We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Cintex CS4000 Metal detector checkweigher Stainless, combination metal detector checkweigher, belt dimensions 2100mm x 150mm, aperture 220mm x 100mm, weigh platform 350mm x 150mm, weight range 20g to 1Kg, pneumatic blow reject into reject bins, with spare belts, 1Ph
used
Garvens BF8 S2 Belt checkweigher with poor discharge and collection container, Weighing range up to 250 g, e=0.1 g, belt width approx. 150 mm, Center distance infeed conveyor approx. 305 mm, Axle distance run-out conveyor approx. 400 mm, axle distance weighing cell approx. 200 mm, Conveyor belt speed 10 - 70m/min, from left to right, Mains voltage 230V, mains frequency 50 Hz, Dimensions 900 x 900 x 1600mm (LxWxH).
used
Checkweigher up to 1000 g, with automatic reject system, suitable for continuous weight control.
used
Loma CW3 Checkweigher Serial: EQCW-143-DEV-026380 2022, Stainless checkweigher, belt dimensions 2050mm x 180mm, weigh bed 180mm x 200mm, weight range 100g - 1500g, with pneumatic push arm reject into locked reject bin, HMI Touch screen controls, 1Ph
used
Loma CW3 Checkweigher Serial: EQCW-143-DEV-028420 2022, Stainless checkweigher, belt dimensions 2200mm x 190mm, weigh bed 180mm x 200mm, weight range 100g - 1500g, with pneumatic push arm reject into locked reject bin, HMI Touch screen controls, 1Ph
used
Loma CW3 Checkweigher Serial: EQXCW-143-DEV-026382 2022, Stainless checkweigher, belt dimensions 2080mm x 190mm, weigh bed 180mm x 200mm, weight range 100g - 1500g, with pneumatic push arm reject into locked reject bin, HMI Touch screen controls, 1Ph
used
The machine is in good condition and was only used as a back-up machine for 10 years. It has been cleaned and extensively tested. so that it is immediately ready for use. The scale is calibratable. The conveyor belts are functional but no longer so beautiful. The display and computer were renewed in the last week of production. Type: S3 Rejection: Pusher Year of Make: 2006 Screen: X-Terminal HMI Dimensions: 1330 mm x 900 mm x 1700 mm. (L/W/H) Load cell: TF20 Capability characteristics: • Legal-for-trade design • Classification in up to 7 weight classes • 115/230 V~, 50/60 Hz, 1 phase, 500 VA • Automatic or manual zeroing • Various switchable program languages • 100 item storage • Flexible integration into production lines •Password S-Series Weighing Terminal: • Touchscreen color display, TFT 15 inches, • User-friendly: TachoControl, menu nav ...
used
Checkweigher up to 750 g, with automatic reject system, suitable for continuous weight control.
used
OCS type HC inline checkweigher with weighing cell Wipotec EC 2000, weighing range up to 750 g, d=-0.01 g, belt width approx. 145 mm (3 individual belts with a width of 30 mm each), centre distance infeed approx. 450 mm with pre-cut head stabelizing belt with a length of approx. 350 mm and a width of approx. 30 mm, centre distance weighing cell approx. 200 mm, centre distance outfeed approx. 680 mm, working height 800-950 mm, conveying direction from left to right, carton flap control with bad ejection, folding carton inclination control with bad ejection and ejection counter-check, folding carton weight control with bad ejection and ejection counter-check, capacity up to 600 weighings per minute, compressed air 6 bar, electrical connection 230V/50 Hz, connected load 0.8 KVA, machine footprint approx. 1600 x 800 mm (WxD), machine height approx. 2050 mm, net machine weight approx. 290 kg. ...
used
used
Sartorius SYNUS10 Metal detector checkweigher Stainless, overall belt dimensions 1700mm x 150mm, with Sartorius MDP Plus metal detector aperture 200mm W x 330mm H, checkweigher platform 260mm x 150mm, weight rang 100g to 2000g, two push arm rejects, previously used for jars of olives, 1Ph Password 1827