7 offers

Manufacturer:
Manufacturer:
Your found location: Latitude 0.0 + Longitude 0.0
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:

Manufacturer:
(Category: 107-661)

sheet metal working / Cutting-To-Length Lines
16.11.2026
approved
dealer
item-No.: 162751873

used

check
Location: Land-pl
Price: 44.500 €

CIDAN QLA-PROFI slitting and cut-to-length line is designed for the efficient machining of sheet metal fed from a coil. It enables the slitting of material with a maximum thickness of 3 mm into strips of a specified width, as well as cut-to-length into sheets with a maximum length of 1550 mm. The combination of both cutting methods in one process enables the efficient preparation of the material for subsequent machining stages while maintaining high dimensional accuracy and repeatability. The CIDAN QLA-PROFI 1550/1,5 coil slitting line consists of machines built between 2008 and 2011, which were combined into one complete system in 2023. It includes: – 5t sheet metal decoiler – CIDAN QLA-PROFI cutting unit with straightening and feeding rolls, circular knives for slitting and a guillotine for cut-to-length – SPX-20/130-2C hydraulic table – sheet metal recoiler – scrap r ...

sheet metal working / Cutting-To-Length Lines
08.09.2026
approved
dealer
item-No.: 162751645

used

check
Location: Land-it

Slitting and cut-to-length line Sheet width. 1,500 mm Sheet thickness.. 0.4 - 4.0 mm Belch width 4 mm 700 mm Slitting 2.0 mm 4 pcs. Straightening rollers... 8 pcs. Coil weight 7,000 kg Facility consists of: - Bundle pallet truck -Decoiler -Loop control -Straightening machine -Strip scissors -Cross shears 1,500 x 4.0 mm - Electrical control. Line complete overhauled, new control, all defective parts replaced, part painted RA 60 11

sheet metal working / Cutting-To-Length Lines
25.12.2024
item-No.: 162723551

used

Location: Land-de

Hego cut-to-length line Working width 500x2mm Speed 10-12m/min Decoiler mechanical max. 1000kg Coil inner diameter 400/508mm Straightener with 9 straightening rollers and 2 feed rollers and film unwinders The offer is aimed exclusively at tradespeople within the meaning of §14 BGB no sale to private individuals!

sheet metal working / Cutting-To-Length Lines
11.10.2026
approved
dealer
item-No.: 162744761
New in: 2010

used

check
Location: Land-de

Qty. 1 Second-hand rotary shear cut-to-length line – still in operation Mfc.: PACO E.N.G Built: 2010 Still in operation! Raw Material: CR, EGI, GI, STS, AL, COLOR COATING COILS Tensile Strength Max.: 60 kg/mm2 Strip Width: 300 ~ 1,550 mm Thickness: 0.2 ~ 3.0 mm Coil Weight: 20,000 kg Sheet Length No. 1 Piler: 300 - 2,500 mm No. 2 Piler: 300 ~ 2,500 mm Piling Weight No. 1 Piler: 5,000 kg No. 2 Piler: 5,000 kg Coil ID: ∅508 mm, ∅610 mm = RUBBER SLEEVE Coil OD: ∅800 mm ~ Max. ∅2,000 mm

sheet metal working / Cutting-To-Length Lines
23.06.2025
item-No.: 162713303
New in: 2018

used

Location: Land-pl
Price: 825.000 €

2000 X 2-6 MM cut-to-length line was built in 2018. The line was specially configured for machining stainless steel in a start-stop system with a stationary guillotine and sheet pick-up from the discharge conveyor. Maximum production efficiency is ensured by the use of a special system that packs the sheets into bundles after cutting. Other proven solutions, in turn, guarantee many years of trouble-free operation of the line. The offered cut-to-length line has undergone a general overhaul and is in perfect condition. All components meet the safety standards required by the applicable directives, as confirmed by the CE declaration. The 2000 X 2-6 MM cut-to-length line is fully complete and consists of the following components: – scissor lift table – sheet metal decoiler 7.5 t – infeed and guide system – sheet metal straightening unit – double-side foiling system – gui ...

sheet metal working / Cutting-To-Length Lines
25.07.2026
approved
dealer
item-No.: 162749618

used

check
Location: Land-de

Qty. 1 Second-hand cut-to-length line including straightening, polishing and grinding units Manufacturer: UNGERER / GEORG, EMG, IMEAS Built: 1986 / 1997 /1998 / 2009 still in operation Material: stainless steel Strip width: 500 – 1.250 mm Thickness: 0.40 – 1.00 mm Coil weight – DECOILER max.: 10.0 t RECOILER max.: 5.0 t Coil ID – Ø 500 mm OD – Ø 1.500 mm Sheet length: 500 – 6.000 mm Stacking weight max.: 4.000 kg Working speed – grinding max. 20 m/min. Working speed – grinding + brushing: 4 – 12 m/min. Working speed – brushing: 4 – 6 m/min. Working speed – cutting max.: 20 m/min. Working direction right ⇒ left Length tolerance ± 0.40 – 3.000 mm

sheet metal working / Cutting-To-Length Lines
29.07.2026
approved
dealer
ankerimg
item-No.: 162742322
New in: 2012

used

check
Location: Land-de

Cut-to-length line 2,000 x 12 mm Bandwidth. 2,000 mm Tape thickness... 4-12 mm Coil weight 30 tons. Straightener 11 reels Speed 15 m/min. Main Engine. 200 KW Voltage. 380 V / 50 Hz.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996