Model
(Manufacturer: DEMAG ERGOTECH)
Screw diameter; 80 mm Injectable volume / Shot volume: 1779 cm3 Injection pressure : 2423 bar Column passage /Bettween tie bar: 1000 x 900 mm Mould tickness thickness : 450 mm - max: 950 mm Opening stroke: 930 mm Core Pulling: 3 Robot interface: yes / Yes E67 Options:
Demag Ergotech Extra 200-600 Plastic Injection Moulding Machine Type: Extra 200-600 Model: 2006 The machine is in a neat original condition. The complete detailed documentation is available. Viewing can be done at short notice. We will be happy to answer any further questions you may have. Tel. +4917621834834
Key data: 500 kN
Demag Ergotech Compact 500-120 / machine in very good technical condition Year of construction: 1993 Injection unit: Screw diameter: 25 mm Spray weight: 54 g Spray pressure: 2000 bar Dosing volume: 61.3 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 1 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 5.1 kW Total power: 20.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live ...
Key data: 800 kN
Demag Ergotech System 80/420-430 Year of construction: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Dosing volume: 231 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Size of clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Euromap 67 Robot Interface Air valve x 2 Hydraulic Core Pull x 3 Control with hot runners Injection unit hardened - Bimetal Built-in printer It is possible to change the screw diameter Metrics: Weight: 4100 kg Length/Width/Height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 800 kN
Demag Ergotech Compact 800/420-200 Year of construction: 2000 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 400x400 mm Size of clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine was not in use in an ongoing production. This was only used to test the tools It is possible to change the screw diameter Metrics: Weight: 4000 kg Length/Width/Height: 3.90x1.40x1.90 m Drive: Pumps/motor: 18.5 kW Heating capacity: 7.5 kW Total power: 26 kW All offered machines are started by our service technicians before they are sold. It is possible to ...
Key data: 1100 kN
Demag Ergotech Multi 1100-310H/80V / Production line with the Wittmann-Demag W721 robot / Very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 195 g Spray pressure: 1550 bar Dosing volume: 219.8 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Production line with turntable, Wittmann-Demag W721 robot, conveyor belt and protective housing 2K Machine Air Valve x 4 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 22 mm Parallel Movements Original turntable Robot Wittmann-Demag W721 Year of construction: 2007 4-axis robots: 4 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1 ...
Clamping force: 35 t Year of construction: 2006 Injection weight in PS: 30 g Control Type: NC4 Injection unit: .../80 Screw diameter: 22 mm Spec. Injection pressure: 2061 bar Spray volume: 34.2 cc Injection weight in PS: 30 g Hydr. Drive power: 7.5 kW Cylinder heating capacity: 5.1 kW Clamping unit: 350/... Clamping force:: 35 t Size of clamping plates: 460 x 450 mm Lights spar spacing: 280 x 280 mm Aperture travel: 350 mm Max. plate spacing: 530 mm Ejector travel: 100 mm General information: Delivery Time: Natychmiast Weight: 2750 kg Dimensions(m) LxWxH: 3.2 x 1.2 x 2.0 m Equipment Filling funnel Sorting flap bimetallic plasticizing structure hydraulic core on movable plate
Key data: 100000 kN, 149 g/PS, 35 mm
Clamping force: 100 t Year of construction: 2001 Injection weight in PS: 149 g Control Type: NC4 Injection unit: .../310 Screw diameter: 35 mm Spec. Injection pressure: 2020 bar Spray volume: 168.3 cc Injection weight in PS: 149 g Hydr. Drive power: 18.5 kW Cylinder heating capacity: 9.4 kW L/D screw ratio: 20 Clamping unit: 100/... Clamping force:: 100 t Size of clamping plates: 600 x 600 mm Lights spar spacing: 420 x 420 mm Ejector force: 41.2 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 150 mm General information: Fuel tank capacity OIL: 220 l Weight: 4800 kg Dimensions(m) LxWxH: 4.3 x 1.4 x 2.0 m Equipment: 1 x Hydraulic Core 1 x Pneumatic Valve
Screw diameter; 95 mm Injectable volume: 3360cm3 Injection pressure: 1895 bar Column width: 1000 x 900 mm Minimum mould thickness: 40 mm max: 950 mm Aperture stroke: 930 mm Cores: 4 Robot Interface: Yes Options: Retractable Column - Electric Dosing Motor 24 Zones Mold Heater Magnetic trays 8-point sequential injection Blow guns: 2 3-axis robot
Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column
Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650.5200 Model 2001 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot
Molding machine of Mag Type: Ergotech 1300-12000 system, with rice robot control: NC4 year: 1996 Clamping unit Clamping force t: 1300 opening stroke mm: 1500 Holm dimension mm: 1500 x 1250 min/max height mm: 700/1400 Plate size: 2150 x 1880 injection unit Screw diameter mm: 130 injection weight gr: 6060 Injection volume cm 3: 6730 spray pressure bar: 1799 Dimensions and weights Dimensions Lxwxh m: 14.1 x 3.2 x 2.7 machine weight kg: 60,000/20,000 Miscellaneous Nuclear trains with rice robot EUROMAP 12
Molding machine of Mag Type: Ergotech 3500-3300, control panel: NC4 year: 2002 Clamping unit Clamping force t: 350 gap mm: 930 Holm dimension mm: 1250 x 1250 min/max height mm: 600-1200 Injection unit Screw diameter mm: 95 injection weight gr: 2260 Injection volume cm 3: 2509 spray pressure bar: 1316 Dimensions and weights Dimensions Lxwxh m: 5.8 x 3.1 x 2.65 machine weight kg: 34,000/7,000 Miscellaneous Europe 63 4 core cascade system PDF FILE PRINTING CONTACT
Molding machine of Mag Type: Ergotech 100-430 system control: NC 4 year of construction: 1999 Clamping unit Clamping force t 100 gap mm: 500 Holm dimension mm: 400 x 400 min/max height mm: 250 / 750 Plate size: 590 x 590 injection unit Screw diameter mm: Gr 40 injection weight: 205 Injection volume cm 3: 231 spray pressure bar: 2020 Dimensions and weights Dimensions Lxwxh m: 4.4 x 1.4 x 1.8 machine weight kg: 4400 Miscellaneous EUROMAP pull 12, 1 core
Molding machine of Mag Type: Ergotech 250-1450 system control: NC 4 year of construction: 1996 Clamping unit Clamping force t Gap between 250 mm: 575 Holm dimension mm: 560 x 560 min/max height mm: 660 / 760 Plate size: 830 x 830 injection unit Screw diameter mm: Gr 70 injection weight: 940 Injection volume cm 3: 1039 spray pressure bar: 1400 Dimensions and weights Dimensions Lxwxh m: 5.7 x 1.7 x 2.2 machine weight kg: 11200 Miscellaneous 2 core EUROMAP 12
Molding machine of Mag Type: Ergotech 420/800-3300 system control: NC 4 year: 2000 Clamping unit Clamping force t 420 gap mm: 710 Holm dimension mm: 810 x 710 min/max height mm: 820 / 940 Plate size: 1200 x 1100 injection unit Screw diameter mm: Gr 80 injection weight: 1600 Injection volume cm 3: 1779 spray pressure bar: 1855 Dimensions and weights Dimensions Lxwxh m: 7.8 x 2.2 x 2.4 machine weight kg: 21000 Miscellaneous 4 core EUROMAP 12
