Engine power: 22 kW Rotor length: 1000 mm Rotor diameter: 300 mm Hopper opening dimension: 1000 x 1000 mm Hopper height: 1000 mm Die diameter (grid): 20 mm

Drive power: 18.5 kW Hopper opening: 600 x 800 mm Hopper volume: 0.6 m3 Rotor diameter: 252 mm Rotor length: 620 mm Number of knives : 30 Knife dimensions: 30 x 30 mm 1 suction inlet Ø 160 mm Working principle of a VSL single-rotor shredder: The material is loaded by dumping from above into a hopper. A hydraulic feed pusher pushes the material to be crushed against the knife rotor, step by step depending on the motor. The shredding takes place between the rotating knives mounted on the rotor and a counter knife attached to the machine frame. After shredding has been completed, the material is transported via a suction system, an extraction screw or a belt conveyor. 1) The pressure bar pushes the material towards the rotor shaft. When the power absorbed by the motor increases, the tappet stops; it starts moving again and moves forward as soon as energy c ...

Slow shredder 2000 mm wide, with hydraulic pusher and swivel grate support Main motor power: 75 Kw Up to 1480 rpm Hydraulic pusher motor power: 7.5 KW Number of square knives : 58 Rotor speed: up to 110 rpm Rotor Ø 368 mm Diameter of the mesh outlet Ø: 20/40 mm Inclined hopper: height 1535 mm Upper part of the hopper: 3280 x 2750 mm Lower part of the hopper: 1800 x 2000 mm Weight: 6500 kg

WEIMA WL5 chipper-shredder Loading inlet 1000x800mm Rotor width 800mm 15kw main motor Number of knives 19 Rotor diameter 252mm 15/12mm sieve Autoreverse Outlet spigot 200mm DTR documentation Weight about 1500kg Net price