Multi-Blade Saw Costa Leopard S Year: 1981 Cutting height 220mm 2x75hp new conveyor belt, replaced in 2015 Width chain: 370mm Cross conveyor 5 strands
SPECIFICATIONS: Processing width: max. 1400 mm 2 adjustable speeds Motor 1: 30 kW Motor 2: 22 kW COMPOSITION: Group I: Steel roller Ø 400 mm Group II: 2 steel rollers of Ø 130 mm each
SPECIFICATIONS: Sanding belt size: 1380 x 2620 mm Max. working height: 160 mm Diameter of the rollers: 250 mm 3 independent motors total KW 36.0 Electronic Band Oscillation Front and rear support rollers Speed variator Pneumatic Shoes Hardness of the rubber rollers Reel I: 90 sh Reel II: 75 sh III Reel: 55 sh
Heavy Duty Calibrating Sander with Fixed Table Key Features: Sanding Width: 1350 mm Workpiece Thickness: 3 to 160 mm (optional up to 220 mm) Feed Rate: Calibrating Sanding Machines: 3 to 15 m/min Sanding Machines: 4 to 20 m/min Standard Equipment: Machine Control: Costa Levigatrici Standard Special Equipment Options: Contact Roller Setting: Electronically with GSE Electric Grit Kit Pneumatically with GSP Pneumatic Grit Kit Segmental Pressure Pad: Costa Levigatrici TP 16 or TP 32 in the combined unit, replacing the air cushion shoe Additional Features: Contact-Free Sanding Belt Control Oscillating Sanding Belt Blow-Off Device Up to 2 Brushing Units Feed Table Vacuum Table Floating Supported (Floating Feed Table) Automatic Workpiece Thickness Adjustment Machine Control Options: Costa Levigatrici START Costa Levigatrici PCM For more information or to request a quot ...
CATALOG NO. 6911 TECHNICAL SPECIFICATIONS - track width 350mm - shaft width 370mm - max cutting height 200mm max dial diameter: - on the upper shaft 340mm - on the bottom shaft 300mm - disc bore diameter 80mm in advance: - repellers - 2 pressure sliding shafts -Pressure - shaft with saws 37kW - 2 smooth sliding shafts from below: - introductory table + guide strip - repellers -caterpillar - shaft with saws 37kW -caterpillar - 1 output shaft, slip, smooth - pneumatically pressed rollers - max disc diameter 300mm - electric lifting of the upper body up / down 1,1kW - automatic central lubrication - electrically adjustable smooth regulation of the feed speed 3kW - diameter of extraction connection 230mm, 250mm - dimensions length / width / height 3000x2300x1900mm - weight about 5000kg ADVANTAGES – Italian production – two-shaft – used multi-saw, very good condition Net price: 19890 ...
SECOND-HAND WIDE BELT SANDER COSTA MOD. 60 CC/2 1150 - CE RULES - Working width 1150 -Volt. 380/50 - S/N 951121/DR3 - Year 1996
Catalog No. 6809 TECHNICAL DATA - track width 350mm - roller width 370mm - max cutting height 200mm - max disc diameter 300mm - disc hole diameter 80mm in advance: - repellants - pressing sliding shaft - repellants - 2 smooth sliding shafts - repellants - shaft with saws 75kW - 3 smooth sliding shafts - repellants - smooth sliding shaft from down: - sliding roller - repellants - caterpillar - shaft with saws 95kW - caterpillar - 1 output shaft, toothed, pulling - rollers pressed pneumatically - max disc diameter 300mm - electric lifting of the upper body up/down 1.1 kW - automatic central lubrication - smooth adjustment of the feed speed 3kW - diameter of the exhaust connection 190mm, 200mm - feeding table with guide and pneumatic clamp rolls in the feeder: - 1 sliding, 9 pulling - dimensions of the feeder length / width / height 6520x1300x1050mm - dim ...
– Italian production – year of manufacture 1991 TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 45 and 45 kW engines feed motor 3 kW height adjustment motor 1,1 kW disc diameter max. 300 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm track width 350 mm total power 94 kW feed adjustment on the inverter automatic central lubrication minimum element length 600 mm electric height adjustment electric shaft height adjustment four upper pressure rollers pneumatic clamps five anti-ejection latches shaft position indicator connection diameter 2 x 220 mm spindle speed 4500 RPM dimensions of the machine (L/W/H) 240 / 235 / 210 cm weight ~ 6000 kg
Grinding and calibration line COSTA Levigatrici CCT CCT 1150 Technical specifications: Max workpiece width, mm: 1150 Max thickness of the workpiece, mm: 120 Feed rate, m / min: 5-20 Overall dimensions, mm: 5000х3000х2800 Power, kW: 139 Weight, kg: 11000 Machine for bottom grinding : Working unit 1. Contact roller diameter 250mm, Working unit 2. Contact roller diameter 250mm, Working unit 3. Sanding shoe, Machine for top grinding : Working unit 1. Contact roller diameter 250mm, Working unit 2. Contact roller diameter 250mm, Working unit 3. Sanding shoe,
SPECIFICATIONS: Grinding/calibration line Editing: from above and below 2 motors with 18.5 KW each Cardan drive Sanding belt dimensions mm: 2,620 x 1,180 Vacuum carpet
This Costa M36 CC1150 belt sander was manufactured in 2008. Ideal for smoothing and finishing surfaces, it offers reliable performance for your sanding needs. Contact us for more information.
Manufacturer: Costa, Type: Lince, Year: 1999, Cutting widht mm: 300, Power engine kW: 58, Year :1999
Manufacturer: Costa, Year: 1999, Foil stations: yes, Shrinking tunnel mm: 1700, Year :1999
Manufacturer: Costa, Type: SbF , Year: 1999, Sanding width mm: 1350, Sanding hight mm: 3-150, Number of sanding belts: 1, Rubber roller: yes, Band 1 Leistung kW : 15, Transportbandantrieb kW: 1,1, Brushing unit: yes, Year :1999
Manufacturer: Costa, Type: Strettoio, Year: 1999, Work piece width min-max mm: 180, Min.-max. workpiece length in mm: 2200, Stages: 5, Year :1999
Manufacturer: Costa Lackschleifmaschine, Type: C 1350, Year: 1999, Control: Costa, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Rubber roller: yes, Shore roller 1: 40, Band 1 Leistung kW : 36, Band 1 Schleifbandgeschwindigkeit m/s : ca.5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Noise enclosure: yes, Workpiece emitting device nozzles: yes, Year :1999
Manufacturer: Costa Inert Trocknung, Type: C X C 1350, Year: 2011, Work piece width min-max mm: 50-1350, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 10, Gesamtlänge UV Modul mm: 1300, Lamps straight installation: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Position of lamps: gerade, Power per lamp watt UV: 60-120, Feeding speed m/min: 5-20, Conveyor: Band, Exhaust air diameter mm: yes, Feedin speed m/min: 6-25, Belt conveyor: yes, Year :2011
Manufacturer: Costa Giardina Tomanin, Type: Hochglanzlackierstrasse, Finished product: Hochglanz und Glaslackierung, Work piece width min-max mm: 150-1300, Min.-max. workpiece height in mm: 3-80, Min.-max. workpiece length in mm: 150-2800, Feeding speed min-max m/min: ca.10, Inlet conveyor: yes, 2 paint roller: 2 Stück Tomanin Lackwalze, 2 UV dryer lamps/Watt: 1 Lampen Giardina 80 Watt, 3 UV dryer lamps/Watt: 2 Lampen UV<CRLF>Giardina 80-120 Watt, Sanding machine: Costa Lackschleifmaschine Quer/längs, Available: sofort,
Manufacturer: Costa, Type: T 1350, Year: 1998, Monting of the machine: schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 1, Sanding belt dimensions: 3250 X 1350, Längsschleifaggregate: ca.17, Bürstenaggregate: yes, Band 2 Kombiaggregat Walze/Schuh: 10-20, Belt 4 pressure segment belt: yes, Belt 4 synchronous and reverse run: 32, Elektronische Tastung mm: yes, Table hight adjustment by engine: ca.1,5, Transportbandantrieb kW: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Year :1998
Manufacturer: Costa, Type: KA CCC 1350, Year: 2003, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 1350 X 2620, Rollers: 3, Längsschleifaggregate: 3, Bürstenaggregate: 1, Steel roller: 2+1 Gummi, Bürstenaggregate: 1, Band 1 Leistung kW : ca.20, Band 2 Leistung kW : ca.20, Band 3 Leistung kW : ca.20, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 2,2, Constant table hight: yes, Brushing unit: yes, Year :2003
Manufacturer: Costa Breitbandschleifmaschine, Type: CCT/1350, Year: 1995, Monting of the machine: Stahlwalze/Gummiwalze/Schuh, Sanding width mm: 1350, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Steel roller: yes, Band 1 Leistung kW : ca.30, Band 2 Leistung kW : ca.30, Band 3 Leistung kW : 17, Continous adjustable feeding speed m/min: 10-25, Transportbandantrieb kW: ca.3, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, Weight in kg: ca.8000, Year :1995
Manufacturer: Costa, Type: Nastro, Year: 1999, Length mm: 2300, Working widht mm: 400, Drive power kW: 0,3, Year :1999
- Producer Costa - Working width 1.300 mm - Year of construction 2003 - Working height ~ 850 - 950 mm - 1. Unit - Spindle with brush head, D 180 mm - grain size P180 - Driving speed infinitely adjustable U/min - Motor power 0,75 kW - Spannungsschwankungen max. +/- 5 %
Manufacturer: Costa, Type: KA CCC 1350, Year: 2003, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 1350 X 2620, Rollers: 3, Längsschleifaggregate: 3, Bürstenaggregate: 1, Steel roller: 2+1 Gummi, Bürstenaggregate: 1, Band 1 Leistung kW : ca.20, Band 2 Leistung kW : ca.20, Band 3 Leistung kW : ca.20, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 2,2, Constant table hight: yes, Brushing unit: yes, Year :2003
- Producer Costa - Working width 1.300 mm - Year of construction 2003 - Working height ~ 850 - 950 mm - 1. Unit - Spindle with brush head, D 180 mm - grain size P180 - Driving speed infinitely adjustable U/min - Motor power 0,75 kW - Spannungsschwankungen max. +/- 5 %
Manufacturer: Costa Inert Trocknung, Type: C X C 1350, Year: 2011, Work piece width min-max mm: 50-1350, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 10, Gesamtlänge UV Modul mm: 1300, Lamps straight installation: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Position of lamps: gerade, Power per lamp watt UV: 60-120, Feeding speed m/min: 5-20, Conveyor: Band, Exhaust air diameter mm: yes, Feedin speed m/min: 6-25, Belt conveyor: yes, Year :2011
Manufacturer: Costa Giardina Tomanin, Type: Hochglanzlackierstrasse, Finished product: Hochglanz und Glaslackierung, Work piece width min-max mm: 150-1300, Min.-max. workpiece height in mm: 3-80, Min.-max. workpiece length in mm: 150-2800, Feeding speed min-max m/min: ca.10, Inlet conveyor: yes, 2 paint roller: 2 Stück Tomanin Lackwalze, 2 UV dryer lamps/Watt: 1 Lampen Giardina 80 Watt, 3 UV dryer lamps/Watt: 2 Lampen UV<CRLF>Giardina 80-120 Watt, Sanding machine: Costa Lackschleifmaschine Quer/längs, Available: sofort,
Manufacturer: Costa Breitbandschleifmaschine, Type: CCT/1350, Year: 1995, Monting of the machine: Stahlwalze/Gummiwalze/Schuh, Sanding width mm: 1350, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Steel roller: yes, Band 1 Leistung kW : ca.30, Band 2 Leistung kW : ca.30, Band 3 Leistung kW : 17, Continous adjustable feeding speed m/min: 10-25, Transportbandantrieb kW: ca.3, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, Weight in kg: ca.8000, Year :1995
Manufacturer: Costa Lackschleifmaschine, Type: C 1350, Year: 1999, Control: Costa, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Rubber roller: yes, Shore roller 1: 40, Band 1 Leistung kW : 36, Band 1 Schleifbandgeschwindigkeit m/s : ca.5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Noise enclosure: yes, Workpiece emitting device nozzles: yes, Year :1999
Manufacturer: Costa Kalibrieranlage, Type: KA CC 1350, Year: 2007, Control: Siemens/KEB, Monting of the machine: 2x Stahlwalze geriffelt, Sanding width mm: 1350, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: 2620 X 1380, Table hight adjustment by engine: yes, Steel roller: 2, Längsschleifaggregate: 30, Belt 2 shoe unit: 22, Band 2 Schrägstellbar Grad : no, Band 2 Innenliegendes Drucklamellenband : nur Gegenlauf, Table hight adjustment by engine: yes, Elektronische Tastung mm: 8-20, Separation of sampling in mm: 2,2, Table hight adjustment by engine: variabel, Continous adjustable feeding speed m/min: yes, Constant table hight: no, Brushing unit: yes, Werkstück-Abstrahleinrichtung: 3400, Diameter/ brush bristles: yes, wast cleaning: Pneumatische Absaugvorrichtung dabei, Oszilation dabei, Year :2007
