Key data: 200 mm, 20 , 50 1/min
available Single 200mm Cold Feed Extruder Description attached!
Inv. Num. : 8150 Type: PDqV 4-500 Producer: KRUPP Created: 1972, GO 2008 Parameters: Compressive force: 500 t Table length: 3000 mm Table width: 1800 mm Distance between frame walls: 3100 mm Maximum stroke rate upper table: 11 1/min Ram stroke: 850 mm Adjustment of the ram: 350 mm Main motor power: 75 kW Machine weight: 158000 kg According to the GO in 2008, the press was in operation for a maximum of 100 hours. In the years 1972–2008, the press was operated in two shifts.
Screening machine KRUPP 18/50-1 Brand: Krupp Type: Grizzly Screen area: 5000 x 1800 mm - 1 decker Incl.: 22 kW electric motor
Cone crusher Krupp Brand: Krupp Type: 91-20 Year of construction: 1999 Incl.: electric motor, hydraulic system, electric control and new wear parts. Type: 90-8 Year of construction: 2000 Incl.: electric motor, hydraulic system, electric control and new wear parts.
Screening machine KRUPP 21/55-2 Brand: Krupp Screen area: 5500 x 2100 mm - 2 deckers Upper deck: [] 35mm Lower deck: [] 16 x 3mm Propulsion: 22 kW Incl.: springs and spring console In stock: 2 pieces
Stationary crane with pulverizer Brand pulverizer: KRUPP Electric water propulsion
used
Gebr. Mixing plant / tower plant Fabr. Krupp, control company Dorner, 1 x mixer THZ 3000 Teka, 1 x mixer THZ 1000 Teka, with 4 cement silos, hot water supply via biomass heating possible, aggregate storage in the tower, Feeding via elevator/vibrating chute and distribution belts, recycling plant with two separate agitator basins
TECHNICAL SPECIFICATIONS Manufacturer: KRUPP / KLEEMANN REINER Designation: Impact crushing plant and screening unit Design: semimobile, screw construction Year of construction: 1996 Complete treatment plant consisting of: Item 01) FEED BUNKER Bunker capacity: approx. 6 cbm Bunker insertion width (side): 4,270 mm Bunker insertion height: 6,800 mm Hopper elevation: 500 mm Item 02) BUNKER VENT Type: FUF 1200-250x3500 Usable width: 1,200 mm Length: 3,500 mm Installation inclination: horizontal Drive power: 2 x 3.5 kW Item 03) CIRCULAR VIBRATING SIEVE Type: Turbo 1.4 x 1.8 - 2D Screen version: Two-decker Screen width: 1,400 mm Screen length: 1,900 mm Total length: 2,200 mm Drive power: 11 kW Item 04) HAND-HELD STATION - Between feed hopper and impact crusher - Conveyor belt with access on both sides - Enclosed and protected from the weather Item 05) ...
TECHNICAL SPECIFICATIONS Manufacturer: THYSSEN KRUPP Fördertechnick Description: Chain conveyor, scraper conveyor Type: OTK 440/1200x9408 Design: stationary, heavy version Year of construction: 2001 Drive type: slip-on geared motor, planetary gear Drive power: 55 kW Length chain conveyor: 9,400 mm Chain conveyor width: 1,200 mm
one batch of clutches (unused) Brand : Krupp Diameter from 200mm to 800mm. Dead. Weight about 25-30 tons
Electric magnet block. Brand: Krupp. Block : L= 1650 x W=1200 x H=600 mm. Power requirement block = 7 kW, 35 Amp. Weight about 3.5 – 4 tons. Included rectifiers (new).
Krupp Electric Magnetic Belt, heavy duty Block : L= 1650 x W=1200 x H=600 mm Power requirement block = 7.7 kW Power requirement drum motor = 5.5 kW Belt width : 1400 mm - A.A. 3200 mm Speed : 2.5 Mtr./sec. Included rectifiers (new) Weight approx. 7500 kg Stock 3 pieces
Screening machine KRUPP / Hazemag Brand: Krupp / Hazemag Type: CK 803 Screen area: 5600 x 1550 mm - 3 deckers Incl.: electric motor and steel construction.
Screening machine KRUPP 16/70-2 Brand: Krupp Type: DU 14 Screen area: 7000 x 1600 mm - 2 deckers Incl.: 30 kW electric motor and springs
Various spare parts for Krupp impact splitter N90. Except for the roto plate, all are unused new parts
hydraulic concrete steel Benders Krupp Futura B 703 steel bending machine with accessories and complete instructions Tech. Data performance table - steel 50-55 kp/mm2 Diameter 22 mm - 6 bars per bending, 28 mm-4, 32 mm 3,. Mtfgtw 50 mm 2 speed 4-12 / min Operation - with control or manual, operating dial - HAND - machine with possibility of 3 bending angle set - every page - 3 links + 3 right complete documentation, operating instructions much accessories more info upon request You can edit, flat, round steel accessories - various bending rollers, bolts, reducing roll, Overarm and the machine has device for Pipes. Bulk 2.3 x 1 x 1 m, Btto 1500 kg
Transfer press KRUPP PST-A 160 built in 1980. Technical data of the KRUPP PST-A 160 press: - nominal pressure: 160 tons - cutting force grade 1: 400 KN - force between stands: 1200 KN - number of working steps including cutting stage: 11 - distance between stands: 200 mm - slider stroke: 210 mm - drawing depth: 70 mm - range of jumps, infinitely adjustable: 15-75 / min. - production range of jumps with repeatability of its setting: 25-75 / min. - number of actuation movements: 15-25 / min. - a usable work resource for a jump in the range of 25-75 strokes per minute. : 20,000 J - maximum load on a single step: 500 KN - maximum load of a single step using inserts: 630 KN - maximum width of the tape: approx. 340 mm - maximum diameter of the cut: 120 mm - minimum diameter of the pattern: 30 mm - distance between stands: 2450 mm - height of tool building at the lower posi ...
used
Type: 6B R1. Beading machine for edges from 20-100 mm (diameter). Workpiece height: Max. 50 mm, plate thickness: Max. 0,5 mm.
Type: 6B R1, beading for bearings of 20-100 mm diameter. Workpiece height: Max. 50 mm, Sheet thickness: Max. 0.5 mm.
Motor power: 90kW, with control cabinet, the vertical crusher is located in an enclosure.
pressure: 100 t throat: - mm stroke: 8 - 116 mm total power requirement: 8 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: ca. 2,5 x 2,5 x 3,5 m No. 0778 Single-column eccentric press 1000 kN Stroke adjustment 8-116 mm, stroke rate 65/min, ram adjustment 80mm, Space requirement2.1x 1.7 x 3.1 m, Weight approx. 7500 kg Stand tiltable, 10°/20°/30° Working area: table 800 x 560 Drive: 8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Single column - eccentric press KRUPP type PEKRD 125 hMasch. No. 2861 Year of construction 1977Compressive force 125 ton. Projection 400 mmTable size 950 x 750 mmPlunger area 800 x 540 mmTable opening 100 x 250 mmStroke adjustment 8 to 160 mmPlunger adjustment 100 mmInstallation height largest stroke at the top max. 550 mmStroke rate 60 strokes/min. Table height above floor 800 mmEngine power 10 kWNetz connection 380 Volt, 50 Hz- Hydraulic overload in the plunger- Compressed air clutch-brake combination ORTLINGHAUS-
Single column - eccentric press KRUPP type PEKRD 125 h Masch. No. 2861 Year of construction 1977 Compressive force 125 ton. Projection 400 mm Table size 950 x 750 mm Ram area 800 x 540 mm Table opening 100 x 250 mm Stroke adjustment 8 to 160 mm Ram adjustment 100 mm Installation height Largest stroke at the top max. 550 mm Stroke rate 60 strokes/min. Table height above floor 800 mm Motor power 10 kW Mains connection 380 volts, 50 Hz - Hydraulic overload in the plunger - Compressed air clutch-brake combination ORTLINGHAUS- Lifter weight-compensation cylinder - Motorized ram adjustment - Table top with ball rollers - Two-hand operation- Grease central lubrication HELIOS- Stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm Weight approx. 10 ton. good condition (very little used); used
pressure: 100 t throat: - mm stroke: 8 - 116 mm total power requirement: 8 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: ca. 2,5 x 2,5 x 3,5 m No. 0778 Single-column eccentric press 1000 kN Stroke adjustment 8-116 mm, stroke rate 65/min, ram adjustment 80mm, Space requirement2.1x 1.7 x 3.1 m, Weight approx. 7500 kg Stand tiltable, 10°/20°/30° Working area: table 800 x 560 Drive: 8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Single stand - eccentric press KRUPP type PEKRD 125 h Masch. No. 2861 Year of construction 1977 Compressive force 125 ton. Projection 400 mm Table size 950 x 750 mm Ram surface 800 x 540 mm Table opening 100 x 250 mm Stroke adjustment 8 to 160 mm Ram adjustment 100 mm Installation height largest stroke top max. 550 mm Number of strokes 60 strokes/min. Table height above corridor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in the tappet - Compressed air Clutch-brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram position - Table top with ball rollers - Two-hand operation - Grease central lubrication HELIOS- Stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm Weight approx. 10 tons. good condition (very little used); used
Manufacturer: Krupp - Type: 4 - Inlet size: 630 x 355 mm - With Electrical motor
Manufacturer: Krupp - Type: 6 - Inlet size: 1.000 x 630 mm - With Electrical motor - Crusher is sandblasted and painted
OVERHAULED - Size: 1.600 x 2.000 mm - With Electrical motor and springs.
plate width: 1.100 mm plate depth: 2.200 mm plate height: 350 mm weight of the machine ca.: 1,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
