used Commercial kitchens for sale

AUTOMATIC EDGE BANDER machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner technical data : min. height of gluing panel mm.10 max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin composition : gluing group with glue tank pressure rollers edge feeder end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge - n ...

Code: 0090 Brand: BIMATIC - ITALY Model: MASTER 12 - CE Standard Single-sided automatic edge bander with grinding unit for applying edges in wood, veneer, abs, pvc, melamine, roll materials for joinery, furniture, custom furniture, kitchens, bathroom furniture, panels and various - CE Standard Technical data: Edge thickness mm 0,4 - 12 Panel height mm 8/60 Min panel width mm 70 Min panel length mm 60 Glue pot capacity lt 4 Heating time 5 minutes Working speed mt/min 10-15 Automatic upper presser lift Protection booth Telescopic support roller conveyor for supporting large panels Control panel with operating system by microprocessor - Double digital thermostat controller - Emergency light - Operating controls for all the electropneumatic units Entrance fence with electropneumatic movement synchronized with the premilling unit Premilling unit in entry for perfect  ...

Code: 0303 Brand: BP BAIONI - ITALY Model: BP/C T/70 - CE Standard Hydraulic hot press for wood, custom-made furniture, panels, kitchens, composite materials, various - CE Standard Platen size mm 3000 x 1300 N° 6 pistons Opening width mm 400 Platen heating by hot water Thrust ton 80 Emergency perimeter rope Overall dimensions mm 3400 x 1470 x 1900 h Weight kg 4000

Code: 0351 Brand: CABO - ITALY Model: 3200 Automatic double end tenoner with tilting blade and scoring unit for panels, furniture, custom-made furniture, kitchens, composite materials, aluminium, acoustic panels Technical data Maximum cutting width mm 3200 Maximum cutting length mm 3200 Minimum distance between blades mm 300 Maximum cutting height mm 100 Maximum diameter of blades mm 300 Maximum diameter of scoring unit mm 200 Blades inclination 0-45° Blade motor power Hp 5 each Automatic feed carriage with variable speed Automatic opening between blades Scoring motor power Hp 1 each Pneumatic workpiece clamping Overall dimensions of assembled machine: mm 4200 x 4500 x 1200 h Overall dimensions for transport: mm 4500 x 300 x 1000 h + mm 4200 x 1100 x 1000 h Weight kg 1700

Code: 0270 Brand: CASATI MACCHINE Model: HF/BP Boring hinges and plates inserting machine for furniture, kitchens, bathroom furniture and various Motor power Hp 1,5 Boring unit stroke mm 100 Max boring depth mm 50 Millimetric length of shoulder mm 1000 Head with 4 spindles : Centre distance between 2 spindles mm 52 Operating pressure 6 bar Overall dimensions mm 1000 X 680 X 700 h Weight kg 60

Code: 0242 Brand: GABBIANI Model: MODUL/80 Automatic double end tenoner for furniture, doors, kitchens, cabinets, window frames, panels, prefabricated houses, raised floors, composite materials, and various Max working width mm 3200 Min working width mm 150 Max working height mm 180 Operating units: 1° Upper blade unit - Motor Hp 3,2 - Rpm 2900 - Suction mouth diameter mm 120 2° Lower blade unit - Motor Hp 4,5 - Rpm 2850/5700 - Suction mouth diameter mm 120 3° Spindle moulder unit - Motor Hp 7,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 4° Automatic spindle moulder unit - Motor Hp 5,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 5° Spindle moulder unit - Motor Hp 5,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 6° Spindle moulder unit - Motor Hp 7,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 Feed speed variator Automatic shoulder opening with dis ...

Code: 0079 Brand: HIRZT - ITALY Model: LIVRA/5 - CE Standard Point to point through-feed boring machine with drilling from the bottom for furniture, kitchens, custom furniture, bathroom furniture, panels, for joinery and various - CE Standard Features: Total flexibility: Zero setting time High productivity : very short time of panel loading/unloading Graphic and parametric CN 4 NC axis: Axis X : panel movement by clamps Axis Y : boring head movement Axis Z : vertical boring head movement Axis X : micro head movement for front/back boring Aggregate circular saw Full Productivity : For serial processing the unloading system allows a high productivity - lt is possible to process sequences of big and small lots with a reduction of positioning and loading times Advantage of boring from the bottom - 1.Cleaning: Boring from the bottom gets the panel's good face protec ...

Code: 0465 Brand: IDM - SCM GROUP Model: IDIMATIC 49-20 Automatic edge bander for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various Technical data: Min/max gluing height mm 10/50 Min/max edge thickness mm 0,4/20 Min panel width mm 60 Min panel length mm 140 Adjustable feed speed m/min 12/18 Electric press lift Telescopic support for large panels Soundproof cabin Composition: Anti-adhesion unit: spreads anti-adhesive liquid on the upper and lower surfaces of the panel Gluing unit with pre-melting unit Pressure rollers End trimmer unit for front and rear vertical cutting of excess edging - N° 2 motors 0,5 Kw at 12000 rpm - Tool diameter mm 110 Top/bottom trimmer unit with superimposed motors for trimming the upper and lower sides of the excess edge band - N° 2 motors 0,5 Kw at ...

Code: 0244 Brand: MARTIN Model: T74 AUTOMATIC - CE Standard Controlled axis panel saw with scoring unit for furniture, fwindow frames , kitchens, window frames, doors, panels, composite materials and various - CE Standard - Year 2007 Technical data: Carriage length mm 3300 Working table height mm 900 Blade diameter mm 500 Max cutting height mm 170 Blade inclination 0-46° Parallel guide cutting width mm 1600 Quick change blade system PRO LOCK Motor Kw 5,5 Scoring unit with 3 controlled axes - Motor Hp 1 - Rpm 11500 - Blade diameter mm 120 F 22 - Cutting height mm 4,5 - Cutting width min/max mm 3/4,8 Parallelogram transversal table for angular cuts - 46,5 / + 46,5° with display Blade lifting/blade tilting/parallelogram guide programming Power PC control User interface: Touch screen 10,4 Main blade lubrication device N° 2 suction ports: diameter 120 mm - diamete ...

Code: 0238 Brand: ORMAMACCHINE Model: 30/6 Hydraulic cold press for panels, furniture, customised furnishings, kitchens, composite materials, insulation materials, aluminium and various materials Platen dimensions mm 3000 x 1200 Opening width mm 450 N° 6 cylinders Motor power Hp 1,5 Dismountable press Overall dimensions mm 3300 x 1500 x 2000 h Weight kg 1500

Code: 0257 Brand: SCM Model: SI 150 N - CE Standard Panel saw with tilting blade and scoring unit for furniture, custom-made furniture, doors, panels, kitchens, plastics, composite materials - CE Standard Squaring carriage length mm 1500 Blade diameter mm 300 F 30 Scoring unit diameter mm 100 Blade tilting 0-45 degrees Cutting height mm 95 Motor power Hp 5,5 Cutting width at parallel fence mm 1270 Overall dimensions of assembled machine mm 1600 x 3300 x 1000 h Weight kg 480

CIRCULAR SAW model SCM SI 400 EP CLASS with CNC-controlled 3-axis ( blade lifting, blade inclination, motorized parallel guide ) with scoring unit EASY CNC electronic control CE regulations : YES with Instruction Manual and CE declaration conditions of use: excellent volts.380/50 Electronic control: manual, semi-automatic and automatic management modes - operator interface with clear and professional graphics 7 inch Wide screen color display for precise cutting of furniture, custom-made furnishings, kitchens, panels, doors, frames, composite materials, aluminum and various materials Composition: Sliding carriage in extruded aluminum with large section, rigid and with closed reticular structure for maximum resistance Anodized and hardened surface for maximum wear resistance Ground prismatic guides Worktop complete with extensions, it is made entirely of cast iron a ...

Code: 0126 Brand: SCM Model: STARTECH 23 - CE Standard Multiple boring machine for horizontal, vertical and 45 degree inclined boring for furniture, custom-made furniture, panels, kitchens, doors and various - CE Standard N° 23 quick-attack spindles Spindle centre distance mm 32 Max drilling centre distance mm 704 Max drilling depth mm 60 Spindle rotation speed rpm 2800 Min/max panel thickness mm 10/70 Working table height mm 900 Pneumatic panel clamping pressures Motor power Hp 3 Compressed air 6 bar Extension Overall dimensions mm 1440 x 1200 x 1100 h Weight kg 430

Code: 0348 Brand: SCM Model: TOP 35 - CE Standard Semi-automatic multiple boring machine with 35 spindles for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard Technical data: N° 35 quick-attach spindles Spindle centre distance mm 32 Spindle rotation speed rpm 2800 Max drilling unit stroke mm 127 N° 2 motors Working table height mm 840 Motorised tilting of drilling unit 0-90 degrees Revolver with 6 drilling depth positions Pneumatic clamping pressures Working pressure bar 6 Overall dimensions mm 1700 x 1600 x 1500 h Weight kg 700

Code: 0318 Brand: SCM MINIMAX Model: UNILEV N15 Universal sanding machine for straight and shaped edges for sanding furniture, wooden doors, kitchens, furniture, chairs, armchairs, frames and various Technical data: Tilting worktable 0-45° Additional worktable for machining of shaped workpieces Worktable length mm 1440 Abrasive belt width mm 150 Vertical movement of oscillating unit mm 150 Belt motor 2 speeds Abrasive belt length mm 2170 Operating pressure 6 bar Overall dimensions mm 1450 x 720 x 1400 h Weight kg 450

AUTOMATIC EDGE BANDER machine model STEFANI MONOBETA 4000 second hand machine with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , thin solid wood strips for furniture, furnishings, kitchens, bathrooms, doors, panels and various XILIA positioner system technical data : tiltable gluing group: 0° / 7° min. height of gluing panel mm.10 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.25 min. panel width mm.60 min. panel length mm.110 adjustable feed speed: from 8 to 22 mt./min. electric press lift telescopic support for large panels soundproof cabin composition : 1. gluing group with glue tank 2. pressure rollers 3. edge feeder 4. end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors 0,44 Kw at 12000 rpm 5. trimming unit ...

Code: 0231 Brand: SIMI - ITALY Model: 4 - L Cold press for furniture, kitchens, wooden doors, custom-made furniture, composites, aluminium, plastics and various materials Technical data: Platen dimensions mm 2500 x 1800 N° 2 intermediate platens Max opening between platens mm 500 Max opening between intermediate platens mm 140 N° 4 pistons Max thrust 3kg/cm2 Emergency perimeter rope Overall dimensions mm 3200 x 1900 x 2150 h

Code: 0328 Brand: SIMI Model: SI 3300 Hydraulic hot press complete with boiler for wood, custom-made furniture, panels, kitchens, composite materials, various materials Technical data: Platen dimensions mm 3300 x 1300 Max opening mm 450 Thrust ton 100 N° 3 pistons diameter mm 100 Double closing button Emergency perimeter rope Hot water platen heating Boiler Overall dimensions mm 4200 x 1400 x 2200 h Weight kg 4000

Code: 0555 Brand: STEMA 2 BR Model: INSERMATIC CB/86 - CE Standard Drilling and inserting machine for furniture hinges , kitchens, cabinets, furniture in general - CE Standard Technical data: Drilling unit: Electropneumatic unit with motor Hp 2- 3000 rpm - Works from bottom to top, from under the panel - Drilling head: 3 spindles for hinges - 2 spindles for mounting plates Hinge insertion unit: N°1 single loader Worktable: rubber-coated rollers width 500 mm N° 6 mechanical stop blocks Suction 1 mouth diameter mm 80 Panel clamping: N° 2 vertical pressers Volt 380/50 Compressed air 6 atm Overall dimensions: mm 3600 x 1300 x 1300 h Weight kg 530

Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12 TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Overall  ...

Code: 0409 Brand: THEOREMA Model: BR 3000 SPECIAL - CE Standard CNC boring and pantograph working centre with 3 controlled axis for furniture, kitchens, bathroom furniture, panels, doors and miscellaneous - CE standard Technical data: Minimum overall dimensions Useful length X axis mm 3000 Useful length Y axis mm 1300 X axis speed mt/min 24 Y axis speed mt/min 24 Z axis stroke mm 65 Max panel thickness mm 65 Boring unit with n° 18 spindles - Right-left drill chuck diameter mm 10 - Rpm 4000 Pantograph with pneumatic tool release - Motor Hp 7,5 - Rpm 0/18000 - Inverter for spindle Kw 5,5 Nesting worktable Suction cups mm 150 x 150 Rapid panel positioning Optimisation of the drilling path Specularity of drilling and milling cycles Interpolation on three X-Y-Z axis Vacuum pump cubic metres 100 Compressed air atm 6 Overall dimensions: mm 4400 x 1700 x 2400 h Weig ...

Code: 0097 Brand: VITAP Model: ALFA 35 T - CE Standard Semi-automatic multiple boring machine with 35 spindles for furniture, kitchens, bathroom furniture, custom-made furniture, panels - CE Standard Technical data N° 35 spindles with quick coupling Centre distance between each spindle mm 32 Centre distance between first and last spindle mm 1088 Max depth of hole mm 70 Board dimensions mm 1454 x 590 Spindle rotations per minute 2800 Motor power Hp 3 Turret with 6 different depth positions Side fence Horizontal/vertical 45 degree pneumatic tilting head Metric bar 3000 mm with stops Fence for 45 degrees frames Operating pressure 6- 8 atm Overall dimensions mm 1590 x 860 x 1140 h Weight kg 454

Code: 0266 Brand: Z&B MASTERWOOD Model: B 29 Multiple boring machine with 29 spindles for kitchens, furniture, custom furniture, bathroom furniture, panels etc. Technical data: Max drilling centre distance mm 896 Distance between spindles mm 32 Table size mm 1215 x 750 Max vertical drilling depth mm 120 Max horizontal drilling depth mm 100 Motor power Hp 4 Operating pressure 6-8 atm Overall dimensions mm 1530 x 980 x 1400 h Weight kg 750