used Compressed air, vacuum and thermo moulders for sale

Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...

Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate ...

Palletizing robot for cartons Manufacturer: ABB Type: IRB 6640-130/3.2 / IRB 6640 M2004 Reach radius: 3.2m Handling Weight: 130kg Year of construction: 2010 Incl. tool for palletizing cartons by means of vacuum. Without vacuum generator. Palletizing robot for cartons Manufacturer: ABB Type: IRB 6640-130/3.2 / IRB 6640 M2004 Reach Radius: 3.2m Handling weight: 130kg Year of manufacture: 2010 Incl. tool for palletizing cartons by means of vacuum. Without vacuum generator.

63mm x 2mm AEF / Thermatool ERW Tube Mill Make: AEF (American Electric Fusion) Tube Diameter: 15mm – 63.5mm Material Thickness: 0.5mm – 2mm Tube Length: 6 meters Double Mandrel Uncoiler Entry Shear & End Welder TIG Power Supply Vertical Accumulator Make: Kent Driven Entry and Exit Pinch Rolls Strip Guiding Unit Forming Mill Individual Gear Boxes Universal 50HP DC Motor Six (6) Forming Stand Five (5) Side Stands Welding Section Make: Thermatool Type: Vacuum ERW Design Power: 200Kw Mechanical Welding Head Beat Removing Head with Winder Cooling Tank & Pump

Line for madeleines, minicakes, and also for cookies and other Year 2014 Capacity 600 - 800 kg/h Including AERA oil sprayer AERA depositor for soft dought AERA depositor for hard dought with wire cut POLIN oven gas 20 metres long used for trays 600 × 400 mm Cooling conveyor AERA troubleshoot (vacuum) Packaging aera with linear weigher, Schib CO50 flowpack double jaws for individual sachets, counter with Vegatronic vertical bagger Line in very very good shape More photos and videos on demand

Plotter - cutter-creaser, digital cutter Make AG Model Kasemake KM600 Year 2000 ? Bed size 158 x 222 cm vacuum bed Capcity up to 15 mm thickness Functions can cut and crease many types of materials including board and plastics, ideal machine for small runs of box making, figures, etc, in any direction Details inclduing the computer + software and license

Agilent 1100 HPLC system, serviced, ready for use incl. control PC = Ready-to-use all-in-one Agilent HPLC system (1100 series), including configured control PC, tubing, and connectors. Condition: Very good, used, currently maintained and checked by a specialist company. Warranty: 3 months (if delivered by a specialist company) The modules: Agilent (HP) On-Line Vacuum Degasser - Model No. G1322A (Made in Japan) Agilent (HP) Quaternary Pump - Model No. G1311A (Made in Germany) Agilent (HP) Autosampler - Model No. G1313A (Made in Germany) Agilent (HP) Column Thermostat - Model No. G1316A (Made in Germany) Agilent (HP) DAD Detector - Model No. G1315A (Made in Germany) Agilent (HP) Solvent Tray Configured control PC with monitor, keyboard and mouse Software: Chemstation We will be happy to answer any questions you may have about the offer and provide you with further  ...

ALBERTI 5-axis machining center model POLAR EVOLUTION 3.5 CN: – maximum working range 3500 x 1637 mm – Z-axis stroke 600 mm, thickness machinable on suction cups 160 mm – 2 phenolic resin worktops of 1700 x 1632 mm: for alternating or synchronous machining vacuum free type, with holes connected to the vacuum system, NC-controlled zero points and retractable stops, with 12 blocks of suction cups with double vacuum chamber (without hose) Becker vacuum pump + pneumatic clamps for small parts – Automatic lubrication, optimised and centralised suction – electronic control with TPA and ALBATROS software, visualization program in Windows environment, EDI32-TPA EDITOR (CAD-CAM 3D) – machine in compliance with CE standards, with double front concealed barrier (for loading/unloading of the 2 worktops) and perimeter protections – machine dime ...

In original box. Never used Pfeiffer Adixen Alcatel ATH 1600 M Turbomolecular Vacuum Pump - 5-axis magnetically levitated turbopump with drag stage for a pump speed of up to 1,400 l/s for N2.

Vacuum cutter Alexanderwerk Body made of stainless steel Volume: 65 liters Dimensions: 130x120x130cm Electrical power: 15/20kW

Continuous vacuum filler for straight filling and portioning Integrated vacuum pump Program memory for 99 filling programs Electric power: 4 KW Machine dimensions in cm: Width: 60 Length: 110 Height: 160

STOCK NUMBER U2064 Description: Used line for compacting powders by ALEXANDERWERK (Germany). Line consist of: - feeding system - includes: 50 l powder container, rotary valves, vacuum pump, piping and bag filter. - horizontal, twin screw, feeder with adjustable working speed in range 0-77 rpm. - granulating system - includes - preparation granulator and two precise granulators, type RFG 150N. All granulators works with adjustable speed in range 0-112 rpm. - intermediate tank with screw type agitator, working with adjustable speed in range 0-20 rpm. - roll compactor ALEXANDERWERK model WP170/120V, designed in stainless steel. Machine has two rolls, each with width 120 mm x diameter 170 mm, mounted vertically. Rolls are working with adjustable speed in range 0-20 rpm. Driven by gearbox and electric motor 7.5 kW. Rolls are pressured via hydraulic device. Maximal pressing power up ...

Used Alfa Laval vacuum drum filter

BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Mail : infoeveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

Alfa-Laval Deaerator/Evaporater DC-750-E In excellent condition Dearator with external condensor and liquid ring vacuum pump. No level control on it. Condensor data. SS single pass tubular heatexchanger. 43 tubes, 14x1mm, length 1980mm. Total cooling area of condensor 3.24m2. P&ID available

Quick Frame Alpha 4 (Italy) Product name: Quick Frame Model: Alpha 4 Manufacturer: Alfamacchine (Italy) Sales: Bohle AG Serial no.: 46096 Year of construction: 2003 Condition: Used and tested technical details: for making picture frames Weight: 36 kg with foot switch for hardwood (oak), medium hard wood (ramin), softwood (pine, pine) necessary working pressure: 4 - 7 bar Pressure gauges Manual adjustment for working pressure incl. compressor (SIL. AIR, Italy) Operating instructions Spare parts list incl. bracket assortment (photo) Compressor data (SIL. AIR 30-9) Tank capacity: 9 L Flow rate: 50 L/min Pressure: 8 bar (adjustable) Year of construction: 06/1991 Voltage: 230 V Current: 2.4 A Power: 340 W incl. connection hose Device dimensions (L x W x H): 560 x 300 x 400 mm Our price: Quick frame: 890,00 € (EUR) FP plus VAT ex Grunow (Brande ...

Filler ALFATEK – 20 valves • Year: 1995. • Speed: 3.500 bph. • Direction: Clockwise. • Filler 20 valves – low vacuum. • Safety protections.

Vacuum cutter VK 125 STL bowl 125 l, knife speed from 300 to 4200 rpm., Ejector hydraulic, without feeding, 6 cutter head, Busch vacuum pump, connected load approx. 40.0 kW Vakuum bowl cutter VK 125 STL,, Bowl volume 125 l, knife speed from 300 till 4200 rpm., unloader, without loading system, knife head with 6 knives, Busch vacuum pump, Power approx. 40.0 kW

Part no: 29510910, 35PSI, DUBLEX FILTER. BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

Type: SPF10R56G8.3-W20, Nr: Q.5007779 , 6 bar, 0,57kw, 12mm²/s, 33.27 l/min BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

Code: 0332 Brand: AMASPRES (ITALY) Model: 3000 Membrane press Working size: mm 3000 x 1300 Opening mm 500 Working height mm 250 Cover opening and closing with vertical pneumatic pistons This press is suitable for veneer of shaped pieces , such as window sash frames, curved pieces Upper heating with hot air Heating of lower side with hot air Consuption about 9 kwt Working cycle: about 10 min. Complete compressor for lifting of cover and under cover Processing prevacuum adjustable up to 6.5 atm The machine is equipped with time alarm, thermostat, thermometer, warning lights for calories and pumps Overall dimensions press mm 4100 x 1700 x 2050 h - Weight kg 1800 Overall dimensions depressor mm 1400 x 500 x 900 h - Weight kg 100

AMP VBF-60/60/100-1.5 horizontal vacuum furnace was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long workpieces with a maximum weight of 600 kg, without the risk of deformation. The AMP vacuum furnace ensures that a constant temperature of 1180°C is maintained throughout the treatment, due to the insulation inside the heating chamber in the form of a graphite mat fixed to the chamber casing by molybdenum rods with graphite composite pads. The capacious heating chamber also contains heating elements, charge holding supports and cooling nozzles through which cooling gas flows during the cooling cycle. All parameters, such as vacuum, temperature course and cooling gas pressure, are programmed in a special controller, installed in a  ...

Used twin-screw, parallel, counter-rotating extruder by Amut model BA92 NOMAX. New 2011. Output: 270 - 370 kg/h Hours of operation: 53638 h Other details: - Diameter of augers 92 mm - L/D ratio 28:1 - Drive power 60 kW (400V, 50 Hz, 3 ph) AC - Two sets of screws -for ABS processing -for PVC processing - Number of cylinder heating zones 7 - Number of cylinder cooling zones (air) 4 - Number of heating zones for head and adaptor 5 + 1 - Built-in pressure and temperature measurement system for plastic mass - Thermal oil unit for thermostating the worms for PVC - Drive power of vacuum degassing pump 11 kW - Drive power of screw feeder 1.5 kW - Without control (subassemblies available according to the list)

REF-0 ANGELUS 60L AUTOMATIC CAN SEAMER WITH 6 SEAMING HEADS AND 24-VALVE VACUUM FILLING MACHINE Automatic can seamer with 6 seaming heads. Manufacturer: Angelus. Model: 60L. Can size: ø73mm. Complete with a 24-valve vacuum filling system (the vacuum pump is included). Overall dimensions: width 2,400mm, length 4,000mm, height 2,600mm.

Used Apag SRV20 rotary / vacuum filter. - 20m2 filtration area - Filter drum diameter 1721mm - Length of filter drum 3750 mm - Rotational speed of the filter drum 0-9 r.p.m. - Vacuum pump capacity 450m3 / h - Extraction pump capacity 36m3 / h - Feed pump capacity 36m3 / h - Air consumption 1 Nm3 / h - Water consumption by a 1 m3 / h vacuum pump - Washing water intake 50-80 1 / m3 - 2.2 kW filter drum power consumption - Power consumption of the cutting knife cutting 0.18kW - Power consumption of the 11kW vacuum pump - 2.2kW feed pump power consumption - 3kW extraction pump power consumption - 1.1 kW coadiuvante mixer power consumption - Acid resistant design. - Weight 4300 kg. - Year of construction 2002. - Manufacturer's documentation.

Used Apag SRV20 rotary / vacuum filter. - 20m2 filtration area - Filter drum diameter 1721mm - Length of filter drum 3750 mm - Rotational speed of the filter drum 0-9 r.p.m. - Vacuum pump capacity 450m3 / h - Extraction pump capacity 36m3 / h - Feed pump capacity 36m3 / h - Air consumption 1 Nm3 / h - Water consumption by a 1 m3 / h vacuum pump - Washing water intake 50-80 1 / m3 - 2.2 kW filter drum power consumption - Power consumption of the cutting knife cutting 0.18kW - Power consumption of the 11kW vacuum pump - 2.2kW feed pump power consumption - 3kW extraction pump power consumption - 1.1 kW coadiuvante mixer power consumption - Acid resistant design. - Weight 4300 kg. - Year of construction 2002. - Manufacturer's documentation.

Manufacturer: APDTip: 12 SCPumping speed 3600 l/sCapacity 5x10-6 TorrIdeal for high vacuumNumber: 11 pcs; ready for use

A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water precoth 3 bar or slightly higher Residual -0.2 less than 0.1 ppm for a water temperature of 12°C with 1 APV centrifugal pump with 15 KW with 1 vacuum pump, manufacturer Travini Italy, 11 KW with CO2 dosing via needle valve with level control of the entry and exit Water 1 control cabinet on 2 feet standing with Siemens switchgear equipment Dimensions of the system: 2,900 x 1600 x 3200 mm Weight of the plant 950 kg A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water pre-pressure 3 bar or slightly higher residue -0.2 less than 0. ...

Arburg 470S 1000-290 / Production line with the Wittmann W821 robot / Operating hours: approx. 35,000 h in automatic mode Year of manufacture: 11.2012 Injection unit: Screw diameter: 30 mm Injection weight: 97 g Spray pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Spar spacing: 470x470 mm Size of the clamping plates: 637x637 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Operating hours: 35,000 h in automatic mode Euromap 67 Robot interface Air Valve x 2 Hydraulic, needle-core pull, controlled by a proportional valve x 2 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Cavity pressure sensor Priamus Robot Wittmann W821 Year of Make: 2012 5-axis robot: 4 axes are drive ...

Arburg 470S 1000-290 / Production line with the Wittmann W821 robot / Operating hours: approx. 35,000 h in automatic mode Year of construction: 2012 Injection unit: Screw diameter: 30 mm Injection weight: 97 g Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Size of clamping plates: 637x637 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Operating hours: 35,000 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic, needle core pull, controlled by a proportional valve x 2 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Cavity pressure sensor Priamus Robot Wittmann W821 Year of construction: 2012 5-axis robots: 4 axes ...

Arburg 570H 2000-2100 with the Sepro Industrial Robot SDR 22S robot / Hybrid machine / Operating hours: approx. 29,000 h in automatic mode Year of construction: 2010 Injection unit: Screw diameter: 70 mm Injection weight: 984 g Spray pressure: 2000 bar Dosing volume: 1078 ccm Clamping unit : Clamping force: 200 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 29,000 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Air Core Pull x 7 Hot runner control x 15 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving The injection unit  ...

Arburg 570H 2000-2100 with the Sepro Industrial Robot SDR 22S robot / Hybrid machine / Operating hours: approx. 29,000 h in automatic mode Year of Make: 2010 Injection unit: Screw diameter: 70 mm Injection weight: 984 g Spray pressure: 2000 bar Dosing volume: 1078 ccm Clamping unit : Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 29,000 h in automatic mode Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Air Core Pull x 7 Control with hot runners x 15 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection u ...

Arburg 570S 2200-290/100/100 / Production line with the Wittmann W843 robot / Operating hours: 23,897 h in automatic mode Year of construction: 2014 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 23,897 h in automatic mode Euromap 67 Robot Interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed  ...

ARPAC M16632 Manufacturer: ARPAC USA Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. F ...

Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print and Apply Bar Co ...

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMIN ...

Vacuum Pump Atlas Copco GHS 900VSD Vacuum Pump Year: 2020 - Ultimate pressure: 0.35mbar(a) 0.26 Torr 35.0 Pa - Voltage: 380-460V - Frequency: 50 / 60 Hz 3pH - Pmotor: 15.3kW / 21hp - N: 700 r/min - Weight: 520Kg - Year of construction: 2020

These compressor elements from the compressed air brands like Atlas Copco, Kaeser, CompAir and Boge are refurbished here in our in-house workshop by our well-trained technicians. All refurbished air ends are sold with a comprehensive guarantee. Furthermore, aircoolers and oilcoolers for oil-injected screw compressors and aftercoolers and intercoolers and oilcoolers for oil-free air compressors for all well-known brands like Atlas Copco, Kaeser, CompAir, Boge and Ingersoll Rand.

Full container of premium second hand brands like Atlas Copco, Kaeser, Boge, CompAir, Almig, Ingersoll Rand for Export. All models available like GA, ZT, ZR, AS, ASD, BSD, CSD, DSD, SFL, L, etc.

New ATM Vacuum packer Double chamber machine Seal bar 550 mm, distance between bars 640 mm, All stainless steel. Busch pump,Best uk price for quality machine

ATMA ATMACE 710/G screen printing machine was manufactured in 2012 in Taiwan by ATMA CHAMP ENT. CORP. The machine is used for precision printing of medium-sized items, i.e. posters, car stickers and advertisements, on both rigid and flexible flat substrates. The sliding vacuum table made of aluminium alloy with high resistance offers a large working area. Quick replacement and positioning of the screen frame, on the other hand, is ensured by a special gripper, equipped with a micro screen adjustment and pneumatic lock. The ATMACE 710/G screen printing machine can also be integrated into production lines to increase productivity. The total weight of the machine is 1290 kg. The offer also includes the AERORTERM ULTRATERM UV 1100/3000 drying tunnel, manufactured in 2009 by the Czech company AEROTERM a.s.. The machine, designed for curing UV inks and varnishes, is equipped with one row of ...

ATMSolutions ATMS 1325 CNC milling machine built in 2017 in Poland is designed for the production of both small and large parts made of e.g. aluminium, plastic or wood. Distinguished by its state-of-the-art solutions, the machine performs the machining process on a large vacuum table using a powerful, water-cooled spindle. The steel frame, by increasing the overall rigidity, makes it possible to achieve unprecedented precision and accuracy in machining, removing any vibration and deformation. In addition, the X and Y axes are equipped with trapezoidal guides with gear drives with bevel teeth, thanks to which excellent dynamics and feed repeatability are achieved. This is complemented by an intuitive CNC control with professional CAM software that supports G-CODE and .nc commands. The ATMS 1325 CNC milling machine weighs 1000 kg. Technical specifications of the ATMSolutions ATMS 1325 m ...

Tabletop cutting plotter with the following equipment: - 2 Z-axes for 2 tools (one for knives and one for milling motor, currently no milling motor installed but only knives) - oscillating blade, pneumatically driven - Vacuum table with automatic field control - 2 pieces of adjustable vacuum pumps - All axes with servo drive - Auto-nesting software module - Interactive layout software module for manual positioning of the contours to be cut - 3 tool heads for blades thickness: 1x 0.64mm blades, 1x 1.0mm blades, 1x 1.5mm blades

Chiller, chiller make AxAir, 180 Kw, R410A, with 4 compressor

Manufacturer: AXIS Type: 703MG7.5T Capacity: 3420 m3/h Vacuum: -270 mbar Operating pressure: 260 mbar Power: 7.5 kW

Used lab homogeniser from Axomatic model MINIMIX 5 Lt. New 2015. Technical specifications supplied for the MINIMIX 5 Lt: Tank: - Type: vertical cylinder with flange - Bottom: cup-shaped bottom welded to the cylinder - Lid: cup-shaped welded to the flange with integrated silicone gasket, liftable - Jacket: with cup-shaped bottom, surrounding the tank - Insulation: on tank, made of mineral wool, surrounded by welded sheets Capacity: - Total: 6 litres - Working: 5 litres - Minimum: 1.5 Litres Materials: - Tank: AISI316 internally polished - Bottom: AISI316 internally polished - Lid: AISI316 internally / externally polished - Jacket insulation: AISI304 polished - Parts in contact: AISI316 internally polished - Frame facings: AISI304 satin-finished scotch brite type - Scrapers: TEFLON movable Operating conditions: - Tank: full vacuum / atmospheric pressure ...

Monoblock AXTRA 7.1 – BEER Year: 2018 Speed: 1.000 BPH - 330 ml 500 BPH - 750 ml Labeller: Nr1. adhesive station. (it can apply wrap-around or front and back label) Filler 7 valves – low vacuum Corker single head – 26mm and 29 mm crown cap. Safety protections.

built 1984, 800 mm diameter, 1.400 mm cylindrical part, 570 mm cone height, 1 vacuum filter with bag charging hopper, filtering surface 2,3 m², 3 blow through cellular wheel sluices 150 mm x 150 mm for feeding a conveying system.

Baader 142 - The Ripper Machine for vacuum evisceration of salmon, trout Released: 1998, 1999 Condition: excellent This Baader 142 machine is designed to eviscerating salmon, trout weighing from 1.3 kg to 11 kg (head or without). The fish being processed is loaded into the machine by hand. A strong clip captures the carcass from the tail for further transportation. The fish is then measured using electronic sensors to help determine the location of the cut. The cutting mechanism is controlled by sensors and the computer, it produces a careful, symmetrical cut, which does not affect the insides. The insides are removed by means of a vacuum device. Processed fish weighing from 1.3 to 11 kg Performance: 16 fish/min Vacuum pumps and waste tanks included

Baader 142 gutting machine Condition: Overhauled The Baader 142 gutting machine is specifically designed for gutting salmon, sea trout, and coho within a weight range of 2 – 7 kg, whether with the head on or head off. The fish to be processed is manually loaded onto the machine. With the assistance of a powerful tail clip, the fish is gently transported. The machine utilizes electronic measurements and calculations to determine the precise position for making cuts on the fish. It excels at performing accurate mechanical princess cuts. The integrated suction devices and throat cutting tools effectively collect and remove the guts. The throat is separated from the inside of the head while ensuring that the gills remain intact on the fish. We provide all necessary units for operating the Baader 142, including the vacuum pump, cyclone, and inspection belts. Capacity: Able to pr ...