Pos. 1.0 Precision Rotary Table Make EIMELDINGEN with aerostatic axial bearing Specifications Table diameter 3,400 mm Total height approx. 1,230 mm Centering bore Ø 250H7X 25 mm Permissible transport load 20,000 kg Holding torque of the table clamping 2,400 daNm Table speed 0.002 – 2 min Net weight approx. 22,000 kg Operating voltage 380 V, 50 Hz. 3 phases Control voltage 24V Positioning accuracy (without control errors) ± 1 Plan accuracy 0.02 mm Axial running accuracy 0.01 mm Concentricity deviation of the centering bore 0.01 mm Resolution of the displacement measuring systems 0.0001° Pos. 2.0 3-Axis Cross Bed Boring Mill Specifications Column stroke transverse X 500 mm Carriage stroke horizontal Z 650 mm Spindle box vertical Y 800 mm Rapid traverse speed Y + Z 8,000 mm/min Feed speed (infinitely adjustable) 0-1000 mm/min Spindle ...
Key data: 40 mm, 1200 mm
Specifications: Drilling capacity to the full: 40 mm Projection 1200 mm Motor power 3.5 kW Tool holder MK4
Speed in 2 steps : 1 = 30 - 200 rpm. 2 = 200 - 1100 rpm. Feed: 0.1 - 0.4 mm/rev Tool holder: MK5
centre height: 800 mm centre distance: 1350 mm fabric-no.: 10/6041 Cube: 750 mm x 600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ELHA machining center - The operating hours amount to 30,350 hours. Regarding the operating hours, it must be mentioned that due to the discontinuation of the last article run on the centre, it has not been used for production since the beginning of 2021. Due to a transport system that is currently still connected to the machining centre in terms of control technology, the machining centre could not be disconnected from the power supply, so it had to remain switched on and the operating hours increased despite the fact that production was no longer taking place. The effective operating hours of the machining centre during which production took place on the centre are therefore just under 11,500 to 12,000 hours. Find more here - / Contact us at -
Serial No. 510 Operating hours 41,494 Chip conveyor Automatic pallet and tool changer from Fibro Control system Siemens Sinumerik, Machine designation: Manufacturing module/machining center
Production line for housings consisting of:, 6 x multi-spindle machining centers ELHA FM4+X (model year 2005-2009), 1 x linking and storage device Felsomat” (model year 2008), 1 x deburring machine DÜRR (model year 2007), 1 x Premetec measuring machine including robot (model year 2016), 1 x Knoll coolant treatment system (built 2001 - 2009), Details of the individual machines are available upon request.
Serial No. 512 Operating hours 50,071 Chip conveyor Automatic pallet and tool changer from Fibro Control system Siemens Sinumerik, Machine designation: Manufacturing module/machining center
Serial No. 501 Operating hours 49,288 Chip conveyor Automatic pallet and tool changer from Fibro Control system Siemens Sinumerik, Machine designation: Manufacturing module/machining center
