used Filling and vacuum filling machines for sale

We are selling here a vacuum filler from the manufacturer Frey, type E120 in a very good used and functional condition. The machine runs on 400 volts, 120 litre hopper, LCD control, clipper connection, for filling and portioning, workshop tested, immediately ready for use, dimensions W/D/H 85/60/170 cm, others on request.

We are selling here a sausage filler / piston filler from the manufacturer Frey, type Heinrich 20 / H20 in a good used and functional condition. The machine runs on 400 volts, 20 litres capacity, for filling and portioning, completely stainless steel, workshop tested, immediately ready for use, dimensions W/D/H 55/60/106 cm, others on request.

Frey OSCAR 20 Piston Filler used Machine is equipped with two rollers that allow manoeuvring with the toggle lever folded out It comes from an insolvent company, the piston with gasket, union nut, piston wrench and piston screw could not be found during the dissolution and were therefore reordered, see pictures. The machine is completely made of stainless steel (body, cylinder, piston and cover) and is in the same condition as it was returned by the customer, so it must be thoroughly cleaned before use Video about test run available

Type: F-222 Serial number: F222T1112200SA Year of construction: 2012 Pump capacity: up to 6200 kg/h Hopper: 300 litres Filling pressure: max 50 Bar Grinding head: WK132, 130 mm Power: 3 x 400V, 50Hz, 15.1kW Dimensions: 1300 x 1950 x 2050 mm Weight: 1020 kg For filling, portioning and grinding With lifter for 200L tote bins Frey minced meat portioner Type: C-Linie CLB CAN Serial number: CLB 126495 Year of construction: 2015 Capacity: max 75 portions/min Belt width: 290 mm Compressed air: 6 Bar Power: 230VAC, 50Hz, 0.5kW Dimensions: 2000 x 500 x 1500 mm Frey burger former Type: DMFB90 Serial number: DMFB90 123222 Year of construction: 2013 Capacity: max 150 portions/min Diameter: max 90 mm Belt width: 290 mm Compressed air: 6 Bar Power: 230VAC, 50Hz, 0.3kW Dimensions: 1850 x 800 x 1250 mm

Manufacturer: Handtmann Intestinal Holding Device Type 60-6 ( for long filling tube ) for filling machine HANDTMANN VF 50, 80, 100, 200, 300 i all VF 600 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60

Height 2120 mm Width 1580 mm Length 2250 mm Weight 1600 kg Capacity 3600 kg/h Power supply: 400V 50Hz 3N Total power 6 kW Main Material Stainless steel, acid-resistant Hopper capacity 240 l Loading Loading integrated into the machine Sausage wrapper Comes complete with the machine Product Administration Method Vane Rotor Stuffer Type Vacuum Stuffer

Vacuum filler Manufacturer: Handtmann Model: VF 620 Efficiency: up to 6000kg/h Electric power: 8kW Voltage: 400V 50Hz 3N Filling pressure: up to 40bar Portion range: 5-100.000 g Hopper capacity: 90/240 liters Dimensions: 1350x1950x2100mm Weight: 1400 kg

Height 1950 mm Width 1800 mm Length 1500 mm Weight 1400 kg Power supply: 400V 50Hz 3N Total power 18 kW Loading Loading integrated into the machine Description Vacuum filler Handtmann VF 622 in a set with a grinder GD 93-3

Vacuum filler Manufacturer: Handtmann Model: VF 628 Efficiency: up to 6000kg/h Electric power: 18kW Voltage: 400V 50Hz 3N Filling pressure: up to 72bar Portion range: 5-100.000 g Hopper capacity: 200 liters Dimensions: 2200x1350x2100mm

Vacuum filler Manufacturer: Handtmann Model: VF 628 Efficiency: up to 6000kg/h Electric power: 18kW Voltage: 400V 50Hz 3N Filling pressure: up to 72bar Portion range: 5-100.000 g Hopper capacity: 200 liters Dimensions: 2200x1350x2100mm

STUFFER + PORTIONER WITH SAUSAGE HANGER, HANDTMANN Technical description: Stuffer type: Handtmann VF100B Portioner type: Handtmann AL 242-01 Hanger type: Handtmann 242-16 Power supply: 380-440 V / 50-60Hz https://youtu.be/ZxAf2uRbDf4

VACUUM STUFFER WITH LOAD LIFTER, HANDTMANN TYPE: VF200B CODE: N80/35 Technical description: Throughput rate: Up to 5.000 Kg/ h Power supply: 380/440 V - 50/60Hz Power: 6,5 Kw Dimensions: 2000 x 1350 x 2200 mm

STUFFER HANDTMANN, TYPE: VF80 AND SAUCE DOSING MACHINE HANDTMANN 6 HEADS Technical description: Stuffer (x2): Handtmann VF 80 (1) ID-1638 TYPE: VF80 10-5N Serial number: 637 Power supply: 380 V, 50 Hz, 9,55 A, 3,55 kW Dimensions: 940 x 900 x 1600 mm (2) ID-1640 TYPE: VF80 N50/35 Serial number: 221 Power supply: 380 V, 50 Hz, 10.85 A, 4 kW Dimensions: 1050 x 700 x 1600 mm Sauce dosing machine, Handtmann ID-1639 Heads number: 6 Dimensions: 2300 x 1050 x 1650 mm

Product Specifications: Brand: Rex Type: RKF130 Capacity: 16 Ah Voltage: 400 Volt Year of construction: 2022 the machine is as new!

- completely stainless design, for dry goods filling, - driven by state-of-the-art servo motor, - electronic control , - the vacuum system is equipped with a humidity sensor, - the filling speed is infinitely variable, - can be operated by knee switch - 90 litre hopper, foldable - with removable feed and cleaning auger, - the conveyor is of paddle-wheel design, stainless steel - possibility of connection to a clipping machine for the associated equipment - equipped with standard accessories. - Loading capacity: max. 3.000 kg/hour - integrated computer for control and regulation, - 99 program positions foil stowage, full water protection, - dosing from 1 to 99.999 grams, - automatic fault indication logic, digital display - dimensions: 1156 x 963 x 1775 mm Total power: 2,6 kW Capacity: 0,55kW, 25m3/hour Voltage, freq ...

Height 1700 mm Width 650 mm Length 900 mm Capacity 50 l Power supply: 400V 50Hz 3N Total power 4 kW Main Material Stainless steel, acid-resistant Loading No loading, it is possible to buy a pillar loading for the machine Product Administration Method Vane Rotor Stuffer Type Vacuum Stuffer

Performance data: - Filling capacity: max. 3.000 kg/hour - built-in computer for control and regulation, - 99 program positions, full water protection, - dosing from 1 to 99.999 grams, - automatic fault indication logic, digital display Technical data: Power: 2,6 kW Capacity: 0,55kW, 25m3/hour Voltage, frequency: 400V, 50Hz, 3 phase Max. filling pressure: 35 bar Reservoir head, complete - Maximum output 400 ppm - 1-10 turns infinitely variable - synchronous drive for the bowel support - with standard accessories and 3 filling tubes.

Used-refurbished equipment 6100 kg/hour capacity 70 bar filling pressure filling/dispensing/storage Features: Straight filling, dosing, pumping Hydraulic trolley lifter integrated in the machine body Reservoir feed Fully stainless self-supporting frame structure 12 touchscreen with foldable protective cover 14 blade rotor 200 storable programs Clip machine connector Hungarian menu Technical data: Filling capacity: 6 100 kg/hour Filling pressure: 70 bar Vacuum pump: 16 m³/h Funnel size: 250 L Dosing: 5-9 999,9 grams programmable in 0,1 gram increments Speed (max): 1000 doses/min Voltage: 400V 3F/50Hz Power: 25 kW Weight: 1400 kg

Straight filling, dosing, pooling trolley extractor 14 blade rotor fully stainless self-supporting frame construction 12 touch screen with fold-down protective cover 200 storable programs clipping machine connector Hungarian menu Technical data: Filling capacity: 6 000 kg/hour Filling pressure: 40 bar Hopper size: 250 L 250 g capacity 250 g capacity 250 g capacity 250 g capacity 250 g capacity 250 g capacity: 5-9 999,9 g programmable in 0,1 g increments Speed (max): 500 doses/minute Voltage: 400 V, 3F/50-60Hz Power: 8 kW Weight: 700 kg

Features: Straight filling, dispensing, pooling Hydraulic trolley lifter integrated in the machine body Fully stainless self-supporting frame construction 12 touch screen with fold-down protective cover 18 blade rotor 200 storable programs Clip machine connector Hungarian menu Optional ballast with reservoir Technical data: Filling capacity: 6 000 kg/hour Filling pressure: 45 bar Vacuum pump: 16 m³/h Hopper size: 250 L Dosing: 5-9 999,9 grams programmable in 0,1 gram increments Speed (max): 1000 doses/min Voltage: 400V 3F/50Hz Power: 11 kW Weight: 1400 kg

The Risco RS4001 Vacuum Filler is a highly efficient and versatile machine designed for use in the food processing industry, particularly for filling and portioning sausages, hamburgers, meatballs, pâtés, and other similar products. The RS4001 features a powerful vacuum system that ensures consistent product filling with minimal air inclusion, which is essential for maintaining product quality, especially in sausages and similar products, it is also equipped with advanced portioning technology that allows for precise control over portion sizes. Technical informations: Hopper capacity: 260l Power: 6.3kW Portioning range: 5-10.000 grams Efficiency: up to 380 portions/min / 6.500 kg/h Dimensions: L: 1950 x W: 1200 x H: 1950mm Weight: 900kg Machine after complete renovation

Hydraulic Piston Filler Manufacturer: Talsa Model: F25s Robust stainless steel construction Lid and piston in solid s/s sheet of great thickness and resistance Easily removable piston Automatic piston decompression Easily accessible speed control Independent hydraulic oil reservoir Volume: 25 liters Capacity: 20kg Electric power: 1.1kW Dimensions: 53x57x124cm

Cyclone for Gutting Machines This cyclone is designed for collecting intestines from Baader 142 Fish Gutting Machine (from several machines simultaneously) or similar machines where waste collection is required using a vacuum. Diameter: 1500 mm, Cylinder height: 1880 mm, Cone height: 530 mm, Total height (with legs): 3440 mm +/- 100 mm (legs are adjustable). Bottom flange: 275 mm outer diameter, 150 mm inner diameter. Connection flanges: 340 mm outer diameter, 215 mm inner diameter.

A sausage production line from VEMAG will be sold Composed of: Vacuum Filler HP10L > Filling capacity, depending on the conveyor element up to 5,700 kg/h > Serving weight: 1-99,000 g (infinitely adjustable) > hopper system: 250 l > total rated power: 10.5 kW at 50/60 Hz Year of construction 2012 Length Portioner LPG208 Servo Year of construction: 2011 Suspension Line AH204 Year of construction: 2011 Intestinal types: natural, collagen, polyamide and peeled casings Caliber: 13 to 40+ mm The line is in good and clean condition. Ready to use.

VACUUM STUFFER, VEMAG ROBBY1, TYPE:134 Technical description: Serial number: 134 0454 Power supply: 220-380 V/ 50-60 Hz, 5.1 Kw Approx. weight: 425 Kg

The MBF with integrated flattening belt was specially developed for shaping handmade burgers, tartare and minced steak. In addition, this machine forms a wide variety of products into balls, discs and sticks. The Verbufa wide conveyor belt forming machine guarantees a high production capacity. In combination with the Handtmann vacuum filling machine and the Verbufa fill flow divider, a very high and consistent weight accuracy is guaranteed. This not only ensures lower costs, but also contributes to more sustainable production. Demonstration machine/demonstration machine of a factory representative

Verbufa Forming Machine with Integrated Flattening Belt (MBF COEX) The latest series of Verbufa COEX forming machines with wide conveyor belt and integrated flattening belt is the solution for a high production capacity of filled products. The MBF COEX machine has been specially developed for the intelligent and efficient shaping and portioning of stuffed products such as potatoes, cheese, meatballs and croquettes. With the integrated flattening belt, this forming machine is also ideal for the production of stuffed burgers. The MBF is available with 2 to 16 product streams and a conveyor belt of 400, 600, 800 or 1000 mm width. Demonstration/demonstration machine of a factory representative

The Verbufa skewer machine is the best solution for the production of (meat) skewers. A skewer is automatically inserted into the dosed meat. Products such as kofte, kebab, cevapcici and meat rolls can be produced easily, cleanly and quickly with this skewer machine. The Verbufa skewer machine is connected directly to the outlet of a Handtmann vacuum filling machine, so that the weight accuracy of the portions is very high. This not only ensures lower costs, but also contributes to more sustainable production. Demonstration/Demo Machine