5 offers

Manufacturer:
Manufacturer:
Your found location: Latitude 0.0 + Longitude 0.0
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:

Manufacturer:
(Category: 308-3058)

EOS 1
other machines for plastic / 3D Printers
05.11.2026
item-No.: 162755346

used

Location: Land-at
Price: 8.000 €

Formlabs Fuse 1: Compact SLS 3D Printer for Nylon Components I'm selling a Formlabs Fuse 1. It's one of the few SLS printers that fits into a normal office or workshop. It doesn't need its own room, nitrogen or extraction. A 10 W fiber laser sinters nylon powder layer by layer. Support structures are eliminated, so you can fill the build space tightly with parts and print many components in one pass. Technical data Build space: 165 × 165 × 300 mm Laser: Ytterbium fiber laser, 10 W, 1064 nm, spot size 200 μm Layer thickness: 110 μm Materials: Nylon 12, Nylon 11, Nylon 12 GF (glass fibre reinforced) Up to 70% waste powder can be reused per print (nylon 12) Software: PreForm (free), files as STL or OBJ Connection via WLAN or Ethernet, operation via touchscreen Dimensions: approx. 64 × 69 × 107 cm (without base) Weight: approx. 114 kg Application The Fuse 1 is i ...

other machines for plastic / 3D Printers
05.11.2026
item-No.: 162755347

used

Location: Land-at
Price: 12.000 €

Formlabs Fuse 1+ 30W: SLS 3D Printer for Nylon, TPU and Polypropylene I'm selling a Formlabs Fuse 1+ 30W. It's the successor to the Fuse 1 and has a laser that is three times as powerful. This means that it prints up to twice as fast and can process more materials. As with its predecessor, there are no support structures. The powder carries the parts, so you can fill the entire build space with components. The printer fits in a normal workshop or office and doesn't need its own room. Technical data Build space: 165 × 165 × 300 mm Laser: Ytterbium fiber laser, 30 W, 1064 nm, spot size 200 μm Layer thickness: 110 μm Materials: Nylon 12, Nylon 12 White, Nylon 12 GF, Nylon 11, Nylon 11 CF, TPU 90A, Polypropylene Nitrogen connector (optional), which allows nylon 11 and polypropylene to be printed under inert gas Software: PreForm (free), files as STL or OBJ Connection via  ...

other machines for plastic / 3D Printers
02.09.2026
item-No.: 162737642
New in: 2017

used

Location: Land-de
Price: 8.000 €

Keyence Agilista 3200W High Resolution Industrial 3D Printer Material Jetting AR-M2 AR-G1L AR-G1H Type: Agilista - 3200W Manufacturer: Keyence Corporation, Japan Date of purchase according to invoice: 18.05.2017 Operating time: 40,985 h Printing time: 1,907 h Specifications: - Printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (silicone rubber [low hardness]), AR-G1H (Silicone Rubber [High Hardness]) - Support material: AR-S1 (water-soluble support material) - Build space: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 μm, normal Resolution AR-M2: 20μm, AR-H1: 20μm, AR-G1L/H: 30μm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: color touch panel - Dimensions 95 x 70 x 136 cm - Weight 188 kg 3D, 3D Printer, 3D Printer, Agi ...

other machines for plastic / 3D Printers
23.06.2025
item-No.: 162713296

used

Location: Land-pl
Price: 17.250 €

STRATASYS F270 FDM 3D printer was built in the United States by STRATASYS. The machine is used for prototyping and production of components with complex geometries in the FDM technology, which involves applying successive layers of molten material according to pre-calculated print paths. The process uses a combination of a build material (ABS, ASA, PLA) and a support material (QSR). 3D printing is performed inside a sealed work chamber by two print heads. Throughout its lifetime, the F270 industrial 3D printer has operated for a total of 17000 hours and has been regularly serviced. During the service work, the touchscreen display, power board, material drawer rail, material feed lines to the heads and Y-axis gantry were replaced. The STRATASYS 3D printer is offered with additional print heads. Technical specifications of the STRATASYS F270 FDM printer - software: GrabCAD Print -  ...

other machines for plastic / 3D Printers
05.11.2026
item-No.: 162755323

used

Location: Land-at
Price: 40.000 €

LIKE NEW (hardly used) - XYZprinting MfgPro230 xS: SLS 3D printer for nylon and TPU incl. sift station I'm selling an industrial SLS printer from XYZprinting. The MfgPro230 xS uses a 30W CO2 laser to sinter plastic powder layer by layer to produce finished parts. It doesn't need support structures. The loose powder carries the parts, so several components can be stacked on top of each other in the build space (nesting) and produced in a single print job. Technical data Build space: 230 × 230 × 230 mm Laser: CO2, 30 W, spot size 80 μm Layer thickness: 0.08 to 0.2 mm Mounting speed: around 20 mm per hour Materials: sPro12W (PA12) and sProTPU, open material system Closed build chamber with nitrogen atmosphere and heated print bed Removable build module: While one print is cooling down and being unpacked, the next can already be running Operation via touchscreen, software ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996