18100 kg. Technical specifications of the EHT TRUMPF TruBend 8230-40 press brake - CNC controller: CYBELEC ModEva 10S - number of axes: 5 (X, X1, R, Z1, Z2) - maximum press force: 230 t (2 ...

JLG 3614 RS telehandler was manufactured in 2020 by the European division of the American brand JLG Industries, Inc. The 14-metre lifting height and high lifting capacity make it an indispensable vehicle on e.g. construction sites or farms. Its advanced manoeuvrability and adaptability to a variety of tasks significantly speeds up the performed work in all conditions, even on the most unfavourable terrain. To date, the machine has been in use for just 4066 hours and has a current UDT authorisation to operate until 31.05.2025. The JLG 3614RS telescopic handler weighs 9880 kg. Technical specifications of the JLG 3614 RS telehandler - maximum lift capacity: 3600 kg - maximum lift height: 14 m - capacity at maximum height (outriggers engaged): 3000 kg - capacity at maximum height (outriggers not engaged): 1500 kg - maximum forward reach: 9,5 m - capacity at maximum forward reach (ou ...