Bagging machine for valves and open bags, Fabr. Wagner Oberursel, Type:WAMA SP-Standart Plus. Weighing range 5-30 kg, Product contact in stainless steel, Many accessories available
Key data: 600 mm, 400 mm, 90 mm
Electro-Permanent Magnet Clamping Plate Type 1150V-40/60-14
Offer 24402 Specifications: - Drilling capacity in steel 50 mm - Drilling spindle holder MK 5 - Drilling spindle stroke 315 mm - Projection min / max 350 / 1600 mm - Column diameter 350 mm - max. / min. – distance: - Spindle – base plate 350 - 1250 mm - Vertical stroke of the boom 580 mm - 16 spindle speeds 25 - 2000 rpm - Feed rates 0.04 - 3.2 m/rev - Drilling spindle drive 400 V / 4 kW - Lift drive 1.5 kW - Column clamping 0.75 kW - Dice table - Coolant device - Space requirement approx. W 2490 x H 2645 x D 1060 mm - Weight approx. 3500 kg
Electric Forklift Trucks Pallet Stackers Manufacturer: Wagner Type: EK 11 Year of Make: 1995 Lifting weight: 1,000 kg Lifting height: 2,500 mm
Loading lift table for covered outdoor areas – used- : Price from location: 6.950.-€ (net)! Manufacturer: Wagner Type: Lift table in special design, ELS 1-10-TI-SO Year of construction: 2017 Height (h): 200mm Effective stroke (N): 1000mm Maintenance stroke: 1000mm Final height (H): 1200mm Total length: 1,800mm Total width: 1,000mm Stroke category: 4 Weight: approx. 450kg Load: Load capacity: 1.000kg Load distribution: surface load or max. 1/6 lifted as wheel load Can be driven over when retracted: No Platform: Platform length: 1,800mm Platform width: 1,000mm Railing pluggable Condition: very good Available: now Location: Stuttgart-Feuerbach A detailed description of the article is available on request. Application: Loading lift table for the covered outdoor area, narrow side C is located on the ramp. A Euro pallet is transported with pallet trucks. ...
Tailstock stroke max. 130 mm Specifications: Turning diameter max. 360 mm Turning diameter over support 180 mm X-axis travel 230 mm Z-axis travel 620 mm Control SINUMERIK 828 D Spindle bore 40 mm Weight approx. 1600 kg Dimensions (LxWxH) approx. 2510x1670x2050 mm Year of construction 2014
ID2841 Wagner WS22 year/Bauahr 2010 ran only a little 3.7t Shredder, 22 KW Shredder, 22 KW
Radial Drilling WAGNER type PRC 35 Spindle CM4 Spindle exit: 220 mm Spindle speed: from 32 to 2500 RPM Arm/trolley travel: 700 mm Year of construction: 1989 Column diameter: Ø 230 mm Max height table/spindle nose: 1000 mm (table in high position) Automatic descent Hydraulic locking of the column rotation + trolley Mechanical locking of the up/down Cube dimensions: L 800 x W 450 x H 450 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 900 x 2250 mm in high position Weight: approx 2 T
used canning press / packaging press Manufacturer: WAGNER Type: WDSP 7000 Year of construction: 1993 specifications: Pressing force: 70 t Specific pressing pressure: 318 kg/cm² Drive power: 15 kW / 400 V Duct format: 550 x 400 mm Filling opening L x W: 1,150 x 550 mm Compaction chamber: 700 x 550 x 400 mm Total stroke: 2,100 mm Machine length: approx. 5,500 mm Machine width: approx. 1,920 mm Capacity: approx. 1.5 t/h (depending on material) Package size, WxHxL: 550 x 400 x 280 - 550 mm Package weight: approx. 20 - 40 kg (depending on the setting of the package length) Machine weight: approx. 3,500 kg
Max. longitudinal movement of the table: 400 mm Z-axis stroke: 200 mm Digital display of travel paths Tool holder: SK 40 Weight: approx. 1000 kg
Wagner Electric Magnet Strap Brand: Wagner Length frame A.A.= 2600 mm Belt width : 1000 mm Drive: 2.2 kW drum motor Block : 1250 x 950 x 450mm Power requirement : 3 kW Inclusive rectifiers.
High-rack stacker with 1.2 m lateral insertion path Lifting capacity 1 t Lifting height 10 m Battery still very good Forklift is still in very good condition, has been serviced regularly.
Machine Details Stock-No. 1105-03885 Type of machine CNC Lathe - Inclined Bed Type Make WAGNER Type WDC 480 Year of manufacture 2014 Type of control CNC Storage location HAGUENAU Country of origin UK Delivery time Immediatly Freight basis ex warehouse, loaded Technical details turning diameter 295 mm turning length 1250 mm control SIEMENS 828 D max. swing diameter 460 mm spindle head KK6 DIN 55026 Bar Material Dia. 52 mm turning speed range 3500 rpm spindle drive 7 kW Torque 151 Nm tool diameter 32 mm Rapid Traverse 30/15 m/min total power requirement 18 kW Weight of the machine approx. 3.4 t dimensions of the machine approx. 2.5 x 1.7 x 1.8 m Accessories Power Chuck 250 mm Additional information CNC SIEMENS 828 D TURRET VDI 30 with REITSTOCK CHIP CONVOYER
WAGNER FCU 1600 universal milling machine manufactured in Germany in 1998 is designed for precision machining of workpieces in X,Y,Z axes with feeds of 1200 mm (X axis), 700 mm (Y axis) and 500 mm (Z axis). The machine characterised by its high reliability and efficiency performs the milling of workpieces on a large work table with a length of 1600 mm and a width of 500 mm using a precision spindle rotating at a maximum speed of 2050 rpm. The milling machine is also equipped with measuring rulers and digital readouts. The total weight of the machine is 4000 kg. Technical data of the WAGNER FCU 1600 milling machine - feed rates in the X/Y/Z axis: 1200/700/500 mm - feed speed in the X axis: 10-1000 mm/min - feed speed in the Y axis: 10-1000 mm/min - feed speed in the Z axis: 5-500 mm/min - rapid traverse in the X/Y/Z axis : 3000/3000/1500 mm/min - working table dimensions (L x W): ...
Electromagnet with large depth action for extracting ferrous parts from a material stream, oil-cooled design. Including control cabinet with 22 V DC power supply (type: 312-220/20, for connection to 400 V / 50-60 Hz) and overhead duo-rail installation (ca. 4.5 m long x 2.5 m high) for moving the magnet. By switching off the magnet above the drop point attracted ferrous parts are removed.
CNC machining center - X: 650 mm - Y: 510 mm - Z: 510 mm - Clamping surface: 800 x 450 mm - T-slots: size/number/distance 18/4/100 mmm - Table load: max. 400 kg - Working height: 760 mm - Spindle Ø: 65 mm - Speed range: 8000 rpm - Spindle power: 7/9.25 kW - Tool holder: SK 40 - WZ changer: 16-fold - Tool Ø max.: 80 mm - Tool length max.: 250 mm - Tool weight max.: 6 kg - Rapid traverse: 16000 m/min - Control: Siemens 802D - Machine weight: 3500 kg - Dimensions for space (W x D x H): 2.15 x 2.1 x 2.45 m - Condition: good Accessories Documentation, no other accessories
Used WAGNER Flexcontrol Plus mixing and dosing system control Electronic 2K mixing plant for high and low pressure requirements. For solvent paint 2K, 3K and 4K varnishes and adhesives Water-based 2K, 3K and 4K paints and adhesives With operating instructions Comes from company dissolution Functioning Original price of the controller approx. 8000.-Euro Good condition.Inspection and pick-up possible. Shipping Germany (without islands) 100,00 Euro net Sale to traders without warranty The goods can be viewed at the location 59379 Selm by appointment. Company Michael Bergau Tel. 0152/29500504 You will receive an invoice with VAT shown. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.
used lift-tilt device Manufacturer: WAGNER UMWELTTECHNIK Type: W HKV Year of construction: 2008 Load capacity:500 kg Drive power: ___ kW
used non-ferrous separator Manufacturer: WAGNER Type: 0428-25/60 Machine No.: 214401 Year of construction: 1994 specifications: Conveying width: approx. 600 mm Throughput: 40-65 m³/h Belt speed: 0.12 m/sec to 1.3 m/sec Weight: approx. 1,200 kg Protection class: IP 54 (control device) Motor rotor drive: 3.7/4.7 kW Motor belt drive: 0.75 kW
Electrostatic painting line Wagner with conveyor Technical specifications: Pumps for providing of material Leopard 35-150,pcs -2 Washing pump Leopard 35-70 Painting manipulators + guns, pcs - 2+4 Capacity, Kwt - 5,5 Max. material pressure at the pump inlet, MPa-Bar-Pound / m² - 2-20-290 The pH value for the material, pH - 3.5 ÷ 9 Material temperature range, ˚С - +5 ÷ +80 Ambient temperature range, ˚С - +5 ÷ +60 Permissible angle of inclination at work, ˚arcs - ± 10
Description Brand Wagner Model Cobra 40-25 ID 7206 Status Active Price 2.600 € + VAT Year of manufacture 2014 Location Oradea (RO) High pressure diaphragm pump for coating Wagner Cobra 40-25 manufactured in 2014. Pressure ration: 40:1, Maximum fluid pressure: 250 bars, maximum flow rate: 5 l/min, weight: 32 kg. Application areas: wood and furniture industry, carpentry shops and joineries, agriculture, construction and earth moving, general metal industry, leather coating. Processable materials: water and solvent-based paints, wood coatings, moisture-sensitive materials, isocyanates, shear-sensitive coatings, UV-cure materials, temperature reactive materials (acrylics, for example), zinc primers. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least ...
Wagner SCR 160 well-kept radial drilling machine. Throat depth 1600mm. Speeds from 25 to 2000 RPM. Feed 0.04-3.2 RPM. Clamping table 630 mm x 500 mm x 500 mm. Cooling metering pump.
Stable Eletro-thrust mast forklift Wagner Capacity: 1250 kg Lifting height: max 7.1 m 24 volt system - 3 wheel - Tripplingmast smooth starting and driving Stable wide wheel base very guterStand Hydr functions: Lifting - thrust (forward) - tilt - side-shift Truck weight without Batt.: 2680 kg Battery weight: 611 kg Mass approx.: width: 1.71 m length: 1.78 m (eingefah. Thrust mast) Height: run-in mast: 3 m Tine length inside 90 cm Accessories: Charger & battery (used) The truck is in very good used condition vorfuehrbar in stock
This WAGNER WDE 500 was manufactured in 2012. A robust horizontal turning machine featuring a Siemens 802-C control interface, it includes a three-jaw lathe chuck, quick-change tool post, and manual tailstock. The machine is equipped with a complete coolant system and an enclosure with safety features. If you are looking to get high-quality turning capabilities consider the WAGNER WDE 500 machine we have for sale. Contact us for more information.
An older Wagner bagging system for non-lumpy bulk materials including an automatic scale is available. An on-site inspection is possible.
A Wagner fusing press is available. Panel dimensions X/Y: 1020mm/1020mm, heating capacity: 20.4kW, connected load: 21kW. Documentation available. On-site inspection is possible.
Weight: 10.000 kg Year: 1991 Control: Heidenhain 355 serial number: 9101291 x-axis: 2500 mm y-axis: 940 mm z-axis: 1000 mm : 2100 table length: 2600 mm : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X/Y: 230mm/870mm, speed: 3000rpm, max. spindle bore 52mm, max. turning diameter over bed/face slide: 360mm/180mm, max. workpiece length: 870mm, bed width: 1000mm, max. tailstock stroke: 130mm, max. quill diameter: 63mm. Dimensions X/Y/Z: approx. 2500mm/1700mm/2000mm, weight: approx. 1600kg. Documentation available.
A complete Wagner WBX 1003 boring mill is available. Control: CNC Systems WB 1000, documentation is available.
This 3-axis WAGNER VMC 1100 was manufactured in 2016 and features a Siemens Sinumerik 828D control system. It offers a travel distance of X-axis: 1100 mm, Y-axis: 650 mm, and Z-axis: 600 mm. The spindle can reach up to 8,000 rpm, and it includes a 24-slot tool magazine. Equipped with a Renishaw part probe and prepared for 4th axis integration. Contact us for more information about this machine.
