36 ABA used machine for sale

Surface Grinding Machine ABA FFV 1000/50 Travel X: 1000 mm Travel Y: 500 mm Travel Z: 400 mm Magnetic chuck dimensions: 1000 x 400 mm Auto stepover X / Y / Z Separate electrical panel Separate lubricant tank Separate hydraulic group Voltage: 380 V Length: 4000 mm Depth: 1700 mm Total height: 2300 mm Weight: approx 6 T

Key data: 1000 mm, 600 mm

Specifications: Grinding area 1,000 x 600 mm Grinding wheel size Ø400 x 60 x 127 mm Magnetic clamping plate (LxW) 1,000 x 500 mm Equipment/accessories: Coolant management coolant system with paper belt filter Dressing system NC-controlled Setup operation Electronic handwheel

Z-axis controller motor and throttle aba FFU

Stepper motor and control chart V-axis

Control Components Abamatics 2

Y axis including controller

Electrical Parts W-Axis Regulator Abamatik 1

Electrical Parts Control Abamatik1

Rapid traverse and stepper motor with Y-axis control map

Keypad

Control (used)

Control panel (used)

Stepper Motor Components

Key data: 625 mm, 280 mm

Key data: Machine type: FF 625 Machine No.: 4499 Year of manufacture: 12.1966 Surface Grinding Machine Grinding area: 625 x 280 x 375 mm Grinding spindle motor: 3.81 KW Magnet size: 600 x 200 mm

Surface grinding machine Make: ABA Type: FFU 1250 / 50 Year of construction: 1970 Magnet: 1250 x 400 mm Sanding area: approx. 1250 x 400 mm Machine dimensions: L: approx. 3700 mm, W: approx. 1600 mm, H: approx. 2500 mm Machine weight: approx. 4500 kg

aba FF 625 Surface grinding machine ABA Precision Surface Grinding Machine FF600/25 Grinding length 600mm Scrap width 250mm Electric Magnet 600x250mm Workpiece height 400mm Diamond puller Height adjustment digital Motor 3,27 KW 400 V 50 HZ Coolant device Grinding wheels and flanges Weight: approx. 1350 kg G&-5020-M1768

Code 61063 Description Surface grinding machine Make ABA Model FFU 2000/60 Serial No. 208 125 Control Abamatic 3 Year 1986 Tablesize 2510 x 500 mm Grinding surface L x B x H 2000 x 600 x 700 mm Magnetical plate size L x B 2000 x 500 mm Speed table movement 3 – 30 m/min. Max. distance table – centre grinding wheel 900 mm Grinding stone dim. Stone x Wide x Taper Ø 400 x 50 x Ø 127 mm Spindel power 26 kW Spindel speed 1600 - 3000 rpm Motor power 26 kW – 380 Volt Total electr.com. 34 kW Total space L x W x H 7000 x 3500 x 2650 mm Weight 10500 kgs Accessoiries Elec. Magneticplate 2000 x 500 mm Coolant with paperfilter Digital readout Grinding stones, etc. Condition Machine is in good condition

Used Electromagnetic clamping plate , from ABA grinding machine Technical data: Length: 600 mm Width: 300 mm

Gr. Grinding length: 620 mm gr. Grinding width: 250 mm table size: 200 x 620 mm grinding wheel dimensions: 200 x 220 x 51 mm Electr. Supply: 380 V, 1/1.8 kW space: 1650 x 1450 x 1800 mm weight: 1350 kg

This 3-axis ABA EL 1006 surface grinding machine was manufactured in 1998. It features a sanding area of 1000x600 mm, a table load capacity of 1000 kg, and a grinding wheel diameter of 400 mm. The machine underwent a general overhaul in 2017, including a new spindle and X guides. If you are looking to get high-quality grinding capabilities, consider the ABA EL 1006 machine we have for sale. Contact us for more information.

Sanding length/width: 450mm/300mm, workpiece height: 350mm, max. sanding wheel width: 50mm, weight: approx. 1500kg.

grinding length:600 mm grinding width:300 mm total power requirement:7,5 kW number of spindle speeds:0-3000 grinding wheel motor:7,5 kW grinding wheel diameter:300 mm dimensions of grinding wheel:76 x 20 mm ABA magnetic table flat grinding machine

grinding diameter:360 mm grinding length:950 mm clamping length:1.000 mm total power requirement:20 kW weight of the machine ca.:4.800 kg 100 % before loading warranty: none In metric standard version for electric connection to 380 V, 50 cycles, 3 periods.

grinding length: 1000 mm grinding width: 500 mm workpiece height: 630 mm table-size: 1000x400 mm grinding wheel diameter: 400 mm weight of the machine ca.: 5.8 t Magnetic plate 1000x500mm www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel dresser, swivel with angle adjustmentDressing diamond for surface grinding machineDiamond dressing device for grinding wheelsManufacturer: ABA Werke AschaffenburgWorking stroke: 28 mmDiamond receiving hole: 8 mmAngular rotation on the base plate: +/- 90Base plate: 145 x 145 mmTip height: 115 mm- Reducing sleeve in the receiving hole 6 mm to 8 mm- without dressing diamondOverall height: 140 mmWeight: 9.6 kgvery good condition; used

Franzenschneidemaschine - Fray DIE Cutter ABA G100 Year ca. 1972 - Serial-No. 5515329002 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

grinding length: 600 mm grinding width: 400 mm workpiece height: mm total power requirement: 11 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel dresser, swivel with angle adjustment Dressing diamond for surface grinding machine Diamond dressing device for grinding wheels Manufacturer: ABA Werke Aschaffenburg Working stroke: 28 mm Diamond pick-up hole: 8 mm Angular rotation on the base plate: +/- 90 Base plate: 145 x 145 mm Center height: 115 mm - Reducing sleeve in the receiving hole 6 mm to 8 mm - without dressing diamond Height: 140 mm Weight: 9.6 kg very good condition; used

Franzenschneidemaschine - Fray DIE Cutter ABA G100 Year ca. 1972 - Serial-No. 5515329002 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

BU62-60-30-B-003 built-in rectifier device BUS21-30/60-30-001