DEMAG ERGOTECH EXTRA 80-430 injection moulding machine was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and sizes, using the injection moulding method. This method involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, guarantee high repeatability of the manufactured parts. The DEMAG ERGOTECH 80-430 EXTRA injection moulding machine weighs 3600 kg. Technical specifications of the DEMAG ERGOTECH EXTRA 80-430 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 40 mm - screw length/diameter ratio: 20 L/D - maximum injectio ...
used
Key data: 35000 mm, 30 , 22
Demag Ergotech Concept 35/280 – 80 Clamping force: 35t Year of Make: 2006 Injection weight in hp: 30g Injection Unit Injection Unit: .../80 Screw diameter: 22 mm Spec. Spray pressure: 2061 bar Injection volume: 34.2 cc Injection weight in hp: 30 g Hydr. Drive power: 7.5 kW Cylinder heating capacity: 5.1 kW Clamping unit 350/... Clamping force: 35 t Size of the clamping plates: 460 x 450 mm Lights spar spacing: 280 x 280 mm Opening travel: 350 mm Max. plate spacing: 530 mm Ejector travel: 100 mm Weight: 2750 kg Dimensions(m) LxWxH: 3.2 x 1.2 x 2.0 m equipment -Filling funnel -Sorting flap -Bimetal plasticizing construction -Hydraulic core on movable plate
used
Key data: 35000 mm, 30 , 22
Demag Ergotech Concept 35/280 – 80 Clamping force: 35t Year of Make: 2006 Injection weight in hp: 30g Injection Unit Injection Unit: .../80 Screw diameter: 22 mm Spec. Spray pressure: 2061 bar Injection volume: 34.2 cc Injection weight in hp: 30 g Hydr. Drive power: 7.5 kW Cylinder heating capacity: 5.1 kW Clamping unit 350/... Clamping force: 35 t Size of the clamping plates: 460 x 450 mm Lights spar spacing: 280 x 280 mm Opening travel: 350 mm Max. plate spacing: 530 mm Ejector travel: 100 mm Weight: 2750 kg Dimensions(m) LxWxH: 3.2 x 1.2 x 2.0 m equipment -Filling funnel -Sorting flap -Bimetal plasticizing construction -Hydraulic core on movable plate
Spare parts for injection molding machines Spare parts electric Demag Demag Sigmatek DKL 022 KD. 06792862 Demag Dias DTO 163 KD. 06792165 Demag Sigmatek DKL 012 KD. 06792865 Demag Dias DAO 041 KD. 06796265 Demag Dias DEC 181 KD. 06792665 Demag Sigmatek DKL 025 KD. 06793265 Demag Dias DAM 122 KD. 06792265 Demag Dias DDM 163 KD. 06792365 Demag Sigmatek DKL 013 KD. 06793065 Demag Dias DDM 164 KD. 06792465 Demag Dias DM 321 KD. 06014866 Demag Dias AO 041 KD. 06001466 Demag Dias AI 281 KD. 06001166 Demag Dias TO 323 KD. 06013666 Demag Dias DI 32W KD.06715565 Demag Dias PS 242 KD. 06029066 Demag Dias CP 126 KD. 06730365 Demag Dias AI 381 KD. 06013466 Demag Slides AO 081 KD. 06015066 Demag Dias DCP 642 KD. 06791765 Demag Sigmatek DKL 002 KD. 06111966 Demag Dias DAM 124 KD. 07024865 Demag Dias DDM 163 00733445 Demag Dias DEC 161 KD. 00703303 Demag Dias DAI 883 KD. 06 ...
DEMAG ERGOTECH VIVA 800-400 injection moulding machine was built in 2001 in Germany by Demag Kunstofftechnik (currently Sumitomo (SHI) Demag Plastics Machinery GmbH). This highly efficient machine is used for the economic production of plastic parts of different colours, shapes and sizes. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, ensure high repeatability of the manufactured products. The DEMAG injection moulding machine weighs 3750 kg. Technical specifications of the DEMAG ERGOTECH VIVA 800-400 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum injection weight PS: 157 ...
Lifting capacity: 3.2 ton Lifting height: 330 cm Arm length: 600 cm Equipped with: - Electric trolley driving - Main and fine stroke - Electric turning
Lifting capacity: 3.2 ton Lifting height: 330 cm Arm length: 600 cm Equipped with: - Electric trolley driving - Main and fine stroke - Electric turning
used
Key data: 35000 mm, 30 , 22
Demag Ergotech Concept 35/280 – 80 Clamping force: 35t Year of Make: 2006 Injection weight in hp: 30g Injection Unit Injection Unit: .../80 Screw diameter: 22 mm Spec. Spray pressure: 2061 bar Injection volume: 34.2 cc Injection weight in hp: 30 g Hydr. Drive power: 7.5 kW Cylinder heating capacity: 5.1 kW Clamping unit 350/... Clamping force: 35 t Size of the clamping plates: 460 x 450 mm Lights spar spacing: 280 x 280 mm Opening travel: 350 mm Max. plate spacing: 530 mm Ejector travel: 100 mm Weight: 2750 kg Dimensions(m) LxWxH: 3.2 x 1.2 x 2.0 m equipment -Filling funnel -Sorting flap -Bimetal plasticizing construction -Hydraulic core on movable plate
used
Key data: 35000 mm, 30 , 22
Demag Ergotech Concept 35/280 – 80 Clamping force: 35t Year of Make: 2006 Injection weight in hp: 30g Injection Unit Injection Unit: .../80 Screw diameter: 22 mm Spec. Spray pressure: 2061 bar Injection volume: 34.2 cc Injection weight in hp: 30 g Hydr. Drive power: 7.5 kW Cylinder heating capacity: 5.1 kW Clamping unit 350/... Clamping force: 35 t Size of the clamping plates: 460 x 450 mm Lights spar spacing: 280 x 280 mm Opening travel: 350 mm Max. plate spacing: 530 mm Ejector travel: 100 mm Weight: 2750 kg Dimensions(m) LxWxH: 3.2 x 1.2 x 2.0 m equipment -Filling funnel -Sorting flap -Bimetal plasticizing construction -Hydraulic core on movable plate
Pillar slewing crane Hook height approx. 3.5m Radius approx. 4m Lifting capacity 500kg Test book available Crane already dismantled and ready for loading Special price
used
Key data: 35000 mm, 30 , 22
Demag Ergotech Concept 35/280 – 80 Clamping force: 35t Year of Make: 2006 Injection weight in hp: 30g Injection Unit Injection Unit: .../80 Screw diameter: 22 mm Spec. Spray pressure: 2061 bar Injection volume: 34.2 cc Injection weight in hp: 30 g Hydr. Drive power: 7.5 kW Cylinder heating capacity: 5.1 kW Clamping unit 350/... Clamping force: 35 t Size of the clamping plates: 460 x 450 mm Lights spar spacing: 280 x 280 mm Opening travel: 350 mm Max. plate spacing: 530 mm Ejector travel: 100 mm Weight: 2750 kg Dimensions(m) LxWxH: 3.2 x 1.2 x 2.0 m equipment -Filling funnel -Sorting flap -Bimetal plasticizing construction -Hydraulic core on movable plate
Single-girder overhead crane Manufacturer: Demag Lifting capacity 8to Average track approx. 19.5m Lifting height min 6m With built-in crane scale / lifting weighing device. Hoist runs on the side of the beam so that the crane hook can be lifted to the lower edge of the beam. Crane system has already been dismantled. Optionally with approx. 2 x 50m crane rails.
ID3448 Demag 3160 – Challanger year/Baujahr 2012 6900 hours/hours, 118.000 km 50 m mast, crane completely overhauled 50 m mast, crane completely overhauled
Wall Sway Crane, Demag, 125kg– used - : Price ex location: 1.750.-€ (net)! Manufacturer: Demag Manufacturer chain hoist: Demag Type: unknown or will be submitted later Year of manufacture: unknown or will be submitted later Payload: 125kg Length of the boom must be submitted later Condition: good Available: from approx. Mid-January to mid-February 2ß25 Location: Munich. Later Frankenberg camp
Column swaying crane, Demag / J.D. Neuhaus, 125kg with pneumatic chain hoist – used - : Price from location: 1.500.-€ (net)! Manufacturer: Demag Manufacturer chain hoist: J.D. Neuhaus Type: unknown or will be submitted later Year of manufacture: unknown or will be submitted later Payload: 125kg Height of the column and length of the boom must be submitted later Condition: good Available: from approx. Mid-January to mid-February 2ß25 Location: Munich. Later Frankenberg camp
Offer 25002 Technical data approx.: - Load capacity 250 kg - Projection 6.0 m - Heel height approx. ca. 5.0 m - Wall flange height approx. 1.2 m - Swivel radius approx. 180 ° Hoist Make : DEMAG Specifications: - Load capacity 250 kg -Lifting speed - Drive 400 V 0.5 kW - Operation of the chain hoist via handheld remote control - Swivelling of the boom by hand - Total weight approx. 300 kg
SPRĘŻARKA POWIETRZA DEMAG MARATHON 301 Rjx2L Producent: DEMAG Type: MA301/9AS Ciśnienie: 9 BAR Przepustowość: 28 m3/min. Nr seryjny 50557900 Silnik: 160 kW Data produkcji: 1994 Licznik: 36,170 h Dostępne systemy dodatkowe OSUSZACZ POWIETRZA PARKER HIROSS POLESTAR SMART Producers: PARKER HIROSS Type: PST460 Numer seryjny: 398037030001 Napięcie: 400 V Częstotliwość: 50 Hz Max powietrze w: 65 stopni celsjusza Numer seryjny 50557900 Silnik: 6.26 kW Data produkcji: 03/2011 Waga: 525 kg Czynnik chłodniczy: 407C 7.5 kg
Year. 12/2016 type DC-Pro 5 125 1/1 H5 V24/6 Load capacity 125 kg Hakenweg 5 m Lifting speed 6/24 m/min Warranty - 6 months
Key data: 35000 kN, 30 g/PS, 22 mm
Demag Ergotech Concept 35/280 – 80 Clamping force: 35t Year of construction: 2006 Shot capacity: 30g Injection unit .../80 Screw diameter: 22 mm Injection pressure: 2061 bar Shot capacity: 30 g Hydraulic drive power: 7,5 kW Cylinder heating capacity: 5,1 kW Clamping unit 350/... Clamping force: 35 t Plate size: 460 x 450 mm Distance between tie bars: 280 x 280 mm Opening stroke: 350 mm Max. plate spacing: 530 mm Ejector stroke: 100 mm Weight: 2750 kg Machine dimensions (LxWxH): 3,2 x 1,2 x 2,0 m Equipment: -Filling hopper -Sorting flap -Bimetallic plasticizing system -Hydraulic core on a movable plate -1 x pneumatic valve
Key data: 350 mm, 18
Stock No.: 503175 Manufacturer: DEMAG Type: concept 35-80 Control: NC4 Year of Make: 2004 Clamping force: 350 kN Wooden dimension h x v: 280 x 280 mm Panel size h x v: 460 x 450 mm Min. installation height: 105 mm Plate spacing max.: 455 mm Opening travel: 350 mm Screw diameter: 18 mm Displacement: 23 cc Spray pressure: 2868 bar Screw length: 20 l/d Equipment: Screen text German CEE socket 16A Machine with material hopper Machine with water battery Levelling elements Schuko socket 10A Machine dimensions LxWxH: 3.3m x 1.2m x 2m Total Weight: 2620KG
Spare parts for Demag injection moulding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets
Brand: Demag Machine Type: System 500/900-3300 Year of production: 2008 SPECIFICATIONS 1. Capping unit: - Clamping force: 5000 kN - Dimensions of the fixing plates (H x W): 1300 x 1200 mm - Column clearance (H x W): 900 x 800 mm - Minimum / Maximum Mould Height: 400-880mm - Maximum opening width: 1690 mm 2. Injection Unit: - Screw diameter: 80 mm - Injection volume: 1779 cm³ - Injection weight: 1619 g - Injection pressure: 1855 bar 3. Electrical-hydraulic equipment: - Pump motor rated power: 86 kW - Heater power: 30.6 kW 4. Dimensions and weight: - Net weight with control cabinet: 23.34 t - Dimensions (L x W x H): 8.7 x 2.4 x 2.5 m
Key data: 80 , 200 , 40
Do sprzedania mam: Marka: Demag Typ maszyny: Ergotech Extra 80-430 Rok produkcji: 2002 DANE TECHNICZNE 1. Jednostka zamykania: Siła zwarcia: 800 kN Wymiary płyt mocujących (wys. x szer.): 540 x 540 mm Prześwit między kolumnami (wys. x szer.): 400 x 400 mm Minimalna / Maksymalna wysokość formy: min. 250 mm Maksymalna szerokość otwierania: 450 mm 2. Jednostka wtrysku: Średnica ślimaka: 40 mm Objętość wtrysku: 231 cm³ Ciśnienie wtrysku: 2025 bar 3. Wymiary i ciężar: Ciężar netto z szafą sterowniczą: 3,9 t Wymiary (dł. x szer. x wys.): 4,20 x 1,32 x 2,00 m Mamy 5 bliźniaczych maszyn na stanie.
DEMAG M-MOB-S column-mounted jib crane Stock No.: 503457 Machine/ Equipment Type: Column Slewing Crane Manufacturer: Demag Type: M-MOB-S Year of manufacture: 2018 - Year of construction 2018 - Curb weight 597 kg - Filling weight 3286 kg (filled with metal plates) - Load capacity 320 kg - Max. drawbar load 2200 kg - Projection 2750 mm - incl. wired remote control
Clamping force: 50 t Tool height: 210 mm Opening distance: 400 mm Platten dimensions: 520 x 520 mm Clearance between tie bars: 355 x 355 mm Screw diameter: 30 mm Specific injection pressure: 1990 bar Injection volume: 106 cm3 Shot weight: 94 g Dimensions(m) LxWxH: 3.7m x 1.4m x 1.8m Weight: 2900 kg Condition: working
Key data: 250 kN
Demag Ergotech Compact 250-80 Year of construction: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g Injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Clamping force: 25 t Tie bar spacing: 280x280 mm Size of clamping plates: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 2600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in ...
Key data: 500 kN
Demag Ergotech Compact 500-200 / Machine in very good technical condition Year of construction: 1997 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 7.5 kW Total power: 22.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical te ...
Key data: 4200 kN
Demag Ergotech Concept 420/810-2300 with the Sepro Success 33 robot Year of construction: 2006 Injection unit: Screw diameter: 60 mm Spray weight: 800 g Injection pressure: 2420 bar Dosing volume: 891 ccm Clamping unit: Clamping force: 420 t Tie bar spacing: 800x710 mm Size of clamping plates: 1200x1100 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC 4 Additional equipment: Machine in very good technical condition Euromap 67 Robot Interface Air Valve x 4 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the movable plate x 2 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the fixed plate x 2 Hot runner control x 18 Injection unit hardened - Bimetal Central lubrication Parallel Movements Built-in print quality control system from Sensor Kistler - tool pressure measurement ...
Key data: 500 kN, 94 g/PS, 30 mm
Year of construction 2004 Clamping force: 50 tons. Injection weight: 94 gr. Screw diameter: 30 mm 2 core pulls Good condition
