Toshiba MMY-MAP1604HT8P-E Air Conditioner Outdoor Unit with 6 Toshiba 4-way ceiling cassette for cold and heat incl. original Toshiba remote control Cooling power: 45 kW Power heating: 50 kW Refrigerant: R410A 2 sets available, each with 1 outdoor unit and 6 indoor ceiling cassettes including remote control Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: info(a)frigocom.at
Toshiba MMY-MAP1204HT8P-E Air Conditioner Outdoor Unit with 6 Toshiba 4-way ceiling cassette for cold and heat incl. original Toshiba remote control Cooling power: 33.5 kW Heating power: 37.5 kW Refrigerant: R410A Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: info(a)frigocom.at
Inv. Num. : 5851 Type: IS 280 GS Producer: TOSHIBA Created: 1996 Parameters: Operating hours: 24,593 h Total number of injections: 7,410,962 Clamping force: 2774 kN Screw diameter: 60 mm Injection capacity: 930 cc Injection mass: 855 g Min. height of the clamping plate: 900 mm Min. width of clamping plate: 900 mm Distance between uprights (horizontal): 610 mm Distance between uprights (vertical): 610 mm Ejection force: 152 kN Ejector stroke length: 760 mm Maximum Spray Pressure: 192 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1900 mm Machine height: 1900 mm Injection weight: 12400 kg
Toshiba B-EX4D2 Direct Thermal Label Printer -Printing technology: Direct thermal -Resolution: 203 dpi -Max. print speed: 305mm/sec -Max. print width: 104mm -Max. print length: 1,498mm -
Key data: 130 mm, 4000 mm, 2500 mm
TOSHIBA BP-130R22 Year 2007 SPINDLE DIAMETER 5.12 (130mm) TAPER IN SPINDLE #50 VERTICAL TRAVEL, Y-AXIS 100 (2500mm) CROSS TRAVEL, X-AXIS 160 (4000mm) SPINDLE TRAVEL, Z-AXIS 28 COLUMN TRAVEL, W-AXIS 60 TABLE SIZE (BUILT IN B-AXIS) 86.6 X 70.8 TABLE LOAD CAPACITY 44,000 LBS TABLE INDEXING B-AXIS 0.001 DEGREE SPINDLE SPEEDS (3-RANGES) 5-2500 RPM EQUIPPED WITH: TOSNUC 888 CNC CONTROL 60-STATION AUTOMATIC TOOL CHANGER THROUGH SPINDLE COOLANT CHIP & SPLASH ENCLOSURE CHIP CONVEYOR 40/30 HP SPINDLE MOTOR NOTES: INSPECT IN PLANT UNDER POWER
CNC controller: FANUC 15i-M Axes X-axis travel mm: 9.000 Y-axis travel mm: 3.900 Z-axis travel mm: 900 W-axis travel mm: 1.600 (distance between columns 3.100 mm) Distance spindle nose - table surface mm: 2.440 Feed rates m/min: 6 (X,Y,Z) 3 (W) Rapid traverse m/min: 20/9 (X,Y) 10(Z) 6(W) Worktable Number of pallets: 2 (table automatic changer) Table dimensions mm: 2.700x8.000 Max. workpiece weight kg: 20.000 Spindle Spindle speed rpm: 5-3.000 (2 ranges) Spindle drive power kW: 30(50% ED)/22 Spindle torque Nm: 2.170 Tool system Tool holder: MAS BT50 Tool magazine slots: 180 Equipment Chip conveyor Signal lamp High pressure pump Tool breakage probe Preapared for RENISHAW sonde RENISHAW Measuring probe Rated power kVA: 150 AAC (Automatic Attachement Changer): Capacity = 5 Attachements and their cases: 1) Snout 190 2) Small Angle head 5 Faces Cutter Head Aut ...
215 MW Toshiba Inlet Steam Turbine & Generator (Unused and well maintained) New in 2008, this Power Plant has never been used and is available for immediate inspection and delivery. Never having been used, the Plant has no wear whatsoever. The Steam Turbine: Extraction & condensing, Inlet pressure: 104 bar, Output: 215MW Extractions: MP2: 22 bar, MPI: 10 bar, LP: 4.5 bar, Feed Water: 0.4 bar Minimum load: • No extractions, Only bleeds, Steam flow: 45 kg/s Maximum load: Steam flow: 270 kg/s The turbine is a Single Flow Extraction Condensing type. Steam initially enters the steam inlet flange near the end of the high pressure section and flows through the turbine stages toward the generator end of the unit. After passing through the turbine stages, the steam is exhausted to condenser. The exhaust hood is keyed to the foundation plates at a point near its center ...
Spindle size: dia 230 / ISO 60 X travel: 9000-25000 mm Y travel: 5000 mm Z travel: 1500 mm W travel: 1750 mm Spindle speed: 800 RPM Rotary table: - Surface: 4000 x 4000 mm - Travel: 2500 mm
Inv. Num. : 5849 Type: IS 220 GN Producer: TOSHIBA Created: 2002 Parameters: Clamping force: 2150 kN Screw diameter: 50 mm Injection capacity: 490 cm³ Injection mass: 450 g Min. height of the clamping plate: 870 mm Min. width of the clamping plate: 820 mm Distance between stands (horizontal): 610 mm Distance between stands (vertical): 560 mm Ejector force: 140 kN Ejector stroke length: 800 mm Maximum spray pressure: 201 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1340 mm Machine height: 1840 mm Spray weight: 8600 kg
Toshiba cassette climator RAV SM804UT-E incl. outdoor unit RAV SM803AT-E; Consisting of: 1 x Toshiba 4-way cassette transformer RAV SM804UT-E 1 x outdoor unit RAV SM803AT-E 1 x Standard Remote Toschiba RBC-AMT32E inverter compressorheating function room size large 50m2 max 115m3 The new 4-way cassette is A newly developed turbo axial fan allows the geraete to work very quietly While the improved design of the ceiling panels guarantees a perfect air distribution with very low temperature differences. Main ceiling panels with direct or wide semite-emitting airflow Individual multi-lame control function Auto diagnostic system Very low size height of only 256 and 319 mm Fresh air supply with external fan possible unit: RAV-SM804UT E Cooling power (power range) kW 6.70 (1.50-7.40) Power consumption kW 2.09 EER W/W 3.21 SEER 5.6 3heating power (power range) kW 8.00 (1.50-9.00) Heat power ...
Toshiba DC 350 C Horizontal Cold Chamber Aluminum High Pressure Die Casting Machine Locking Force: 350 tons Platen Size: -static: 945 x 960 mm -movable: 935 x 935 mm Tie Bar Diameter: 125 mm Clearance Between Tie Bars (V x H): 580 x 580 mm Die Thickness (max - min): 700 - 300 mm Die Stroke: 420 mm Injection Stroke: 480 mm Injection Positions: 0 and -125 mm Ejection Stroke: 20 - 90 mm Main Motors: 22 kw Machine Weight: approx. 13 tons Including: Electric, Sprayer, Extarcor, conveyer DCC series die casting machines - with pressure spike reduction, flash prevention and independent control of injection speed and pressure
Manufacturer: Toshiba, Type: EX 40-4MCRD2, Modell: Programmmable Controller, Seriennummer: 94N-2025,
Manufacturer: Toshiba, Type: Programmable Controller, Modell: EX20-1MCRB5, Seriennummer: 5602167,
Manufacturer: Toshiba, Type: Programmable Controller, Modell: EX20-1MCRB5, Seriennummer: 5602167,
Manufacturer: Toshiba, Type: EX 40-4MCRD2, Modell: Programmmable Controller, Seriennummer: 94N-2025,
spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1500 mm z-travel: 1450 mm table surface area: 1400 x 1600 mm taper ISO: 50 spindle speed:: 2 - 2500 Control: TOSNUC 7-3 total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
