HOLZHER streamer 1057 edgebander pre-milling cutters application of glue, glue patron system GLUE JET Suitable for PUR glue pneumatic pre-shear pressure rollers cutting balls at a ready-made angle up-down cutters R1, R2 Earning corners profile scraper flat cyclin Wrapping height max mm: 60 Veneer thickness in a roll max mm: 3 Machine length 460cm feed speed 10m/min
Key data: 6200 mm, 1300 mm, 300 mm
SPECIFICATIONS: Workspace: X: 6200 mm Y: 1300 mm Z: 300 mm 08 Clamping Plates with Suction Cups 01 Side tool magazine Turret tool magazine with 18 compartments Side stops (3 right + 3 left) 01 Vacuum pump: 250 m³ Siemens control system 18 spindles for vertical drilling 02 Double-sided spindles for horizontal drilling - X-axis 01 Double-sided spindle for horizontal drilling - Y-axis 01 Electrospindle 12 kW HSK water-cooled coupling 4-axis cutting/milling unit
Machine YOC 1992 Feed speed 8+16 m Solid wood edges, width up to 13 mm Rolls up to 3 mm Edge height max. 45 mm Aggregates: PE Hot Melt Glue Cartridge System Type 1906 1.9 kW Printing unit 1914 1 + 3 rolls Caps 1978, swivel 0-15 degrees Flush milling machineType 1942 2 x 0.6 kW Straight / chamfer up to 15 degrees Radius milling type 1943 2 x 0.6 kW Bevel 45 degrees Radius scraper blade type 1927 Buffing unit Length approx. 5,030 mm Width 1,760/1,605 mm Weight approx. 1,300 kg
Edge banding machine HolzHer Caps / flush milling L x W x H: 3.5 x 1.2 x 1.5 m Weight approx. 500 kg The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
Corner milling machine, radius milling machine for machining the corner edges. Banding thickness max. 8 mm Workpiece thickness max. 60 mm Workpiece width min. 90 mm Operation via foot pedal Incl. pull-out workpiece support Dimensions: approx. 700 x 600 x 1300 mm Weight: Approx. 140 kg Suction nozzle: 70mm
Inv. Num. : 7895 Type: 7321 Producer: Holzher Created: 1995 Parameters: Working length: 4100 mm Vacuum belt width: 1300 mm
Capping, grinding, scraping, wobbling Top condition
SPECIFICATIONS: Cutting dimensions mm: 4200 x 2050 Saw blade diameter mm: 250 Installed capacity KW: 4.0 Complete with workpiece roll
Key data: 5300 mm, 2200 mm
Standing Panel Sawmill Model Super Cut 1220 automatic, Working Area 5200 x 2200 with Fezer Plate Pliers 250 KG max. cutting width : 5300 mm max. cutting height : 2200 mm Saw blade diameter : 300 mm max. machining thickness : 80 mm Saw blade bore : 30 mm Swivel saw head : manual Saw feed : automatic Mounting : freestanding Suction : external suction Locking saw beam : manual Weight approx. : 1600 kg Dimensions : 6300 x 1500 x 2900 mm Power : 5.5 kW
Standing Panel Saw Model 1265 Super Cut Working area 5000 x 2200 Year 93 Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well as to inspect Terms of payment: Prices plus VAT. VAT, payment before pick-up or shipment Terms of delivery: ex location
Max Machining Dimentions : 3200x1190x70 mm Min Machining Dimentions : 200x70x8 mm Drilling head 15 spindles include sawing unit in X direction Linear tool changers 6
- Machining width max. 800mm - Workpiece thickness Max. 80mm - for further technical data see PDF
Control PPC 221 Belt bridge Pre milling 64 mm Glu jet automatic feed 10-18 m/min Min workpiece lenght 140 mm min workpiece width 60 mm worpiece thickness 6-60 mm edge thickness 0.4-8 mm
Flush milling machine HolzHer UF 362 with feed HolzHer 3 rolls Width max. 50 mm 2 motors 0.55 kW, 3 x 400 V, 50 Hz Year of construction 1984 Weight approx. 300 kg L x W x H: 120 x 100 x 130 cm The Fraese is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
Flush milling machine HolzHer UF 362 Year of construction 1975 L x W x H: 150 x 80 x 160 cm Weight approx. 440 kg The machine is in good condition, ready for operation, Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12
Edge gluing machine for 20 mm solid wood edges. Cartridge system, cross-cut saw, flush milling. Ready for demonstration from the location. Very good condition.
VERTICAL PANEL SAW type HOLZHER 1255 second hand machine volt. 380/50 max. working length mm.5300 max. working heigth mm.2200 CE mark : Yes
Edge glue machine HolzHer express 1437 Edge gluing, flush milling, caps flush milling with chamfer milling or RADIUS milling with sep. Aggregate Schwabelscheiben 2 mm and two units for chamfering or just milling milling ABS edge 2 additional units for RADIUS Hours of operation 1072.5 hours Masch. No. 721/9-203 L x W x H: 400 x 120 x 170 cm Weight approx. 900 kg Built in 1992 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Edge glue machine HolzHer express 1437 Glue, caps, flush milling, RADIUS milling / Beveling, scraping, cutting tool for rolling edges Total revision 10 years ago everything top Year of construction 1989 L x W x H: 500 x 120 x 170 cm Weight approx. 1800 kg The machine is in top shape, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Edge Abkappen thrower HolzHer Built in 1978 Weight approx. 220 kg L x W x H: 80 x 60 x 150 cm The machine is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Joining height: 95mm; Chip thickness: 0-8mm; Stop length without planer head: 1550mm; Stop extension: 600mm; including 3 rollers of feed Holzher: yes;
Edge thickness: maximum 20mm; Workpiece thickness: from 8mm - 60mm; Workpiece width: minimum 60mm; Leimangabe: cartridge; Cross-cut scissors: yes; Milling Station 1: Flush; Infeed ruler adjustment: manual; Workpiece thickness adjustment: manual; Power consumption: 7kW; Machine length: 2.8m; Machine width: 1.2m; Weight: 800kg;
incl. tripod---------- Technical data ---------- rolls: 3 pieces Sold as is, without technical inspection
Joining height: 95mm; Chip thickness: 0-8mm; Stop length without planer head: 1550mm; Stop extension: 600mm; including 3 rollers of feed Holzher: yes;
