used 23 for sale

OMERA OPI 250 double column press was built in 2000 in Italy by OMERA S.r.l. The machine, designed for, among others, precision stamping, bending and punching, is the perfect solution for the mass production of parts from sheet metal and strips. All these machining operations are performed by a large-area slider operating at a force of 250 tonnes. The compact, rigid gantry design significantly reduces deflection under full load, as well as allows for operation with advanced punches and dies. The equipment also includes pressure cushions and SICK light curtains, which automatically switch off the machine’s power supply if the laser beam is interrupted. The OMERA OPI 250 NF/2 press weighs 24000 kg. Technical specifications of OMERA OPI 250 hydraulic press - maximum press force: 250 t (2500 kN) - maximum pressure cushion force: 100 t - minimum pressure cushion force: 10 t - work ta ...

AVIA VMC 1000 CNC machining center was built in 2017 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A.. The machine, distinguished by its extensive machining capabilities and state-of-the-art technical solutions, will meet any, even the most demanding challenges. Workpieces with a maximum weight of 1000 kg are machined by an extremely fast spindle with thermo-stabilisation, which, combined with precision cutting tools, guarantees excellent milling results. On the other hand, the machine’s high-quality construction with sliding doors offers maximum stability in machining by effectively eliminating any vibrations generated during milling. The AVIA CNC vertical machining center is offered with an extensive range of equipment, including toolholders, digital axis servo drives and the intuitive SIEMENS numerical control with ShopMill 3D overlay. The total weight of the machine is 5300 k ...

DECKEL MAHO DMU 60P CNC machining center was built in 1999 in Germany by DECKEL MAHO GmbH. The machine with its extremely sturdy construction was designed for the most intensive 5-axis workpiece machining. Inside the large working area, there is, among others, a 24-position tool magazine and an electro-spindle, which rotates at a maximum speed of 12000 rpm. All of this is complemented by an advanced HEIDENHAIN CNC control with an intuitive interface, where machining programmes are created in just a few steps. The DECKEL MAHO milling center has had only one owner to this date. Technical parameters of the DECKEL MAHO DMU 60P milling center - number of axes: 5 - feed in the X/Y/Z axis: 600/650/550 mm - maximum electro-spindle rotational speed: 12000 rpm - minimum electro-spindle rotational speed: 20 rpm - electro-spindle drive power: 15 kW - tool holder: SK-40 - operating hours: 7 ...

HAAS ST-30 CNC turning center was built in 2012 by the renowned American brand HAAS AUTOMATION INC. The machine, designed for precision machining of workpieces with a maximum diameter of 381 mm, is equipped with among others a 12-position turret, a reliable spindle and a 254 mm chuck. The compact design and the emphasis on high turning productivity and precision make the machine an excellent choice for any industrial facility. So far, the machine has mainly been used for machining aluminium castings and has been serviced on a regular basis. The HAAS CNC lathe weighs 4944 kg. Technical parameters of the HAAS ST-30 lathe - CNC controller: HAAS - maximum turning diameter: 381 mm - maximum turning length: 826 mm - maximum part deflection: 533 mm - maximum bar diameter: 76 mm - feed in the X/Z axis: 239/826 mm - rapid traverse in X,Z axis: 24 m/min - maximum spindle rotational spee ...

STILL EXV-SF 14 electric pallet stacker was built in 2023 by German company STILL GmbH. This extremely versatile vehicle allows you to control the flow of goods in your warehouse, from transporting loads in the goods receiving area to handling high-bay racks. The maximum load capacity of 1400 kg, combined with the intelligent speed reduction in corners, ensure maximum safety in transporting loads in even the most confined spaces. When the stand-on platform and side lateral protection arms are extended, the maximum speed without load can reach up to 10 km/h. The machine’s structure has been designed for maximum operator comfort. The pneumatically cushioned stand-on platform, which can be adjusted to the operator’s weight, protects the back from strain over long distances. Precise controls have been adapted to both right- and left-handed operators. On top of this, the operator has a ...

HYDRASAN 350 T hydraulic press was built in 2007. There are 2 such machines available for sale. Technical specifications of the HYDRASAN 350 T press - maximum press force: 350 t - lower work table surface area (L x W): 1300 x 420 mm - movable table stroke: 300 mm - distance between tables: 400 mm - approach speed: 4.8 mm/s - return speed: 5.1 mm/s - piston diameter (cylinder internal diameter): 230 mm - directional control valve: REXROTH 4WE 10 G33/CG24N9K4 - pump flow rate: 40 l/min - oil tank capacity: 120 l - hydraulic oil gauge: PAKKENS - working pressure: 230 bar - manostat: REXROTH HED 80A 20/350 - electric motor power: 5.5/11 kW - electric motor rotational speed: 1450 rpm - power supply: 380 V; 50 Hz - dimensions of the HYDRASAN machine (L x H): 1800 x 2200 mm

ULTRAPRAS WKR70H hydraulic press built in 2021 by the Polish company SAKOMET is designed for even the most demanding cold metal forming operations. The operations, such as precise cutting, stamping, punching and extruding of workpieces, are performed with a force of 16 tonnes using a hydraulic cylinder with a diameter of 100 mm. Induction limiters additionally allow adjustment of the piston advance and retraction limits, making the machine adaptable to the working range of various tools. In turn, centrally beneath the piston is a large cross-cut work table with a 90mm diameter bore. The UltraPras WKR 70H 16t hydraulic press weighs 420 kg. Technical specifications of the ULTRAPRAS WKR70H press - press force: 16 t - piston stroke: 70 mm - piston diameter: 100 mm - maximum working speed: 9.8 mm/s - minimum working speed: 2 mm/s - return speed: 20 mm/s - work table bore diameter: 9 ...

KT7 CNC KTP 300-150 plasma cutting machine was built in 2016 in Poland. The machine, designed for machining workpieces with a maximum thickness of 32 mm, has a stable waterbed table that ensures clean cutting, material cooling and reduces gas emissions during machining. Workpieces produced in this way stand out for their excellent precision and do not require other secondary processes to be undertaken. In addition, the machine’s compact design and all its components have been hot-dip galvanised and powder-coated to prevent rust and guarantee trouble-free operation throughout its lifetime. The equipment includes among others CAM software and a powerful plasma source HYPERTHERM. The KTP 300-150 plasma cutting machine weighs 800 kg. Technical specifications of the KT7 CNC KTP 300-150 plasma cutting machine - maximum sheet metal thickness: 32 mm - maximum sheet metal weight: 2000 kg  ...

AGIE AGIECUT CLASSIC 2S wire EDM machine built in 2004 in Switzerland is used for the production of, among others, precision dies, tools and punches. Workpieces with a maximum weight of 450 kg are machined using electrical erosion, which can achieve complex shapes in even the hardest materials. This process is performed in a dielectric-filled work tank using a wire with a maximum diameter of 0.33 mm, which is threaded through a special AGIEJET system. The workpieces machined in this way do not require any other secondary processes such as polishing to be undertaken. The AGIECUT CLASSIC V2 wire EDM machine also features an intuitive CNC control with many useful functions. It is possible to purchase the dedicated cooler shown in the photos at an additional cost – price negotiable. The AGIE EDM machine weighs 2580 kg. Technical specifications of the AGIE AGIECUT CLASSIC 2S EDM machi ...

BAYKAL HNC 4110 hydraulic guillotine shears built in 2019 in Turkey are designed for precision cutting of workpieces with a maximum thickness of 10 mm. The machining process is performed by extremely precise cutting knives with adjustable gap between blades. The all-steel construction combined with a powerful hydraulic system additionally ensure the highest stability and machining performance. The BAYKAL HNC 4110 guillotine shears have been in use for a small amount of time – so far they have worked only 560 hours. The total weight of the machine is 15400 kg. Technical specifications of the BAYKAL HNC 4110 guillotine shears - HMI panel: SIEMENS SIMATIC HMI - maximum sheet metal length: 4060 mm - maximum sheet metal thickness (Rm

STIGAL VXstandard plasma cutting machine, manufactured in 2010 in Poland, is used for precision cutting of workpieces with a maximum thickness of 57 mm. The open design with a very robust portal enables free sheet metal loading and guarantees exceptional stability during even the most demanding challenges. The entire workspace is covered by an extraction table with the ECTS system, which effectively levels the contamination generated during machining and ensures comfortable working conditions. All of this is complemented by an intuitive CNC control installed in the operator’s touchscreen control panel, allowing for machine control and control of all cutting process parameters. The STIGAL plasma cutting machine has also been retrofitted with an OB-R 400 rotator, which extends the machining range to tubes with diameters from 40 to 400 mm. Technical specifications of STIGAL VXstandard  ...

BATTENFELD TM 1300 injection moulding machine was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection moulding method, in which plasticised plastic is fed into a mould and then closed with high press force. In order to achieve parts with high repeatability and durability, the machine uses many reliable components with excellent parameters, including a high-precision mould clamping system operating at a force of up to 130 tonnes. All this is complemented by the intuitive UNILOG B4 CNC control with its many useful functions, which allows programming of the operating modes in just a few steps. The TM 1300 injection moulding machine weighs 7000 kg. Technical specifications of the BATTENFELD TM 1300 injection moulding machine - CNC controll ...

YCM FP100A CNC machining center was built in 2014 in Taiwan. Equipped with state-of-the-art technology and components from renowned brands, the machine is used for precision 3D machining of heavy workpieces weighing up to 1000 kg. During machining, the reliable spindle built in IDD (Isolated Direct Drive) technology moves on roller guides from Japanese company IKO, which minimises the effects of bending torque and also ensures high positioning accuracy. In addition, the use of precision ceramic bearings guarantees quiet operation and long life of the spindle. The FP100 A milling center is offered with a comprehensive range of equipment, including a 30-position magazine with automatic tool changing and an intuitive CNC control by HEIDENHAIN. The controller’s excellent optimisation and multitude of functions significantly simplify operation and enable advanced machining programmes to  ...

ATMSolutions ATMS 1325 CNC milling machine built in 2017 in Poland is designed for the production of both small and large parts made of e.g. aluminium, plastic or wood. Distinguished by its state-of-the-art solutions, the machine performs the machining process on a large vacuum table using a powerful, water-cooled spindle. The steel frame, by increasing the overall rigidity, makes it possible to achieve unprecedented precision and accuracy in machining, removing any vibration and deformation. In addition, the X and Y axes are equipped with trapezoidal guides with gear drives with bevel teeth, thanks to which excellent dynamics and feed repeatability are achieved. This is complemented by an intuitive CNC control with professional CAM software that supports G-CODE and .nc commands. The ATMS 1325 CNC milling machine weighs 1000 kg. Technical specifications of the ATMSolutions ATMS 1325 m ...

KT7 CNC KSP 150-300 SPEED plasma cutting machine was manufactured in 2019 in Poland. The machine, designed for precision machining of workpieces with a maximum weight of 4 tonnes, is an excellent choice for small businesses as well as for large industrial plants. Its compact design and all components have been fully galvanised to prevent rust and guarantee trouble-free operation throughout its lifetime. The SPEED KSP 150-300 plasma cutting machine is also equipped with, among others, a WALTER refrigeration dryer and many useful systems that increase precision and production efficiency. The total weight of the machine is 850 kg. Technical specifications of the KT7 CNC KSP 150-300 SPEED plasma cutting machine - work table dimensions (L x W): 3000 x 1500 mm - maximum sheet metal weight: 4000 kg - feed range in Z axis: 110 mm - travel speed: 25000 mm/min - working speed: up to 10000  ...

FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...

KRAUSS MAFFEI KM 300-1900 C1 injection moulding machine was built in 2007 in Germany by KraussMaffei Group GmbH. The machine, which is distinguished by its reliability and high performance, is used for the mass production of plastic parts of various colours, shapes and sizes. The parts are produced using the injection moulding method, in which the plasticised material is clamped with high press force. The process involves, among others, a high-precision mould clamping system operating at a force of up to 300 tonnes and a WITTMANN robot. The parts produced in this way are characterised by high repeatability, durability and precision. The KM 300-1900 C1 injection moulding machine weighs approximately 15 tonnes. Technical specifications of the KRAUSS MAFFEI KM 300-1900 C1 injection moulding machine - maximum clamping force: 300 t - screw diameter: 60 mm - maximum injection pressure: 2 ...

ECKERT SZAFIR BL2 plasma cutting machine was built in 2022 in Poland by Eckert AS Sp. z o.o. The machine, designed for precision cutting sheet metal made of structural steel, stainless steel and aluminium, is distinguished by its large 6 metre long and 2 metre wide sectional work table. The large area of the table makes it possible to efficiently machine a single oversized workpiece or multiple sheets at the same time, guaranteeing a high level of user comfort through the ongoing elimination of contamination. In addition, the portal structure based on a welded steel profile ensures excellent stability of the machine geometry, which does not become unstable under heavy loads. The SZAFIR BL2 plasma cutting machine has worked approximately 867 hours to date. Technical specifications of the ECKERT SZAFIR BL2 plasma cutting machine - CNC controller: ECS 872 - work table dimensions (L x W ...

KUKA KR 20 R1810-2 industrial robot was built in 2023 in Germany by KUKA AG. Purchased in December 2023, the machine is brand new, under manufacturer’s warranty and packed in the original boxes. The boxes have never been opened. This KUKA KR 20 R1810-2 6-axis robot, which is part of the KR CYBERTECH series, is used in the automation of processes such as workpiece machining, workpiece handling, assembly, palletising and welding. The machine is protected against uncontrolled electrostatic charging or discharging, making it also suitable for the safe handling of sensitive electronic components. Its slim design with an extremely robust arm with an increased range of movement ensures freedom of operation in all positions, even in hard-to-reach areas. Optimised controller structures offer smooth and precise travel, both on the track and during positioning. In addition, each of the 6 axes  ...

XYZ SMX 5000 CNC bed milling machine was built in 2016 in the UK. The machine for precision machining of workpieces with a maximum weight of 850 kg is made from a uniform cast iron, which guarantees excellent rigidity and stability during even the most intensive machining. The enclosed workspace includes a large work table with a length of 1930 mm and a width of 355 mm, a reliable spindle and a tilting work head. All this is complemented by a CNC control with integrated CAD functions, which significantly simplifies everyday machining. The XYZ Machine Tools SMX 5000 CNC milling machine weighs 3570 kg. Technical specifications of the XYZ SMX 5000 milling machine - feed in the X/Y/Z axis: 1500/600/580 mm - rapid traverse in X,Y,Z axis (CNC): 6.3 m/min - rapid traverse in X,Y,Z axis: 3.8 m/min - work table dimensions (L x W): 1930 x 355 mm - maximum workpiece weight: 850 kg - number ...

AGICOM recycling machine trade: The RC 1500 cable peeling machine is a used device, built in 2015. The device is in top condition and ready for immediate use! Peel range: 1.0-70mm cable Replacement and wear parts are available at any time if required in the future. Drive 230V 0.75 kW; Weight: 43 kg Desktop cable peeler with integrated guide roller

AGICOM Recycling Machine Trade: Cable Peeling Machine, Desktop Cable Peeler RC1500 Cable diameter: 1 - 60 mm Cutting speed: 9 - 18 meters/min Working voltage: 230V Drive power: 0.75 kW Total weight: approx. 48 kg Dimensions: 422 x 380 x 400 mm Year of Make: 2015

AGICOM recycling machine trade: Small alligator shears JMC 150 overhauled by the manufacturer, benchtop device, ready for immediate use! Manufacturer: Mc Intyre Knife length: 150 mm Knife opening: 105 mm Cutting capacity: 25 tons Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal

AXA Portale VPC-55 in good condition Heidenhain iTNC-530 Vertical 3-axis gantry center Year of manufacture 2007 X-axis 2360mm Y-axis 1400mm Z-axis 900mm Table clamping area approx. 2700 x 1100mm, load up to approx. 3000kg Pendulum operation possible 7pcs T-Tension Grooves 14H9 Mass approx. 25t. Oil drip pan Heidenhain Handwheel HR 410 Dqrrlx Measuring system Heidenhain direct M&H 3D Pushbutton Machine protection system from Brankamp Spindle design SK50 DIN 69871A 56kW drive with up to 6000 1/min IKZ 20bar + belt filter system in tub Spindle hours approx. 33156 Tool Changer 30x Hinged belt chip conveyor right side Chip Spray Gun

Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial no.023 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled

Control Fanuc OiTD Centre Distance 2,200 mm Max. swing over bed 970 mm Max. Swing over Cross Slide 720 mm Max. Turning diameter 850 mm Spindle Bore Ø 230 mm R.P.M. 500 kW 37 Volts 400 Cycles 50 Including: 4-Jaw chuck, Ø 800 mm rear Pneumatic 3-Jaw chuck, Ø 600 mm front

Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,600 mm Vertical Travel headstock (Y) 1,250 mm Longitudinal travel (Z) 1,500 mm Table 1,250 x 1,400 mm Table load 5 ton R.P.M. 4 – 1,250 (18x) kW 23 Volts 380 Cycles 50

Planer Weinig Type Powermat 2400 Very well preserved Weinig planer. Shafts U/RE/LI/O/U. U=22KW, RE=21 KW, LI=21 KW, O=30KW, U=22 KW, O=30 KW, U=22 KW Feed rate 8 – 100 rpm, 30 KW. Planing width: 20 mm – 230 mm, height 10 mm – 160 mm- Year of manufacture: 2016, with complete control and control panel. Noise hood. Errors, changes and prior sale reserved.

Inv. Num. : 8418 Type: TrumaBend V 85 S Producer: TRUMPF Created: 2001 Parameters: Hours: 70444 h Compressive force: 85 t Maximum bending length: 2050 mm Stroke: 215 mm Machine height: 2375 mm Machine length: 3190 mm Machine width: 2100 mm Machine weight: 8750 kg

Inv. Num. : 3621 Type: CD 402 Producer: DMT-KERN Created: 2003 Parameters: Control system: HEIDENHAIN Manualplus 4110 Operating hours: 35000 h Maximum turning length: 800 mm Maximum turning diameter over bed: 400 mm Maximum turning diameter over support: 230 mm Maximum spindle speed: 3000 1/min Spindle bore: 64 mm Equipment: Chuck Tailstock Lunette Multifix B Tool Holder 2 pieces of driven tools (radial and axial) Automatic eight-position turret on a cross slide at the rear

Inv. Num. : 8437 Type: 50-VE Producer: IMS Created: 2002 Parameters: Compressive force: 50 t Maximum stroke rate per minute: 145 1/min Stroke: 80 mm Adjusting the ram: 75 mm Machine weight: 2300 kg

Inv. Num. : 7934 Type: Chevalier FCL-2140 Producer: Falcon Created: 2005 Parameters: Control system: FAGOR CNC 8055 T Max. turning length: 850 mm Max. turning diameter: 540 mm Spindle speeds: 2000 1/min Spindle bore: 85 mm Length: 2840 mm Width: 1905 mm Height: 2235 mm Weight: 2900 kg Equipment: Technical documentation Collets Lunette Safety pins for quick change

Inv. Num. : 7836 Type: A26 Speedy Producer: IEMCA Created: 2016 Parameters: Side length: 3000 mm Length: 2370 mm Width: 1105 mm Height: 1890 mm Weight: 1850 kg Equipment: Automatic feeder SMART 320

Inv. Num. : 8010 Type: SKJ 20 A CNC Producer: TOS Created: 1972, GO 2006 Parameters: Table diameter: 2000 mm Clamp speed: 200 1/min Max. turning diameter: 2300 mm Slide stroke: 1000 mm Max. workpiece diameter: 2300 mm Max. workpiece height: 1500 mm Max. workpiece weight: 15000 kg Length: 5800 mm Width: 3500 mm Height: 5100 mm Weight: 42000 kg

Inv. Num. : 7723 Type: ZRM9 Producer: Ernst Grob Generated: Parameters: The machine is used to produce involute grooves by extrusion. Accessories: Several grave goods Universal Gear wheels

Inv. Num. : 8302 Type: DT-1 Producer: HAAS Created: 2010 Parameters: Control system: HAAS Work table length: 660 mm Work table width: 381 mm Milling spindle speed: 10000 1/min Maximum table load (even): 226.8 kg Spindle drive power: 11.2 kW X-axis travel: 508 mm Y-axis travel: 406 mm Z-axis travel: 394 mm Threading speed: 5000 1/min Machine weight: 2336 kg Equipment: Renishaw tool probe Renishaw Workpiece Probe Clamping kit (30 ks) Weldons Drill head

Inv. Num. : 8333 Type: TrumaBend V85 S Producer: Trumpf Generated: Parameters: Compressive force: 85 t Maximum bending length: 2050 mm Distance between frame walls: 1750 mm Machine height: 2375 mm Machine length: 3190 mm Machine width: 2100 mm Machine weight: 8750 kg

Inv. Num. : 8332 Type: TrumaBend V50 Producer: Trumpf Generated: Parameters: Compressive force: 85 t Maximum bending length: 1275 mm Distance between frame walls: 1040 mm Machine height: 2375 mm Machine length: 1930 mm Machine width: 2030 mm Machine weight: 4750 kg

Inv. Num. : 8328 Type: KMX 732 evo Producer: MANURHIN Created: 2013 Parameters: Control system: FANUC Operating hours: 20723 h Max. rod diameter: 32 mm Number of Spindles: 7 plus 2 pieces Maximum spindle speed: 10000 1/min Spindle bore: 37 mm Spindle stroke: 410 mm Weight: 4500 kg Equipment: Collets Bar Feeder Ducts (21 and 13 mm) Telescopic reduction inserts (inner diameter 21 and 13 mm)

Inv. Num. : 8284 Type: CS 105 Producer: MECOF Created: 2003, GO 2023 Parameters: Work table length: 6020 mm Work table width: 1060 mm Milling spindle speed: 5-2000 1/min Maximum table load (uniform): 8000 kg X-axis travel: 8300/9300/10300 mm Y-axis travel: 760 mm Travel Z axis: 1200/1700 mm Machine weight: 36000 kg Equipment: Straight extension milling head Universal milling head AC1 Additional table (2 pieces) Additional bracket (2 pieces) GO 2023: Extension head Compensating cylinder leak Transfer 2018: Modification of the steering and drive motor

Inv. Num. : 8314 Type: 42 BNA DHY Producer: Miyano Created: 2011 Parameters: Max. turning length: 235 mm Max. turning diameter: 80 mm Maximum spindle speed: 6000 1/min Max. rod diameter: 42 mm Weight: 3900 kg Equipment: IEMCA Bar Feeder

Inv. Num. : 8345 Type: MT 50 CNC Producer: KOVOSVIT Created: 2002 Parameters: Control system: HEIDENHAIN Max. turning length: 1500 mm Maximum turning diameter over bed: 500 mm Maximum workpiece weight: 300 kg Weight: 2300 kg

Inv. Num. : 8318 Type: LZ-02RY Producer: Miyano Created: 2009 Parameters: Control system: FANUC Maximum turning length: 81.3 mm Max. turning diameter: 99.1 mm Maximum length of travel in the X-axis: 300 mm Maximum feed rate in the Z-axis: 240 mm Maximum spindle speed: 4000 1/min Length: 2600 mm Width: 2300 mm Height: 2400 mm Weight: 3900 kg Equipment: Spares Kitagawa BB210 Chuck 6 and 8

Inv. Num. : 8317 Type: GCL-2 Producer: Goodway Created: 2001 Parameters: Control system: FANUC Maximum turning diameter: 230 mm Maximum length of travel in the X-axis: 125 mm Max. rod diameter: 51 mm Spindle speed: 4500 1/min Equipment: Swivel chuck

Inv. Num. : 8299 Type: ST 30 Producer: HAAS Created: 2020 Parameters: Control system: HAAS Switch-on hours: 21574 h Hours: 12658 h Grinding diameter: 533 mm Max. turning diameter: 381 mm Maximum spindle speed: 3400 1/min Maximum main spindle power: 22.4 kW Spindle Diameter: 88.9 mm Max. rod diameter: 76 mm Lathe chuck diameter: 254 mm Axis X: 239 mm Axle Z: 826 mm

Inv. Num. : 8204 Type: SK 12 Producer: TOS Created: 1953 Parameters: Max. turning diameter: 1350 mm Clamp plate diameter: 1180 mm Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

Inv. Num. : 8223 Type: HPDB 400 Producer: Hydrap Created: 1989 Parameters: Compressive force: 400 t Total power requirement: 11 kW Ram stroke: 300 mm Machine weight: 32000 kg Equipment: Adjustable lower table

Inv. Num. : 8239 Type: WHN 13 CNC Producer: TOS Created: GO 2004 Parameters: Control system: MEFI X-axis travel: 3500 mm Y-axis travel: 2000 mm Travel distances Z-axis: 1200 mm

Inv. Num. : 8235 Type: VH 50 D Producer: Saturn Generated: Parameters: Description: Drill with turntable. On the table, the product is measured manually with clocks (whether it is perfectly balanced or whether some adjustment is required to balance by drilling holes).

Inv. Num. : 8232 Type: Twin 42 Producer: Gildemeister Created: 2002 Parameters: Control system: Siemens Sinumerik Switch-on hours: 80654 h Hours: 33758 h Maximum turning length: 650 mm Maximum turning diameter over bed: 250 mm Maximum turning diameter over support: 120 mm Maximum length of travel in the X-axis: 300 mm Max. travel length of the Z-axis: 650 mm Maximum spindle speed: 7000 1/min Length: 4770 mm Width: 2220 mm Height: 1950 mm Weight: 5500 kg Equipment: Powered tools Bar Feeder