used Exchange engines for sale

MANUFACTURER: ABB TYPE: TPS48 F33 FULLY RECONDITIONED LIKE NEW CONDITION SUITABLE FOR DEUTZ TBD 620 ENGINES

Hi, I offer you Hydraulic power pack-three engines 90 KW each -oil tank 4500l, -Each engine drives two hydraulic pump gear -Pump Model 45V60A Power supply power to the extruder scrap shears in the set are three Dimensions chydrauliczne 160x190 coolers coolers 3 x -cooling connection 100 mm -power connection 80 mm Very Good Condition Net price: 59900 $-€14000 contact: + 48 600-517-834

Skid with a triagi reactor manufactured by ATTP in stainless steel, model MTA-250, with agitation and a volume of 250 liters, and 2 lung tanks with agitation. The reactor engine has a power of 7.5 kW, and the tank engines 1.5 kW. Volume Total capacity 250 L Material 316/316L stainless steel Jacket or half-coil material To be determined Stainless steel Technical features Model MTA-250 Year of manufacture 2018 Equipment configuration Agitator Transport information Length 5000 mm Width 2300 mm Height 2820 mm Condition That's how it is Made by Unknown

We can offer brand new (2024) 113 MW power generation plant natural gas 80 % financed 47% efficiency 11.3 MW 60 hz (50 hz is possible) 10 x Bergen Engines Model B36:45V20AG Natural gas Could be converted to diesel 12 month Bergen warranty

BERGEN B32:40L8 DISEL ENGINES 3 PCS COMPLETE ENGINE, BUILT YEAR 2008 POWER : 3840 KW , 5220 BHP @ 720 RPM

BERGEN B32:40V12 DIESEL ENGINES, 3 PCS BUILT YEAR 2008 POWER: 7840 HP / 5765 KW @ 720 RPM

BERGEN B35:40-V16 AG Generating Set Fuel: Natural Gas Voltage: 6300 V Completely Overhauled at 58,624hrs. Scope of supply: Engine 750RPM, Alternator, Control panel, Gas line. In these engines the top-end is done every 15,000 hours. In the Major overhaul, there is no need to disassemble the crankshaft because in these models the bearings can be disassembled without having to remove the crankshaft, everything is done on-site. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

BERGEN BRM-8 DIESEL ENGINES RATING KW: 3530 RATING BHP: 4800 SPEED: 750 RPM

TO WHOM IT MAY CONCERN WE VE 3 PCS BERGEN KRG-9 COMPLETE ENGINES AT OUR STOCK. ENGINES HAS BEEN REBUILT ON 2006. ENGINES PRESENT CRANK SHAFTS HAS STANDARTS SIZE CLASS HARD STAMP ON IT. ENGINES MAINTENED WELL. ENGINES ARE TURNING W?TH GOOD SUCT?ON ALL ENGINES READY TO TRANSPORT TYPE KRG-9 ENGINE NO 3186-3187-3188 BUILT YEAR 1986/REBUILT 2006 KW 1825 SPEED 750 MADE IN NORWAY ENGINES TURBO CHARGERS ARE ABB VTR 254-P11 IF YOU VE ANY FURTHER QUEST?ONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST Regards; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

BERGEN KRMB-9 DIESEL ENGINES RATING KW : 2005 SPEED : 825 RPM BUILT YEAR : 1997

BERGEN KVGS-18G4.2 Generating Set Fuel: Natural Gas Voltage: 6300 V Complete Overhaul at 50.363 hrs, stopped in April 2023. Scope of supply: Engine 750RPM, Alternator, Control panel, Gas line. In these engines the top-end is done every 15,000 hours. In the Major overhaul, there is no need to disassemble the crankshaft because in these models the bearings can be disassembled without having to remove the crankshaft, everything is done on-site . Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Rolls Royce Bergen B32:40 L6P engines for sale in our stock in Istanbul Turkey Bergen B32:40 L6P complete engine with turbo charger In our stock in Istanbul 3 pieces available year: 2002 3000 kw 750 RPM in good condition please contact : info@fin-marine.com

Type: It's a Double Iridium spark plug. This means both the center electrode and the ground electrode are tipped with iridium alloy. Benefits: Double Iridium construction provides: Extended Service Life: Significantly longer lifespan compared to conventional nickel or even single platinum/iridium plugs, reducing maintenance intervals. Reliable Ignition: Offers consistent and reliable ignition performance under the high pressure, high temperature, and often lean-burn conditions found in industrial gas engines. Improved Efficiency: Contributes to stable combustion and optimal engine efficiency. Design: Typically features an M18 thread (M18x1.5mm), common in many large industrial gas engines. Applications: The Bosch 7308 is widely used and often specified for various industrial gas engines, most notably: MWM (Caterpillar Energy Solutions / formerly Deutz Power Systems): Very comm ...

9222022 Gas Generator CAT 4.5 Mwe and 4.3 MWe with Auxiliaries Two separate 4.5 MW and 4.3 MW / 50 Hz natural gas engine driven generating sets with auxiliaries. Manufacturing years 2016 and 2014, total operating hours 3000 and 1000 hours only. Engines are CAT CG260-16 type high efficiency 1000 rpm units coupled Marelli’s 11 kV air cooled alternator. Both units with full CAT service records, still installed and can be tested. Both units have engine cooling made with two closed loop cooling radiators, one for HT and another for LT engine cooling circuits. Equipment is close to new like condition. Technical characteristics Manufacturer: CAT, USA Manufacturing year: 2014 and 2016 Engine type: CAT CG260-16 Engine speed 1000 rpm Operating hours since new 3000 and 1000 only Alternator CAT/Marelli MJH 800 MC6, Cos Fee 1 Power output 2014 4100 kWe continuous load Power o ...

Diesel generator 3 x 2200 kWe / 60Hz with CAT C280-8 Engines, Unused Offshore Units - 2011 The C280-8 generator set incorporates years of proven 3600 engine series with the latest technology in electronics. The result is a fully integrated solution that is ideal for offshore operations but can be applied also to land based power generation. Complete package offerings are MCS type-approved and compliant with IMO Tier II emission standards. Single Cat ADEM A3 electronic engine control module with electronic unit injector fuel system. Included in the package all the tools, accessories and mufflers as well as copies of Bureau Veritas original documentation and certificates Technical characteristics: Manufacturer CAT USA Model C280-8 / I-8 Manufacturing year 2011 Number of units available 3 Total operating hours Unused Zero Hours Rated Speed 900 RPM Generato ...

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

Diesel Generators 4 x 2400 kW / 50Hz Containerized CAT C175-16 Gensets Never operated, new like condition, containerized diesel generators made in year 2016 and 2017. Generating sets have modern, low fuel consumption optimized CAT C175-16 diesel engines running in 1500 rpm and having standby electric capacity of 2400kW and 2000kW in continues operation. Units include all necessary auxiliaries for full operation. Technical characteristics Manufacturer: Caterpillar USA Diesel Engines: CAT C175-16 Manufacturing year: 2016 and 2017 Operating hours: Zero (New condition) Number of units: 4 pcs Output – Stand-by: 2400kW / 400V / 50 Hz Output – Continuous duty: 2000kW / 400V / 50Hz Fuel: Diesel oil Control system: EMCP 4 Control Panels Container dimensions: 16 x 4.1 x 4.1 m (L x W x H) Container weight: 56’000 kg

Diesel Generators 4 x 2400 kW / 50Hz Containerized CAT C175-16 Gensets Never operated, new like condition, containerized diesel generators made in year 2016 and 2017. Generating sets have modern, low fuel consumption optimized CAT C175-16 diesel engines running in 1500 rpm and having standby electric capacity of 2400kW and 2000kW in continues operation. Units include all necessary auxiliaries for full operation. Technical characteristics Manufacturer: Caterpillar USA Diesel Engines: CAT C175-16 Manufacturing year: 2016 and 2017 Operating hours: Zero (New condition) Number of units: 4 pcs Output – Stand-by: 2400kW / 400V / 50 Hz Output – Continuous duty: 2000kW / 400V / 50Hz Fuel: Diesel oil Control system: EMCP 4 Control Panels Container dimensions: 16 x 4.1 x 4.1 m (L x W x H) Container weight: 56’000 kg

Make: Caterpillar Model: 3516C (Marine Propulsion engines) Built year: 2014 Condition: New / Unused Qty: 4 Power: 2240 kW Speed: 1800 RPM Contact us at infoheeyas.co.uk #engine #caterpillar #marine #new #propulsion #vessel #ship #energy #power

CATERPILLAR 3616 DIESEL ENGINES , 2 PCS SERIAL NUMBERS : 1PD00473 & 1PD00466 ARRANGEMENT NUMBER: 7E7016290-9952 POWER: 6786 HP / 5060 KW @ 900 RPM

Make: Caterpillar Model: C32 Mfg year: 2014 Condition: New / Unused Power: 781 kW Speed: 1800 RPM Qty: 4 Only engines (No alternators/generators) Contact us at infoheeyas.co.uk #caterpillar #marelli #generator #genset #cat #diesel #vessel #ship #energy #power #new #dieselgenerator #dieselgenset #catgenerator #newgenerator #newgenset #shipgenset #shipgenerator #electric

CAT C32 marine propulsion engines 2 unit available Running hours: 42117 and 43446 In good condition

2 x CAT 3516 CHP Plant Complete cogeneration plant from a cancelled project. Generators have been preserved indoors and kept warm. Internal inspection has found condition to be very good. Engines have commissioning hours only; 8 hours on one unit and under 5,000 hours on the other. Year: 2001 Hours: 10.000 Capacity: 975 kW HZ: 50 Volts: 400 Scope of Supply: Complete generating plant including engine, alternator, base frame, control system, gas line, exhaust gas heat exchanger, electrical panels and radiators. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com

For 3512C engines Make: Caterpillar Model: SR5 Mfg year: 2016 Condition: New / Unused Qty: 4 Rated Power: 2125 kVA Rated Voltage: 690 V Rated Frequency: 60 Hz Made in USA Contact us at infoheeyas.co.uk #caterpillar #engine #generator #alternator #new #power #energy #3512C #oil #gas #drilling #ship #vessel

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines :  ...

CNC Router and 3D engraving machine T-Rex 0712: Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 17.000 mm/min Operating speed max. ca. 12.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table1650 x 880 mm Travels: X=1200mm; Y=700mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines  ...

Equiptment / product data CNC-milling machine type High-Z/TRex series / 1224 Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 2800 x 1340 mm Travels: X=2400mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines : LxBxH ca. 3070 x 1800 x 1420 mm Mill ...

FOR SALE... 2 SETS PROPOLSUION ENGINES CREPELLE 6R 26L CWR & 6R 26L CCWR TO WHOM IT MAY CONCERN; WE VE 2 SETS PROPOLSUION CREPELLE ENGINES AT OUR STOCK PLS FIND ENGINES DETAILS ON BELOW ENGINES CRANKSHAFT IS MARKED WITH STANDARD SIZE CLASS STAMP. TYPE 26L 6R CWR & 6R 26L CCWR POWER 1323kW ENGINE NO. C037 / C045 RPM 810 YOB 1990 WE CAN SELL ENGINE AS COMPLETE OR WE CAN DISMANTLE AND SELL WITH MAJOR PARTS ENGINES EX STOCK. READY TO TRANSPORT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Used Cummins KTA38 M2 engines building year 2007 with working hours 35000 hours

6 diesel engines, only engines Cummins KTA50 G6, around 16.000 work hours

Marine engines very good condition take out of Yacht 50meters 1200HP@1800 complete over all. ZF gear boxes model 451-1 Reduction ratio 4:1

RUNNING TAKEOUTS 1510 KW AT 1800 RPM NEW MODEL 620 MARINE DISEL ENGINES

Many elements of the engines are susceptible to being reconditioned when they begin to deteriorate. RS MOTOR has the capacity to recondition these elements and also a very large stock of them, this allows us to proceed with the repair at any stoppage at the plant, avoi-ding stops and high investments. The use of reconditioned elements can also be consideted in maintenance steps of some relevance. Some of the refurbished items that are normallu in sotcks are: CYLINDER HEADS COMPLETE ENGINES BLOCKS INTERCOOLER ACTUATORS PUMPS ...

TO WHOM IT MAY CONCERN ; WE VE 2 PCS USED PROPULSUION ENGINES DEUTZ MWM TBD 620V8 AT OUR STOCK. ENGINES WERE DISMANTLED FROM SUPER YACHT . ENGINES ARE FULL ORIGINAL MARINE ENGINES. ENGINES ARE IN GOOD WORKING CONDATIONS . ENGINE DETAILS ON BELOW TYPE. : DEUTZ MWM TBD 620V8 YOB. : 2002 KW. : 1027 RPM. : 1805 ENGINES NO. : 2203455 & 2203456 ENGINES READY TO INSECTIONS AT OUR WARE HOUSE AND READY TO SHIPMENT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. ENGINES HAS ALSO ZF GEAR BOXES ( THOSE CAN SELL SEPERATLEY ) ZF 4600 NR CAP. AYHAN UGURLUBAY With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

FOR SALE ... DEUTZ MWM TBD 620 V8 ENGINE 1997 YOB AT TURKEY HAVE A GDY SIR; WE VE 1 SET DEUTZ MWM TBD 620 V8 ENGINE AT STOCK . ENGINE WORKING HRS IS 2320HRS ENGINE IS READY TO LOAD ON TRUCK .. PLS FIND DTLS OF ENGINES AT BELOW TBD 620 V8 ENGINE NO 620.08 000166 YOB 1997 1500RPM 880Kw IF YOU VE ANY FURTHER QUESTIUONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba Best Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Different types of TEM control system units, (VME32AI, A-IN 32-1, I/O 32-1, SERV 24/3-1, STEP 24/2-1, CM16DI, CM16DO, CM2AI, CMPS) Different types of DiaNe XT control system units, (Displays, CPU-s, I/O cards, etc) Engine control module for CAT gas Engines (CAT3516B) CAT ECM 348-2392-01 Different types of W ecs cards: (Analog input/output, digital input/output, power supplies, C-control units, D-control units, SM units, KD units, etc.) We have a lot more just contact us.

Year: 2005 - technically efficient, ready to work – after full service - 3 engines - pneumatic clamps - copying templates - roller feeders with gauges (right + left)

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...

FUJI KING DEBARKERS CAPACITY 200t/h ( one double section 60 t/h) USED EQUIPMENT, DISASSEMBLED, WASHED, LOADED ON TRUCKS AND CONSOLIDATED IN CONTAINER. MODEL KD6/50DT (EACH DEBARKER) YEAR OF MANUFACTURE 1995 TECHNICAL SPECIFICATIONS OF EACH EQUIPMENT: • TWO (2) DOUBLE ROTOR SECTIONS EACH. • SECTION LENGTH OF 7.65 mt (25') • TOTAL LENGTH OF 15.3 mt (50´) • WIDTH OF THE INTERIOR COMPARTMENT OF PIECES OF 2.4 mt. • MAIN ROTORS DIAMETER 0.9 mt. (36”) x LENGTH 7 m (23’) • POWER SYSTEM: 2 ENGINES 575 V 60 Hz 100 HP CONNECTED TO THE REDUCER MOTOR AND DRIVING THROUGH CHAIN. • VARIABLE SPEED FROM 16 TO 50 RPM. • DISCHARGE DRIVEN BY VERTICAL CHAIN AND MOTOR 575 V 60Hz 3HP • NET WEIGHT: 42 TONS PER SECTION - 2 SECTIONS 84 tons TOTAL. EACH KIT DOES INCLUDES: ❖ WAIST BARK BELT CONVEYOR ❖ FEED ROLLERS ❖ SUBSTRUCTURE FOR SUPPORTING FOUNDATIONS, CON ...

Available 5 units of Guascor 360. All the accesories (is complete power plant) are also available but you can only take de engines if you want. Power:500kW YOM:1998´ Hours: 60000 h Generator: Leroy Somer Voltage: 400V

ENGINE RUNNING HRS : 25,916 overhauled 1. ENGINE DETAILS: TYPE : HGM560 SERIAL NO : 350.009 YEAR OF MANUFACTURING : 2009 DATE : 15/07/2009 RATED POWER : COP 1200 KW POWER FACTURE : 1 MAX ALTITUDE OF INSTALLATION : 500 M MAXIMUM AMBIENT TEMP : 25 C RATED FREQUENCY : 50 HZ RATED VOLTAGE : 400 V RATED CURRENT : 1,732 A MASS : 11,735 KG PERFORMANCE CLASS : G2 2. GENERATOR DETAILS: MAKE : LEROY SOMER ALTERNATORS PARTNER LSA : C 50.2VL10B C 6S DATE : 09/27 SERIAL NO : 238666/ 1 FREQUENCY : 50 HZ SPEED : 1500 RPM PROTECTION : IP23/4 POWER FACTOR : 0.80 INSULATION CLASS : F A.V.R : R448-V50 + 7AREP ALTITUDE : < 1000 M MASS WEIGHT : 3300 KG DE BEARING : 6226 OU NDE BEARING : 6320 OU C GREASE : ESSO UNIREX N3 EXCITATION FULL LOAD : 37.80 V / 2.97 A EXCITATION NO LOAD : 0.78 ACCORDING TO IEC 60034-1 3. HEAT EXCHANGER DETAILS: MAKE :  ...

Printshop Package from one place in poland: 1. 8 up Violet CTP Heidelberg Prosetter 102 - Type 2170 - ID No. 05805023 - date of production: March 2004 - efficiency: 12 plates in B1 format/h (2400 dpi) - in the beginning of 2017 new laser mirror set - current counter below (from CTP User Interface) 2. Developer Glunz & Jensen Raptor PRO 85P - model MP 85 - date of production: April 2005 - the set consists of cooler E04535 - new pre-heating rubber and silicone rollers in July 2017 - up-to-date exchange of spare parts (gears, roll mounting) 3. Stacker for AGFA boards - Type ST 125SX - May - 05/2012 4. Additional second CTP imagesetter to be sold for parts - Heidelberg Prosetter 102, D-69115 - Type 2170 - ID No. 05805023 - date of production: August 2005 - the imagesetter does not include: engines, sliders and laser mirror set (head) 5. The set consis ...

Actuator Heinzmann for engines MWM TCG 2020, type StG 30-01 for Basic System E30.

Genuine INNIO Jenbacher spark plug,, the manufacturer's specific choice for Jenbacher Series 6 gas engines (J612, J616, J620, J624). This M18 spark plug, typically based on Iridium/Platinum technology , is designed to ensure the most reliable ignition, maximum performance, and extended maintenance intervals for your Jenbacher engine. It ensures optimal combustion and contributes to the overall efficiency of the plant.

FOR SALE. USED 320 CYLINDER HEADS. FIRST TIME OF THE ENGINE. THESE HAVE NOT BEEN RECONDITIONED BEFORE AND ARE READY TO BE RECONDITIONED AND USED AGAIN. NO CRACKS, NO DAMAGE. IN VERY GOOD CONDITION AND CLEAN AND PRESSURE TESTED. WE HAVE 40 PCS. PRICE ON REQUEST. EX-WORKS UK WE ALSO HAVE 320 BLOCK, CRANK SHAFT-2 PCS IN EXCELLENT CONDITION AND MANY OTHER USED 320 PARTS FROM DISMANTLED/DECOMMISSIONED ENGINES.

For Sale: 2 Units Jenbacher 320 – Containerized with Cooler and Silencer We are offering two Jenbacher 320 gas engines, fully containerized and ready for deployment. Each unit comes complete with cooling systems and silencers. General Specifications: Model: Jenbacher JMS 320 Included: Container housing Cooling system Exhaust silencers

Complete 10MW Jenbacher 6 Series natural gas power plant. These engines have been maintained by the official Jenbacher distributor. Capacity: 10MW Fuel: Natural Gas Year: 2001 Hours: 12,000 - 14,000 V: 11,000 HZ: 50 Scope of supply: 3 x Jenbacher J620GSE01 11Kv 12,100 - 14,100hrs 1 x Jenbacher J616GSE01 11Kv 14,000 4 x external cooling tables 4 x upgraded Comap control panels 4 x engine cell ventilation including louvres and filters 4 x 500L 3-4 Barg gas compressors Hawker Siddeley 11Kv switch board (one per gen plus main) 11/33 15MVA export transformer 11/414 import transformer Waste and fresh oil tanks Plus all other controls and cabling .

USED Jenbacher cylinder heads for 6 series engine. In good condition and ready for refurbish. FOR E TYPE 6 series engine Email for price and delivery. Currently in stock. Ex-UK

A complete power plant consisting of 3 JEBANCHER units is now available. Below are the details: 2x Engines Model J616C - Power: 2519 kVA (2.519 MW each) - Overhauled (E60) in 2011 - Operating hours since overhaul: 20,503 hours - Manufacture date: 1997 - Serial numbers: 1200959 / 1200956 1x Engine Model J320 GS S04 - Power: 1366 kVA (1.366 MW) - Overhauled (E60) in 2011 - Operating hours since overhaul: 19,059 hours - Manufacture date: 1997 - Serial number: 1200954 Total power capacity: 2 x 2.519 MW + 1.366 MW = 6.404 MW Scope of supply includes: - XT3 Diane control panel - GEC ALSTHOM transformers: 3 units (2x 2500 kVA, 1x 1600 kVA) - Gas line - Heat exchanger - Smoke exchanger - Pumps - Table cooler (radiators) - Oil tank Location: Paris, France For more information, please feel free to contact us.

3 x Used Gas Generator Set JENBACHER Type: J 320 GS B02 / B05. With Control Panel and all standard accessories. two engines have been overhauled. 1x Motor KW / RPM: 852 / 1500 2x Motor KW / RPM: 1034 / 1500 --- Volts: 400/231 --- Hz: 50 --- Brandstof: Natural Gas --- Generator Type: Stamford --- Bouwjaar: 1996 / 1997 --- Draaiuren stand: 52.000 ---- We are located in the Netherlands (Province South Holland). In our stock we have more gas and diesel generators. For more information please feel free to contact us. You can call our language lines and speak to someone in one of the languages we support. Tel: +31 (0)6-22497850 George Modderkolk / Manager ( Dutch, English ) +31 (0)6-38639071 Leon Hensen / Sales ( Dutch, English ) Modderkolk Horti Services Gas Power Holland