Control Fanuc 32iB Max. turning diameter 290 mm Bar passage 71 mm Max. turning length 560 mm Spindle speeds 5,000 min-1 Y-axis +55/-50 mm 12-fold revolver with applied revolver Competition. Sub-spindle C-axis on main and counter spindle Collet chuck Short bar loading magazine IRCO ILS MUK Conveyor Various tool holders
Key data: 380 mm, 650 mm
CNC lathe with driven tool stations Manufacturer : Biglia Model : B 658 MB CNC Control: FANUC Series 18i-TB Year of manufacture : 2004 Condition : good , fully functional Location : Hultsfred -Sweden Availability : in stock Specifications Maximum turning diameter: 380 mm Maximum rod diameter: 80 mm Maximum passage: 620 mm Maximum turning length: 650 mm Feed in the X/Z/B axis: 220/650/660 mm Rapid traverse in the X/Z/B axis: 20/24/12 m/min Spindle speed: 30-3000 rpm Spindle bore diameter: 90 mm Spindle tip height: 1055 mm Inner diameter of the front bearing: 130 mm Spindle End: ASA 8 Spindle drive power: 26/22 kW Diameter of the lathe chuck: 315 mm 12-position bidirectional turret Outer lathe chisel shank: 25×25 mm Shaft of the internal turning tool: ⌀ 40 mm Indexing of the turret (by 1 position): 0.1 s Driven tool stations 12 positions Max. speed driven ...
Commissioning 2024 Switch-on hours 2900 h Spindle hours 665 h FANUC iHMI control with 15 touch Main spindle with passage Ø 94 mm max. speed 3,000 1/min Three-jaw chuck max. rotary Ø 552 mm max. turning length 1,192 mm Tailstock towed with hydr. Barrel Turret with 16 stations (all driven) Y-axis +80/-60 mm C-axis Conveyor High-pressure coolant pump 40 bar SBS Tool Breakage and Wear Monitoring Measuring probe, automatically swivelling Interface bar feeder SHW Autoblock Bezel List price 276.000,-
BIGLIA B56 S2M CNC lathe was built in 1998 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, distinguished by its high precision, reliability and repeatability, is an excellent choice for many industries, such as the automotive and aerospace industry. Workpieces with complex geometries are machined inside a large work space by means of two spindles and two turrets. This solution significantly speeds up production time and reduces machine downtime to a minimum. All this is complemented by the intelligent FANUC CNC control, which allows the creation of advanced machining programmes in just a few steps. The BIGLIA B.56/S2M CNC turning center weighs 6750 kg. Technical specifications of the BIGLIA B56 S2M lathe - CNC controller: GE FANUC Series 18i-T - maximum workpiece diameter: 560 mm - maximum workpiece length: 1000 mm - feed in the X/Z axis: 250/500 mm - number of spindles: ...
BIGLIA SMART TURN B1200 CNC automatic lathe was built in 2008 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, dedicated to the precise, multi-axis machining of workpieces with a maximum diameter of 580 mm, was created as an effective answer to the daily challenges of modern business. For this purpose, it features modern components with excellent technical characteristics inside a large work space, such as two spindles (main spindle and sub-spindle) and a 40-position tool magazine. The high-speed operation of the tool magazine further significantly speeds up production time and reduces machine downtime to a minimum. The SMART TURN B1200 S CNC turning center is offered with a wide range of equipment, including a bar feeder, Y-axis and FANUC intelligent CNC control. The total weight of the machine is 7000 kg. Technical specifications of the BIGLIA SMART TURN B1200 CNC lathe Gene ...
Turning length 1200 mm Turning Ø 700 mm Ø above the bed 700 mm Ø above transversing slide 600 mm Length between centers mm Type of CNC FANUC 18I-TB X-axis 255 mm Z-axis 160 mm Max workpiece weight kg Spindle taper ASA 8″ Spindle bore 95 mm Number of turrets 1 Number of tools on turret 12 Number of rotating tools 12 Turning speed 2800 rpm Spindle motor power 30 kW Tailstock no Bar feeder no ------------------- Length x width x height 5100.0 × 1985.0 × 2086.0 Weight 7000 kg
BIGLIA B658/B CNC turning center was built in 2009 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, designed for machining workpieces with a maximum diameter of 380 mm, offers excellent precision and repeatability of the produced parts. The machining process is performed inside a large workspace which includes, among others, a powerful spindle, a 12-position turret and an automatic tailstock. All parameters are, in turn, entered in an intuitive FANUC CNC control with many useful functions. The BIGLIA B 658/B CNC lathe weighs 5700 kg. Technical specifications of the BIGLIA B658/B lathe - CNC controller: FANUC Series 21i-TB - maximum turning diameter: 380 mm - maximum bar diameter: 80 mm - maximum passage: 620 mm - maximum turning length: 650 mm - feed in the X/Z/B axis: 220/650/660 mm - rapid traverse in the X/Z/B axis: 20/24/12 m/min - spindle rotational speed: 30-3000 ...
BIGLIA B658 CNC turning center was built in 2008 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, designed for precision machining of workpieces with a maximum diameter of 380 mm, has, among others, a 12-position turret, a reliable spindle and an automatic tailstock. All process parameters, in turn, are programmed in an intuitive FANUC CNC control with many useful functions that facilitate the daily operation of the machine. The BIGLIA B 658 CNC lathe weighs 6000 kg. Technical specifications of the BIGLIA B658 lathe - maximum turning diameter: 380 mm - maximum bar diameter: 80 mm - maximum passage: 620 mm - maximum turning length: 650 mm - feed in the X/Z/B axis: 220/650/660 mm - rapid traverse in the X/Z/B axis: 20/24/12 m/min - spindle rotational speed: 30-3000 rpm - spindle bore diameter: 90 mm - spindle centre height: 1055 mm - front bearing inner diameter: 130 mm ...
TURNING CENTER WITH 2 TURRETS, 2 SPINDLES AND INTEGRATED GANTRY LOADER Control Fanuc 31i - Model B Main and sub-spindle 2 turrets with 12 stations each (driven) Speed Tools 4,000 1/min 2x Y-axis 2x C-axis Travel: X= 170, Y= 90 (+50/-40), Z= 630 mm B-axis (sub-spindle 670 mm) max. turning diameter 200 mm max. turning length 350 mm Main / Counter Spindle Bar Passage 70 / 44 mm Speed main / sub-spindle 4,000 / 5,000 1/min Gantry loading system - Max. workpiece Ø 150 mm - Max. workpiece length 200 mm - Max. workpiece weight 5 kg Conveyor Bar Feeder IRCO Breuning MUK 10012 III
WE SELL AN STUNNING NICE CONDITION CNC BIGLIA WITH TOOLS AND ACCESSORIESS CONDITION IS AS ALMOST NEW. VERY LITLLE USED. FANUC SERIES 18-T Maximum turning diameter: 520 mm Maximum turning length: 500 mm Bar turning diameter: 80mm X axis travel: 210 + 5 Z axis travel: 500 + 10 Spindle speed: 4000 rpm Spindle motor: 11-15 Kw (50%) Spindle connection: ASA 6 Spindle hole: 80 mm Self-centering diameter: 250 mm Turret: number 12 stations Tailstock: CM 4 Dimensions: 3500 x 1670 x 1650 mm Weight: 4600 Kg HOLE TROUGH SPINDLE: 82 mm YEAR:1997
Bar lathe Biglia B436 Y2 :::TECHNICAL SPECIFICATIONS::: CNC Model: Mitsubishi CNC Version: M700 Main spindle nose: ASA 5 Main spindle power: 11Kw Main spindle bar passage: 36mm Turning diameter: 100mm Turning length: 100mm Main spindle speed: 7000 Number of tool turrets: 2 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 85mm Y-axis travel first turret: +25 -25mm Z-axis travel first turret: 300mm Number of second turret tool positions: 12 Number of motorized second turret: 12 Second turret X-axis travel: 85mm Second turret Y-axis travel: +25 -25mm Second turret Z-axis travel: 300mm Fast feed rates linear axes X Y Z: 15 15 30m/min High refrigerant pressure: yes Sub-spindle: yes Number of counter-spindle speeds: 7000 Counter spindle power: 11Kw ...
Biglia B650 Lathe ::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 21 tB Main spindle nose: ASA 6 Main spindle power: 20Kw Main Spindle Centering Diameter: 210mm Main spindle bar passage: 65mm Number of main spindle speeds: 4500 Turning diameter: 490mm Turning length: 670mm Number of tool turrets: 1 Number of fixed tool positions for the first turret: 12 First turret X-axis travel: 255mm First turret Z-axis travel: 670mm Fast feeds for linear axes X Y Z: 24m/min Tailstock: yes Positioning: Automatic Chip conveyor: belt Hand take-piece: yes Other technical data: B-axis in tailstock carriage stroke 660 :::D DIMENSIONS AND WEIGHT::: Length: 4450mm Width: 1900mm Height: 2100mm Weight: 6000Kg
turning 600 mm turning length 1200 mm number of tool changer stations 12 chip conveyor yes CNC control, brand, type GE Fanuc series 18i-TB electric connection 400 V dimension L 5200 mm dimension W 2000 mm dimension H 3000 mm
CNC controller: FANUC Series 18i-T Capacity X-axis travel mm: 210+5 Y-axis travel mm: 120 (+60 -60) Z-axis travel mm: 500+10 C-axis : CS (Direct)(min 0,001º) Turning length mm: 500 Max. turning diameter mm: ø 250 Upper turret X-axis travel mm: 210+5 Z-axis travel mm: 500+10 Tool holder: Number of tool slots St .: 12 Indexing time s: 0,4 Main spindle Speed spindle rpm: 30-3.500 Drive power spindle kW: 22-26(50%) Tailstock Tailstock travel mm: 100 Holder: MT4 Coolant system Tank capacity liter: 200 Equipment Chip conveyor Signal lamp various rigid tools Basic machine dimensions / weight Length mm: 4.000 Width mm: 1.965 Height mm: 2.100 Weight kg: 5.000
Motorized lathe BIGLIA B 1200Y :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 18i - TB Main spindle nose: ASA 8 Main spindle power: 26Kw Main spindle self-centering diameter: 315mm Main spindle bar clearance: 94mm Turning diameter: 400mm Turning length: 1200mm Number of Main Spindle Revolutions: 2800 Number of Tool Turrets: 1 Number of tool places before turret: 12 Number of motorized first turret: 12 X axis travel first turret: 255mm Y axis travel first turret: +60 -50mm Z axis travel first turret: 1315mm Rapid feeds linear axes X Y Z: 24m/min Tailstock: yes Chip evacuator: carpet Presetting: yes Self-centering bezel: yes Self-centering bezel make and model: Bezel wagon :::D IMENSIONS AND WEIGHT::: Length: 5100mm Width: 2130mm Height: 2100mm Weight: 6800Kg
WE SELL GREAT CONDITION BIGLIA EQUIPPED WITH COMPLETE TOOLS AND ACCESSORIES , BAR FEEDER LNS MACHINE HAS RUN ONLY 606 HOURS AND IT COMES WITH COMPLETE DOCUMENTATION AND ACCESSORIESS WE ORGANIZE DISMANTLING AND LOADING. FOR CUSTOMER WE CAN ORGANIZE AS WELL TRANSPORT .
Machine Details Stock-No. 1105-03755 Type of machine CNC Lathe - Inclined Bed Type Make BIGLIA Type B 501 MB Year of manufacture 2002 Type of control CNC Storage location HAGUENAU FRANCE Country of origin ITALY Delivery time by arrangement Freight basis At Place of the machine Price Technical details turning diameter 500 mm turning length 500 mm control FANUC 18 IT Spindle Bore: 60 mm turning speed range - spindle 5000 rpm Feed Range - Turret / Stepless 1 - 12000 mm/min Rapid Traverse 20 / 12 m/min tool taper direct recording total power requirement 20 kW Weight of the machine approx. 5 t dimensions of the machine approx. 4900x1800x1800 mm Additional information CNC FANUC 18 IT 3AXIS MACHINE
Machine Details Stock-No. 1105-03782 Type of machine CNC Lathe - Inclined Bed Type Make BIGLIA Type B 121 S CNC Year of manufacture 1989 Type of control CNC Storage location FRANCE Country of origin other Delivery time at once Freight basis free loaded Technical details turning diameter 520 mm turning length 420 mm control fanuc ot Spindle Bore: 45 mm turning speed range - spindle 4900 rpm Rapid traverse 20/12 m/min tool taper VDI 30 tail stock MK 4 total power requirement 20 kW weight of the machine approx. 3.5 t dimensions of the machine approx. 2900x1800x1800 mm Additional information WITH FANUC OT CONTROL Tailstock 3 Jaw Chuck Chuck Chip Convoyer
Machine Details Stock number 1105-03755 Machine type CNC lathe - inclined bed machine Brand BIGLIA Type B 501 M Year of construction 1997 Control type CNC Control FANUC OT Storage location FRANCE Country of origin ITALY Delivery time by arrangement Freight base from location Technical details Turning diameter 500 mm Turning length 500 mm Control FANUC OT Bar passage: 60 mm Speed range - spindle 5000 rpm Feed range - turret / infinitely variable 1 - 12000 mm/min Rapid traverses 20 / 12 m/min Number of tool turrets: 1 piece Tool turret - places: 12 stations Tool holder direct pick-up Total power requirement 20 kW Machine weight ca. 5 t Space requirement approx. 4900x1800x1800 mm Accessories Complete machine documentation YES Chip conveyor YES Information IMMEDIATELY FREE GOOD STRONG MACHINE 3 AXES CONTROLLED CONTROL FANUC OT WITH RIDING STICK WITH SPAENEF ...
Machine Details Stock number 1105-03732 Machine type CNC lathe - inclined bed machine Brand BIGLIA Type B 111 - S Year of construction 1995 Control type CNC Control Fanuc 0-T Storage location FRANCE Country of origin Taiwan Delivery time by arrangement Freight base from location Technical details Turning diameter 180 mm Turning length 280 mm Control Fanuc 0-T Rod passage: 42 mm Speed range - spindle 6000 rpm Feed range - turret / infinitely variable 1 - 12000 mm/min Rapid traverses 20 / 24 m/min Number of tool turrets: 1 piece Tool turret - places: 12 stations Tool holder direct pick-up Tailstock MK 3 Total power requirement 7.5 kW Machine weight ca. 3,2 t Space requirement approx. 2800x1700x1700 mm Accessories 3 - Baking - Lining Complete machine documentation Conveyor Parts catcher Collet device Electronic handwheel Coolant device Tool - Sett ...
CNC Model: Fanuc CNC version: 18i-T Main spindle nose: ASA 6 Main spindle power: 22Kw Main spindle self-centering diameter: 210mm Main spindle bar passage: 65mm Turning diameter: 250mm Turning length: 500mm Number of turns main spindle: 4000 Number of Tool Towers: 1 Number of tool places first turret: 12 Number of motorized first turret: 12 X axis travel first turret: 215mm Z axis travel first turret: 510mm Rapid linear axis feeds X Y Z: 24m/min Counter-spindle: yes Spindle nose: ASA 5 Number of spins: 4000 Power against spindle: 3,7Kw Bar passage: 43mm Z stroke counterspindle : 515mm Bar loader model and brand: Iemca Master 880 Chip evacuator: carpet operated Presetting: yes Number of motorized tool holders supplied: 4 :::D IMENSIONS AND WEIGHT::: Length: 4000mm Width: 1900mm Height: 1800mm Weight: ...
MAX DIAMETER OF ROD: 100 MM MAX CUTTING DIAMETER: 552 MM MAX TURNING LENGTH: 1.195 MM TURRET: 16 ROTATION SPEED: 2800 RPM CONTROL: FANUC 32 B INCLUDES: AUTOBLOK STEADY SLU-3.1 – ZS CAPACITY: 20-165 MM AUTOMATIC FEEDER FOR BARS BREUNING – MOD. MUK 10016-II
MAXIMUM ROTATING DIAMETER: 200 MM MAXIMUM TURNING LENGTH: 300 MM MAXIMUM TURNING DIAMETER: 160 MM BAR PASS: 41 MM COURSE ASSE X1: 175 MM COURSE ASSE X2: 132 MM COURSE ASSE Z1: 305 MM COURSE ASSE Z2: 155 MM QUICK X-Z AVANZAMENTS: 12 - 20 M/MIN MANDRINO: 100-5000 RPM; 11-15 KW; ASA 2-5 CONTROMANDRINO: 100-5000 RPM; 3.7-5.5 KW TOOL-HOLDER: 12 POSITIONS CONTROL: FANUC 18i-T WEIGHT: 4900 KG INGOMBRO: 3650 x 1940 x 1830 MM
YEAR: 1989 CNC: FANUC 0T TORNIBILE: 300 mm TURNBACK LENGTH: 300 mm MANDRINO: MANDRINO ATTACK: 6 ASA BARRA CAPACITY: 56 mm ROTATION SPEED: 3240 rpm POWER: 26 Kw AXIS C: 360 degrees I TORRETTA: PORTASSTATION STATIONS: 12 Nr. MOTORS: 6 Nr. MANDRINO: MANDRINO ATTACK: 6 ASA ROTATION SPEED: 3240 rpm. POWER: 26 Kw AXIS C: 360 degrees The TORRET: PORTASSTATION STATIONS: 12 Nr. RELATED: 6 nr
MAXIMUM SWITCHABLE LENGTH: 1520 MM MAXIMUM TROLLEY DIAMETER: 600 MM MAXIMUM SWITCHABLE DIAMETER: 540 MM AXLE STROKE X1:555 MM X2 AXIS STROKE: 185 MM Z-AXIS STROKE: 1595 MM STROKE Z2:1640 MM Y-AXIS STROKE: 160 (+-80) MM AXLE STROKE A: 1565 MM C1-C2 AXIS STROKE: 360 º (0.001) B-AXIS STROKE: 15-240 º (+-120) SPINDLE SPEED: 2800 RPM SPINDLE NOSE: ASA A2 # 8 CONTROL: FANUC 18I-TB COMPLETE WITH BEZEL SMW-AUTOBLOK
MAXIMUM SWITCHABLE LENGTH: 1520 MM MAXIMUM TROLLEY DIAMETER: 600 MM MAXIMUM SWITCHABLE DIAMETER: 540 MM AXLE STROKE X1:555 MM X2 AXIS STROKE: 185 MM Z-AXIS STROKE: 1595 MM STROKE Z2:1640 MM Y-AXIS STROKE: 160 (+-80) MM AXLE STROKE A: 1565 MM C1-C2 AXIS STROKE: 360 º (0.001) B-AXIS STROKE: 15-240 º (+-120) SPINDLE SPEED: 2800 RPM SPINDLE NOSE: ASA A2 # 8 CONTROL: FANUC 18I-TB COMPLETE WITH BEZEL SMW-AUTOBLOK
HORIZONTAL LATHE B1200 BIGLIA SWITCHABLE LENGTH 1200 MM TURNING DIAMETER 700 MM BAR STEP 80 MM SPINDLE POWER 30 KW NUMBER OF REVOLUTIONS/MIN 2800 Z-AXIS STROKE: 1200 MM Tailstock CHIP CONVEYOR HYDRAULIC BEZEL NUMBER OF TOOL POSTS 12 CONTROL: FANUC 21i-TB
This Biglia Smart Turn 1200 was manufactured in 2008. A robust horizontal turning machine with a bar capacity of 92 mm and a maximum machining diameter of 490 mm. It features a spindle bore of 111 mm and a chuck diameter of 315 mm, powered by a 30 kW motor. Ideal for handling substantial workpieces, the machine we have for sale weighs 7000 kg. For more information about this horizontal turning machine, please reach out to us.
This 8-axis Biglia B436 Y2 horizontal turning machine was manufactured in 2017. It features a robust 40 kW power output and a high-speed spindle capable of 7000 rpm. The machine offers a maximum bar turning diameter of 36 mm and a bar passage tube diameter of 37.5 mm. Its equipped with a Mitsubishi M730 VS-L CNC and a Biglia control panel. Ideal for precision machining, the Biglia B436 Y2 machine we have for sale. Contact us for further details regarding this horizontal turning machine.
This 4-axis Biglia B56 S2M was manufactured in 1998. A robust horizontal turning machine featuring a FANUC Series 18i-T control, spindle bore of 80 mm, and a turning speed of 4000 rpm. It includes a bar feeder IEMCA Kid 80, enhancing productivity. If you are looking to get high-quality turning capabilities consider the Biglia B56 S2M machine we have for sale. Contact us for more information.
