used Feed Automatics for sale

AVIA AVIATURN 35 CNC turning center was built in 2022 in Poland. The machine, designed for precision machining of workpieces with a maximum diameter of 350 mm, has been equipped with many state-of-the-art solutions and high-quality components that ensure excellent turning results. The workspace includes, among others, a 12-position turret and a reliable spindle driven by a belt drive with encoder. The AVIAturn 35 CNC lathe is also distinguished by its richly ribbed, single-piece cast iron bed. The bed, which is inclined at 35°, effectively dampens all vibrations and oscillations, resulting in, among others, improved workpiece surface quality and increased cutting tool life. The machine’s extensive equipment includes, among others, a hydraulically movable tailstock, a tool probe and a SIEMENS CNC control in its most powerful version with a wide range of built-in fixed cycles and 16  ...

CAPACITIES AND CHARACTERISTICS CNC Fagor 8055 Retrofitted in 2018 TABLE – CROSS SLIDE • D – Table diameter: 2050 mm • A – Maximum turning diameter: 2300 mm • DB – Normal table height from the floor: 731 mm • H – Maximum machinable height (tool overhang 15 mm): 2000 mm • T – Vertical stroke of the cross slide: 1700 mm • Continuous range of table speeds: 1.6 to 200 rpm • Table motor power: 37 kW • Maximum allowable load on table: 20 tons • Cross slide travel speed: 400 mm/min TOOL CARRIAGE • Section of the tool carriage slide: 224 x 224 mm • C – Travel of the tool carriage slide: 1600 mm • CD – Travel to the right of the table axis: 1305 mm • CG – Travel to the left of the table axis: 400 mm • Continuous feed range: 0.05 to 24 mm/rev • Tool positioning speed: 1 to 3600 mm/min Verniers: • 1 divisi ...

Turning length 1200 mm Turning Ø 700 mm Ø above the bed 700 mm Ø above transversing slide 600 mm Length between centers mm Type of CNC FANUC 18I-TB X-axis 255 mm Z-axis 160 mm Max workpiece weight kg Spindle taper ASA 8″ Spindle bore 95 mm Number of turrets 1 Number of tools on turret 12 Number of rotating tools 12 Turning speed 2800 rpm Spindle motor power 30 kW Tailstock no Bar feeder no ------------------- Length x width x height 5100.0 × 1985.0 × 2086.0 Weight 7000 kg

BIGLIA B56 S2M CNC lathe was built in 1998 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, distinguished by its high precision, reliability and repeatability, is an excellent choice for many industries, such as the automotive and aerospace industry. Workpieces with complex geometries are machined inside a large work space by means of two spindles and two turrets. This solution significantly speeds up production time and reduces machine downtime to a minimum. All this is complemented by the intelligent FANUC CNC control, which allows the creation of advanced machining programmes in just a few steps. The BIGLIA B.56/S2M CNC turning center weighs 6750 kg. Technical specifications of the BIGLIA B56 S2M lathe - CNC controller: GE FANUC Series 18i-T - maximum workpiece diameter: 560 mm - maximum workpiece length: 1000 mm - feed in the X/Z axis: 250/500 mm - number of spindles:  ...

BIGLIA B658 CNC turning center was built in 2008 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, designed for precision machining of workpieces with a maximum diameter of 380 mm, has, among others, a 12-position turret, a reliable spindle and an automatic tailstock. All process parameters, in turn, are programmed in an intuitive FANUC CNC control with many useful functions that facilitate the daily operation of the machine. The BIGLIA B 658 CNC lathe weighs 6000 kg. Technical specifications of the BIGLIA B658 lathe - maximum turning diameter: 380 mm - maximum bar diameter: 80 mm - maximum passage: 620 mm - maximum turning length: 650 mm - feed in the X/Z/B axis: 220/650/660 mm - rapid traverse in the X/Z/B axis: 20/24/12 m/min - spindle rotational speed: 30-3000 rpm - spindle bore diameter: 90 mm - spindle centre height: 1055 mm - front bearing inner diameter: 130 mm ...

BIGLIA B658/B CNC turning center was built in 2009 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, designed for machining workpieces with a maximum diameter of 380 mm, offers excellent precision and repeatability of the produced parts. The machining process is performed inside a large workspace which includes, among others, a powerful spindle, a 12-position turret and an automatic tailstock. All parameters are, in turn, entered in an intuitive FANUC CNC control with many useful functions. The BIGLIA B 658/B CNC lathe weighs 5700 kg. Technical specifications of the BIGLIA B658/B lathe - CNC controller: FANUC Series 21i-TB - maximum turning diameter: 380 mm - maximum bar diameter: 80 mm - maximum passage: 620 mm - maximum turning length: 650 mm - feed in the X/Z/B axis: 220/650/660 mm - rapid traverse in the X/Z/B axis: 20/24/12 m/min - spindle rotational speed: 30-3000  ...

BIGLIA SMART TURN B1200 CNC automatic lathe was built in 2008 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, dedicated to the precise, multi-axis machining of workpieces with a maximum diameter of 580 mm, was created as an effective answer to the daily challenges of modern business. For this purpose, it features modern components with excellent technical characteristics inside a large work space, such as two spindles (main spindle and sub-spindle) and a 40-position tool magazine. The high-speed operation of the tool magazine further significantly speeds up production time and reduces machine downtime to a minimum. The SMART TURN B1200 S CNC turning center is offered with a wide range of equipment, including a bar feeder, Y-axis and FANUC intelligent CNC control. The total weight of the machine is 7000 kg. Technical specifications of the BIGLIA SMART TURN B1200 CNC lathe Gene ...

BOEHRINGER VDF DUS 1000 CNC lathe was built in 1993 in Germany. The machine, designed for machining workpieces with a maximum diameter of 1000 mm, delivers excellent turning results during even the most intensive challenges, thanks to its extremely stable design and reliable components. The spindle is driven by an stepless AC motor, which allows efficient turning in two different, optimally adapted speed ranges. All axes, on the other hand, have powerful servo drives, guaranteeing excellent dynamics and positioning accuracy throughout the machine’s lifetime. This is rounded off by an intuitive SIEMENS CNC control with many functions for easy operation and programming. The BOEHRINGER VDF 1000 DUS lathe weighs approximately 10100 kg. Technical specifications of BOEHRINGER VDF DUS 1000 metal lathe - turning diameter above the bed: 1000 mm - turning diameter over transverse slide: 710 ...

36 mm-5 axis Swiss Cnc lathe with moving bushing - Barload BFG 35 barfeed - 37+50 collets - brand new Mitsubishi motor mod.MR-J2S-70A - Syntec Control

32 mm-5 axis Swiss Cnc lathe with moving bushing - Iemca Boss 332E barfeed new in 2008 - Syntec Control

CINCINNATI HAWK TC-150 CNC turning center which was built in 1999, is used for precision machining of workpieces with a maximum diameter of 300 mm. The machining process is performed inside a large workspace by means of reliable components in the form of cutting tools and a high-speed spindle. This solution, combined with an extremely stable design, results in workpieces of excellent quality and precision. The HAWK TC 150 CNC lathe also features an integrated chip conveyor and an intuitive CNC controller. The total weight of the machine is approximately 3500 kg. Technical parameters of the CINCINNATI HAWK TC-150 lathe - CNC controller: VICKERS ACRAMATIC 2100 - turning diameter (over bed): 300 mm - turning diameter (over saddle): 250 mm - maximum turning length: 500 mm - feed in the X/Z axis: 215/438 mm - maximum spindle rotational speed: 5500 rpm - spindle passage: 51 mm - 12- ...

○CＮＣ 　　CINCOM SYSTEM FS-32iB ○capacity - work piece 　　最大加工径　φ20mm 　　最大加工長　200mm 　　正面最大穴明け径　φ10mm　最大タップ　M8 　　背面最大穴明け　φ8mm　最大タップ　M6 ○ Main Axis 　　正面主軸回転数　10000rpm 　　背面主軸回転数　8000rpm ( rare end ) ○ATC 　　21 tools 　　くし刃　旋削5本＋milling 4 tools 　　正面穴明け　4本 　　背面穴明け　8本 ○motor 　　主軸用　2.2/3.7kw 　　背面用　1.1/1.5kw ○機械の大きさ 　　寸法　幅2540mm＋チップコン719mm×奥行1185mm×高さ2152mm 　　重量　2200kg ○Bar feeder 　　オートバー　Alps　ASR X-20ZCⅡ　 length 3.0m

CITIZEN CINCOM M32 CNC lathe was built in 2003 in Japan by CITIZEN WATCH CO., LTD. The machine, which is a combination of high performance and precision, enables to perform even the most complex machining of workpieces in 8 axes. All machining processes, i.e. precise drilling, threading and turning are performed inside a fully illuminated work area by means of cutting tools taken from 3 tool stations. The high thermal stability bed inside effectively reduces the influence of heat, increasing the service life of all components and tools. The CITIZEN CINCOM M-32 CNC lathe is offered with an extensive range of equipment, which includes, among others, two spindles (main spindle and sub-spindle) and an FMB bar feeder. All this is complemented by an intelligent CNC control, which allows, for example, self-diagnosis of the machine or program backup. The CITIZEN M32 swiss-type lathe weighs 32 ...

CITIZEN M32 V CNC sliding head lathe was built in 2003 in Japan by CITIZEN WATCH CO., LTD. The machine is used for precision 8-axis machining of workpieces of even the most complex geometries. All machining processes, i.e. precise drilling, threading and turning are performed by 2 reliable spindles and tools taken from 3 capacious tool stations. What’s more, the specially designed bed with high thermal stability perfectly reduces the influence of heat, increasing the service life of all components and cutting tools. The offer also includes a wide range of equipment that significantly extends the machine’s machining capabilities and guarantees excellent repeatability of the manufactured parts. This includes e.g. an advanced CNC controller with many useful functions, such as self-diagnosis and program backup. All this makes the CITIZEN M32V swiss-type lathe the best choice for many  ...

CITIZEN M32 V CNC sliding head lathe was built in 2006 in Japan by CITIZEN MACHINERY CO., LTD. The machine, designed for precision machining of workpieces with complex geometries, is distinguished by the use of a number of state-of-the-art solutions aimed at increasing overall production efficiency. These include among others two reliable spindles with C axis and capacious tool stations. What’s more, a specially designed bed with high thermal stability perfectly reduces the impact of heat, increasing the service life of all components and tools. All this is complemented by an intelligent MITSUBISHI CNC control with many useful functions. The CITIZEN M32V swiss-type lathe weighs 3200 kg. Technical specifications of CITIZEN M32 V CNC lathe General data - maximum turning diameter: 32 mm - turning length in one stroke: 320 mm - maximum turning length: 600 mm - maximum bar length: 3 ...

COLCHESTER TORNADO 100 CNC turning center built in 1995 in England is used for precision machining of workpieces with a maximum diameter of 420 mm. The machine features a large, fully illuminated workspace with a 12-position turret and an extremely powerful spindle. The 60° inclined bed ensures remarkable process stability, even during the most intense challenges. This is completed by the intuitive CNC control in which all machining programmes are created in just a few steps. The TORNADO 100 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 100 metal lathe - CNC controller - HMI panel: VILUX - feed in the X/Z axis: 180/350 mm - rapid traverse in the X/Z axis: 10/15 m/min - turning diameter over bed: 420 mm - turning diameter over slide: 297 mm - maximum turning diameter: 186 mm - maximum turning length: 350 mm - maximum spindle rotational speed: 60 ...

COLCHESTER TORNADO 110 CNC turning center was built in England in 1998. The machine, designed for precision machining of workpieces with a maximum diameter of 420 mm, features a fully illuminated work space that includes among others a 12-position turret and an extremely powerful spindle. The inclined bed by 60° ensures excellent stability of the process, during even the most intense challenges. On top of this, the intuitive GE FANUC Series 21i-T CNC control allows advanced machining programmes to be created in just a few steps. The TORNADO 110 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 110 metal lathe - CNC controller: GE FANUC Series 21i-T - feed in the X/Z axis: 310/416 mm - rapid traverse in the X/Z axis: 15/20 m/min - load on the X/Z axis: 2.51/3.77 kN - turning diameter over bed: 420 mm - turning diameter over slide: 280 mm - maximum tur ...

Manufacturer DAEWOO Model PUMA 2000 SY Year 2003 CNC FANUC 18i – T Capacities Swing over bed 600 mm. Swing over saddle 550 mm. Max. turning diameter 330 mm. Max. turning length 510 mm. Travels and feeds X Axis Traverse 250 mm. Z Axis Traverse 580 mm. Y Axis Traverse 100 (±50) mm. B Axis Traverse 580 mm. Rapid feed X Axis 20 m/min. Rapid feed Z axis 24 m/min. Rapid Traverse Y 7,5 m/min Rapid Traverse B 20 m/min. Main Spindle C Axis INCLUDED C Axis index 0.001 º Through hole Ø 76 mm Nose A2#6 Main Spindle Speed Ranges 4.500 rpm. Main Spindle motor power 15 kW Sub-spindle C Axis in sub-Spindle INCLUDED C Axis index 0.001º Sub Spindle through hole Ø 45 mm Sub Spindle Speed Ranges 6.000 rpm Sub Spindle motor power 7.5 kW Turret and driven tools Nº of Station 12 Tool Size 25 mm Turret Indexing Time 0.1 s Living Tool Speed 5.000 rpm. Rotary tool  ...

Manufacturer DAEWOO Model PUMA 2000 SY Year 2003 CNC FANUC 18i – T Capacities Swing over bed 600 mm. Swing over saddle 550 mm. Max. turning diameter 330 mm. Max. turning length 510 mm. Travels and feeds X Axis Traverse 250 mm. Z Axis Traverse 580 mm. Y Axis Traverse 100 (±50) mm. B Axis Traverse 580 mm. Rapid feed X Axis 20 m/min. Rapid feed Z axis 24 m/min. Rapid Traverse Y 7,5 m/min Rapid Traverse B 20 m/min. Main Spindle C Axis INCLUDED C Axis index 0.001 º Through hole Ø 76 mm Nose A2#6 Main Spindle Speed Ranges 4.500 rpm. Main Spindle motor power 15 kW Sub-spindle C Axis in sub-Spindle INCLUDED C Axis index 0.001º Sub Spindle through hole Ø 45 mm Sub Spindle Speed Ranges 6.000 rpm Sub Spindle motor power 7.5 kW Turret and driven tools Nº of Station 12 Tool Size 25 mm Turret Indexing Time 0.1 s Living Tool Speed 5.000 rpm. Rotary tool  ...

DMG CTX 310 ECO CNC lathe was built in 2011. The machine, characterised by high productivity and precision, is designed for machining workpieces with a maximum diameter of 200 mm. The machining process is performed inside a large working area using reliable components in the form of a high-speed spindle and cutting tools. During the turning process, a specially designed inclined bed effectively eliminates any vibrations and oscillations, ensuring the highest possible process stability. The offered DMG GILDEMEISTER CTX 310 Ecoline CNC turning center also features an integrated chip conveyor and a perfectly optimised SIEMENS CNC control. The total weight of the machine is 3400 kg. Technical data of the DMG CTX 310 ECO turning center - maximum turning diameter: 200 mm - maximum swing diameter: 330 mm - maximum swing diameter above cross guideway: 260 mm - feed in the X/Z axis: 160/45 ...

DMG CTX 510 ECO CNC turning center built in 2011 is used for precision machining of workpieces with a maximum diameter of 465 mm. This extremely efficient and perfectly optimised machine features a specially constructed, inclined bed that effectively dampens all vibrations and oscillations. This solution ensures the highest possible process stability, bringing results such as improved workpiece surface quality or increased cutting tool life. Workpiece machining is carried out using reliable components in the form of a high-speed spindle and cutting tools taken from a 12-position turret. Tools are changed in a very short time, so that the overall process time is significantly reduced. The DMG GILDEMEISTER CTX 510 ECO CNC lathe also features an intuitive SIEMENS CNC control and an integrated chip conveyor. The total weight of the machine is 7800 kg. Technical parameters of the DMG CT ...

DMG GILDEMEISTER CTX 410 CNC lathe built in 2006 is an extremely powerful machine designed for precision machining of workpieces with a maximum diameter of 320 mm. The machining process is performed inside a large, fully illuminated workspace using reliable components in the form of cutting tools and a high-speed spindle. The specially designed inclined bed effectively dampens all vibrations and oscillations, resulting in better quality of the machined surface and increased tool life. The offered DMG CTX 410 CNC turning center is also equipped with an integrated chip conveyor and a perfectly optimised, intuitive HEIDENHAIN CNC control. The total weight of the machine is approximately 6000 kg. Technical specifications of the DMG GILDEMEISTER CTX 410 turning center - CNC controller: HEIDENHAIN - turning diameter: 320 mm - turning length: 600 mm - feed in the X/Z axis: 250/635 mm -  ...

DMG GILDEMEISTER CTX 510 CNC turning center was built in 2008. Designed for machining workpieces with a maximum diameter of 465 mm, the machine features a fully illuminated workspace, a high-speed spindle and high-end cutting tools. The extremely stable design combined with the perfectly optimised SIEMENS CNC control ensures maximum process efficiency, even during the most intensive production work. The DMG CTX 510 CNC lathe weighs 7500 kg. Technical specifications of the DMG GILDEMEISTER CTX 510 lathe - maximum turning diameter: 465 mm - maximum swing diameter: 680 mm - maximum swing diameter above cross guideway: 465 mm - feed in the X/Z axis: 300/1050 mm - rapid traverse in X,Z axis: 30 m/min - maximum spindle rotational speed: 3500 rpm - spindle passage: 76 mm - spindle drive power (40%/100% DC): 42/31 kW - operating hours: 13902 h - installed power: 50 kVA - power supp ...

DMG GILDEMEISTER CTX ALPHA 300 CNC turning center was built in 2008. The machine, designed for machining workpieces with a maximum diameter of 500 mm, is equipped with state-of-the-art technical solutions that guarantee extraordinary accuracy and precision. Machining is performed inside a large, fully illuminated workspace by a reliable spindle and high-quality cutting tools taken from a 12-position turret. In turn, the operator is provided with a state-of-the-art touchscreen control panel with a perfectly optimised FANUC CNC controller. High reliability, precision and structural stability make the GILDEMEISTER CTX ALPHA 300 CNC lathe the perfect choice for even the most intensive production work. The total weight of the machine is approximately 4350 kg. Technical data of the DMG GILDEMEISTER CTX ALPHA 300 lathe - maximum turning diameter: 500 mm - maximum cutting diameter: 200 mm  ...

Machine Details Stock-No. 1105-04033 Type of machine CNC Turning- and Milling Center Make DMG MORI Type CTX beta 800 Year of manufacture 2009 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time IMMEDIATELY Freight basis ex site Technical details turning diameter max. 390 mm turning length 800 mm control Sinumerik 840D sl Siemens Greates Pass Round Over Bed 700 mm Turning Speed Range - Main Spindle 20 - 4,000 min/-1 Power capacity - main spindle 45 / 35 kW max. torque 700 Nm C-Axis 360° Spindle Nose 220H5 Chucking diameter - mm max. bar capacity 102 mm number of toolpositions 12 pos. Number of driven toolspositions 12 pos. power capacity driven tool-stations 14.2 kW Spindle speed - driven tool stations 40 - 10.000 min -1 tool taper VDI 40 DIN69880 max. torque 34 Nm X-AXIS 290 mm Z-AXIS 800 mm rapid traverse X: 30 / ...

DMG MORI CLX 350 CNC turning center manufactured in 2017 is used for precision machining of workpieces with a maximum diameter of 610 mm. In order to meet even the most intensive production challenges, the machine uses high-quality components and modern solutions. Inside the large working area, there is a specially designed inclined bed that dampens any vibrations and oscillations generated during machining. This solution results in, among others, a better quality of the machined surface or an increased service life of the cutting tools. To this date, the DMG MORI CNC lathe has only worked for 4611 hours. The total weight of the machine is approximately 4700 kg. Technical data of the DMG MORI CLX 350 lathe - maximum turning diameter: 320 mm - turning diameter (over the bed): 610 mm - turning diameter (over cross sledge): 400 mm - turning length: 530 mm - feed in the X/Z axis: 242 ...

CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Y-axis travel mm: 100 Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Spindle bore mm: 73  ...

SWING OVER BED.. 30.3 SWING OVER SADDLE... 23.2 MAXIMUM TURNING LENGTH.. 41 SPINDLE BORE / BAR WORKING DIAMETER. 5.2 / 4.6 SPINDLE SPEED... TO 2,000 RPM SPINDLE NOSE A2 #11 RAPID TRAVERSE (X/Z AXIS)... 630/790 IPM MAXIMUM CUTTING FEEDRATE 19.7 IPR TURRET.. 12 POSITIONS TAILSTOCK QUILL DIAMETER 4.7 QUILL TRAVEL 4.7 MAIN SPINDLE MOTOR.. 50 HP MACHINE DIMENSIONS... 166 X 86 X 89 TALL MACHINE WEIGHT... 21,600 LBS EQUIPPED WITH: FANUC 21ITB CNC CONTROL 2 SPEED GEARED HEAD PROGRAMMABLE TAILSTOCK 18 & 15 3-JAW HYDRAULIC CHUCK CHIP CONVEYOR

SWING OVER BED.. 30.3 SWING OVER SADDLE... 23.2 MAXIMUM TURNING LENGTH.. 41 SPINDLE BORE / BAR WORKING DIAMETER. 5.2 / 4.6 SPINDLE SPEED... TO 2,000 RPM SPINDLE NOSE A2 #11 RAPID TRAVERSE (X/Z AXIS)... 630/790 IPM MAXIMUM CUTTING FEEDRATE 19.7 IPR TURRET.. 12 POSITIONS TAILSTOCK QUILL DIAMETER 4.7 QUILL TRAVEL 4.7 MAIN SPINDLE MOTOR.. 50 HP MACHINE DIMENSIONS... 166 X 86 X 89 TALL MACHINE WEIGHT... 21,600 LBS EQUIPPED WITH: FANUC 21ITB CNC CONTROL 2 SPEED GEARED HEAD PROGRAMMABLE TAILSTOCK 18 & 15 3-JAW HYDRAULIC CHUCK CHIP CONVEYOR

Turning diameter: 550 mmTurning length: 513 mmTurret positions: 12CNC Brand: FanucCNC Model: 21 i Tb Make Doosan PUMA Type 240 MB Year 2007 FANUC 21i TB Doosan Puma 240 MB Centre height (mm) Swing = 550 Center distance (mm) DBC = 513 Spindle bore Bore = 76 ATC 12 Position Speeds 4500 / 11 kW Live tooling 5.5 kW / 5000 Rpm Bar feeder IEMCA 65 mm Bar feeder interface Chip conveyor 7 Bar Coolant Tool eye Tool Gripper Tool managment  

Turning diameter: 500 mmTurning length: 450 mmTurret positions: 12CNC Brand: FanucCNC Model: 21 i Tb Make Doosan S310NM Type S 310 NM Year 2007 / 3412 Hours ! Doosan s310 NM with Fanuc 21 iTB Centre height (mm) Swing = 500 Center distance (mm)DBC = 450 Spindle bore CNC Fanuc 21 iTB Live tooling ATC 12 positions Bar feeder LNS servo speed Chip conveyor + Tool eye Doosan S310 NM CNC Lathe  

equipped with Top Automazioni Fusion 350 barfeed new in 2021, Lns Turbo HB chip conveyor, well tooled, Doosan-Fanuc i-Plus iHMI Control, IMMEDIATELY AVAILABLE.

Dimensions: - Length: 2311.4 mm - Width: 1600.0 mm - Height: 1655.0 mm - Weight: 2900.0 kg Turning Specifications: - Turning Length: 305.0 mm - Turning Diameter: 320.0 mm - Diameter Above the Bed: 510.0 mm - Diameter Above Transversing Slide: 290.0 mm - Length Between Centers: 23.0 mm Axis Movement: - X-axis Travel: 175.0 mm - Z-axis Travel: 330.0 mm Workpiece Capacity: - Maximum Workpiece Weight: 130.0 kg Spindle Details: - Spindle Bore: 53.3 mm - Spindle Motor Power: 15.0 kW - Turning Speed: 6000.0 rpm Tooling: - Number of Turrets: 12 - Number of Tools on Turret: 12 - Number of Rotating Tools: 12 Common Applications: The Lynx 220LC is widely used in precision machining industries for producing complex components with high accuracy. It is suitable for manufacturing parts in automotive, aerospace, and general engineering sectors. Turning length 305 mm Turni ...

Less than 300 hours, It is equipped with 12″ Chuck, Tool Presetter, Tailstock ,Chip Conveyor. On Our Floor fully powered / tested & is in Great working condition.” Doosan Puma 300LC Equipped With: Fanuc i series CNC Control Box way construction Rigid Tapping 12″ 3 Jaw Hydraulic Chuck A2-11 Spindle Auto Tool Presetter Hydraulic Programmable Tailstock and Quill PCMCIA Card Slot Coolant System Barfeed Interface 12 Station Automatic Turret Foot Switch Turbo Chip Conveyor General: Power: 45 kva, 220v / 3-Phase Overall Dimensions: 150″ x 77″ x 80″ High Overall Dimensions: 168″ x 77″ x 80″ High with Chip Conveyor Weight: 15000 lbs Doosan Puma 300LC Specifications: Capacity: Max Turning Diameter: 15.7″ Max Turning Length: 50.4″ Max Bar Capacity: 4.05″ Swing Over Bed: 22.4″ Distance Between Centers: 52.8″ X Axis Travel: 11.1″ Z Axis Travel ...

SWING OVER THE BED.. 30.3 SWING OVER SADDLE... 23.2 DISTANCE BETWEEN CENTERS 44.7 MAXIMUM TURNING LENGTH.. 38.5 SPINDLE BORE / BAR WORKING DIAMETER. 5.2/ 4.6 SPINDLE SPEED... 20 TO 2,000 RPM SPINDLE NOSE A2 #11 C-AXIS INDEX ANGLE.. 0.001 DEGREES RAPID TRAVERSE (X/Z AXIS)... 630/790 IPM MAXIMUM CUTTING FEEDRATE 19.7 IPR TURRET.. 12 POSITIONS ROTARY TOOL MOTOR... 15 HP ROTARY TOOL SPEED... 3,000 RPM TAILSTOCK QUILL DIAMETER 4.7 QUILL TRAVEL 4.7 MAIN SPINDLE MOTOR.. 50 HP MACHINE DIMENSIONS... 166 X 94 X 89 TALL APPROXIMATE MACHINE WEIGHT.. 21,400 LBS EQUIPPED WITH DOOSAN FANUC i SERIES CNC CONTROL 2 SPEED GEARED HEAD PROGRAMMABLE TAILSTOCK 20 3-JAW SMW AUTO BLOK CHUCK TOOL SETTER LNS MODEL MF-2 CHIP CONVEYOR 4 LIVE HOLDER (2) RADIAL (2) ANGLE

Doosan Puma TT1800SY-GL Universal Turning Center Hersteller [manufacturer]: Doosan Infrcore Type [ type]: Puma TT1800SY-GL Control unit: Fanuc Series 31i-Model A Incl. handwheel Baujahr[construction year]: 08/2012 Incl. Handling – Line Portal – Robotics Powered tools Spindle Turret Guide in the X-axis is in need of repair, defective! Operating hours: approx. 29,500h Travel path: X= 1500mm Y=500mm Z=450mm Workbench: L = 1800mm W=500mm Spindle [spindle]: swivel +-90° Feed speed [feed speed]: 10-4000mm/min Spindle rotation speed: 30-3000 rpm Feed force [feed force]: 10,000-15000N Tool holder: SK 50 after DIN2080 Weight: 11.500kg Approx. (W x D x H): 4.1m x 5.1m x 2.5m Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Con ...

Machine Details Stock-No. 1105-04053 Type of machine CNC Lathe Make DOOSAN DAEWOO Type PUMA GT 2600 L Year of manufacture 2021 Type of control CNC Storage location HAGUENAU Country of origin KORREA Delivery time immediately Freight basis ex site , loaded free Price Technical details turning diameter 780 mm turning length 1280 mm control FANUC i SERIES turning diameter over bed slide 630 mm centre height 350 mm spindle motor 26/22 kW spindle turning speed range 3500 rpm Chucking diameter 254 mm Feed - Longitudinal/Cross 24 mm/min rapid traverse: longitudinal and cross 36 mm/min max. workpiece weight between centres 1500 kg total power requirement 45 kW weight of the machine approx. 7.3 t dimensions of the machine approx. 7 X 2.5 m Additional information - CNC fanuc i series ONLY 2 AXIS MACHINE - Tailstock - automatic tool measuring device with swivel arm  ...

DORRIES-SCHARMANN VCE2000/180MC-FC CONTUMAT Description: High-Production Live-Spindle/C-Axis Vertical Turning Lathe with full set of D-S milling heads, including angular head and probing device. Also equipped with 3 x 1250mm diameter 4-jaw pallet chucks and shuttle system. The pallet change system is for ultra-high volume production and may or may not be involved with the machine. Manufactured/Supply Date: 2002 ONLY 1.5 YEARS RUNNING TIME FROM NEW! Condition: Excellent Control: Siemens 840D Full Documentation: Yes Specification: Table diameter 1800mm (70.86”) with 4 x independent jaws Swing 2000mm (78.74”) Working height 2451mm (96.50”) Crossrail traverse 900mm (35.43”) in increments of 100mm (3.94”) Crossrail traverse speed 425mm/min Crossrail saddle cross feed rate 18m/min Ram section 250x250mm (9.84x9.84”) Ram traverse 1500mm (59.06”) Saddle trav ...

Center height: 0 mmCenter distance: 4000 mmSpindle bore: 130 mm Make EST Ticino 52 Type ET BM 520 / 3000 Year 1991est ticino sliding bed lathe universal schiebebett Centre height (mm) Swing bed = 1.040 Center distance (mm) Swing gap = 1.780 Spindle bore DBC = 3.000 / 4.000 Gap L = 500 2 Axis SONY dro2 Fixed steady rest- Optional CJM chuck 1.500 mm - Feeds all directions - Bore 130 mm  

Center height: 0 mmCenter distance: 2000 mmSpindle bore: 130 mm Make EST Ticino 71 Type ET 350 Year 1986 Universal turning lathe Centre height (mm)Swing = 710 Center distance (mm)DBC = 2000 Spindle boreBore = 130 Philips 2500 Dro 4 chuck = 600 mm 3 chuck = 315 mm Multific TIPO C Feeds  

Manufacturer GEMINIS Model GHT-5 G2 1000×4000 Year 2.007 CNC FAGOR 8055 TC/C Max.Swing Over Bed Ø 1.000 mm. Max. Swing Ø 1.000 mm. Max Swing Over Cross Slide Ø 680 mm. Distance Between Centres 4.000 mm. Rapid Feed X, Z Axis 8 m/min Turning Speeds 0-1400 rpm Automatic Speed Ranges 4 Main Spindle Motor Power 37 kW. Spindle Nose DIN-55026-B11 Turret Positions 4 Turret Type SAUTER 300 X 300 C Axis INCLUDED Ready for installation Milling Head with Y Axis ((±50 mm). Installation in carriage INCLUDED Ready to installation of grinding head INCLUDED 3 Jaw universal chuck Ø500 mm. INCLUDED 4 Jaw independent chuck Ø700mm. INCLUDED 3 support steady rest 70-410 mm. INCLUDED Mobile steady rest 40-160 mm. INCLUDED Longitudinal chip conveyor INCLUDED High pressure pump 6 bar INCLUDED 25 Tool Holder ( Capto Type) INCLUDED 10 set of Jaws for Universal Chuck 3 Jaws INCLUDED  ...

Manufacturer GEMINIS Model GHT-5 G2 1000 x 9000 Year 2.007 CNC HEIDENHAIN 4110 MANUAL PLUS Capacities and feeds Max. swing over Bed Ø 1.000 mm. Max. swing Ø 1.000 mm. Max swing over cross slide Ø 680 mm. Center height 500 mm. Distance between centres 9.000 mm. Rapid feed (X/Z) 8 m/min Main Spindle Turning speeds 0-1400 rpm Quill travel 102 mm. Spindle nose DIN-55026 -B11 Spindle automatic ranges 4 Main spindle power 37 kW Turret Turret positions 8 Turret type VDI 50 (Ø 470 mm) Driven tools power 5.5 kW Tailstock Tailstock quill travel 300 mm Ø tailstock quill 140 mm Max weight between centres Without steady rest 4.800 kg With 1 steady rest 5.500 kg With 2 steady rests 6.200 kg Extra Equipment C Axis and driven tools INCLUDED 1 Axial driven toolholder INCLUDED 2 radial driven toolholders INCLUDED 25 tool holders (VDI 50) INCLUDED 10 set of Jaws  ...

GILDEMEISTER GLD 20 5A CNC sliding head lathe was built in 2001 in Italy by GILDEMEISTER Italiana S.p.A.. The machine is designed for even the most complex machining of workpieces with complex geometries. In order to achieve maximum precision, the workspace is equipped with many reliable components of excellent technical specification. These include among others two high-speed spindles and a rapid, 7-position turret. Daily work, on the other hand, is facilitated by the intelligent FANUC CNC controller, which has an intuitive interface and many useful functions. The offered GLD 20-5A swiss-type lathe weighs approximately 2000 kg. Technical specifications of the GILDEMEISTER GLD 20 5A CNC turning center General data - number of axes: 5 - maximum turning diameter: 20 mm - minimum turning diameter: 3 mm - turning length: approx. 70 mm - rapid traverse in all axes: 12 m/min - maximu ...

GILDEMEISTER MF twin 65 CNC lathe was built in 2000 in Germany by GILDEMEISTER Drehmaschinen GmbH. This extremely efficient machine is used for precision machining of workpieces with a maximum diameter of 200 mm. The machining process is performed inside a large work space, by means of two spindles and tools taken from two 12-position turrets. This solution maximises production efficiency by enabling simultaneous workpiece machining on both spindles. What’s more, any vibration or oscillation is eliminated by a rigid bed, guaranteeing high process stability even during the most intense challenges. The MF twin 65 CNC turning center, including the control cabinet, weighs approximately 6500 kg. Technical specifications of the GILDEMEISTER MF twin 65 CNC dual-spindle lathe General data - number of axes: 4 (X1,X2,Z1,Z2) - swing over bed: 240 mm - maximum turning diameter: 200 mm - ma ...

GILDEMEISTER TWIN 65 CNC automatic lathe was built in 2005 in Germany by GILDEMEISTER Drehmaschinen GmbH. The machine is used for precise, multi-axis machining of workpieces with complex geometries. To increase overall production efficiency, a combination of two spindles and two 12-position turrets with excellent technical specifications are used inside the large working area. Both spindles feature a C-axis with a high indexing accuracy of ± 0.002 mm, which facilitates complex machining operations that require precise positioning of the workpiece. All this is complemented by an intelligent SIEMENS CNC control with an intuitive interface. The GILDEMEISTER CNC turning center weighs 10000 kg. Technical specifications of the GILDEMEISTER TWIN 65 CNC lathe General data - number of axes: 8 (X1, X2, X3, Y1, B, Z1, Z2, Z3) - feed in the X1/X2/X3 axis: 300/180/175 mm - feed in the Y1/B ax ...

bar capacity 90 mm - 2x12 driven positions turrets - Y axis in upper turret - tail stock - very very well equipped ( 36 driven + 39 fixed tool holders - 30 collets etc.etc.) - Lns Sprint S2 barfeed with front magazine - Siemens 840D Power Line Control - IN PERFECT CONDITION

Manufacturer GURUTZPE Model A-1200 4G CNC Year 2008 CNC SIEMENS 840 D Capacities and feeds Centres height 600 mm. Distance between centres 5,000 mm. Cross slide travel 530 mm. Support Guides Number 4 Max. swing over bed 1.170 mm. Max swing over cross slide 950 mm. Rapid feed X/Y axis 10 m/min Main spindle Turning Speeds 20-1,000 rpm Head Automatic Range Number 2 Main Engine Power 51 kW Quill Spindle 260 mm. Turret Turret type SAUTER 0.5.320.032 Turret positions 4 Tool size 320×320 mm. Tailstock Tailstock quill diameter 180 mm. W Axis – Driven tailstock (CNC Managed) INCLUDED Additional equipment 4 Independent jaw chuck Ø 700 mm with chuck hole 280 mm. INCLUDED Hydraulic chuck SHW Autoblock 500GH Ø 500 mm with chuck hole 260 mm. INCLUDED Steady rest SHW Autoblock SLU-5-25 INCLUDED Steady rest capacity 45-310 mm. V Axis – Longitudinal movement Z axi ...

Manufacturer GURUTZPE Model A-1600 2G CNC x 4,000 Year 2008 CNC FAGOR 8055 TC Capacities and feeds Distance between centres 4,000 mm. Center heights 810 mm. 3rd support guide for carriage INCLUDED Bed width 1,090 mm. Max. swing over bed 1.650 mm. Max. swing over cross slide 1.200 mm. Rapid feed X Axis 10 m/min Rapid feed Z Axis 10 m/min C Axis and driven tool INCLUDED Main Spindle Main spindle hole 150 mm. Spindle nose A-15 Spindle speeds 20-800 rpm Head automatic range number 2 Gurutzpe A-1600 CNC 2G x 4000Main Engine Power 68 kW Spindle Maximum Torque 14,600 Nm Turret Turret type Sauter 4 POS Tool Size 360 x 360 mm. Turret Station Number 4 Tailstock Tailstock with CNC driven longitudinal movement INCLUDED Movement of tailstock quill driven INCLUDED Quill Tailstock 180 mm. Turning point of the tailstock MORSE 6 Equipment Milling unit with driven tools ...

SWING OVER BED 62.99 (1600mm) SWING OVER CROSS SLIDE 43(1100mm) SWING IN GAP 75(1905mm) GAP LENGTH 23 (585mm) DISTANCE BETWEEN CENTERS 314.96(8000mm) MAX. WORKPIECE WEIGHT, UNSUPPORTED 30,000 LBS SPINDLE SPEEDS 2.8 - 266 RPM SPINDLE BORE 4.01 BED WIDTH 31.5 LONGITUDINAL FEED RATE .0031 - .23 IPR CROSS FEED .0015 - .11 IPR METRIC THREADING, 96 1 - 300 MM INCH THREADING, 108 .0625 - 30 TPI SPINDLE MOTOR 50 HP APPROX. MACHINE WEIGHT 51,400 LBS MACHINE ELECTRICS 230/3/60 MACHINE FOOTPRINT 447 X 108 MACHINE HEIGHT 100 EQUIPPED WITH: 55 4-JAW CHUCK 4-WAY TOOL POST TAPER ATTACHMENT INCH/METRIC THREADING (2) ROLLER TYPE STEADY REST, 52 & 30

Machine Control Haas CNC with Coldfire Table Size .20 x 10 Machine Travels (X/Y/Z) ..12 x 10 x 12 Spindle To Table Distance ..3.22 - 15.22 Table Capacity .250 Lbs Centered Spindle Taper ..ISO 20 Taper Spindle Speeds .30,000 Max RPM Rapid Traverse Rate (X/Y/Z) ...757 IPM Maximum Cutting Feed Rate .500 IPM Tool Changer Style.Carousel Tool Changer Capacity ...20 Tools Max Tool weight ..5 Lbs. Spindle Drive ...5 HP Vector Drive Power Requirement ...240 Volt, Single Phase, 20 Amps