Model
(Manufacturer: DURMA)
DURMA MS 2504 mechanical guillotine shears were built in 2014 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, designed for precision cutting of workpieces with a maximum thickness of 4 mm, offers high reliability, precision and efficiency. Sheets made of among others stainless steel, copper or aluminium, are machined using high-quality cutting knives with adjustable gap between blades. Daily operation of the machine, on the other hand, is facilitated by the convenient foot switch and intuitive NC control. The DURMA guillotine shears weight 3230 kg. Technical specifications of the DURMA MS 2504 guillotine shears - NC control - maximum sheet metal length: 2550 mm - maximum sheet metal thickness: 4 mm - cutting angle: 1°30′ - number of strokes: 42/min - back stop stroke: 1000 mm - foot switch control - motor power: 7.5 kW - power supply: 3x 400 V; 50 Hz ...
used
Cutting lenght 6000 mm Cutting thickness 13 mm
Key data: 3100 mm, 6 mm
3100x6 mm control system DT 7
DURMA AD-SERVO 30175 CNC hydraulic press brake was built in 2016 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. This highly efficient machine is an effective answer to the daily challenges of modern business. The state-of-the-art technology used in it makes it more precise and energy-efficient than other presses on the market. The stress-relieved steel design, combined with economical drives, guarantees excellent bending results, even during the most intensive machining. All this is complemented by the intelligent CYBELEC CNC control with its intuitive interface. The DURMA AD-S 30175 CNC press brake weighs 11500 kg. Technical specifications of the DURMA AD-SERVO 30175 press brake - CNC controller: CYBELEC ModEva 15T - maximum press force: 175 t - maximum sheet metal length: 3050 mm - slider stroke: 265 mm - maximum weight of upper tool: 11 kg - maximum weight of bottom ...
Key data: 320 t, 3050 mm
320t cnc pressbrake, L: 3m stroke 365mm
DURMA VN 2006 hydraulic corner notching machine was built in 2016. The machine, equipped with state-of-the-art solutions and reliable components, is designed for machining workpieces made of plain and alloy steel with a maximum thickness of 6 mm. The machining process is performed on a robust, machined table with T-slots for fast and accurate tool positioning. Thanks to the automatic adjustment of the blade, high quality of material notching is achieved with the correct gradation and straightness of the cutting edge. The cutting angle is adjustable from 30° to 140° using knobs located on both sides of the machine. The three upper and four lower hydraulic cylinders in turn ensure that accurate and repeatable notching is achieved. The VN 2006 corner notching machine weighs 950 kg. Technical specifications of the DURMA VN 2006 corner notching machine - maximum workpiece thickness (60 ...
DURMA SB 3020 hydraulic guillotine shears built in 2008 in Turkey are an ideal choice for machining stainless steel, copper, aluminium and plain steel. Workpieces with a maximum thickness of 20 mm are cut using extremely precise, hardened cutting knives with manual adjustment of the gap between the blades. The high-quality monoblock design, combined with the hydraulic system, additionally ensures the highest stability and machining performance, even during the most demanding challenges. To facilitate the operator’s work, special transport rollers have been integrated into the work table, on which the workpiece is fed directly under the cutting line. The machining parameters are programmed in the intuitive DURMA ENC 100M control panel with clear LCD display and memory for 50 programs. The DURMA SB 3020 guillotine shears also features a driven back stop with T-slots and sockets with d ...
DURMA E 2040 CNC press brake which was built in 2009 in Turkey, offers the highest productivity and precision in workpiece bending, while maintaining low operating costs. The machine performs excellently even during the most intensive processing thanks to its extremely stable design, high press force of 40 tonnes and intuitive CNC control DURMA DU 6000. The work area is protected by the DFS LASER photoelectric safety device, which automatically switches off the machine’s power supply in the event of an interruption of the emitted laser beam. The price also includes tooling shown in the photos, worth 15 500 PLN. The DURMA E-2040 press brake weighs 4060 kg. Technical data of the DURMA E 2040 CNC press brake - CNC control: DURMA DU 6000 - maximum press force: 40 t - maximum workpiece length: 2050 mm - slider stroke: 160 mm - reach: 350 mm - distance between columns: 1650 mm - ap ...
DURMA MS 2004 guillotine shears were built in 2008 in Turkey. The machine, characterised by the application of many facilities and modern solutions, guarantees precise and efficient machining of, among others, stainless steel, aluminium, copper and plain steel. A sheet metal with a maximum thickness of 4 mm is fed through ball transfers built into the work table, whose design protects the surface of sensitive materials from scratches and nicks. All machining process parameters are programmed on the intuitive DURMA ENC-100M control panel with a clear LCD display and memory for 50 programmes. During the cutting process, the rigid design of the machine ensures that sheet deformations are within tolerance, making both the workpiece and the cut-off ready for further machining. The DURMA MS-2004 mechanical guillotine shears are offered with direct drive, high-quality cutting knives with adj ...
DURMA IW 55/110 BTD ironworker machine manufactured in 2014 in Turkey helps to significantly increase production efficiency while keeping operating costs low. The highly versatile and multifunctional machine has a rigid and stable frame made of steel plates with 5 work stations for precise hole and corner punching, as well as cutting flat bars, angle bars and solid bars. The DURMA hydraulic ironworker machine guarantee excellent cutting quality throughout their service life, thanks to the use of a hydraulic cylinder with a centrally located actuator. The total weight of the machine is 1660 kg. Technical specifications of the DURMA IW 55/110 BTD ironworker machine General data - punching force: 55 t - cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - cylinder stroke: 50-60 mm - number of cylinder strokes (20 mm stroke): 37/min - reach: 510 mm ...
used
Key data: 3100 mm, 6 mm
Working length: 3100 mm Cutting capacity: 6 mm Backgauge range: 750 mm Equipped with: - 3 sheet metal support arms - Rear access protection - Foot pedal Engine power: 11 kW Machine LxWxH: 3750 x 2350 x 1850 mm Machine weight: 5500 kg
used
Hydraulic press brake Manufacturer: Durma Country of manufacture: Türkiye Year of manufacture: 2014 Control: CNC 4-axis Cybelec type Force: 600t Bending Length: 6050 mm Distance Between Columns: 5100 mm Stroke: 365 mm Daylight: 700 mm Throat Depth: 510 mm Table Height: 990 mm Table Width: 154 mm Working Speed Y Rapid Speed: 80 mm/sec Y Working Speed: 7 mm/sec Y Return Speed: 80 mm/sec Motor Power 45 kW Length: 760 mm Width: 2650 mm Height: 3850 mm If you are interested, don't hesitate to contact me. I will send the price, photos and additional information.
Capacity: 160 ton Bending length: 3,050 mm Stand width: 2,550 mm Backgauge: 650 mm Bending speed: 9 mm/sec. Return speed: 86 mm/sec. Stroke length: 175 mm Projection: 350 mm Equipped with: - Light cabinet - Crowning - Press brake tools - Side and rear protection Motor power: 15 kW Machine LxWxH: 4250 x 2170 x 2800 mm Machine weight: 9200 kg
-moc rezonatora:6 kW -zakres obróbki: 3000x1500 mm -maksymalna grubość cięcia, stal czarnaj:18 mm -maksymalna grubość cięcia, stal nierdzewna: 8 mm -maksymalna grubość cięcia, aluminium: 6 mm
Large format fiber laser IPG 6000w 8000 x 2000mm Auto change table
Bending Lenght 3050 mm Bending force 135 ton Crowning Type Motorised Controller ModEva 19T CNC back gauge X - R Z manuel
Maximum cutting length: 3080 mm Maximum sheet thickness during cutting: 6 mm Maximum cutting angle: 2 st Total power requirement: 11 kW Rear stop: 1000 mm Machine height: 1950 mm Machine length: 4100 mm Machine width: 2050/3650 mm Machine weight: 7980 t
Cutting Lenght 6000 mm Cutting Thickness 16 mm Stroke per Min 10
sheet width: 4000 mm plate thickness: 6 mm stroke: 165 mm no. of strokes: 10-28 Hub/min total power requirement: 11 kW weight: ca. 9000 kg Overall size: 5150x2200x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 515 mm connected load: 11,0 kW stroke: 70 mm : 640 x 550 mm no. of strokes: 38 Hub/min hole diameter in sheet thickness: mm weight of the machine ca.: 1,95 t dimensions of the machine ca.: 1,6 x 1,55 x 1,9 m ith a wide range of accessories See pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This Durma TPL93 turret punch press was manufactured in 2019. Its a robust choice for precision punching operations. Consider the opportunity to buy this Durma TPL93 turret punch press. Contact us for more information.
This DURMA HD-F 3015 Fiber laser cutting machine was manufactured in the year 2015 in Turkey. Contact us anytime for further questions.
This 3-axis Durma IW 80/150 BTD Punching and Bending Machine was manufactured in 2022. It features a stroke of 70 mm and can perform up to 38 strokes per minute. With dimensions of 1000mm width, 2300mm length, and 2090mm height, it weighs 2510 kg. If you are looking to get high-quality punching and bending capabilities, consider the Durma IW 80/150 BTD machine we have for sale. Contact us for more information about this machine.
Fiber Laser, Fiber Laser Cutting Machine with Flatbed and Tube LaserLaser Cutting Machine, Laser Cutting Machine, Laser MachineManufacturer DURMATtype HD-F III 3015 III BH-IPG 2kWSeries No. 822817712 Year 2017with IPG Laser SourceSIEMENS SL 840D + CAD Software + Nesting SoftwareWorking Area 3000 x 1500 mmTube Cutting Device up to 400 mmLaser Power: 2000 Watts (Fiber Laser)Output Power: 0.2..2 kWWelle Length: 1070..1080 nmIPG Power Requirement: 6.4 kW/Hour- Polarization random-
sheet width: 2550 mm plate thickness: 4 mm total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity: 200 t Folding length: 4100 mm CNC Brand: Cybelec CNC Model: DNC 80 Make Durma 200 T Type HAP 40 200 Year 2001 Durma kantbank plooibank abkantpresse Cybelec DNC 80 Capacity (metric tons)Force = 200 T Folding length (mm)L = 4.100 Down stroke or Up stroke Crowning hand Tandem type CNC Cybelec DNC 80 UKB tool systemY1 / Y2 / X / R / Z Hand Large tooling package Troath = 350
CNC press brake Type: AD-S 1260 Manufacturer: Durma Year: 2017 Total hours: 2886 Number of strokes: 424005 Pressing force: 60 t Maximum bending length: 1200 mm Stroke: 265 mm Power: 7.5 kW Machine weight: 4700 kg Dimensions: 2500x2300x2900 mm Two separate rear stop inches Machine in good condition, under power Find more here - / Contact us at -
