used Fully automatic belt saws for sale

automatic storage CASSIOLI.

• Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma: o Year 2006 o Working area: 24m x 3150mm o Working condition • Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification o Year 2014 o Working area 30m x 3150mm o Good Condition • 2x Donaldson Aspiration Unit • 50m rails + cutting table

ABB IRB 2400 M2000 robotic machining cell manufactured in 2004 in Switzerland, is equipped with an ABB IRB 2400/16 6-axis industrial robot and an ABB IRC5 controller for the control of the manipulator and peripherals. The machining station has so far been configured and used for milling of allowances after thermoforming workpieces. The high-performance milling robot has an arm with a maximum reach of 1550 mm, capable of handling workpieces weighing up to 16 kg. The industrial robot achieves the best cycle performance thanks to modern technology that automatically optimises parameters and executes the programmed path regardless of speed or operating mode, even after an emergency stop or power failure. The BaseWare OS operating system is used to fully control every aspect of the machine, ensuring the highest machining accuracy is achieved. The robotic milling station is offered with  ...

Technical data: Pan working capacity: 150 Kg. Pan speed: 5 - 15 RPM Pan outside diameter: 48 (1219.2 mm) Pan mouth diameter: 19 (482.6 mm) Base construction: Stainless steel Drive motor: 2 hp 1440 RPM Height: 75 (1917.2 mm) Floor space: 61 x 50 (1548.9 x 1270 mm) Weight: 1550 lb (700 Kg) Advanced Specifications flow tab system: A key feature of the Flowtab system is the unique spraygun, designed by BWI Manesty to improve coating efficiency, reduce operational downtime; and simplify cleaning. The automatic clean-out facility prevents fluid blockages within the nozzle, even during extended production cycles; Even at low atomising pressures, the spray rate and pump speed of the Flowtab can be controlled manually via the portable console or, automatically, from the ACS control console, without adjusting the sprayguns. Noted for their ability to deliver fast, flexible and co ...

ACCUTEX GA 43AL wire EDM machine was built in 2018 in Taiwan. This highly efficient and reliable machine can achieve complex and difficult shapes, making it ideal for the production of precision tools, dies and punches. The traditional drive has been replaced by a direct, closed-loop linear drive system to eliminate backlash and increase cutting capacity by up to 10%, with much lower energy consumption and constant operating temperature. The GA 43AL EDM machine features a state-of-the-art AccuteX CNC control based on a Windows system with touchscreen and compatibility with CAD/CAM software. The controller optimises the machining parameters according to different wire diameters, corner angles, arc radius and workpiece thickness for the best cutting efficiency and accuracy. The wire EDM machine weighs 2800 kg. Technical data of the ACCUTEX GA 43AL wire EDM machine - CNC control: Acc ...

Das Zentren nicht benutzt (Die Pandemie Änderte die Pläne). Das Zentren wurde im Jahr 2020 nach Deutschland gebracht. Accuway Misteiner der besten Hersteller in Taiwan. der Maschinen in die ganze welt liefert Controller Fanuk 0i Spindle speed 10000 rpm Spindle nose taper BT40 Bearing inner diameter 70mm drive system Belt (Direct) X-axis travel 850mm Y-axis travel 550 mm Z -axis travel 150-700 mm Table dimension 1100x600 mm T-slot 5x18x100 Max. weight on table 1000 kg FEED RATES X-axis travel 30 m/min Y-axis travel 30 m/min Z -axis travel 30 m/min Cutting feed rate 12 m/min AUTOMATIC TOOL CHANGE SYSTEM tool magazine capacity 24 pcs Max tool weight  ...

Palletizer ACMI – mod. RASAR P 135 – automatic: Year: 2001 Producer: ACMI -MACHINE IN VERY GOOD CONDITIONS 1) Machine suitable for cartons and packs 2) Automatic pallet loading system 3) Aquifer system provides automatic 4) Perimeter protection 5) machine with wrapper robopack 2001 -MACHINE TOTALLY RECONDITIONED Code R 2

Printingmachine - Four Colour Offset press Make Adast Model Dominant 547P Year 1996 Maximum sheet size 381 x 520 mm (in perfecting mode a little less) Dampening Varn Kompac III Feeder stream feeder - up to 12.000 sheets per hour Perfecting 4-0 / 2-2 Delivery low pile delivery Ink bins INKLFOW remote controlled sliced ink ducts Plate change semi automatic Available Direct

LASER BLM ADIGE COMBO Year 2007, 3500 Watt Rofin DC035 Working area 3000x1500 Automatic loding/unloading . Workable tube dimension : min. 16 mm. max 220. Max tube dimension at loading is 6000 mm. This Combo at the moment is unlicensed for the tube license. The tube software Adige BLM license can be purchased easly. The price of this Combo without tube license is Euro 27.000 The price of this Combo whit the tube software Adige BLM license is Euro 52.000 The laser is visible during daily production in the factory. It is in the North of Italy

Serial Number: 20916 Weight: 0,35 tons Power: 3.7 kW Air pressure: 6- 10 Bar Length mm: 3900 Width mm: 1300 Height mm: 1800 Working height: 1030mm Transport size L x W x H: 3,9 x 1,3 x 1,8 mtr. Min.-max glass size: 100x 100 -800x3400 in mm Condition machine : As good as new Control type: Automatic Electric. Connection: 230 Volt Missing parts: Hotmeld Documentation: Yes Instructions: Yes Electric diagram: Yes Photos/film available: Photos and video available

Adpak Uniblock 712AD Shrinkwrapper and heat tunnel Automatic shrinkwrapper and heat tunnel, sealing bar 750mm, with hold down, tunnel aperture 600mm x 450mm, mobile, 3Ph

Product description: Vacuum lifting device AERO-TIMBER 300/2M3K-St Goods to be transported: wooden planks / wooden beams with a closed (airtight surface) Transport goods Dimensions: from 3000 to 6000 mm Length Transport goods Weight: Max. 120 kg Transport type: horizontal transport Designed for indoor use. Technical data: Load capacity at 60% vacuum: max. 300 kg. When the outer chambers of the suction plate are locked, the load capacity is 120 kg. The middle suction chamber has a width of approx. 80 mm. Length of the main crossbeam: 2200 mm Total height: approx. 725 mm Net weight: approx. 150 kg The device comes without an integrated cable drum or radio control. The vacuum lifting device is controlled by a manual slide valve and hung in a prepared crane. More information about the product at Aero-Lift on the homepage

AEW APC Slicer Automatic slicing machine Uoto 180 slices per minute From 2mm-50mm slice thickness sutable for bone in or bonless product stainless steel

Advantages of Aflatek Air100L: -100l air tank, longer operation. -Multistage air compression. -Powerful 2.2kW belt-driven motor. -Mounted on 4 rubber wheels, portable. Technical data: Power supply , V: 3PH 400V 50Hz Motor Speed, rpm: 2850 Motor power, kW: 2.2 Motor power, HP: 3 Air delivery, L/min: 330 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank capacity, L: 100 Dimensions, (length x width x height), mm: 1180x400x770 Weight, kg: 70 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1200x435x800 Weight, kg: 85 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek Air100V: -100l air tank, longer operation. -Multistage air compression. -Powerful 2.2kW belt-driven motor. -Mounted on 4 rubber wheels, portable. Technical data: Power supply , V: 230 Motor Speed, rpm: 2850 Motor power, kW: 2.2 Motor power, HP: 3 Air supply, L/min: 350 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank , L: 100 Dimensions(length x width x height), mm: 1180x400x770 Weight, kg: 74 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1200x435x800 Weight, kg: 89 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Air300W is multistage reciprocating compressor with up to 8 bar maximum pressure. It has three separate cylinders and powerful 7.5 kW belt drive motor. Excellent for construction sites, service stations and industrial manufacturing plants. Advantages of Aflatek Air300W: -Multistage, 3 cylinder air compression. -Easy to use. -Air filter on each pump. -Large air tank, longer operation time. -Mounted on 4 wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 7.5 Motor power, HP: 10 Air supply, L/min: 1070 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank, L: 300 Dimensions(length x width x height), mm: 1410x500x1110 Weight, kg: 183 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1450x630x1200 Weight, kg: 200 Tracking: Available -Price is with VAT 21% included. Contact us if  ...

Large 500l air tank and 7.5kW belt-driven motor provides long operation time and very high air delivery. Air500W is professional compressor designed for industrial use where high amounts of compressed air is required. Advantages of Aflatek Air500W: -Multistage, 3 cylinder air compression. -Easy to use. -Air filter on each pump. -500l air tank, longer operation time. -Mounted on 4 wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 7.5 Motor power, HP: 10 Air supply, L/min: 1070 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank, L: 500 Dimensions(length x width x height), mm: 1750x800x1300 Weight, kg: 219 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 2000x850x1350 Weight, kg: 262 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free of ...

Advantages of Aflatek AirPro300W: -Large 300l air tank -12.5bar maximum pressure. -Powerful 7.5kW belt-driven motor. -3 cylinder multistage air compression. -Mounted on 4 rubber wheels, portable. Technical data: Power supply , V: 3Ph 400V 50Hz Motor Speed, rpm: 730 Motor power, kW: 7.5 Motor power, HP: 10 Air supply, L/min: 1070 Maximum pressure. Bar: 12.5 Maximum pressure, Psi: 181 Air tank, L: 300 Dimensions(length x width x height), mm: 1330x570x1080 Weight, kg: 178 Shipping details: Packaging: Plywood box on a pallet Dimensions(length x width x height), mm: 1485x590x1125 Weight, kg: 213 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek AirPro500W: -Large 500l air tank -12.5bar maximum pressure. -Powerful 7.5kW belt-driven motor. -3 cylinder multistage air compression. -Mounted on 4 rubber wheels, portable. Technical data: Power supply , V: 3Ph 400V 50Hz Motor Speed, rpm: 730 Motor power, kW: 7.5 Motor power, HP: 10 Air supply, L/min: 800 Maximum pressure. Bar: 12.5 Maximum pressure, Psi: 181 Air tank, L: 500 Dimensions(length x width x height), mm: 1840x600x1130 Weight, kg: 260 Shipping details: Packaging: Plywood box on a pallet Dimensions(length x width x height), mm: 1900x650x1200 Weight, kg: 280 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

AFM TAE 25N CNC turning center was built in 1997 by the Polish company AFM ANDRYCHÓW. The highly efficient machine, which is used for unit or series production, is ideal for any industrial plant with an emphasis on quality and precision. The turning process of workpieces with a maximum diameter of 300 mm is performed automatically in a large work area equipped with a 12-position SAUTER tool head and a reliable spindle. All parameters are porgrammed in the intuitive SIEMENS SINUMERIK 840D CNC controller, which reduces the operator’s need to operate the machine to a minimum. The AFM TAE-25N CNC lathe weighs 4200 kg. Technical specifications of the AFM TAE 25N turning center - working feed of longitudinal slide (X axis): 385 mm - working feed of transverse slide (Z axis): 150 mm - working feed rate range in the X,Z axis: 0-15000 mm/min - rapid traverse in the X,Z axis: 15 m/min - ...

all stainless steel belt width 640 mm natural gas 16 kW 414 kW heat capacity 3 x 400 V gas pressure 30 mbar

Product number: 2739 Type: Afogrill Serial number: G 004A Year of construction: 2007 Heating: natural gas, 100 mBar Heating power: 216 kW Burners: 3 x 1000 mm Power: 3 x 400V, 50Hz, 3kW Dimensions: 2600 x 1600 x 1800 mm Weight: 600 kg Type: Afogrill Serial number: G 004B Year of construction: 2007 Heating: natural gas, 100 mBar Heating power: 216 kW Burners: 3 x 1000 mm Power: 3 x 400V, 50Hz, 3kW Dimensions: 2600 x 1600 x 1800 mm Weight: 600 kg Afoheat conveyor Belt width: 330 mm Power: 3 x 400V, 50Hz, 0.25kW Dimensions: 7850 x 1000 x 950 mm

Product number: 2703 Type: AFOGRILL-oven 1 Serial number: D143/1 Year of construction: 2005 Heating: natural gas Burners: 3 pieces Honeywell Power: 3 x 380V, 50Hz, 3kW Dimensions: 2300 x 1650 x 2750 mm Weight: 750 kg Type: AFOGRILL-oven 2 Serial number: D143/2 Year of construction: 2005 Heating: natural gas Burners: 3 pieces Honeywell Power: 3 x 380V, 50Hz, 3kW Dimensions: 2300 x 1650 x 2750 mm Weight: 750 kg Transportbelt Belt width: 630 mm Length: 7850 mm Power: 3 x 380V, 50Hz, 0.25kW Dimensions: 7850 x 1150 x 950 mm

AFT Sandwich cutter Serial: 135012 Stainless frame, automatically cuts sandwiches into halfs, ensures clean and centered cut on all types of sandwiches, belt width 150mm, overall length 2200, mobile, 3Ph

AFT Sandwich cutter Stainless frame, belt dimensions 2200mm x 150mm, manual wheel to set product height, 3Ph, mobile

AGFA Cutter for SelectSet 5000. Including Belt, Stillage and Knife.Available: now

AGFA Motor for the cutter of SelectSet 5000. Including Belt.Available: now

Fully automatic $ up Thermal CTP AGFA Acento II s (Screen 4300 S) with Multi-Cassett Loader (MA-L) year 2015 Only 52262 plates produced with AGFA PREPRESS RIP with Stacker (Also Cleanout Unit AGFAA Azura avilable)

AGIE AGIECUT CLASSIC 2S wire EDM machine built in 2004 in Switzerland is used for the production of, among others, precision dies, tools and punches. Workpieces with a maximum weight of 450 kg are machined using electrical erosion, which can achieve complex shapes in even the hardest materials. This process is performed in a dielectric-filled work tank using a wire with a maximum diameter of 0.33 mm, which is threaded through a special AGIEJET system. The workpieces machined in this way do not require any other secondary processes such as polishing to be undertaken. The AGIECUT CLASSIC V2 wire EDM machine also features an intuitive CNC control with many useful functions. It is possible to purchase the dedicated cooler shown in the photos at an additional cost – price negotiable. The AGIE EDM machine weighs 2580 kg. Technical specifications of the AGIE AGIECUT CLASSIC 2S EDM machi ...

AGIE AGIECUT EXCELLENCE 2 wire EDM machine built in 1999 in Switzerland, is used in the production of e.g. precision dies, tools and punches. For the machining of workpieces, the machine uses advanced electrical erosion technology which makes it possible to achieve difficult shapes in even the hardest materials. The use of this method further minimises or completely eliminates the need for other secondary processes, such as polishing. The AGIE EDM machine is equipped with a state-of-the-art AGIEVISION CNC controller and brushless axis servo motors to guarantee the highest machining accuracy and precision in the shortest possible time, with low energy consumption at the same time. The machine also comes with among others an integrated generator, a semi-automatic wire threading system and the AGIESETUP 3D measuring probe for automatic detection of the plane and position of the workpiece ...

Agnelli Automatic sheeter Stainless, Automatic sheeter and kneader, Produces pasta sheets, Up to 250Kgs per hour, Stainless 200Kg agitated hopper, 250mm sheets, variable speed, with spare belt, 3Ph

Description: AHT MIAMI FREEZER 185 Model: MIAMI 185 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 1770/1850 mm Depth (inside / outside): 830/990 mm Height (front/external access): 770/830 mm Volume (net): 650 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami is tested but NOT REFURBISHED

Description: AHT MIAMI FREEZER 185 Model: MIAMI 185 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 1770/1850 mm Depth (inside / outside): 830/990 mm Height (front/external access): 770/830 mm Volume (net): 650 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT is refurbished, freezer line is tested and cleaned internally and externally. Ready to use.

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT tested but not cleaned and refurbished.

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT is refurbished, freezer line is tested and cleaned internally and externally. Ready to use.

suitable for nitrogen all stainless steel belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm

AIRPOL K7 rotary screw compressor was built in Poland in 2015. The versatile device driven by belt transmission, provides the user with the highest quality compressed air and ensures uninterrupted operation even during heavy loads. All this is ensured by the compressor’s cooperation with a reliable MARK OP 20 (A3) refrigeration dryer, which removes moisture and water vapour from the compressed air to minimise the risk of corrosion. Combined with efficient ventilation and an oil separation system, the compressed air is also characterised by a very low oil concentration and a slightly higher temperature than ambient. AIRPOL screw compressor together with the dryer weighs a total of 395 kg. Technical data of the AIRPOL K7 compressor - working pressure: 10 bar - engine power: 7.5 kW - capacity: 57 m3/h - refrigeration dryer pressure dew point: +3°C - cooling air requirement: 1200  ...

Akar Makina Truck Builder Machine Model AKR172 Year 2021 Total power: 4.5 Kw Working pressure: 8 bar (120psi) Manual and automatic use TECHNICAL FEATURES PLC controlled precured tread builder for tyres 700 mm (27.5) -1450mm (57) with expandable hub and rim system User friendly easy operation Tyre range: 7.50 R 15 - 12.00 R 24 Expandable rim: 20-22.5x9 included (Other sizes are optional) Three-zone pneumatic pressure application feature Two-mode tire rotation with pedal control Adjustable speed control tread application on tires Controllable stitching and building operation with tread stretching Three-line optical laser centering system CE Certified

Annular distributors in fully automatic mode allow a homogeneous and equal pressure distribution on every hydrocyclone in operation. Annular distributor for 10 hydrocyclones.

Annular distributors in fully automatic mode allow a homogeneous and equal pressure distribution on every hydrocyclone in operation. Annular distributor for 5 hydrocyclones.

AKW Engineering Ltd Compact Spiral Freezers Currently building 4 bespoke compact freezers, using reconditioned top quality stainless steel framework. All belts are 510mm wide. Units are constructed on a hot dipped galvanised sub-frame, for easy transportation and relocation. All with new insulated enclosures and doors. Wiring and all serviceable components are new. All with built in belt wash spray bars. Choices of freezing capacities, evaporators and refrigerants.

ALBERTI 5-axis machining center model POLAR EVOLUTION 3.5 CN: – maximum working range 3500 x 1637 mm – Z-axis stroke 600 mm, thickness machinable on suction cups 160 mm – 2 phenolic resin worktops of 1700 x 1632 mm: for alternating or synchronous machining vacuum free type, with holes connected to the vacuum system, NC-controlled zero points and retractable stops, with 12 blocks of suction cups with double vacuum chamber (without hose) Becker vacuum pump + pneumatic clamps for small parts – Automatic lubrication, optimised and centralised suction – electronic control with TPA and ALBATROS software, visualization program in Windows environment, EDI32-TPA EDITOR (CAD-CAM 3D) – machine in compliance with CE standards, with double front concealed barrier (for loading/unloading of the 2 worktops) and perimeter protections – machine dime ...

Product number: 2853 Type: ADT600NH Serial number: 03604218 Year of construction: 2007 Belt width: 600 mm Power: 3 x 400V, 50Hz, 1.1kW Dimensions: 2800 x 1200 x 1350 mm Weight: 450 kg

Product number: 2909P Type: AGF450-2000-E-ECO Serial number: 03212230 Year of construction: 2019 Belt width: 450 mm Frying length: 2000 mm Heating: electric, 36kW Frying time: 50 - 250 sec Power: 3 x 400V, 50Hz, 52kW Dimensions: 3750 x 1650 x 1600 mm Weight: 1500 kg Hold down belt, circulation pump, oil level sensor, fire extinguisher, Siemens touch panel

suitable for standard crumbs all stainless steel belt width 400 mm with air knife 2,4 kW adjustable speed mobile with outfeed belt dimensions (l x w x h) : ± 2.250 x 950 x 2.300 mm

Product number: 2570 Type: ASP400HDI Serial number: 24908215 Year of construction: 2004 Belt width: 400 mm Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 2.2kW Dimensions: 2300 x 750 x 1500 mm

Product number: 2839 Type: ASP600 Serial number: 08605204 Year of construction: 1993 Belt width: 600 mm Power: 3 x 380V, 50Hz, 0.5kW Dimensions: 2200 x 1050 x 1800 mm

Product number: 2351J Type: ATG1200/2500 Serial number: 03422230 Year of construction: 2020 Belt width: 1000 mm Length: 3400 mm Power: 3 x 400V, 50Hz, 0.5kW Dimensions: 3400 x 1600 x 1200 mm Weight: 325 kg With 600 mm manually retractable infeed piece

Product number: 2676 Type: ATG700/1600 Serial number: 11204214 Year of construction: 2003 Belt width: 700 mm Length: 1450 mm, extendable to 1800 mm Power: 3 x 400V, 50Hz, 0.18kW Dimensions: 1450 x 1000 x 1200 mm Weight: 175 kg

belt width 400 mm all stainless steel adjustable speed with lower and upper belt adjustable upper belt with outfeed belt mobile dimensions (l x w x h) : ± 2.200 x 800 x 1.200 mm