Emag VSC 200, Year of manufacture 2003, Control Siemens 840 D, Powered tools, max. workpiece diameter 200 mm, max. workpiece length 400 mm, Turning diameter 260 mm, Spindle speed up to 5,500 rpm, Conveyor Circumferential Parts Conveyor, Machine weight 6500 kg,
Control Fanuc 18i-TB Rotary diameter. [mm] 130 Turning length [mm] 110 General: Year of construction 2008 Control Fanuc 18i-TB Turning diameter 130 mm Turning length 110 mm Circumferential diameter 200 mm Workpiece height max. 110 mm Spindle: Motor spindle technology Speed 7,500 rpm Power 24 kW Torque 158 Nm C-axis 0.001° Clamping Cylinders Full-Clamping Cylinders Tool carrier (X/Z): Technology Star Turret Number of stations 12 pieces Tool holder VDI 40 Tool drive 6,000 rpm, 40 Nm X-axis 400 mm Z-axis 200 mm Equipment / Accessories: Direct displacement measuring systems (glass scales) Chip disposal chip conveyor Coolant supply high-pressure pump Automation of circulating workpiece storage Exhaust mist extraction Mechanically prepared
Vertical Single Spindle Turning Center Lathe Vertical Manufacturer: EMAG Type: VL 400 (Siemens) Year of Make: 2021 Operating hours: approx. 1,848 Turret basic unit and carriage unit Y-axis HP Turret Drive Unit for Powered Tools (C442) with internal coolant supply to the tool Max. speed: 6,000 min-1 Corner speed: 3,200 min-1 Tool carrier unit for driven tools: 12 x BMT75 Circumferential workpiece transport system, O-type Drag frame system for 10 workpieces Workpiece height (incl. workpiece pallet): max. 300 mm Workpiece weight: max. 60 kg Set (10 pieces) drag frame for O-band for workpiece diameter: 150 - 400 mm Blowing off the workpiece and the clamping device (pick-up) Coolant supply: 15 bar Coolant pump Flow rate approx. 80 l/min at 15 bar. Cooling unit (6.5 KW, water - air) A cooling unit (with 2-circuit technology) regulates the heat balance of the ma ...
GENERAL Project No.: 905696 Quantity: 1 pcs. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of Make: 2010 Condition: Used machine Program run approx. (hrs.): 49,479 DESCRIPTION TURN Max. turning diameter 210 mm Max. turning length 100 mm Max. circumferential diameter over bed cover 210 mm Max. speed main spindle 7500 1/min Max. power main spindle at ED 10-40/100% 25/16 kW Max. torque main spindle at ED 10-40/100% 200 Nm Spindle diameter in the front bearing main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm Max. rapid traverse speed in X/Y/Z Main spindle unit 60/-/30 m/min Feed force in X/Y/Z Main spindle unit 5000/-/5000 N Direct displacement measurement system main spindle unit X/Z Full-clamping cylinder on the main spindle Revolver Bottom N ...
Diameter / length parts 200 /100 mm Disc-shaped parts 100 mm Part length 10-140 mm Speed 6000 1/min 12-speed turret Sauter without driven tools Three-jaw chuck Workpiece stations: 20 workpieces
It is a CNC-VSC 400 turning grinding center from EMAG: CNC machining center EMAG VSC 400 DDS, 2-spindle, year 2006, AL: 50kW, weight 13,000kg, control Siemens 840D, Chip conveyor brand Sermeto, attached extraction unit IFM, separate cooling and lubricant preparation DGS with belt filter and cooling tower HYFRA
1 Piece Used CNC Vertical Turning Center with Fanuc Control With tool monitoring With Beldestation
Inv. Num. : 7575 Type: VL7 Produzent: Emag Erzeugt: 2010, GO 2012 Parametern: Steuerungssystem: Fanuc 32i TB Max. Drehdurchmesser: 420 mm Maximale Drehzahl der Spindel: 3400 1/min Verfahrwege X: 850 mm Verfahrwege Z: 315 mm Spannfuttergröße: 400 Länge: 5250 mm Breite: 3500 mm Höhe: 3500 mm Gewicht: 9000 kg Ausstattung: Kühlung Späneförderer Angetriebene Werkzeuge Messsonde
GENERAL Project No.: 905623 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Siemens 840 D solutionline Year of construction: 2018 Condition: Used machine Program run approx. (hrs.): 28,500 DESCRIPTION TURN Max. turning diameter 210 mm Max. turning length 100 mm Max. circulation diameter over bed cover 210 mm Max. speed main spindle 7500 1/min Max. power main spindle at ED 10-40/100% 25/16 kW Max. torque main spindle at ED 10-40/100% 200 Nm Spindle diameter in the front bearing main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z Main spindle unit 400/-/200 mm Max. rapid traverse speed in X/Y/Z Main spindle unit 60/-/30 m/min Feed force in X/Y/Z Main spindle unit 5000/-/5000 N Direct Displacement Measuring System Main Spindle Unit X/Z Full-clamping cylinder on the main spindle Rev ...
Inv. Num. : 5794 Type: VSC 250 DS Producer: Emag Created: 2007 Parameters: Control system: Siemens Maximum turning diameter: 250 mm Maximum turning length: 100 mm Axis X: 680 mm Z axis: 200 mm Nominal current: 35 kW Weight: 7500 kg
Inv. Num. : 4723 Type: VL 5S Producer: Emag Created: 2007 Parameters: Control system: Siemens 840 SL Maximum turning diameter: 260 mm Tool holder: 12 pieces Lathe length: 3800 mm Lathe width: 2100 mm Lathe height: 2400 mm Lathe weight: 7000 kg
Year of construction: 2011 Control Siemens 840 Dsl Rotation diam. [mm] 250 Spindle: Motor spindle technology Speed 6,000 rpm Power (max.) 39 kW Torque (max.) 460 Nm Clamping cylinders Full clamping cylinders Workpiece clamping 3-jaw chuck, SMW autoblock, KNCS-NB-260-72 Tool carrier I: Technology turret with 12 stations Tool holder VDI 40 Tool drive 6,000 rpm, 7.5 kW, 24 Nm Tool carrier II: Technology:Drilling station with IK feed Tool holder Capto C8 General: Travel in X/Z 1,180/525 mm Rapid traverse in X/Z 60/30 m/min Equipment/accessories: Displacement measuring system directly in X/Z (glass scale) Chip Management Chip Conveyor Coolant management IKZ system with paper belt filter and high pressure Tool breakage monitoring ARTIS CTM Automation of circulating workpiece storage, L-type Oil mist extraction Electrostatic separator, IFS IFE2000
Turning center USC 11, Emag – used - : Price from location: 29.500.-€ (net), plus dismantling etc.! System designation turning center USC 11 Manufacturer: EMAG Year of construction: 2006 Available: now Condition: good - very good Location: Hamburg area Technical data of the machine: Current Chuck passage max 160 mm X-travel 300 mm Z-travel 300 mm Main spindle bore 180 mm maximum speed 2000 rpm Motor main drive 80KW full power from spindle speed 500 rpm Feed rapid traverse speed. in X 35 m/min Feed rapid traverse speed. in Z 35 m/min Maximum power for X and Z 4.1 KW Maximum torque for X and Z 13 KW Operating voltage 400 V Control voltage - DC 24 V AC 230 V Frequency 50 Hz Connected load 130 KW Supply fuse 250 A Weight approx. 20,000 kg Description of the plant components: Machine bed length 3000 mm Cross slide 2-axle Motor lockers: frequency-con ...
Vertical CNC Lathe Manufacturer EMAG Type VL2 Y Year of construction 2016 Control Fanuc max turning diameter 100mm turning height 150mm Chuck diameter 160mm 12 x BMT 55Tool carrier unit for driven tools Circumferential workpiece conveyor belt 27 pcs Coolant supply 15bar Conveyor Workpiece measurement Machine is connected to another Emag VL2 Machine is in TOP condition
Vertical CNC Lathe Manufacturer EMAG Type VL2 Y Year of construction 2015 Control Fanuc max turning diameter 100mm turning height 150mm Chuck diameter 160mm Y-axis 12 x BMT 55Tool carrier unit for driven tools Circumferential workpiece conveyor belt 27 pcs Coolant supply 15bar Conveyor Workpiece measurement Machine is connected to another Emag VL2 Machine is in TOP condition
GENERAL Project No.: 905398 Quantity: 1 pcs. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of construction: 2001/2022 State of condition: Refurbished machine Layers approx.: 2-3 layers DESCRIPTION TURN circulation diameter over bed cover 210 mm chuck diameter 170 mm speed main spindle 7500 1/min power main spindle at ED 10-40/100% 25/16 kW torque main spindle at ED 10-40/100% 134/85 Nm Spindle diameter in the front bearing Main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm rapid traverse speed in X/Y/Z main spindle unit 60/-/30 m/min Feed force in X/Y/Z main spindle unit 5000/-/5000 N Direct displacement measuring system main spindle unit X/Z Full clamping cylinder on the main spindle Revolver bottom Number of stations/driven by 12/12 Tool ho ...
:::TECHNICAL SPECIFICATIONS::: CNC Model: Siemens CNC Version: 840D Main spindle nose: ASA 8 Inverted lathe: yes X axis spindle travel: 850mm Z axis spindle travel: 250mm Stoker or spare parts warehouse: yes Main spindle power: 43Kw Main spindle self-centering diameter: 315mm Turning diameter: 250mm Turning length: 125mm Number of turns main spindle: 4300 Number of Tool Towers: 1 Number of tool places first turret: 12 Number of motorized first turret: 12 First turret tool attachment type: VDI 50 Rapid linear axis feeds X Y Z: 45m/min Chip evacuator: carpet Number of motorized tool holders supplied: 1 Number of fixed tool holders supplied: 10 :::D IMENSIONS AND WEIGHT::: Length: 3380mm Width: 1300mm Height: 2900mm Weight: 7000Kg
Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd
CNC EMAG VL2 vertical (2014) Stroke type: CNC vertical lathe Manufacturer: EMAG Model: VL2 Rocky Mountains: 2014 Condition: very good, regularly serviced, used until the end of 2024
Two identical Emag CNC machining centers including a chip conveyor, coolant tank, various holders, jaws and a new AGW are available. Chuck diameter: 200mm, max. circulation diameter: 290mm, max. workpiece length: 140mm, speed: 6000rpm, power: 34kW, torque: 480Nm. Travel X/Z: 550mm/200mm, rapid traverse X/Y: 30m/20m/min, feed force X/Z: 11kN. Tool positions: 12, drive tool power: 7.8kW. Machine dimensions X/Y/Z: approx. 2700mm/1150mm/2800mm, weight: approx. 6500kg. Documentation available. On-site inspection is possible.
turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible.
turning diameter:250 mm swing diameter:260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools!
weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine
turning diameter:175 mm turning height:70 mm chucking diameter:175 mm
turning diameter:200 mm swing diameter:260 mm turning height:60 mm
swing diameter:200 mm weight of the machine ca.:15 t Distance between tips:832,5 mm turning length:380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers
swing diameter:200 mm weight of the machine ca.:25 t Distance between tips:832,5 mm turning length:380 mm driven tools
turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight: je 6 t : 2 : ja : ja control: Siemens The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
