We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Vacuum Mixer/Dryer/Inclined Bucket Mixer Manufacturer: Drais Type TR 50 EX protected with chopper The mixing plant was opened in November 2008 Renewed by the Lödige company. Material stainless steel 1.4571 / stainless steel 1.4571 Electr. Connected load Drive Vibrator 10.5 kW Adjustable, 31.5 – 380 rpm 1445/2905 rpm Product room printing Product room Temp. Product space Content Double coat Double Jacket Content With head capacitor, Double-acting mechanical seal -1/+6 bar 300 °C 56.5 liters 6 bar 7 litres Weight approx. 2000 kg Length x width x height approx. 2200 mm x 1620 mm x 2065 mm Machine is in good condition ! From plant extraction, pilot plant equipment Installation and operating instructions, as well as electrical diagram and drawings available.
1 MO 1165 Dump Mixer Drais S 7 Drais Werke capacity 2500 l stainless steel, drive 15 KW, pole-switchable via Flender gearbox, cover for mixer, output 20/40 rpm incl. bottom drain (80 mm ball valve manual; Ball valve mounted in such a way that it tilts forward from the mixer 300 to 400 mm for better operation) 1 electric control box with all electrical functions incl. control for bucket elevator, dispersion pump, trough mixer and all safety limit switches incl. cabling 1 base frame approx. 1000 mm high made of 180 180 5 mm square tube incl. working platform circumferential around the mixer, 600 mm wide with gratings and occupational safety railing at a suitable height 1 bucket elevator for loading the mixer, stainless steel, with feeding hopper 600600mm Inlet opening on the bucket elevator adapted, as well as outlet hopper chute on the bucket elevator adapted to the mixer o ...
Stock # U2471-1 Used horizontal vacuum paddle dryer by Drais (DE) model TR100. Contact parts designed in duplex stainless steel (AISI 1.4462). Drying chamber has internal dimensions: diameter 500 mm x length 595 mm. Total volume of chamber about 117 l. Drying chamber is designed for work on pressure range from -0,98 bar / 63 bar. Test pressure - 83,9 bar. Working temperature up to 220 C. Side walls and front door are jacketed. Total volume of jacket 24 l, working pressure 5 bar, temperature up to 220 C. Chamber doors are mounted on moveable arm and are bolted on 18 clamps. Inside drying chamber there is single shaft with 4 welded ploughs. Shaft is belt driven by gearbox and el motor 18,5 kW, 1470 rpm, 400 V, 50 Hz in Ex design (EExdeIICT4). Top feeding inlet with diameter 200 mm, central bottom discharge with manually operated valve with diameter 100 mm. Machine is mounted on carbon s ...
Belt spiral mixer with 1,000 l. gross capacity, equipped with 2 cutter heads (4.0 kW / 2,885 rpm each). Drive belt coil via roller chain. Incl. base frame, without motor and chain (necessary data can be provided). Neat condition.
Batch mixers, used Manufacturer : Drais Volume : 300 ltr. Material : Areas in contact with the product in stainless steel Spur gearbox drive : 7.5 KW; Other equipment : - 1 x cutter head with air flushing, drive : 4 KW; - Control cabinet, incl. frequency converter, as well as with all necessary switching and protective devices; - Circuit diagrams available.
Stock# U2459 Used dissolver by Drais (DE) model RN 3-45 AS VAC. Contact parts designed in carbon steel. Machine is designed for work on vacuum. Mixer has single shaft with working length 105 cm and toothed disc with diameter 690 mm. Shaft is driven by el motor 45 kW, 1460 rpm, 400/690 V, 50 Hz. Working rotation of shaft up to 600 rpm. Mixer has also side wall scrapper, driven by el motor 1.5 kW, 1410 rpm, 440 V, 50 Hz and gearbox. Working rotation of scrapper up to 26 rpm. Machine has top cover and mixing pan with total volume 2000 l. Mixing pan has internal diameter 1465 mm x length of straight side of wall 1160 mm. Mixing pan has two side wall discharge outlets with valves, and bottom supports for work with forklift. Dissolver is rised/lowered hydraulically. Rise up to 145 cm. Hydraulic pack is driven by el. motor 1.5 kW, 1420 rpm, 230/400 V, 50 Hz. Mixer is equipped with vacuum pum ...
Perlmühle Drais PM 25 RL-V Explosion protected version Grinding tank 26 l Agitator power 24 kW with feed pump Very good condition, straight from production!
Perlmühle Drais PM 1 RL-V Explosion protected version Grinding tank 1.3 l Agitator power 2.5 kW with feed pump Revision in 2005 Very good condition, straight from production!
Dissolver Drais RN-PI EX protected version Power 6,8 kW/ 0,75 kW Speed range 0-4000 1/min Toothed disc 20cm Very good condition, straight from production!
Turbulent mixer / paddle dryer Manufacturer : Drais Volume : 2500 ltr. Material : wetted areas in stainless steel Drive : 57 / 40 KW Operating pressure : 5 bar Electr. Power supply : 380 V / 50 Hz; --> Machine with extendable mixing unit.
Bead mill Manufacturer: Drais Type: PM 1 Factory number: 50215 Y.O.M.: 1980 Power: 0.75 kW in Ex-protection Power pump: 0.12 kW in Ex-protection very good condition Dimensions LWH: 800 x 500 x 850 mm Weight: approx. 100 kg
No.: 56218 Power: 4 kW with hose pump and control cabinet highly specified, as good as new
Material: Stainless steel 1.4571 Drive: 15 KW / 400-4000 RPM Weight: 1100 kg Mixer: Turbulent - mixing plant Speed mixing plant: approx. 400-4000 RPM Operating voltage: 400 V Control voltage: 230 V Frequency: 50 Hz Protection class: IP 54; Additionally available: --> Cabinet --> Documentation.
Stock # U2267-2 Second hand stainless steel contact parts (316Ti) sand mill by Drais (Germany) model Perl-mill PMC 12.5 TEX. Machine has total volume of milling chamber 17.2 l and working volume about 12 l. Mill has rotor with plastic rings and works with rotation speed up to 1450 rpm. Machine is driven via belt gearbox by electric motor 13.5 kW, 1500 rpm, 400 V, 50 hz, Eex eIIT3 design. Mill is equipped with feeding pump, filter and electric cabinet. Includes technical documentation. Machine new 2002.
All in one reactor . Material: Stainless steel 1.4571 Drive: 4 kW Volume container: 50 ltr. Volume casing: 10 ltr. Pressure inside: - 0.97 / + 3 bar Outside pressure: 5 bar Temperature: 180 ° C; Weight: approx. 2000 kg Length x width x height (mm): 2200 x 1620 x 2065 Machine in excellent condition!
Material: stainless steel Engine: 37 kW Content: 600 ltr Pressure (inner): 6 bar Weight: 750 kg Length x Width x Height: 2500 mm x 950 mm x 1500 mm Very good conditon, ready to work. Do you look for whole plant or have a questions? We have more then 1000 used machines on stock.
Material: stainless steel Engine: 57 / 40 kW Weight: 7500 kg Length x Width x Height: 2900 mm x 1650 mm x 2000 mm Nominal volume : 2500 ltr. Working pressure : 5 bar electric input power : 380 volt / 50 hertz. Machine with withdrawable mixing device. You can also get the entire system with all components you need. Write us below!
Horizontal batch mixer with 630 l. gross content, pneumatic outlet flap (new cylinder), 37 kW engine, Flender gearbox (N2 = 58.58 UPM) and carbide-armoured mixing tools. Workshop overhauled in 2016; very good condition.
A high-performance Drais bead mill for the chemical-cosmetic industry is available. Flour chamber volume: 15l, operating temperature: 98°C, speed: 1470rpm, flow rate: 2500l/h, power: 45kW. On-site inspection is possible.
Length: 2220mm, width: 1765mm, height: 2030mm, with circuit diagrams and instruction manual.
Drais Dissolver for sale. Manufacturer: Drais Model: RSV 40-3/VAAS Year: 1981 In the photos are also two containers that are included in the scope of delivery. Find more here - / Contact us at -