We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Artech HD granulator SG 80 120 with 200 kW. Well suited for EBS, cables, used tires, plastics, AzV. Well maintained machine. Recently overhauled.
used
This BA 40.30 granulator was part of a cable recycling plant. These granulators were used by Tecnoecology and MG Recycling. With a rotor length of 400 mm and a diameter of 300 mm, the granulator can handle up to about 500 kg/hour of old cables. The granulator has its own control box with control panel and can therefore also be used standing alone. The granulator comes with several sieves and knife sets.
used
Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)
used
Low-speed pre-shredder for rubber, plastic, cables, composite material Well suited for exposing material composites, e.g. tires, old cables With integrated safety shear coupling to protect against foreign objects Rotor 600 mm diameter x 1450 mm working width Closed rotor with offset segment blades, mounted on cassettes 24 rotor blades, 2 stator knife rows Swivelling strainer basket, perforations of your choice With pressure device (pendulum swingarm) Drive cable 90- 200 kw
used
HERBOLD Fine Mill PU800 Suitable for soft to medium-hard materials Previously used for plastic fine grinding Grinding discs diameter 800 mm Drive motor 90 kw
used
used
Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw
used
Herbold granulator Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw
used
A 2004 Pallman granulator, model PS8-6 F4/4. Granulators cut plastic scrap down to a consistent flake through a rotor and screen, ready for reprocessing, compounding or sale as regrind. When choosing a used granulator, check the screen size, rotor and blade condition, motor power and feed opening against the material you need to process. A well-matched granulator turns sprues, runners, rejects and post-industrial scrap into a consistent regrind that can go straight back into production or be sold as a reprocessed material. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.
used
• 34 kW, 415 V / 50 Hz, 65.5 A full load current • 528 rpm rotor • Approx. 3,520 kg • Serial no. GSC50502110001 • CE marked • Serviced by Summit Plastics Automation – new blades fitted June 2026 • Fully working – can be seen running • Buyer collects – loading provided at our Wymeswold site, Leicestershire A 2022 Zerma GSC 500/500 granulator – a recent machine, recently serviced with new blades. Zerma granulators are widely used in plastics recycling and moulding shops for turning scrap, rejects and post-industrial waste into clean, consistent regrind. When choosing a used granulator, check the screen size, rotor and blade condition, motor power and feed opening against the material you need to process. A well-matched granulator turns sprues, runners, rejects and post-industrial scrap into a consistent regrind that can go straight back into production ...
used
• German-built AMIS-Zerma machine, 2011 • CE marked • Free-standing control panel (ammeter, start/stop, E-stop) • Fully working – can be seen running • Buyer collects – loading provided at our Wymeswold site, Leicestershire A 2011 Zerma GSE 300/600 granulator. Zerma granulators are widely used in plastics recycling and moulding shops for turning scrap, rejects and post-industrial waste into clean, consistent regrind. When choosing a used granulator, check the screen size, rotor and blade condition, motor power and feed opening against the material you need to process. A well-matched granulator turns sprues, runners, rejects and post-industrial scrap into a consistent regrind that can go straight back into production or be sold as a reprocessed material. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you ...