FLATBED UV LARGE FORMAT PRINTER M. No.: 2525797057901 • CMYK + Lc Lm + 2 x White • White in the pre- and postprint • Speeds up to 45 m²/hr. (500 ft²/hr) • Max. print size 2,54 x 1,54 m • Substrates up to 4,5 cm (1.77 in) thick. • Multiple board printing • Borderless printing • Shuttle safety sensors • For Digital Printers, Poster printers and Mid-Size Graphic Screen Printers
LARGE FORMAT PRINTER AGFA JETI 3324 SL BASE SOLVENT RTR (roll to roll) 6C (PRINTS ON TARP, CLOTH BANNER & VARIOUS MATERIALS) M. No.: 3.324287 • Large format printer with solvent ink • Solvent based ink: 6 colors (4CMYK+2CM light) • Printing width: 3.2 M (3200 mm) • 24 high-performance Spectra piezoelectric printheads • 600 dpi (2-sided printing) • Max. roll weight up to 230 KG • Up to 64 m2 / h • Jeti software RIP (E9YC4000) Equipment / additional information: • Carrier rewind unit: Jeti 3M Solvent (E9WF2000) • Retro Heater Unit (E9ZZL000) • Jeti Spectra head 24 SL PH 3324 (E91UE000) • Vinyl Loader (E9WKB000) • Vinyl Roller Assy (E9ZUA000) • Spare parts kit for Jeti 3324 (E9V4C000) • Backlit camera (E9Z2P) • Complete set of new filters (12 pieces) • 10 meters of new hoses also included • Three sets of new connectors • Original ...
Agfa Azura C 95 washout; cleaned and tested; Working width 200-950mm; Printing plate length 310-1100mm; Printing plate thickness 0.15-0.30mm; Double brush; suitable for chemical-free printing plates. Clean out unit Agfa Azura C 95; cleaned and checked; working width 200-950mm; plate lenght 310-1100mm; plate thikness 0.15-0.30mm; double brush; used for chemistry free plates.
Single Autoloader Agfa Acento L-50; was installed on Agfa Acento S; Condition as is, unchecked. Single Autoloader Agfa Acento L-50; used for Agfa Acento S; condition as is, not checked.
up to max. panel format 2,100 x 1,600 mm, min. plate format 650 x 550 mm, in Dual Plate mode 2 plates simultaneously up to max. plate format 1,060 x 1,600 mm, incl. Avalon N40 Skid Loader and N40 Multi-Cassette Loader, Thermal Laser 830nm 512 Laser Channels, Resolution 2,400 dpi, internal register punch, with Ethernet to PIF Box Interface, Windows Server with Apogee PlateMaker, optionally with online development line, burning-in-oven, NELA line, very good condition, maintenance contract maintained, Immediately available, price from location on request
AGFA Acento II S CTP system Age: 2006 Max. Plate Format: 830 x 660 mm Max. Imaging Area: 830 x 633 mm Running Time: 33.575 hours only Exposure Time: 4974 hours Plate winding cycles: 98,296 Plate Type: Thermal printing plates 32 Infrared Laser Diodes Performance: 21 plates/hour Resolution: 1200 – 2400 dpi Internal Bacher Punching for Format 52 x 74 cm Consists of: AGFA Acento II S (PT-R4300S) AGFA Azura C95, Age 2012 Clean out station Advand PST 26 Plate Stacker Computer with Dongle Torrent Software RIP
All Rip and Software Included, 2400 dpi, Formats: Min. 324x660mm, Max. 370x830mm, PST 26 Compact Stacking Delivery, 16 Diods Laserhead, Infrarot 830nm thermal, chemical free thermal CTP with Autofeeding
AGFA Imaging Plate System / CR System CR 30-X (for Veterinarian) Primary processing station 3 CR cassettes • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the AS condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as Used, EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or system components must be carried out by the manufacturer or by a specialist or technician authorized by th ...
used
used
with skid (pallet) auto-loader for pallet processing incl. two bases for picking up the pallets, maximum panel format 1,750 x 1,400 mm, minimum panel format 650 x 550 mm, Resolution 2,400 dpi, Inline punching system, Optionally, an Arkana 150 development machine (built in 2020) and Parts of a Nela SF-Bender panel automation system (built in 2020), transport and installation worldwide, Price on request
FLATBED UV LARGE FORMAT PRINTER AGFA ANAPURNA M2540 FB M. No.: 2525797057901 • CMYK + Lc Lm + 2 x White • White in the pre- and postprint • Speeds up to 45 m²/hr. (500 ft²/hr) • Max. print size 2,54 x 1,54 m • Substrates up to 4,5 cm (1.77 in) thick. • Multiple board printing • Borderless printing • Shuttle safety sensors • For Digital Printers, Poster printers and Mid-Size Graphic Screen Printers
4 up thermal CTP AGFA Avalon N4 year 2010 with AGFA Apogee RIP with Cleanout unit 46.000 plates produced
4 up thermal CTP AGFA Avalon N4 year 2010 with AGFA Apogee RIP with Cleanout unit 46.000 plates produced
LARGE FORMAT PRINTER AGFA JETI 3324 SL BASE SOLVENT RTR (roll to roll) 6C (PRINTS ON TARP, CLOTH BANNER & VARIOUS MATERIALS) M. No.: 3.324287 • Large format printer with solvent ink • Solvent based ink: 6 colors (4CMYK+2CM light) • Printing width: 3.2 M (3200 mm) • 24 high-performance Spectra piezoelectric printheads • 600 dpi (2-sided printing) • Max. roll weight up to 230 KG • Up to 64 m2 / h • Jeti software RIP (E9YC4000) Equipment / additional information: • Carrier rewind unit: Jeti 3M Solvent (E9WF2000) • Retro Heater Unit (E9ZZL000) • Jeti Spectra head 24 SL PH 3324 (E91UE000) • Vinyl Loader (E9WKB000) • Vinyl Roller Assy (E9ZUA000) • Spare parts kit for Jeti 3324 (E9V4C000) • Backlit camera (E9Z2P) • Complete set of new filters (12 pieces) • 10 meters of new hoses also included • Three sets of new connectors • Original ...
washout Agfa Azura C 95; good condition; cleaned and tested; new infeed and medium rollers incl. Bearing; suitable for chemical-free negative plate Agfa Azura; Infeed width 200-950mm; Min. Panel length 310mm; Panel thickness 0.15-0.30mm; Inlet and outlet table. Cleaning unit Agfa Azura C 95; good condition; cleaned and checked; new infeed and middle rollers incl.bearings; used for chemfree negativ plate Agfa Azura; Einfeed width 200-950mm; Min. plate lenght 310mm; plate thikness 0,15-0,30mm; infeed aand outfeed table.
AGFA Storage Film System (CR) CR 85-X (mammogenic) with: First Processing Station 6 AGFA CR MM 3.0 Mammo cassettes: 18x24 - 2 pcs./ 24x30 - 4 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in ACTUAL condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as used, EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
AGFA Soeicherfoliensystem (CR System) ADC Solo MUSICA Computer TFT LCD Monitor Model No. B18XA_Bj. 2001 • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in ACTUAL condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as used, EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
8 up Thermal CTP Avalon N16–50 XT med MAL 3 kas. Punch system Bacher 780 Avalon N16, Jan 2010 MAL, Apr 2010 Elantrix 125, march 2009 Life time plates 278218 p Lifetime running 105212 h Actual running time 11096 h Exposure time 4647 h LD Status Reserve (U) 83 Current (U) 23 Reserve (L) 26 Current (L) 23 LD (U) replaced 25, march 2022 Under AGFA Service since installation Price: on request
4 up thermal CTP AGFA Avalon N4 year 2014 32 diodes with AGFA Apogee RIP Price on request
4 up Thermal Agfa Acento E Year 2005 With Harlequin Rip Price: on request
Thermal CTP Agfa Xcalibur E Year: 2004 in production with Transporttable Transfer table Processor Agfa Elantrix Workflow Apogee V.7.1 Price: on request
used
Thermal CTP AGFA Avalon LF S year 2006 with AGFA Prepress Workflow Price: on request
450 x NEW PRINTING PLATES ALUVA N 15 NEGATIVE PLATE (510 x 400 mm)
Thermal CTP AGFA Avalon LF year 2007 73,000 sqm produced with AGFA Apogee Prepress Manager Price: on request
used
4 up thermal CTP Manufacturer: Agfa Model: Acento-S Built 2006 size 660 x 830 mm Min. size 324 x 370 mm Autoloader Inline punch Stacker Chemical free Include Rip (Apogee 8) + Software Price: on request
used
4 up Thermal CTP Agfa CTP (Thermal) Model: Acento-S Built: 2006 size 660 x 830 mm Min. size 324 x 370 mm Autoloader Inline punch Stacker Chemical free Include Rip (Apogee 8) + Software Price: on request
VLF Thermal CTP AGFA Avalon VLF Model: AGFA Avalon 50 XT size: 120 x 160 cm year: 2006 with AGFA Platemanager with AGFA Cleanout unit with Tiff shooter Price: on request
AGFA CR System CR 85-X: First Processing Station (Workstation) AGFA CR MD4.0 General cassettes and ADCC HR Kassetten_ different sizes 18x24, 24x30, 35x43 (11 pieces)
