Veneer Press Moulding Press Bürkle Type FPMU Total baling area 2200 mm x 1100 mm divided into 3 faces, each 700 mm x 1100 mm the surfaces can be pulled out to the front per pressing surface 2 press pistons diameter 50 mm Maximum opening 430 mm Press surfaces not heated With emergency stop ripcord Hydraulic pump 1.1 kW Dimensions 3000 mm x 1300 mm x H 1920 mm
1- one combination of lay-up, turning and unloading 2- BTF Multifoiler 3- Multi-Pin-System Useful area 1330x2630 mm Max size of board 1250x2550 mm Min foil width 1400 mm
- Manufacturer: Bürkle - Type DAL 1-1300 R - Year of construction approx. 1990 - 1993 - Working width 1300 mm - Machine is overhauled, then very good condition - Working height 870 mm - Part height 3 - 80 mm - Operating side on the right - Paint application roller 50 Shore - Dosing roller hard chrome-plated approx. 174 mm - Rubberized counterpressure cylinder - Belt transport - Length 1050 mm - Feed adjustable via handwheel 6 - 30 m/min - Total connection approx. 2 kW - Weight 3250 kg - With control cabinet - Volts, Hz 400 / 50 - Machine number 4610.17 - Commodity code 8479 8997 - Voltage fluctuations max. +/- 5 % - Images only sample images
Roll Coater Bürkle Paint Roller Coating Machine Type SLC 1300 Machine No. 8540 Year of construction 1998 Working width 1300 mm Passage height 3 mm – 120 mm Workpiece length min. 350 mm Feed speed 6 – 30 m/min. Rubberized Paint Application Roller 55 Shore Paint application roller diameter approx. 238 mm Dosing roller chrome-plated Dosing roller diameter approx. 174 mm Counter roller diameter 186 mm Required pressure 6 bar Motorized height adjustment of the application roller Machine weight approx. 1500 kg Dimensions 800 mm x 2800 mm Instruction manual available Declaration of Conformity available With driven roller conveyor 13 rolls, wheels diameter 80 mm Roll width 1300 mm Dimensions 2500 mm x 1550 mm
Veneer press Bürkle Chair seat press and molding press Type SE 23 60/50 2 floors Electrically heated plates Pressing area 600 mm x 550 mm Maximum opening per floor approx. 180 mm Maximum opening 400 mm Plate thickness of the middle plate 45 mm Piston diameter 160 mm Hydraulic motor 1.5 kW Pressure according to the display up to 600 kg/cm² Dimensions 1400 mm x 550 mm x H 2010 mm
Recently reduced Commissioned on 31-01-1997 Back on sale due to time wasters Professionally dismantled Ready to load Spare rolls of veneer Spare oil
Working dimensions 250 cm x 130 cm You can call or write to us. We can speak and write German and Russian. You can also send messages in English 31.3.1
I am selling a heating air drying tunnel BURKLE Model: Easy Dry JET 1300 Filter: TRDUE / 700 m3/h Fan 7,5kW / 6800m3/h / 35 m/s Working width 1400mm Overall length 6.00m Electrical connection 36.5kW Heating air system 12 bladder units Heating medium water up to 80°C Max. heating capacity 45 kW Max. temperature of heating surfaces 120°C Siemens Simatic Touch Control Panel Year of construction 2014. System NEW, already not used ! Available soon.
Veenerpress „Buerkle Typ: U 110 3000 x 1300 8 Zilnder fi 70 mm electric heating golden eloxierten Plates 358 Bar 2,2 kw Presskarft 1100 kN Working condition , very good condition .
Veneer press Bürkle 310-1931 2500-1300 Plans and documents available The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12
Veneer press - School press - Experimental press BÜRKLE U40 built 1979 Ges. Power: 6.25 kW Nominal operating current: 14.5 A Power per heating plate: 2,750 W Plate size: 120 x 80 cm Electric Aluminum Heating Plates max. temperature: 120° C Opening width: 40 cm 4 hydraulic cylinders each with a diameter of 70 mm Nominal surface pressure: 4 kp/cm² max. surface pressure at 75% surface design: 5.5 kp/cm² Operating pressure: 260 bar Circumferential safety ripcord (emergency stop) Automatic opening (automatic opening after the preset time has elapsed) Press frame in dismountable design Weight: 1,350 kg Machine dimensions (approx. dimensions): L 165 cm W 96 cm H 173 cm School machine - The machine comes from a school training center.
Glue application machine BÜRKLE BDL 1300 Factory overhauled in 1988 Motor power: 0.37 kW (380V) Working width: 1.30cm max. rubberized roller width: 133 cm The rubber rollers are in good condition Height adjustment by handwheel. max. workpiece height / passage height: approx. 75 mm Machine dimensions (LxWxH): 195 cm x 62 cm x 142 cm Operating instructions available.
Bürkle Multifoiler Model BTF 1628/60 Year 1997 Plant for coating smooth and formed MDV parts with thermoplastic films, of roll or as a cut, for film PVC,PP,high gloss PVC,ABS. Suitable for thermoforming or membrane process. Max part size 1250x 2550 mm/ Divide thickness 6-35 mm Hot plate dimensions 1600 x 2800 mm max heating temperature 140° Stroke 230 mm Control Siemens Total connection 38 Kw Weight 16,5 t
Multifoiler BTF 1528 -1400 Rotation Standard machine version: 1- one combination of lay-up, turning and unloading 2- BTF Multifoiler 3- Multi-Pin-System Useful area 1330x2630 mm Max size of board 1250x2550 mm Min foil width 1400 mm
Technical specifications: Workpiece width min-max in mm: 10 - 1300, Workpiece length in min.mm: 100 Workpiece height min.-max. in mm: 3 - 120, Operating side: right, UV coating roller: yes, Adjustable direct drive for application roller: yes, Application roller speed m / min .: 5 - 30, Direct drive metering roller: yes, Chrome-plated metering roller mm: yes, Attachment roller: yes , Reverse drive: yes, Motors quantity: 5 pcs Motor capacity, Kwt: 50.75 Pump system: membrane
Table belt grinding machine Bürkle L x W x H: 3.5 x 1.7 x 1.8 m Built in 1963 Weight approx. 650 kg The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Two identical Bürkle veneer presses are available. Press area: 1200mm/2500mm. Stages: 1. piston: 6. piston stroke: 450mm. Total pressing force: 16t. Machine dimensions X/Y/Z: approx. 3250mm/1350mm/1950mm. Weight: approx. 2500kg. On-site inspection is possible.
Usefull width: 1300 mm Panel thickness: 3 - 80 mm Panel feed by carpet, variable feedspeed 6-30 m/min Coating roller 55° Shore with variable speed and scraper Chrome doctor roller with variable speed and scraper Machine length in the line: 1000 mm
Usefull width: 1300 mm Panel thickness: 3 - 80 mm Panel feed by carpet, variable feedspeed 6-30 m/min Coating roller 55° Shore with variable speed and scraper Chrome doctor roller with variable speed and scraper Machine length in the line: 1000 mm
Working width: 1300mm, workpiece thickness min./max.: 3mm/80mm, workpiece width min./max.: 10mm/1300mm, max. workpiece length: 100mm, workpiece height min./max.: 3mm/120mm, roller application speed: 5m-30m/min, feed: 6m-30m/min. Documentation available. On-site inspection is possible.
Manufacturer: IST, Type: UV Trockner, Year: 11.97, Work piece width min-max mm: 10 - 1.300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1.300, Number of lamps: 3, kW power 1 lamp: 10, kW power all lamps: 30, Lamps straight installation: yes, Adjustable: halblast, Power per lamp watt UV: 80, Conveyor lenght mm: ohne, Conveyor lenght mm: ohne, Year :11.97
Manufacturer: IST , Type: UV Trockner, Year: 11.1997, Work piece width min-max mm: 10 - 1.300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1.300, Number of lamps: 1, kW power 1 lamp: 10, Lamps straight installation: yes, Adjustable: halblast, Power per lamp watt UV: 80, Conveyor lenght mm: ohne, Conveyor lenght mm: ohne, Year :11.1997
Manufacturer: Bürkle, Type: EFA 1300, Year: ca.1990, PVAC-Dispersions-Folienkleber: yes, Work piece length min-max mm: 500-3200, Work piece width min-max mm: 200-1300, Work piece thickness min-max mm: 3-60, Kaschiergeschwindigkeit: 25, Doppelseitig Folienauftrag: yes, Folienrollenmagazin: 1, Feeding speed continous adjustable: yes, Inlet conveyor: yes, Querreinigungsbürste: yes, Bürstmaschine längs: yes, Plattenvorwärmzone: no, Kleberauftragmaschine : yes, Abwickeleinheit: yes, Prägekalander: yes, Leimfilteranlage LFA: yes, Intermediate transport mm: 3000, Year :ca.1990
Manufacturer: Bürkle, Type: EFA 800, Year: 1984, Working width mm: 600, Veneer thickness min mm: 0,15, Veneer thickness max. min: 0,7, Feeding speed max m/min: 8 - 35, Feeding speed continous adjustable: yes, Year :1984
Manufacturer: Bürkle Ersatzlackwalze 30 shore 1300 mm 80 Gang gerillt Neu<CRLF>Type: Lack-Ersatzwalzen, Spare roller: DAL/SAL/SLC, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1420, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: ca.20, Stahlkerndurchmesser ca. mm: 187, Creasing on a 1 cm: 80 Gang/gerillt,
Manufacturer: Bürkle Lackauftragswalze 1416 mm ca 25 mm Gummi shore ca 25 Ersatzwalze Neu, Spare roller: SAL/SLC/DAL, Bürkle: yes, Roller rubber coating: 238, Rubber coating length cm: 1415, Shore Härte: ca.25, Approx. thickness of rubber coating in mm: 30, Stahlkerndurchmesser ca. mm: 187, Creasing on a 1 cm: walze ist gelasert, Wedge follower: yes, Rubber coating defective: neu,
Manufacturer: Bürkle Lackwalze 1416 mm 30 shore 25 Gummi<CRLF>Gerillt , Roller rubber coating: gerillt, Rubber coating length cm: 1416, Shore Härte: 30,
Manufacturer: Bürkle UV Trockner, Type: UV Modul, Year: 2001, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 100, Number of lamps: 1, kW power 1 lamp: 80 W/cm, Lampen gerade eingebaut: yes, Adjustable: no, Position of lamps: gerade, Conveyor lenght mm: 5000, Chain pitch mm: 76, Drive power kW: 1,1, Working height in mm: 950 +/-, Through running hight mm: 3-80, Feedin speed m/min: 5-25, Rod transportation: yes, Year :2001
