Key data: 350 mm, 1000 mm
older, very well preserved KERN with lowered front bed guide
Industrial scale IFB 150K20DLM, weighing range 60 kg; 150 kg, readability 20 g; 50 g Mounted on trolleys Heavy-duty industry standard suitable for harsh use Platform: Stainless steel weighing plate, painted steel substructure, silicone-coated aluminium load cell, IP65 dust and splash water protection Large, backlit LCD display, digit height 52 mm Dimensions weighing plate, stainless steel W×D×H 650×500×142 mm Dimensions Evaluation Device W×D×H 250×160×58 mm
PRECISION SCALE M. No.: WD080052457 Equipment / Additional information: Max: 36 kg / d=10g
Control Manual Plus Turning diameter 260 mm Circumferential diameter 475 mm Center width 1000 mm Turning length 880 mm Spindle speed 3,000 min-1 4-fold parachute holder Tailstock
Key data: 280 mm, 560 mm, 3000 U/min
Turning diameter over bed 560 mm Turning diameter over support 300 mm Turning length 1000 mm Spindle bore 50 mm Tailstock quill holder MK 4 Machine weight approx. 3 t Space requirements approx. 3 x 2 m Digital display in X Accessories and Tools Army ø255mm Face Plate Lynette
Key data: 280 mm, 560 mm, 3000 U/min
Turning diameter over bed 560 mm Turning diameter over support 330 mm Turning length 2500 mm Spindle bore 65 mm Tailstock quill mount MK 5 Machine weight approx. 4.3 t Space requirements approx. 5 x 2 m Digital display in X Accessories and Tools, Lynette, 4 Jaw Chuck Army ø310mm
Specifications: Tip height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: (24) 16 - 1400 1/min Motor power, 2 stages: 3.0 / 6.0 kW Tailstock mount: MK 4 Quill stroke: 150 mm Dimensions (WxDxH), approx.: 2170 x 1180 x 1600 mm Equipment: - 3-axis digital display - 3-jaw lathe chuck - Emergency stop push button - Quick-change holder System Multifix - Machine light - Coolant device
Specifications: Tip height: 215 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: (24) 16 - 1400 1/min Motor power, 2 stages: 3.5 / 6.0 kW Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Face slide: 0.044 - 0.6 mm/rev Tailstock mount: MK 4 Quill stroke: 150 mm Dimensions (WxDxH), approx.: 2170 x 1180 x 1600 mm Equipment: - 3-axis digital display, brand: Heidenhain - 3-jaw lathe chuck, brand: Röhm ø 200 mm - Emergency stop push button - Quick-change holder System Multifix - Machine light - Coolant device - Guide and pull spindle safety device - Automatic lubrication for support - Moving center punch
Offer 24226 Specifications: - Largest circulation – Ø over bed 560 mm - via flat slide 380 mm - Center height 280 mm - Center width 2000 mm - Spindle bore 65 mm - Pick-up cone of the tailstock quill MK 6 - 20 spindle speeds 12 - 1200 rpm - Feeds - longitudinal -plan - Drive 400 V / 12 kW - with: - 3 axis digital display - Jaw chuck, SWS steel holder, tailstock - Coolant device, - Space requirement approx. W 4000 x H 1800 x D 1400 mm - Weight approx. 3000 kg
The machine was partially overhauled. Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 110 x 1750 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck, brand Forkardt 200 mm - Emergency stop push button - Quick-change holder System Multifix - Tension spindle cover - Lathe chuck protection with limit switch protection - Machine light - Coolant device The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels rene ...
The machine was partially overhauled. Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 1100 x 1680 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck, brand Forkardt 200 mm - Quick-change holder System Multifix - Tension spindle cover - Lathe chuck protection with limit switch protection - Machine light - Coolant device The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels renewed - Glass scales overhaule ...
The machine was partially overhauled. Built in 1981 Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Tailstock mount: MK 4 Gahvxg7a Quill stroke: 120 mm Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 1100 x 1750 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck - Lathe chuck protection with limit switch protection - Quick-change holder System Multifix - Tension spindle cover - Emergency stop push button - Coolant device - Machine light The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels r ...
Specifications: Center height: 230 mm Center width: 1000 mm Circulation diameter over bed: 475 mm Circulation diameter over bed slide: 320 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: (18) 25 - 2240 1/min Motor power: 3.5 / 6 kW, 2-stage Tailstock mount: MK 4 Quill stroke: 120 mm Longitudinal feed: 0.06 - 0.8 m/rev Transverse feed: 0.044 - 0.6 m/rev Weight, approx.: 1800 kg Dimensions (wxDxH), approx.: 2560 x 1200 x 1710 mm Equipment: - 3-axis digital display, brand: Heidenhain - 3-jaw lathe chuck ø 315 mm with reversible jaws - Quick-change holder System Multifix - Rotating grain tip - Lathe chuck protection with limit switch protection - Emergency stop push button - Coolant device - Machine light - Chip pan
Key data: 650 mm, 3000 mm
Kern CD 650 DMT / Cycle Lathe Year of construction 2008, Control Siemens 840 D, Travel X/Z 450/3,000 mm, Tool carrier Multifix, Turning length 3,000 mm, Spindle bore 103 mm, Three-jaw lining, Tailstock Conveyor coolant system, Connected load 48 KW,
Key data: 560 mm, 1200 mm, 380 mm
Lathe Core Three-jaw chuck Multifix B 2 Holder Spindle bore 52 mm Speeds 38 - 1900 rpm Steels Chuck Sharpen 380 V 25 A Length 2.80 m Width 1.00 m Height 1.60 m
Kern scale, up to 50 kg d=5 gr. 12V500mA with wheeled trolley with storage option Scales 50x40 cm Table 66 cm wide, 80 cm long, 50 cm high. 3 Slide-in Scales complete height 1.30 m
Control: HEIDENHAIN Manual Plus max. turning diameter over bed: 340mm max. turning diameter over slide: 150mm max. turning length turning length: approx. 580mm Wheelbase: 750mm Spindle bore: 52mm max. main spindle speed: 1 - 4,000 rpm Main spindle DIN 55027 Bayonet: Wedge bar chuck FN RHU-200 Collet by hand: F48 8-fold SAUTER tool turret Tool holder: VDI-16 Tailstock with quill diameter: 60mm Travel: 140 mm Tool cone: Mk 4 Space requirement L x W x H: approx. 2.50 x 1.60 x 1.70 meters Dimensions control cabinet L x W x H: approx. 1.25 x 0.5 x 1.7 meters Machine weight: approx. 2'400kg Note: This machine is not located in Schijndel, but in Eersel.
Stock number: 3736 PROCESSING Manufacturer: KERN, Type: HSPC 25-16 Machine NO.: 436, Year of construction: 2000 Specifications: Longitudinal movement (X) 250 mm Transverse movement (Y) 220 mm Spindle speeds 35000 rpm Total power 10 kW A-ash B: Aschse Grad Control HEIDENHAIN 426 M Fabr. Controlled in axes 3+2 Accessories: CNC rotary table. Cooling water system. Length: 2100 mm, Height: 2300 mm, Width: 1700 mm, Weight: 3500 kg
1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter, ...
Used KERN K980 paper-endless cutting machine. The continuous cutter meets all the requirements of computer printout processing at maximum speed. The proof is 34,200 high-quality cuts per hour.
PRECISION SCALE Ser. No.: WF131434 Readability (d) : 0,01 g Weighing range (max) : 3000 g Reproducibility : 0.01 g Linearity : ±0,03 g Smallest part wight for piece counting : 20 mg Reference quantities at piece counting: 10, 20, 50, 100, 200 Weighing Units: g, ct, Ib, oz, d, ozt, dwt, mo, tl h, tl c, tl t, t, bt, n Recommended adjustment weight, not added (class): 3000 g (F1) Warm-up time: 2 hours Stabilization time (typical): 3 sec Operating temperature : + 5° C + 35° C Humidity of air: max. 80 % (not condensing)
turning diameter: 282 mm turning length: 500 mm control: HEIDENHAIN Manualplus spindle turning speed - stepless: 5000 U/min tailstock quill taper MT: 3 weight: 1.5 t dimensions of the machine ca.: 2000x1800x1600 mmxmmxmm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis KERN CD 480/2000 horizontal turning machine was manufactured in 2010. It features a Heidenhain Manual Plus 620 control, C-axis, driven tools, a 12-fold revolver, and a chip conveyor. With a spindle speed of up to 3000 UpM and a spindle bore of 82 mm, its ideal for precise turning operations. Consider the opportunity to buy this KERN CD 480/2000 horizontal turning machine. Contact us for more information.
