APV Screw Compressor 3 Screw compressors Control Panel, Fridge watch 2100 system DX system Last run on 404a Last used to run a Spiral Freezer 33 Kw each, Total = 99Kw Max Model: HS2116 Built 1994 Complete with Searle Condensor (4 fan) Model: MDR 110-12 Serial: 961246 Physical dims: 5.1m x 1.16m x 0.7m (h)
Plate apparatus Manufacturer : APV Type: K 55 Capacity: 8,000 litres/hour Technical specifications : 6 Departments 1x steam, 1x hot water, 2x product vs. product, 1x cold water, 1x ice water Capacity 8,000 litres/hour Clip seals 423 plates total Material Plates AISI 316 (V4A), thickness 0.8 mm 1 box with replacement seals is still included. good condition
This flash pasteurizer was manufactured by APV in year 2005 for eliminating harmful microorganisms from beer before packaging. Pasteurizer is completely built on one stainless steel frame and all equipment and instruments are wired. All product touching parts are polished food quality stainless steel (AISI 316) or special plastic suitable for food processes. The machine has CIP connection for proper cleaning. Product is heated in and cooled after pasteurization in a 3-stage plate heat exchanger (heating, cooling and heat recovery) using low pressure steam for heating and cold water / glycol solution for cooling. Pasteurization takes place in tubular stainless steel holding tube following the heat exchanger. The machine contains a heat exchanger, holding / pasteurization tube, control cabinet, pumps, pipes, valves and instruments all built on stainless steel frame. Technical Characteri ...
HOMOGENISER Manufacture : APV MANTON GAULIN Model : K3 Capacity : 1200 L/h Bar : 200 bar Stages : 2 Manual Book : Included
APV/ N35-RUS-10/ 8-10m3/h/1999 Flash pasteurizer for juices for example with pipe hot holder, tank, pumps etc. and control mounted on frame used, sold as it is, where it is, price ex location
APV/ N35-RUS-10/ 8-10m3/h/1999 Flash pasteurizer for juices, e.g. with tube hot holder, tank, pumps, etc. and control mounted on rack used, sale in current condition, price ex location
APV/ N35-RUS-10/ 8-10m3/h /1999 Flash pasteurizer for juices for example with pipe hot holder, tank, pumps etc. and control mounted on frame used, sold as it is, where it is, price ex location
Used APV ultrafiltration plant. New 1994. Nominal capacity of 20 000 kg/h. Information on the membranes that were last used in UF3. T-CUT Core UF 200-125 075-3658 x 80 pcs. Tubular core for ultrafiltration Membrane - Material: PES - MWCO: 200 kDa - Tube diameter: 12.3 mm (inside) - Membrane area: 2,7 m² Module - Length: 3,658 mm - Diameter: 75 mm - Head material: Polysulfone -Electrical connection power: 120kW
APV Gaulin 5-8 B homogeniser Serial: 97L35085 Stainless, 5.5Kw motor, output of 230 l/h, working pressure 550Bar
Manufacturer: APV - Schröder Type: MC18 3TPS Capacity: 4200 l/h Pressure: 200 bar Stages: 2 Condition: very good
Used ultrafiltration station made by APV PCI A19 membrane type. New 1996. Previously worked on juice. Capacity 10000 liters/h. Temperature 50 C. Pressure 5,5 Bar. 24 KW motor. 19 membrans dia. 12,5mm
Used APV three-stage evaporation station. The station is equipped with an aroma trap. Max. capacity 12000 L / h of evaporation on the juice.
Rotary lobe pump Manufacturer : APV Type: BW 2/013/10 Serial number 10002985 or No. 2715204 Head 10 bar Power: 1.5 kW Speed 1,395 rpm, gearbox 284 rpm Inlet DN 80 Outlet DN 80 Temperature max. 110°C
Used pasteuriser by APV model N35. New 2004. Capacity 10000 l/h. Heat exchange surface 56.35 m². Operating pressure 10 bar. Operating temperature max/min °C 100/0.
Used pasteuriser by APV model N35. New 2005. Capacity 10246 kg/h. Heat exchange surface 54.6 m². Operating pressure 10 bar. Operating temperature max/min °C 100/0.9.
1x pasteurizer / KZE system, vinegar pasteurizer, for 5,000 to 7,000 ltr./h, with automatic control, CIP cleaning, see pictures for further details
used
WE HAVE A NUMBER OF SPARE PARTS AND TOOL BOX FOR MC 18 AND MC 30 GAULING HOMOGENISERS
A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water precoth 3 bar or slightly higher Residual -0.2 less than 0.1 ppm for a water temperature of 12°C with 1 APV centrifugal pump with 15 KW with 1 vacuum pump, manufacturer Travini Italy, 11 KW with CO2 dosing via needle valve with level control of the entry and exit Water 1 control cabinet on 2 feet standing with Siemens switchgear equipment Dimensions of the system: 2,900 x 1600 x 3200 mm Weight of the plant 950 kg A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water pre-pressure 3 bar or slightly higher residue -0.2 less than 0. ...
UHT Pilot Plant / Tube Heater Power: approx. 100 ltr./h - Tube heater - 2 process tanks of approx. 70 litres each - High pressure homogenizer APV LAB 100 - PWA cooler
Double-walled stainless steel tank with agitator 1500 Liter YOM 1991
Centrifugal pump Type: W40/20-220N Manufacturer: APV, Germany Power: 20,000 l/h Speed: 2,900 rpm. Pressure: up to 3.0 bar Connections: Inlet NW 50 / Drain NW 65 Design: Stainless steel Media: Beer, AfG, Milk, Lye etc. Connection values: 380 V, 50 Hz; 3.0 KW Weight: approx. 60 kg Dimensions: 65 x 30 x 35 cm Technical condition: used, excellent operating condition
6 departments 1 x steam, 1 x hot water, 2 x product to product, 1 x cold water, 1 x ice water Performance 8,000 litres / hour Clip seals total 423 plates Material of plates AISI 316 (V4A), thickness 0.8 mm
very well maintained APV tubular UHT plant. Suitable for the sterilization of highly viscous product with high dry matter, such as sauces and concentrates. Capacity in currently setup variable up to ± 3000l / hr. ( capacity up to 6000 lt/hr for low viscous products is possible with bigger homogeniser) Equipped with 2 ALFA LAVAL SHL20 Homogenizers, one in aseptic execution and with ball valves. Supplied with complete documentation and many spare parts. Yom. 1993, excellent condition.
APV Liquiverter TB-250-01. yom.1993, excellent condition. Batchcapacity 250 litres. with double wall for heating or cooling during mixing. The Flex-Mix™ Liquiverter is specially designed for products with low to medium viscosity in order to obtain a fast mixing of powders and particles with liquids. The Flex-Mix™ Liquiverter is usable for mixing, dispersion, recombination and reestablishment of soluble products. It is also used for reconstitution of dairy products, manufacturing of fine foods, emulsions, preparation of starch and hydrocolloid solutions
APV K 55 plate apparatus, 6 departments, Y.O.M.1994, late 2005 dismantled, cleaned, new clip seals and plates UV tested. test log exists. Power approx. 960,000 Kcal/h
Capacity: 240 hl/h 2 stages, Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm, Operating pressure: 23 bar, Length: 2000 mm, Width: 700 mm, Height: 2000 mm
The dealcoholisation is carried out by a dialysis membrane module consisting of up to 8 modules connected in parallel. The mass transfer is driven by the concentration gradient between beer and dialysate (water or dealcoholised beer)., Additional title: dialysis, Capacity: 3 hl/h remaining alcohol content: approx. 0,45 %; original alcohol content: approx. 5 %, Height: ca. 8,4 m, Operation / Control: Control cabinet with operating buttons and touch display, Features: 6 membrane modules, column DN400; plate heat exchanger TS6-MFG, Alfa Laval, year of manufacture 2006
Capacity: 240 hl/h 2 stages, Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm, Operating pressure: 23 bar, Length: 2000 mm, Width: 700 mm, Height: 2000 mm, Code: 18
