Key data: 1350 mm, 1 , 160 mm
Wide-belt sanding machine Bütfering Type VEGA 113 E Year of manufacture 1996 Working width 1350 mm Sanding belt width 1370 mm Workpiece thickness maximum 160 mm 1 grinding unit Combination unit with contact roller and segment sanding shoe With abrasive belt, grain size compensation and calibration device Automatic contact roller 85° Shore Electronically controlled link pressure beam Patented system CPS (see below) element width 50 mm Infinitely adjustable pressure on the workpiece edges 3-way pole-switchable drive motor 7.5/10/15 kW Sanding belt speeds 4.5/9/18 m/s Belt blow-off device Pneumatic abrasive belt tensioning device Feed speed 2.5-13 m/min Roller table at the infeed Roller table at the outlet Motorized height adjustment with digital display Cleaning brush 3 kW Total connected load approx. 20 kW CPS: (C)ompact-(P)ressure-(S)ystem Self-contained, m ...
Key data: 1350 mm, 1 , 150 mm
gebr. Wide belt sander (1-belt) BÜTFERING CLASSIC 113 C YOC 2001 only 816 h (read operating hours) Total connected load: 17 kW 1 power unit Drive motor: 15 kW Working width: 1,350 mm Sanding belt dimensions: 1,370 x 1,900 mm Workpiece thickness: 3 - 150 mm Electronic control (50 programs) Feed: 2.5 - 13 m/min. (infinitely adjustable) Combined contact roller-grinding shoe unit with abrasive belt grain compensation Steel contact roller (profiled) Electronically controlled link pressure beam (element width: 50 mm) Dust Removal Brush Roller table (infeed + outlet) Engine brake Extraction connection: 200 + 140 mm incl. thickness gauge (0-50 mm) Weight: approx. 2,000 kg Very good gebr. Condition! Few operating hours!
Key data: 1340 mm, 150 mm
SPECIFICATIONS: Machining width: 1340 mm Processing height: 150 mm Steel calibration roller: Ø 200 mm Sanding belt length: 2100 x 1400 mm Installed power: 17 kW
Bütfering Optimat SBO 109K Wide-belt calibration fine grinding machine Combination unit with contact roller and sanding pad Contact roller height-adjustable with grain compensation Working width 950 mm Control panel with LED thickness indicator Thickness adjustment and feed speed adjustable via multifunction lever on the control panel Motor power approx. 11 kW 2 feed speeds 4 /8 m / min. Machine is WORKSHOP overhauled in TOP CONDITION From stock Lieboch
PART NUMBER: 7506 Specifications: - max width of the workpiece 1350mm - max height of the workpiece 120mm - 3 units: -Pressure - I aggregate – grooved rubber roller for calibrating 15kW -Pressure - II unit with sequential boot 15kW - grooved rubber roller - grooved metal cylinder - rubber slip roller - III unit with sequential boot 11kW - 2 metal rollers - possibility of smooth change of feed speed - rubber roller, slip - IV aggregate - 2 cleaning rollers - rubber, slip, outfeed roller - blowing the belt - Pulling strap - pneumatic oscillation of tapes on photocells - electric lifting of the table top - smooth feed speed control 2.2kW - working pressure 6-10 bar - extraction spigot diameter 200mm, 4x210mm - total dimensions length/width/height 3200x2250x2450mm - weight about 4500kg, grinder adapted to vacuum pump Net price: 32900 PLN Net pri ...
Key data: 1100 mm, 1 , 150 mm
Combination grinding unit with contact roller and air grinding shoe Brush roller Abrasive belt tension, pneumatic motor strength adjustment Specifications: max. working width 1100 mm Max. workpiece thickness 150 mm Min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power grinding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0kW Operating pressure 6 bar Air pressure approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Cntaou7R Machine depth approx. 1700 mm Machine height approx. 1900 mm
SPECIFICATIONS: Machining width: 1350 mm Sanding belt width: 1370 mm Sanding belt length: 1900 mm Steel roller: Ø 150 mm Processing thickness: max. 150 mm Total installed power: 10 hp Variable speed drive: 0.75 hp Predisposition to depressor or aspirator COMPOSITION: 01 Calibration Roller + Buffer Roller Unit 01 Scotch brite aggregate
Bütfering Rival 416 RRTT - Wide-belt metal grinder - Control: Terminal TE 1-Metal - Thin sheet deburring (cold-rolled sheets) - Heavy sheet metal deburring (hot-rolled sheets) - Surface grinding - incl. manual - Year of construction 2004 Specification - Grinding width: 1650 mm - Working height: 920 mm - Workpiece thickness: 0.6 - 150 mm - Sanding belt width: 1670 mm - Sanding belt length: 2620 mm 1. Aggregate: - Sanding belt drive: 1 speed: 18.5 kW - Sanding belt speed: 18 m/s - Contact roller diameter: 220 mm 2. Aggregate: - Brush drive: 1 Speed: 11 kW - Brush speed: 9 m/s - Brush diameter disc/round brush: 150 / 200 mm - Motor oscillation: approx. 120 strokes/min - Stroke: 46 mm 4. Aggregate: - Brush drive: 1 Speed: 11 kW - Brush speed: 9 m/s - Brush diameter disc/round brush: 150 / 200 mm - Motor oscillation: approx. 120 strokes/min - Stroke: 46 mm Fe ...
Veneer press Fabr. Bütfering Slabs size 2.3 x 1.3 m Electric 4 cylinders diameter 120 mm Hydraulic with safety leash
Key data: 950 mm, 1 , 150 mm
- Combi grinding unit with calibration roller and sanding pad - Working width 950 mm - Sanding belt width max. 970 mm - Sanding belt length 1,700 mm - Workpiece thickness max. 150 mm - Feed speed 4 and 8 m/min - Motor power 7.5 kW - Feed motor 0.45/0.6 kW - Height adjustment 0.2 kW - Suction nozzle Ø 160 mm - Compressed air connection 6 bar - Air requirement approx. 10NL/min - Electrical connection: 380 V, 50 Hz, 20 A - Dimensions: approx. 1,775 x 1,570 x 1,830 mm - Weight approx. 1,000 kg Technical data subject to actual equipment
Key data: 1350 mm, 1
Broadband Calibration Fine Grinding Machine Contact roller unit 85 SH CPS Electronically Controlled Element Grinding Pad Working width 1350 mm PLC control for various work programs with LED display Motor power approx. 15 kW 2 feed speeds approx. 4 - 8 m/min. Blovfvxvsdy Motorized workpiece thickness adjustment with LED display RTE additional compact roller table in the infeed RTE additional compact roller table in the outlet Brush Cleaning Unit Machine WORKSHOP overhauled in TOP CONDITION
Key data: 1100 mm, 1
Wide belt sander model AWS 1100 combi working width 1100 mm brush unit year 88
Used long belt sander Int. Art. Ref. m3501 Manufacturer: Bütfering Type Table size approx. 2,400x800mm Location: 59425 Unna The machine is welcome to be visited. The machine is currently not energized ! A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and legal entities. ...
Butfering 800 Brushing Grinder TECHNICAL PARAMETERS: grinding width 800 mm Max. element height 100 mm ankle boots cleaning brush feed speed infinitely adjustable 5-45 m/min motor power 11 kW brush power 1.1 kW feed motor power 0.75 kW Pneumatic oscillation adjustment of the pressure of the boot Min. workpiece length 400 mm Four upper rubber pulling rollers table top height from the base 850 mm stub diameter 2 x 120 mm dimensions of the machine (length/width/height): 200 / 130 / 150 cm weight 700 kg
Key data: 1300 mm, 2 , 160 mm
Wide belt sander Bütfering SWT 525 QC Optimat Working width 1350 mm Number of aggregates 2 1. Transverse grinding unit with -Inside running felt ribbed tape - infinitely variable, frequency-controlled cutting speed 2 – 16 m/s. -an electromagnetic segment pressure bar for high tolerance compensation for fine and varnish sanding -Belt blow-off device, workpiece-controlled 2. 1 combined grinding unit with: • Automatic aggregate locking - infinitely variable, frequency-controlled cutting speed 2 – 18 m/s. -an automatically adjusting, profiled steel contact roller, with grain compensation for calibration -an electromagnetic segment pressure bar for high tolerance compensation for fine and varnish sanding -Grinding insert 110 mm wide • Co-rotating and counter-rotating device of the abrasive belt -Strip blow-off device, workpiece-controlled (one blowing rod each for co-r ...
Bütfering Optimat SCO 113 - Diamond + LACK CONSTANT TABLE MACHINE / autom. Head delivery Stable frame construction with a constant workpiece inrun height of 900 mm by adjusting the upper part of the machine. Workpiece thickness settings from 3 - 160 mm 1. Aggregate comb. Steel contact roller and electronically controlled segment sanding pad unit CPS II system with variable grinding pressure 2. Aggregate Cleaning - Brush Unit Stable vacuum table for a large surface Large transport securing by means of suction clamping device - high-performance blower with control flap integrated in the machine. Table segmentation that can be activated via the terminal Extendable workpiece support Working width 1350 mm additional table in the outlet - foldable Feed speed infinitely variable 2.5 - 13 m/min. LACQUER SANDING PACKAGE: Vacuum table with lacquered carpet and vacuum generator 3 kW I ...
Bütfering Wide belt sanding machine FBS 800 Product name: Wide belt grinding machine Type: FBS 800 Manufacturer: Gebrüder Bütfering Machine number: 83221 Year of construction: 1983 Condition: Used Technical details: - for solid wood - Grinding width: 800 mm - Strap width: 810 mm - Band length: 1,900 mm - Workpiece thickness: max. 90 mm - Feed speed: 10 and 20 m/min - Power requirement sanding belt drive: 15hp optional 20 hp - Feed drive: 1/1.5 hp - Cleaning brush: 0.75 hp - Weight: approx. 1,800 kg - Cleaning brush on the spout side (2x) - pneumatic belt tensioning Engine data: - Voltage: 380 V (note the direction of travel) - Current: A 2.8 / 22.4 - Power: 1.1 / 11.0 kW - Revolution: 1450 / U1=2,800, U2=3,060 Suction: - 3 x suction nozzles: diameter 140 mm, 160 mm, 200 mm Retrofitting/reassembly of a small table for acc ...
Wide belt sanding machine Bütfering Type: MA2W1100 Year of construction: 1983 Grinding width 1100 mm 2 grinding units Grinding roller motor power 15 kW and Sanding shoe motor power 15 kW With driven cleaning brush motor 0.55 kW Feed with 2 speeds 10 and 20m/min. Feed motor 1.8 kW Vacuum transport carpet complete with fan Constant table The complete machine upper frame is moved via four trapezoidal threaded spindles. Sanding belt width 1110 mm Sanding belt length 1900 mm Workpiece thickness maximum 150 mm Total connected load 35 kW Industrial version Suction connections 2 x 200 mm, 1 x 160 mm diameter Weight approx. 3.800 kg Dimensions 2500 mm x 1750 mm x H 2000 mm
Wide belt Sander Brand: Bütfering Model: AWS 3 Year of construction: 1989 Working width: 1350 mm 1 x Calibration roller 1 x Combi unit ( roller + grinding shoe ) 1 x Sanding shoe 1 x Cleaning brush Location of the machine: Customer location / Abroad
Technical data/equipment: - Working width 1350 mm, grinding from above, with 2 grinding units: Contact roller unit 15 kW with calibration device and height-adjustable contact roller 65° Shore Combined contact roller pressure shoe unit, drive power 11 kW, with higher adjustable contact roller 85° Shore and through the workpiece electr.pneum. controlled air cushion pressure shoe - Sanding belt dimensions W x L 1360 x 1,900 mm - Cleaning brush in the spout - Belt feed device, speed 3-15 m/min - Roller table in the inlet - Display of workpiece thickness - Air requirement machine control 60 NL/min - Suction nozzle Ø 3 x 200 mm - Extraction capacity 7,600 - 8,200 m³/h, Machine resistance 800 Pa - Total connection value 28 kW (380 V, 50 Hz) - autom. Star-triangle start-up - Braking device - pneum. Strip tension - optical airless belt control - pneum. spring-loaded centre ...
I sell a bottom grinding machine Butfering FBS2 1100, built in 1977. Konfigurazion Shoe - Shoe. Working width 1100mm. Total weight 4000kg. Suitable for line. Construction with fixed work table height.
Wide Belt Sander Manufacturer: Bütfering Model: FBS MA2W Built: 1983 Working width: 1100 mm Contact roller / calibration roller Sanding pad Cleaning brush Vacuum table
3-Breit-belt sander 1 roller rubberized 2. electron. Shoe with left and right rotation 3-step motor 3 electron. Shoe with infinitely variable belt speed programmiewrbares display 2-step feed Exhaust exhaust manifold Band blow-off device Vacuum carpet
Working width: 1.100 mm Number of sanding units: 2 st. Workpiece thickness max.: 150 mm sanding belt measurements: 1.110 x 1.900 mm Motor roller: 15 kW Motor pad: 11 kW Feed motor: 1,5 kW Feed speed: 3 - 15 m/min. Overall size: 1.750 x 2.210 x 2.280 mm Weight: ca. 3.300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Bütfering AWS, Type: AWS 1100, Year: 1981, Monting of the machine: Kombiaggregat, Sanding width mm: 1100, Sanding hight mm: 120, Sanding belt dimensions: 1900 X 1150, Längsschleifaggregate: Kombi/Bürste, Band 1 Leistung kW : ca.10, Combi unit roller/shoe: yes, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: 0,5, Constant table hight: no, Year :1981
Manufacturer: Bütfering, Type: Vega 213 CE, Year: ca.1995, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: ca.2120 X 1350, Table hight adjustment by engine: yes, Rollers: 1, Rubber roller: yes, Band 1 Leistung kW : 12 gleich und gegenlauf, Band 2 Kombiaggregat Walze/Schuh: 15, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 6-20, Feeding engine kw: 1,2, Intermediate sanding of lacquer: no, Vacuum table: yes, Segment sanding shoe: yes, Bürstaggregat : yes, Durchmesser/ Bürstenbesatz: 125, Year :ca.1995
Manufacturer: Bütfering, Type: Profiline SCR/RRR, Year: 2007, Sanding width mm: 1350, Sanding hight mm: 3-160, Number of sanding belts: 3, Sanding belt dimensions: 13702620, Rollers: 3, Rubber roller: 1, Steel roller: 2, Shore roller 1: 70 , Bürstenaggregate: 1, Band 1 Leistung kW : 37, Band 2 Leistung kW : 30 , Band 3 Leistung kW : 22, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 7, Constant table hight: yes, Vacuum table: yes, Weight in kg: ca. 2020, Year :2007
Manufacturer: Bütfering, Type: Vega 213 CE, Year: ca.1995, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: ca.2120 X 1350, Table hight adjustment by engine: yes, Rollers: 1, Rubber roller: yes, Band 1 Leistung kW : 12 gleich und gegenlauf, Band 2 Kombiaggregat Walze/Schuh: 15, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 6-20, Feeding engine kw: 1,2, Intermediate sanding of lacquer: no, Vacuum table: yes, Segment sanding shoe: yes, Bürstaggregat : yes, Durchmesser/ Bürstenbesatz: 125, Year :ca.1995
Manufacturer: Bütfering, Type: AWS 2CE 1100, Year: 1992, Monting of the machine: Walze / Schuh, Sanding width mm: 1100, Sanding hight mm: 150, Number of sanding belts: 2, Sanding belt dimensions: 1110 x 1900, Steel roller: yes, Band 1 Leistung kW : 15, Band 1 Schleifbandgeschwindigkeit m/s : 5 / 10, Band 2 Schuhaggregat: 11, Band 2 Schleifbandgeschwindigkeit m/s : 5 / 10, Band 2 Gleich und Gegenlauf: yes, Frequency control of belts: no, Transportbandantrieb kW: 1,5, Intermediate sanding of lacquer: no, Constant table hight: yes, Vacuum table: no, Noise enclosure: yes, Brushing unit: 0,55 kW, Weight in kg: 3300, Year :1992
Manufacturer: Bütfering AWS, Type: AWS 1100, Year: 1981, Monting of the machine: Kombiaggregat, Sanding width mm: 1100, Sanding hight mm: 120, Sanding belt dimensions: 1900 X 1150, Längsschleifaggregate: Kombi/Bürste, Band 1 Leistung kW : ca.10, Combi unit roller/shoe: yes, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: 0,5, Constant table hight: no, Year :1981
